Mail vanishes when settings are changed

I was recently required to change my mail settings to access my at&t mail account. When I did so, the body of all of emails sent and received prior to changing my settings were no longer visible. When I tried to rebuild my mailbox, the pre-change settings emails were gone completely; all 4,000+ emails received prior to changing my settings were simply gone. I assume they are still on my harddrive somewhere. How can I get them back?

Thanks for the response but it turned out to be a basic problem in that basic had turned off and i hadn't noticed in my rush to process some shots quickly - a coffee and a few deep breaths and a good look at what was on my screen solved the problem.

Similar Messages

Since the latest software update, every third or so time I turn it on, my sounds settings are changed and I cannot listen to anything-music, YouTube, nothing. I can sometimes change something and it will work, but right now nothing is working. Anyone else

Since latest software update, my sound settings are changing sometimes when I turn on and cannot hear anything. All controls are useless and cannot be activated. After changing several things, I have been able to make it work, but today nothing is working. Anyone else experience this and have any ideas?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Settings are changed I can't go to settings accessibility

My touch settings are changed.
I am unable to go to settings accessibility
I want to deactivate the voice over

And if that too doesnt work, connect to iTunes and configure: http://support.apple.com/kb/HT4064

CS6 crashing when sequence settings are changed

When I launch CS6 and select a new doc - it had default settings for the sequence. When I change them to DSLR - or anything but default......CS6 crashes, does not say why & shuts down. Tried changing them after setting everything else - same result.
Running a HP 8770w Elitebook
32G RAM
SSD primary
twin SATA's raided
nVidia K5000M (supported_cuda_card.txt in Adobe changed to read Quadro K5000M)
Any thoughts? I cannot get PPCS6 to run anything if I change the setting.

I'm sorry if I was not clear. I was referring to sequence presets. If you do not choose the proper one BEFORE working it screws up the footage. Sure, you can change the presets once working - but that crashed it too. Loved the comment though!!
On a fresh load of CS6 - the default sequence preset settings are other than DSLR - which is what I use. SO, you either change them in the first window, or do so after the sequence is open & running. Neither would work and crashed out as soon as you touch a button other than the default camera setting. We tried a number of different approaches to get the proper setting loaded. Nothing.
It turns out it's all an Adobe/nVidia issue. CS6 Premiere does not dig the Quadro K5000M.
But, after repeated attempts we found a workaround.
Fresh install of CS6 - restart
Edit the cuda_supported_cards.txt file as described in these Forums. Restart
Hack the card itself - restart
launched CS6 Premiere Pro & not only is the card there - but fully operational.
Results of speed tests in HD & 4K were amazing - this is realtime editing - finally.

Iphone 5s mail account server settings inadvertently changes

I have a 2009 Mac Book Pro (Mavericks 10.9.4) a 2014 iPad Air and iPhone 5s both on the latest iOS (7.1.2).
I have been having problems getting my iPhone mail server settings to remain as they are set up, and as recommended by my telco provider (Vodafone)
I want my iPad and MBP to be able to access my mail over wifi by being tethered to me cell phones 4G internet connection. I have gone through the set up with my telco on numerous occasions deleting and resetting server details but have never been able to get a stable set up.
For some unknown reason the mail server account settings on my iPhone get changed automatically with the addition of a duplicate pop.3 account, but with the same email and password yet a differently spelt user name. My telco say this is a fault with my recently purchased new iPhone or the most recent apple software rather than something that is a fault at their end.
Is there anything I can do to my phone to rectify this problem or is it as I assume a problem in some way with my account details with my telco?

Hey karellan78,
Thanks for the question. You are in luck! We have a resource that deals with this specific issue. If the issue is isolated to your Gmail account, you may need to unlock the account from Google’s website:
iOS: Gmail account will not connect to Gmail server
http://support.apple.com/kb/TS3058
Resolution
1. Check that your device is connected to the Internet by opening Safari and loading a webpage, such as google.com. If you cannot connect to the Internet, try the steps inthis article.
2. If you have other email accounts on the device, check if those accounts can send and receive email.
3. If the issue is isolated only to the affected Gmail account, visit this website:https://www.google.com/accounts/DisplayUnlockCaptcha.
Complete the form to unlock the account.
4. If the issue persists, follow this Google support article.
5. Once the account has been unlocked, or the correct password entered, check that the issue is resolved. If not, remove the affected Gmail account from the device and add it to the device again: Settings > Mail, Contacts and Calendars > Add Account > Gmail.
Thanks,
Matt M.

Can no longer send or get mail. All settings are correct. Worked fine before.

I can use a secondary account but not my primary yahoo.verizon account. Verified all settings are correct but the password was erased. After re-entering password a message says I have to verify my password by entering it at www.yahoo.com. However, I DO NOT have a Yahoo email account. It is a Verizon email account partnered with Yahoo.

OS X Mail: Troubleshooting sending and receiving email messages

Auto mail triggering when BOM is changed -reg

Hi ,
We use change management for BOM changes
our requirement is when BOM is changed for a part ,it shoudl trigger mail to predefined user mentioning the BOM change
for example if for a part A bom is changed a mail communication should be triggered to the parts MRP controller
how we have to go further
please provide some valuable inputs
regards,
madhu kiran

Dear Madhu Kiran,
Along with our experts reply,I would like to share that this same requirement was achieved in one of my
project ,but we were using ECM,then developed a report to find out the exact changes happened between
a period and for a particular Change number for the BOM components and we scheduled the job in SM36
by specifying that development's program name and including the User's mail Id under Spool Recipient's
name.
So its a big process if you follow the above procedure.
Check & revert back.
Regards
Mangalraj.S

Project Server 2010 - Once individual settings are changed is there any way to save this down for each person

A timesheet submitter sets certain filters and "group by", the timesheet is then sorted according to those filters and groups. Once time sheet is saved & Submitted the filters/groups are changed back to the default for any subsequent time
reporting periods. Is there any way to predetermine the Filter=No filter and Group by=Project for all timeperiods.

For specific users not possible, however if you know many people use Timesheet in a specific way you might want to consider generic timesheet view which users can choose.
Hrishi Deshpande Senior Consultant

Recover Replication Environment when we are changing Hardware

Hi All,
I have posted this question in Database Replication head but didn't receive any reply thats why I'm posting the same question here too.
I've implemented replication between two locations in oracle 9i and it is working perfectly alright for last one year. Now at one location (at snapsht site) I have to change the server hardware and I have to put a new IBM server. I'll have to install Oracle 9i on new Server but I think if I export data from old server and if I import it in new server then I believe replication will not work.
what is way to use the same replication setup on new server without doing setup of creating Master site on one server and snapshot site on new server.
I think I'm clear in my question.
Thanks
Praveen Arora

Are you changing hardware platforms as well as the hardware? Or are you going from one AIX box to another?
If you have the downtime window, and you are staying on the same operating system, the easiest option would generally be to shut down the snapshot database, do a cold backup, restore the backup to the new server, and start up the snapshot database. If you don't have the downtime window for this, or you are changing operating systems, you'd generally be looking at rebuilding the snapshot database on the new server and having two different snapshot databases running for some period of time before you do the cutover.
Justin

Recover Replication when we are changing Hardware

Hi All,
I've implemented replication between two locations in oracle 9i and it is working perfectly alright for last one year. Now at one location (snapsht site) I have to change the server hardware and I have to put a new IBM server. I'll have to install Oracle 9i on new Server but I think if I export data from old server and if I import it in new server then I believe replication will not work.
what is way to use the same replication setup on new server without doing setup of creating Master site on one server and snapshot site on new server.
I think I'm clear in my question.
Thanks
Praveen Arora

Are you changing hardware platforms as well as the hardware? Or are you going from one AIX box to another?
If you have the downtime window, and you are staying on the same operating system, the easiest option would generally be to shut down the snapshot database, do a cold backup, restore the backup to the new server, and start up the snapshot database. If you don't have the downtime window for this, or you are changing operating systems, you'd generally be looking at rebuilding the snapshot database on the new server and having two different snapshot databases running for some period of time before you do the cutover.
Justin

CC programs freeze when mouse settings are changed to left hand use

Hi everyone,
I have a little problem with several CC programs, when the mouse setting is changed to letf hand use for one user.
We are running Windows 7 x64 Professional and the latest version of Adobe CC 2014 of Photoshop and Illustrator.
When the user works with large files, the CC program (Photoshop in most cases, but e.g. Illustrator as well) freezes, the only window that works then is the window of the file that is open at the moment. Windows of other files are not clickable . When the taskmanager is opened then the other windows become clickable again. But when the user clicks somewhere, for example on the desktop a right click is a left click. that stops when a the left mouse button is clicked, than it works again.
The problem appears once or twice a day. When we change the mouse settings back to normal everything works fine.
I appreciate any hints and help
Thanks,
Andre

I tested them all.
As I already mentioned above: I just don't use the Touch and Launch Tool. I prefer to use only the extended functions of the usual Toshiba driver (as the extended corner functionality or the Easy Launcher). I know that I can set the mouse speed there. (that's what I did) But I?m already at the maximum speed and moreover there?s no possibility to increase the mouse acceleration. That?s why I?d like to change this in the usual windows-settings window.
For the moment I placed a shortcut to the mouse settings in the autostart folder. So every time I start up, I can change the settings immediately. But of course this is no long-term solution.
By the way: My goal is to have as less tools and running software as possible on my computer, because I use it for music production and a really need all resources I can get!!

PC settings are changed when Syncing

Can someone tell me how to stop the PC settings changing everytime I plug in my Iphone. My screen saver doesn't even work now, it tells me I need a updated video card to run the screen saver. Weird!

Hello elindi,
And welcome to Apple Discussions!
Although this article is a little dated, it references another article that may be of interest. Might not hurt to take a look.
http://support.apple.com/kb/TS2280
Another idea would be to try and update and/or re-install the iPod's drivers using the information in this Apple support document.
http://support.apple.com/kb/ts1538
Lastly, make sure your PC's BIOS is up to date as well just for good measure.
B-rock

Flash play freezes when settings are opened

For some time, when I access my flash player settings thru my
web browser, it freezes. I cannot advance to any tabs or select
anything, nor even close the settings window.
The settings that were saved from when it worked are no
longer saved so when i go on a site like stickam and attempted to
turn on my webcam, the settings window opens asking me to allow and
it freezes, thus forcing me to have to close the window.
can anyone help me?

I did not notice that I was in full scree mode. Yes that the issue, out of full screen it works like before.
Thanks a lot for the hint.

Correct values not flowing in MIRO when values are changed in J1IEX

D/ Friends,
In Purchase Scenario with mov typ 101, when we capture excise duty thru T.Code J1IEX, sometimes we need to change the Duty Rates as well as Excise base Value (i.e.***. Value). We change these 2 things & we also change the BED, ECess & SH Cess values manually. Thereafter we do GRN & then post the EI.
Now the issue is that when we do MIRO, the duties Posted in EI in J1IEX, are not flowing in MIRO. Pls note that such scenario is occurring only when we change the above 2 things in J1IEX. Pls advice.
Rgds.

pl check excise defalt for your tax procedure JCV1 condition assigned or not.
regards
karthik

Service Desk: E-Mail notification when processor is changed

Hi experts,
At the moment I'm implementing a Service Desk scenario. I want to send a e-mail notification to the NEW processor of a service desk message when the processor is changed in a message.
An example:
User A is the current processor of a message. He's no longer responsible so sets User B as message processor, so User B is the new processor and should get an E-Mail-Notification.
My actual problem is to get a helpful condition configuration which checks if the old processor is not equal to the new processor, could you help me with this topic?
Thanks in advance!

Hello Werner
I think they worked out a solution to the same problem in this thread.
Support Desk - Send an email to the message processor
Hope that helps!
Regards,
Paul

Mail vanishes when settings are changed

Similar Messages

Maybe you are looking for