Mail unresponsive after wake from sleep.

When my Retina Macbook Pro wakes from sleep, when i go to mail, it will often become unresponsive for a period of a few minutes - if i go and use safari/ other apps, it will normally resume normal use in its own time, alternatively, i must force quit and reopen to gain use of mail again.
I cant think of any configuration changes which caused this problem to begin, not after any particular software update of anything, am running the most up-to-date version of Mountain Lion - is anyone else seeing this problem and have a solution?

my problem on mail, is that sometimes when i quit it (cmd + Q) it will not quit. although the mail window is gone, but the app is still running in background. and i have to force close it only i can re-open it. and if i didn't force close it, i can't turn off my mac. using MBPr as well in Mountain Lion. really hoping for a solution to this problem.

Similar Messages

Bluetooth Unresponsive After Wake from Sleep

I have an issue where when my macbook pro wakes from sleep, the bluetooth mouse will not connect, and BT becomes unresponsive. Sometimes I can turn bluetooth off then back on and be OK, BUT 95% of the time, I have to restart the computer to get bluetooth back.
After waking, the BT appears to be on, I get the popup on the screen which tells me "connection lost" with a picture of a mouse. I can open BT preferences and turn BT off, but nothing happens. I can even recheck "on" but it is completely unresponsive.
Things tried:
Allow BT to wake this computer is UNCHECKED
in activity monitor I have forced quit BLUED, but BT does not come back.
I have trashed the BT preference file Mac HD/library/preferences/com.apple.bluetooth.plist
I have reset SMC and PRAM
Tried a Logitech V470 and mighty mouse
Fresh install of 10.6.0, then upgraded to 10.6.1, then 10.6.2 (using combo)
Tried disabling steermouse, fresh batteries, holding my mouth right...
When the BT is not responding, the BT name either changes to 2.2.4f3 (which is the Apple BT software version), or it says "name not available".
Also in system profiler, when BT is not responding the BT "Hardware settings" section is missing. It starts with "services".
This is driving me crazy. Could this be hardware related? I feel it is more software, since on restart, the BT mice pair perfectly and work great. The never randomly disconnect.
This issue only happens when the computer resumes/wakes from sleep.
Everyone please provide feedback. I am the only one with this issue? I have scoured the net, and find very little regarding this exact issue. I am within my 90 days from buying, should I call Applecare or is it a waste of my time?
Thanks for your help,
Jeff
Spec's:
mid-2009 aluminum uni-body, Intel 2.66Ghz, 4GB Ram, 320GB HD
Snow Leopard 10.6.2 (Clean install to 10.6, then upgraded)
Login items: Steermouse, PleaseSleep, and Windows Live Sync
Also running at startup, but not in Login items: Paragon NTFS, Flip4Mac,
MacFuse, LogMeIn

I've got what sounds like the same problem with my new unibody MacBook Pro.
I've had the problem with both 10.6.1 and 10.6.2.
I also find that a reboot fixes things. In my case, I can sleep/wake multiple times with
no problem, but once the BT goes unresponsive upon wake, every subsequent sleep/wake
will suffer the problem until I next reboot.
I also discovered that in my case I can re-pair the non-responsive devices (two flavors
of Logitech mice and an Apple wireless keyboard) while in sick-BT mode and they will
work until I next sleep/wake, whereupon they will again fail to connect and my
choice is either to re-pair yet again, or reboot and have the problem go away, at least
for awhile.
I'm trying to correlate my activity with my BT going out to lunch, but have yet to narrow
it down definitively. I have one or two data points that make me suspect it goes south
after I use VMware Fusion (Version 2), but I cannot yet rule that one completely in or out.
/Kevin

BUG: Sandisk USB flash drive in "half-mounted" state after wake from sleep

My Sandisk Cruzer Crossfire 4GB Flash Drive is left in a half-mounted state after wake from sleep. The Finder believes the drive is still mounted, the icon is on the Desktop. However opening a file on the drive, or trying to eject the drive, results in a long beach ball, followed by a message that I removed the drive without Ejecting it first. The same drive continues to work fine on my Tiger machine, and on PCs.
Bug Report:
Setup:
Macbook 1st Gen (2.0 Ghz)
Mac OS X Leopard 10.5 Clean Install
Sandisk Cruzer Crossfire 4GB USB Flash Drive (in either port)
Repro:
Plug in the drive.
Close the MacBook to put it to sleep
Reopen the MacBook
Result:
The lights on the flash drive never light back up after wake from sleep. Navigating the drive, or trying to eject it results in a "you removed the device without ejecting it first" message.
Expected:
Drive should still be mounted and accessible after waking back up.

It may be a design flaw in the device. Mac OS X does a lot more power management than most other OSes, including tearing devices down to little or no power during sleep. It is possible that the device simply misbehaves due to corrupted memory state or reports a substantially different GUID or something similarly bizarre upon wake. (Okay, that last one wouldn't technically be a power management issue....)
If it doesn't have any problems except when sleeping the system, I would just make sure I unmounted it before putting the machine to sleep and wouldn't worry about it. Maybe check with Sandisk to see if they have a firmware updater for the device.

My Mac Pro loses network connection after wake from sleep since Yosemite upgrade.

Mac Pro loses network connection after wake from sleep since Yosemite upgrade. Any one have this issue as well. And is there a work around?

Wi-Fi?
Wi-FI connection drops
Wi-Fi Problems in OS X Yosemite
Wi-Fi Problems in OS X Yosemite (2)
Wireless Diagnostics
Also try turning off Bluetooth.
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)

Left USB-Port dead after wake from sleep. Just restart helps.

I hoped Apples keyboard-Update today would solve my biggest hate-bug in this buggy POS called Leopard. It didn't.
As usual on my Leopard-Macbook Pro, no device will work on the left USB-Port after I waked the computer from sleep. Just a restart helps. I hoped this update to solve this, because it replaced among others "IOUSBFamily.kext".
Terminal gives a timeout error for the internal USB-Hub after wake from sleep. I assumed this should be related.
I'm really angry now.
When will Apple solve the most urgent problems in Leopard?
Was 10.5.1 just smoke and mirrors to make (fool people into...) people upgrade who intended to wait until the first maintenance-update?
Was Leopard Apples attempt to make Windows-Users more comfortable by putting in some heavy extra-bugs and blue screens?
FIX IT FINALLY! And f... don't wait for Macworld to release 10.5.2. It's desperately needed and the current state of Leopard will leave some people very sad at christmas after getting their first Mac. First impression counts and many more peoples first contact with the Mac will be at christmas...

Apple knows the problem and for some reason they are stumped on fixing it. this is so bad I can't believe it. On my macbook pro with Leopard installed, USB left port is dead after sleep. Only restarting can power it back up. I have to restart every day to use my external hard drive for time machine or when putting my flash drive in the port.
Come on already Apple. This is a SERIOUS, SERIOUS problem.
Fix it.

System unresponsive after waking from sleep

I've been looking at G4 dual 1.25ghz MDD, which for ages has been impossible to wake from sleep without a hard restart.
Anyway, we've done a complete erase, reformat, re-install 10.4.11 which has cured the problem almost, but not entirely.
The computer now merrily goes to and wakes from sleep, with the display reappearing and the cursor visible and active, but the system is completely unresponsive for about 20 seconds, then it is back to normal. Any attempt to click on a dock icon in that period leads to a bouncing icon, but the application will not launch. After about 10 seconds of this the system will completely stop, except that the cursor will still freely move around the screen.
Checked the ram, zapped PRAM, NVRAM, PRAM battery is not that old and should be ok, but I haven't yet tried with a fresh one, no other USB or FW devices attached, monitor attached by VGA.
Anyone got any other ideas?

Reset PMU ? Although from what you say, it's doesn't look like a PMU problem.
Could be AppleTalk restarting, or something else that stops when you put the Mac to sleep.
Many MDD users had a similar issue when wakin g from sleep, usually with an ADC monitor, rather than VGA or DVI, requiring the PMU reset as the MDD had to power up the monitor too (not on it's own power supply as it is with DVI / VGA) and it would have trouble doing so.

Bluetooth devices lagging after wake from sleep sometimes.

I have the Apple bluetooth keyboard, magic mouse, and magic trackpad. All batteries are charged and I have tried others by the way. This issue only happens sometimes, as it has happened before, but stopped for a few months, and now happened again tonight. What is happening is that my laptop (macbook late 2009 with mac os x 10.7.2) wakes from sleep (all default energy saver settings set and I am able to wake the macbook with any of the bluetooth devices), and my bluetooth devices mentioned above are laggy for about 15-45 seconds. What i mean by laggy is that when moving the mouse across the desk after the login screen is already fully loaded, it jumps and is clearly not tracking like it usually does. The bluetooth trackpad and keyboard experience this same issue.
Now the thing that leads me to believe it's bluetooth or software is that my macbook's built in keyboard and trackpad do not lag and function correctly as soon as the computer is woken from sleep and prompts me with my login screen. This also leads me to assume that it's not my computer running slowly or having too many processes or not enough memory. This problem happens even if I have no programs running (other than OS X's default processes). I have taken my macbook into the Apple genius bar thinking it was a bluetooth hardware issue, but they ran checks and confirmed that it was not and obciously, we could not get the issue to reproduce their at that time. I would love to hear from anyone who has experiecned this before, or is currently. We need to get Apple's attention with this issue because they have not listened to me when I submit a feekback form. This has been happening since 10.7.0 by the way. Thanks and happy holidays.
macbook 6,1
8gb memory
mac os x 10.7.2 (happened on 10.7.0, and 10.7.1)
-I can wake my macbook with my bluetooth devices
-My built in macbook keyboard and trackpad do not experience this issue
-I don't see the "connected symbol" when the computer wake (everything is already connected)
-All default energy saver preferences set
-Using apple's rechargeable batteries for all three devices
-minimal processes running
-devices function as normal after 15-45 seconds (it's not my desk)

I've got what sounds like the same problem with my new unibody MacBook Pro.
I've had the problem with both 10.6.1 and 10.6.2.
I also find that a reboot fixes things. In my case, I can sleep/wake multiple times with
no problem, but once the BT goes unresponsive upon wake, every subsequent sleep/wake
will suffer the problem until I next reboot.
I also discovered that in my case I can re-pair the non-responsive devices (two flavors
of Logitech mice and an Apple wireless keyboard) while in sick-BT mode and they will
work until I next sleep/wake, whereupon they will again fail to connect and my
choice is either to re-pair yet again, or reboot and have the problem go away, at least
for awhile.
I'm trying to correlate my activity with my BT going out to lunch, but have yet to narrow
it down definitively. I have one or two data points that make me suspect it goes south
after I use VMware Fusion (Version 2), but I cannot yet rule that one completely in or out.
/Kevin

Crashes after wake from Sleep after 10.8.1 update

2.5 Ghz Mac Mini (mid 2011), 8 Gigs of RAM
Since the day I upgraded to 10.8.1 I have had persistent crashes, 1 every 24 hours or so. It's always shortly after a wake from sleep. In all cases, it is impossible to switch to a random open application. But once I hit that application, no other application will respond to anything, including a Force Quit, or if it will force quit, it won't relaunch. A shut down will hang because an app refuses to quit. I can quit the Finder, but it won't relaunch. Have reinstalled Mountain Lion twice, zapped the PRAM, reset the SMC, checked and extensively tested the HD and RAM. Replaced RAM with original Apple RAM. Didn't help, so I swapped back to the RAM from Crucial. I can't think of anything else to try. Machine does not crash unless it has been asleep. Runs flawlessly when sleep is disabled. After a reboot (usually via a shut down via the power switch, start from scratch, check of the HD integrity, and then a clean restart) the machine will run fine, sleep and wake normally for about 24 hours. As near as I can tell from the logs, the hangs usually begin right after the Time Machine Backup after a wake from sleep finishes. If I don't allow the machine to sleep, there are no problems of any kind. Making me crazy. Did not occur under Lion or the .0 version of Mountain Lion. Is making me crazier than I normally am which is sorta serious.

Any solutions to this problem? I too have this kernel panic, however it only happens about once a week. Always upon wake from sleep as you've indicated.
FYI I don't have intego software, or an APC installed. Nor am I using filevault.
This is on an up to date, MacBook Pro Retina.
Robert

Trackpad unresponsive after waking from sleep with new 17" MacBookPro

We have two 17" MacBookPros and both have this symptom. After waking from sleep or booting, the trackpad is unresponsive. Eventually full control comes back to the trackpad but it takes a while.
Both computers are up to date with all software.
Any thoughts?
Really irritating.

Perhaps they are freezing for awhile? Maybe basic repairs are in order.
Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them. Disk Utility's Disk Repair is not perfect and may not find or repair all directory issues. A stronger utility may be required to finish the job.
After that Repair Permissions.
No need to report Permissions errors....we all get them.
 DALE

After Lion upgrade, having network issues after wake from sleep

After upgrading to Lion from 10.6.8 on my MacBook Pro (15-inch, Early 2011), I am unable to connect to the Internet after the computer wakes from sleep. I should rephrase this - I am able to ping IP's and DNS (DNS servers are present) however none of my apps will connect (Safari, iChat, etc) -> they all indicate the Internet is unavailable. I have two Airport Express's running 7.5.2 extending a WiFi network off an Airport Extreme running 7.5.2. This issue is specific to waking from sleep. Any thoughts or suggestions would be appriciated.

It's definitely linked to Time Machine and backups.
I think If I put my machine to sleep/close the lid and Time Machine happens to be performing a backup, when I open the lid again, the network connection is lost and I receive a bunch of errors about the backup disk being unavailable.
This means that if my mbp isn't in the middle of a backup when I put it to sleep, wifi comes back up without a problem.

10.9.4 update causing internet browsing errors after wake from sleep

Macbook Pro Late 2011, OS X 10.9.4
So before the 10.9.4 update, I had no problems with Wifi and wake from sleep.
Now, after the update, random web pages either don't load (Chrome & Firefox) or return a "Memory Not Allocated" error (Safari). Also, my Work VPN application stops being able to connect. The related Console error is:
acvpnagent[104]: Function: getInterfaces File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1277 missing PPP destination address for interface "utun0"
The only solution I've found is restarting.
Any ideas?

Remove the Cisco VPN client. Use the built-in client, if possible.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and (unless otherwise specified in this comment) I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

Abnormal Start-up Screen Appearing after wake from Sleep Restart

I have started to have this problem with my MacbookPro where I will come back and wake try and wake from sleep and nothing. The computer is off or unresponsive. Upon restart I get an abnormal start up screen which looks like this image that I snagged with my camera:
http://www.creativetantrum.com/screen.jpg
In all my years of using a Mac I have never seen anything like this. And the MBP never gets pass the screen I have to hard restart and it launches into this screen:
http://www.creativetantrum.com/startup.jpg
and runs through to the login screen.
Previously I have tried resetting the PRAM and SMC(?) as well as running Cocktail on the machine. Those sequences seemed to resolve the issue for at least a day. The only thing I have done that I can think may have caused this is I play a game called "Ouba" that runs in 640 x 480 or some low resolution that the MBP seems to resemble upon restart.
Also upon restart I am given an opportunity to send Apple a message regarding the crash. Here is what it sends:
panic(cpu 0 caller 0x001A49CB): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x5f5e1a64, CR3: 0x01334000, CR4: 0x000006e0
EAX: 0x00006739, EBX: 0x0040d4c1, ECX: 0x00000320, EDX: 0x00006720
CR2: 0x5f5e1a64, EBP: 0x47e93b58, ESI: 0x5f5e1a64, EDI: 0x00000006
EFL: 0x00010006, EIP: 0x0037f240, CS: 0x00000008, DS: 0x00000010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x47e93888 : 0x128d0d (0x3cc65c 0x47e938ac 0x131f95 0x0)
0x47e938c8 : 0x1a49cb (0x3d2a94 0x0 0xe 0x3d22b8)
0x47e939d8 : 0x19b3a4 (0x47e939f0 0x0 0x47e93a08 0x131f48)
0x47e93b58 : 0x37f719 (0x109380 0x5f4e6000 0x0 0x9)
0x47e93c18 : 0x1ac378 (0x3190ca1e 0x2304 0x0 0x120)
0x47e93c48 : 0x61a3ce (0x61a1ae 0x3 0x64b160 0x0)
0x47e93ca8 : 0x60f446 (0x65d8600 0x2 0x47e93c7c 0x0)
0x47e93cc8 : 0x3ac373 (0x6632300 0x4b063c 0x3 0x4ef000)
0x47e93d08 : 0x3bb728 (0x65d8600 0x3f2688 0x6608f48 0x3920b5)
0x47e93d48 : 0x394a8f (0x6608b00 0x4 0x1d 0x2)
0x47e93d88 : 0x394fc5 (0x6608b00 0x0 0x47e93dc8 0x0)
0x47e93da8 : 0x395ea4 (0x6608b00 0x654fc00 0xb 0x1)
0x47e93de8 : 0x394fee (0x6608b00 0x6651780 0x47e93e28 0x0)
0x47e93e08 : 0x395ea4 (0x6651a80 0x654fc00 0xb 0x1)
0x47e93e48 : 0x394fee (0x6651a80 0x6695200 0x47e93e88 0x0)
0x47e93e68 : 0x395ea4 (0x6695e80 0x654fc00 0xb 0x1) Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleACPIPlatform(1.0.10)@0x60e000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5fa000
dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x60a000
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB
Graphics: GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.3.5
Bluetooth: Version 1.9.5f4, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: FUJITSU MHW2160BHPL, 149.05 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, Apple Inc., Up to 480 Mb/sec, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 1.5 Mb/sec, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., Up to 12 Mb/sec, 500 mA
Any help would be fantastic.
Thanks.

the settings are done via Terminal commands or through a widget (i know there is "deepsleep" and i think another)
you should be able to find the terminal command through reading about the different sleep modes, if not try goggling "changing sleep mode on mac" and that should show you. if you cant find it let me know and ill try to dig it back up.
the MBPs are standard with safe sleep, the older lap tops used quick sleep. there is not way to change them through the standard system in a GUI, it has to be done via code (very easy because you can just copy and paste it in)
-matt

Connection Lost After Wake From Sleep

I am using a Macbook Pro and Linksys WRT150N W/L router. Every time my MBP wakes from sleep, I lose my internet connection. My menu bar still shows that I'm connected to the network, but I lose all connectivity. I cannot connect to internet or my router settings unless I do a complete restart. Network preferences shows connected to network but no connection to my router IP address under TCP/IP tab in the advanced settings. I also have a drop out of signal a few times an hour. My iMac DV does not experience the drop outs or connection loss at anytime. I have reset my router numerous times and used default factory settings all with the same results. Does anyone have an idea what the problem may be? Thanks.

I was always experiencing drop outs as far as what my signal was showing in my menu bar. It would drop out even if I was on top of my router. I had upgraded to 10.4.11 and the day after I did that, the problems started. I thought I might as well upgrade to 10.5 to see if that might help it. I think the 10.4.11 had done something to my W/L card and upgrading to 10.5 wouldn't have helped it unless I upgraded from 10.4.10 to 10.5, skipping 10.4.11 all together. I'm gonna bring my router and MBP into the genius bar and see what they can tell me about. Thanks for replying. I'm glad and sad to hear that I'm not the only one experiencing these symptoms.

No IPv6 after wake from sleep

Hello,
     When my MB pro wakes from sleep there is no IPv6 connectivity. In order to restore IPv6 I need to stop/start the Thunderbolt Ethernet adapter (make service inactive/make service active) or reboot.
     Details on my configuration:
     OS X 10.9.2
     Thunderbolt Ethernet Adapter used for network connectivity (Wi-Fi OFF)
     Native IPv6 network (not tunneled)
     IPv6 and v4 manual config (no DHCP or SLAAC)
     Dual stack TCP/IP configuration
     IPv4 works
     IPv6 works until MB goes into sleep mode
ifconfig
en2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
          options=10b<RXCSUM,TXCSUM,VLAN_HWTAGGING,AV>
          ether a8:20:xx:xx:xx:xx
          inet6 fe80::aa20:xxxx:xxxx:xxxx%en2 prefixlen 64 scopeid 0x4
          inet6 2001:xxxx:xxxx:1::2 prefixlen 64
          inet 8.x.x.2 netmask 0xffffffc0 broadcast 8.x.x.63
          nd6 options=1<PERFORMNUD>
          media: autoselect (100baseTX <full-duplex,flow-control>)
          status: active
^---- Looks good (to me).
netstat -nr -f inet6
Internet6:
Destination                             Gateway                         Flags         Netif Expire
default                                 2001:xxxx:xxxx:1::1             UGc             en2
::1                                     ::1                             UHL             lo0
2001:xxxx:xxxx:1::2                     a8:20:xx:xx:xx                  UHL             lo0
fe80::%lo0/64                           fe80::1%lo0                     UcI             lo0
^--- This looks good too (to me).
Ping my Thunderbolt Ethernet Adapter
PING6(56=40+8+8 bytes) 2001:xxxx:xxxx:1::2 --> 2001:xxxx:xxxx:1::2
16 bytes from 2001:xxxx:xxxx:1::2, icmp_seq=0 hlim=64 time=0.129 ms
16 bytes from 2001:xxxx:xxxx:1::2, icmp_seq=1 hlim=64 time=0.233 ms
16 bytes from 2001:xxxx:xxxx:1::2, icmp_seq=2 hlim=64 time=0.225 ms
16 bytes from 2001:xxxx:xxxx:1::2, icmp_seq=3 hlim=64 time=0.227 ms
^--- Yay!
Ping the default route
PING6(56=40+8+8 bytes) 2001:xxxx:xxxx:1::2 --> 2001:xxxx:xxxx:1::1
ping6: sendmsg: No route to host
ping6: wrote 2001:xxxx:xxxx:1::1 16 chars, ret=-1
ping6: sendmsg: No route to host
ping6: wrote 2001:xxxx:xxxx:1::1 16 chars, ret=-1
ping6: sendmsg: No route to host
ping6: wrote 2001:xxxx:xxxx:1::1 16 chars, ret=-1
^--- Boo
This causes problems for IPv4 as well because apps like Firefox and Safari try using the IPv6 DNS servers and give up before falling back to the IPv4 servers. So this problem breaks more than IPv6.
Is this a bug or do I have something misconfigured?
Thanks.
                               --Tom

I see this (sort of) behaviour as well. When I look into the tcp/ip tab of the network (system prefs) I see
fe80::1:1 as router, that is why v6 stops working. After turning v6 off and on again the correct router IP appears.
NB. this is on wifi
Rudi

Finder stall after wake from sleep w/USB flash drive mounted

Has anyone else experienced this? iMac works flawlessly while USB flash drive is mounted UNTIL iMac sleeps. Then as soon as the iMac wakes from sleep the finder is non-responsive (perpetually spinning beach ball) and other apps slow to a crawl and become non-responsive as well if they need the finder (i.e. to save, etc.). This only happens when the USB flash drive is mounted.
Trying to force quit (relaunch) the Finder does not work, I always have to perform a hard restart.
I have an external FireWire hard drive that works beautifully and does not cause these same symptoms.
Any ideas?

umm.. don't let the computer go to sleep with your jump drive connected? The mac will usually take a few seconds to get his gear together after waking up from a sleep sounds like he is having to gather additional things since the jump drive is in there. I don't have a REAL solution except don't let Mr. Mac sleep with the jump inserted....

Mail unresponsive after wake from sleep.

Similar Messages

Maybe you are looking for