Mail turn off SSL connection isn't possiple

Hello,
I update from 10.7.4 to 10.8 here and I have a big problem in Mail now:
I use a private IMAP server without SSL connection.
In Mail from 10.7.4 works this fine, but in 10.8 Mail would like a server certificate and an can't turn off SSL connection for the smtp server.
What's the problem?
Anybody can help me?
Sorry for my bad english :-)
Greetings, Bernd

I found a kludge:
Go in SMTP server setup -> Advanced and enable the option use costum port and fill out a port number (exp. 25).
Mail don't ask to an certificate anymore.
I hope, Apple remedy this problem in an 10.8 update.
Greetings,
Bernd

Similar Messages

  • Cannot Set Up Exchange Account in Windows 8/8.1 Mail App - Need to turn off SSL

    Hi there,
    The office I work at is currently running an Exchange 2003 server for mail, and for reasons unknown, it isn't using an SSL certificate.  That will
    be changing some time in the near future, but as a result, I can't set up an email profile for this Exchange account on the Mail app.  On all the various phones I've had (I've used all 3 major mobile platforms), I've been able to uncheck "Use SSL"
    in the initial setup settings, or upon failure to connect to the mail server, save the profile I set up, and uncover more settings after saving that allowed me to turn off SSL.  This isn't the case for the Windows 8/8.1 Mail app.  I can't turn off
    SSL for Exchange in the initial setup part, and I upon failure to connect to the server, cannot save the mail profile.
    Don't get me started on Outlook 2013...our server is too old for it and therefore incompatible, which somewhat unforgivingly bricks the program and requires a multi-step repair...
    So is there any way to fix or get around this SSL setup issue (other than the obvious solution of our IT guys putting on an SSL certificate)?
    Thanks!

    Hi
    I have seen exchange 2003 not working well with the windows 8.1 mail app. generally you would install the cert from exchange 2003 on your pc and mail should work...

  • Why can't my Gmail account on Mail go online when I turn off SSL?

    I need to turn off SSL for my avast! antimalware to scan my messages. This worked fine before, but just recently my Gmail account stopped going online whenever SSL is off.

    Have you tried contacting Gmail tech support?

  • Is it possible to turn off "Internet Connect / Authentication Failed" msgs

    Greetings and thank you for your time.
    My network connect is set up to automatically connect wirelessly or through Ethernet...this is fine.
    However, every time I open my notebook or start it up,
    If my computer cannot connect through those two, (airport is off/no cable attached) it constantly sends the pop-up message: "Internet Connect / Authentication Failed". 3 times over a period of 15min.
    Is there any way to turn this warning off ?
    I am not trying to access a connection & Mail/Safari are closed.
    It makes it frustrating when you arrive at a meeting to start a presentation and you keep getting this popup that blocks all functions till you acknowledge it and click "ok".
    Any suggestions other then turning off auto connect (which I appreciate when I do turn on Airport or plug in an ethernet cable.
    Thank you for any support on this.
    Best regards, T

    Greetings T, and Welcome to the Discussions!
    We just have to find what it is that's tying to connect/call home, and disable it.
    Common examples are Network Time... Set Date & Time Automatically.
    Software Update... Check for Updates...
    Dashboard Widgits & Rss Feeds.
    Automount Shares.
    Mail automatically checking for Mail.
    I( was thinking more when I started, but the Berr is...
    If all that fails, maybe get Little Snitch, it tells you when a program tries to send info to the internet so you can see what's going on in the background!
    http://www.obdev.at/products/littlesnitch/index.html

  • Is there anyway i can put a stop to emails between a set period of time say 10pm - 6am without turning off internet connection

    Is there anyway i can put a stop to emails between a set period of time say 10pm - 6am without turning off internet connection.

    The only ways in iOS would be to stop using push mail or timed fetch mail and switch the account(s) to manual fetch.  That way, you only get mail when you open the mail app. to use it.
    Or, you could selectively disable wifi and cellular data - voice calls and SMS texts would still come through then.
    Other than that, I cannot think of a way to selectively disable email by itself.

  • Turn off Spotify Connect

    How do I disable Spotify Connect?  
    If I've got my tablet (iPad) running the app, I definitely don't want my phone running it and draining the battery with the app running there as well.
    Thanks
    Edit by  
    I've just added a guide on ways of disabling Spotify Connect. Hopefully there will be a way of enabling/disabling the service at will in the future.
    How to disable Spotify Connect
    MODERATOR EDIT:
    Hey everyone, Spotify staff here. Recently we updated the Community Idea "Make Spotify Connect a choice" with the status "Not Right Now".
    If you've installed our latest Spotify app for Android (1.8.0) and you're still having trouble with battery drain please let us know right here. 
    We'd also like to mention these other Connect ideas which are a bit more specific to the Connectrequests you've made in this thread. Please leave your kudos and feedback in those as well if they apply to the reasons you'd like to turn off Spotify Connect.
    [Spotify Connect] Less pop-ups when I change devices
    [Spotify Connect] Don’t automatically synchronize what i am playing across devices
    [Spotify Connect] Add access control on my Connect devices
    If you don't see the idea you'd like to see, please feel free to make a new idea and post a link in this thread. We're keeping a close eye on your feedback and we're actively bringing it back to the right teams. 

    Hi... I have a problem with this as well - I find it incredibly annoying. For example, I was out picking up a pizza and listening to spotify in my car... When I got home my girlfriend began listening to Spotify on her cell phone - and my cell phone began playing music from it because my device was the last selected. If at all possible, I'd like there to be a feature to turn this option OFF entirely. I can't see it being logical to have this on by default. I enjoyed the option that stopped my device from playing completely when someone else was using the same account from another machine, hopefully you can bring this back because it totally makes more sense than the way it is now.
    I don't like the ability with anyone who has access to the account to be able to play music on any device that has the app open as well. This can be quite embarrassing if someone accidentally clicks on your device, say, as you go into a meeting with your phone in your pocket and it begins playing "It's raining men" or something... I hope you can understand my sentiment! Again this can be fixed if you just gave us an option to turn this off entirely for any (or all) device(s).

  • If I have my mail turned off on my iphone 3gs, I cannot reach some of my contacts by touching their phone number, some I can. Why is this?

    When I have my mail turned off on my Iphone 3GS, I cannot then just touch the phone number of a contact and get it to dial.  I leave my mail turned off frequently because of all the spam that comes in.  Seems I should be able to touch dial all contacts regardless whether my mail is turned on or not.  This does not occur with all contacts but some.  Very irritating.

    The "streaming" in iOS 6 is not traditional streaming. When a song is played it is also cached in a non-permanent storage on the iPhone. As you play music older songs will be deleted or you can delete all the music at once by going to Settings > General > Usage, tapping Music, then swiping across "all music" and tapping the delete button.

  • My ipod touch 4th gen froze! blank white screen and doesn't respond when turned off, or connected to my laptop

    my ipod touch 4th gen froze! only blank white screen and doesn't respond when turned off or connected to my laptop!

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • My iphone 3g is stuck on the apple logo and wont even turn off, or connect to itunes. what do i do?

    My iphone 3g is stuck on the apple logo and wont even turn off, or connect to itunes. what do i do?

    I've got the same problem.
    I wanted to download the new itunes version for iphone but it got stuck. I had no choice but disconnecting my iphone. Then I couldn't sync it anymore.
    I switched off my phone by holding down the sleep button but it has never successfully switched off. The round thing still turns.
    I've tried to connect it back to the itunes. This is the error message I get: itunes can't connect to the iphone. Code 0xE8000065. I tried to find out what error message this is but the apple support site I saw didn't mention this error code.
    Can anyone help? Thaaanks!

  • Turning OFF SSL

    Hi
    I am connect to company email server, Exchange and I find turning ON SSL slows sending and receiving.
    Is this true ?
    I tried to turn OFF but I can't as it stuck at 'Verifying'
    can I know turning this ON or OFF ?
    Any suggestions ?

    Use of SSL is determined by your email server - you have no choice.  SSL doesn't slow mail delevery.

  • Http.keepAlive does not turn off SSL session cache?

    Hi there,
    I have a web service client that uses JSSE for making web service calls via https. In an effort to debug problems, I set http.keepAlive to false, I can see from the SSL debug output that KeepAlive timer messages no longer shows up, but I still see text such as "Cached client session" and "try to reuse cached session", etc.
    Should not turning off keepAlive disable the use of persistent sessions?
    Thanks.
    Yan

    They are unrelated features.
    HTTP Keep Alive allows the browser to maintain a Socket to the server and issue multiple HTTP requests over that same socket.
    SSL Session caching is when an SSL Session is assigned an ID, and additional SSL connects may be established with the same ID. These additional sockets then do not need to perform the full SSL handshake, since much of the data has already been negotiated previously.

  • IPhone won't turn off or connect to wifi

    I have the iPhone 4S and recently I have been encountering many problems with it. I don't know if they are problems with the hardware or the software but my facetime hasn't worked in a long time and my phone hasn't connected to wifi in the past two months. Sometimes the wifi turns off and the bar to turn it back on is dim while other times it turns on but doesn't acknowledge anything to connect to. In addition to the wifi troubles, occasionally my phone screen will turn black for a little while and after some time it will just wake up. The apple doesn't show up so I guess that means the phone isn't turning off- just sleeping. Also, sometimes my apps won't load and then my phone will automatically turn off. Occasionally, my touch screen stops acknowledging the fact that I'm touching it and other times my phone won't turn off. I hold down the power button and the phone just goes to sleep. As you can probably tell, my phone has been malfunctioning a lot and it is starting to get annoying. I don't want my apps to be deleted because I have some that are no longer in the app store and they are very valuable to me. My computer storage is too full to back up my phone though. Any suggestions on how to solve my problem without deleting my apps or any of their saved information?
    Thanks,
         A frustrated iPhone owner

    Hard to tell. However, since the iPhone does not have user serviceable components, once you opened the device, you forfeit any warranty or post warranty support from Apple and the forum. You are going to have to try and figure this one out on your own.

  • My iPod Touch  will not completely turn off or connect to iTunes

    I disconnected my iPod and did what you are supposed to do to turn it off.  The little thing that circles round and round before it turns off all the way will not stop.  It won't turn off no matter what I do.  iTunes says it cannot connect to my iPhone (it is an iPod Touch) and that there is some kind of error.  I went through all of the troubleshooter steps including uninstalling and reinstalling iTunes.  What should I do?  Will it fix itself when the battery finally dies?

    - Have you tried resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Placing the iPod in recovery mode and then restoring the iPod via iTunes? For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    For the future. saying:
    "I went through all of the troubleshooter steps"
    Really provides us with no information since we do not know what steps you are referring to.

  • External display turns off when macbook isn't charging...

    I have my old 2007 white Macbook hooked up to an external display. Recently I have been wanting to calibrate  the battery while using it on the external display, but every time I remove the charger from the Macbook the external display will stay on for a couple of seconds then turn off, it will only come back on when I click the mouse or press something on the keyboard, but then it will go back to sleep. Note: when my Macbook is connected to the external display I keep the screen closed.

    When you are looking at the displays in the System Prefs, all you have to do is click and drag the tiny rectangular bar from the main screen to the external monitor screen (this designates the primary monitor).
    Once you've done that, all you have to do is close the lid. Your screen will flash a couple times, but the external monitor will then remain on and working, and you dont need to keep your lid open.
    FYI, I would turn down the brightness of your MBP down all the way (for both the screen and keyboard). I have found that this reduces any heat build up that it may have from running with a closed lid.
    Hope this helps!
    Ben

  • Turn off SSL site on OS X Server

    I am running OS X Server 10.8 and am trying to use my SSL port (443) for a server that. Sadly everytime I run my server I get a resounding error saying that the port is in use. I have turned off my server websites because of this but I noticed that a web page is still being run on both port 80 and my SSL port.
    Here is what is on that webpage:
    How can I completely turn off websites? Is it possible to run a website on just port 80 and not on my SSL port?

    Sorry, I meant OS X Server 10.9.

Maybe you are looking for

  • Network clients can't log in some days...

    but can on others! Since upgrading to Mavericks and Server 3 I have an issue with local network clients not being able to log in to their accounts some days but can on others (yesterday was fine, today a problem again). It seems that quite a few peop

  • I need to run a old scanner with my macbook pro

    Hi I just got an old Imacon Photo scanner, which uses the software "flexcolor 4.0.4 mac". The latest mac OS the software is compatible with would be 10.5.x (leopard). I was wondering, how I could get the scanner going with my set-up: My primary mac i

  • MSMQ in a RODC env?

    hi out there We have a webserver in a RODC DMZ zone where we need to give support for MS MSMQ 5.0. We have installed MSMQ on the webserver (needed to move it from the local RODC to a writeable DC temporarily to do this) but are not able to browse pub

  • Trying to renew Line Rental Saver, unable to do so...

    Hi, I have had a look around but couldn't see a solution. I received an email telling me that my Line Rental Saver would soon run out and I could renew it. I have tried to do so but when I put in my phone number and my Postcode, I get the message. We

  • Collecting data from forms

    I am a convert from MS Expression Web to DW and loving it. I am still learning the ropes however of this app. I have figured out how to create HTML forms and used some Spry in the process. I add a submit button and tested it. No errors occurred so I