Mail will not allow me to move mail to the trash

For some reason Mail has stopped letting me move mail to the trash. Instead all deleted mail is grayed out. I checked the box to move deleted mail to trash, but that still does not work. The mail stays in the inbox, but a copy is moved to the trash. Has anyone ever had that problem?

I had to just delete my mail account and start over.

Similar Messages

  • After installing ios5 and having had to change my apple id to e-mail address I am unable to download updates as they were purchased under my previous id and it will not allow me to get back into the old id  Help please.

    After installing ios5 and having had to change my apple id to e-mail address I am unable to download updates as they were purchased under my previous id and it will not allow me to get back into the old id  Help please.

    Make sure you enter your new Id in settings/message, settings/facetime.  ANy content that you downloaded with the old ID is forever linked to that old ID and if you have apps that were downloaded with the old ID and you want to update them you can only do that with the old ID.  You could delete those apps and downlad them again ( and pay for them if they are not free apps)

  • When I am NOT private browsing Firefox will not allow me to delete or change the website address in the location bar. My only remedy is to open a new window and search in google then click the link to that site through google. How can I resolve this?

    Question
    When I am NOT private browsing Firefox will not allow me to delete or change the website address in the location bar. My only remedy is to open a new window and search in google then click the link to that site through google. When I swap to private browsing firefox allows me to anter the website address directly into the location bar - but this is a slow [prcess to swap back and forth - also by dint of using private browsing I loose my website information.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I attempted to update my iphone5 to 7.1.1  There was an error and now my phone is erased.  I have attempted to restore from the cloud and it propogates the apple id with an old one, and will not allow me to restore from a the cloud

    I attempted to update my iphone5 to 7.1.1  There was an error and now my phone is erased.  I have attempted to restore from the cloud and it propogates the apple id with an old one, and will not allow me to restore from a the cloud

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              
    Also, do you remember what the error message said?

  • I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes...  "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play.  How can I get this message to STOP?

    I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes...  "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play.  How can I get this message to STOP?

    Yes - I connected my phone to my computer / Itunes and went into the apps section, but from there I have no idea how to manage the push notifications.  I even tryied going into itunes that is installed on my phone.  I still cannot find anyplace to manage these popups.  I have also gone into settings - notifiations - and tried turning all notifications for these apps all off but that didnt work either.  Any guidance is MUCH appreciated - Im not sure where to go from here.

  • My MacBook Pro will not allow me to log in at the user screen. It sits frozen and will not prompt me to input my password.

    My MacBook Pro will not allow me to log in at the user screen. It sits frozen and will not prompt me to input my password.

    If the normal restart doesn't work, and you restart on the recovery hard drive, from the choices of things to do window that appears, select Terminal, and in the Terminal window type: resetpassword and then press enter.  You will have a window with the users to choose from to reset the password.  Select the one you want and you will be able to reset the password, double entry of course.

  • Quiz Will Not Allow for Backward Movement

    I have a short 10 page presentation, on page 5 I have a single question.  It is optional, I have it marked for backward movement, it does not show a score afterwards.  When I publish, I can work my way through all pages, however, when I go backwards, I get stuck at the quiz screen, it will not allow me to go back to pages prior to the quiz.  Any suggestions?

    Hi kirkisbetter,
    As per my understanding , you are facing the following 2 issues :
    Issue 1 : You are not able to see the score (Result Slide)at the end
    Issue 2 : Backward movement from the quiz slide.
    We would like to suugest you to follow the steps as mentioned below to resolve the above issues :
    Suggestion for Issue 1:
    Once you delete the result slide from the presentation, then for the result slide to reappear , please go to Quiz -> Manage -> Select the Quiz. The Quiz Settings dialog appears. Make sure the "Show Score at the end of the quiz" option is enabled and then click on OK.
    You can now see the result slide in your presentation.
    Suggestion for Issue 2:
    Once you come to the Quiz slide then you come to the quiz pane in place of the outline pane. In the quiz pane , you can see slides which are presnet after the question slide.
    In order to go backwards from question slide, you need to use the backward button available in the playbar or use the Thumb tab in the right side panel. Once you browse to one slide before the question slide,then you can again see the Outline tab in your right slide pane which lists all the slides available in the presenation.
    We hope this resolves the issue.
    If you are still facing the problem then please do let us know with the exact steps and if possible please share the project file which causes this issue.
    Thanks,
    Subhransu
    Adobe Captivate and Preseneter Team

  • Am signed in to Adobe and trying to edit a form.  Can pull up form but it will not allow me to me to edit the form.  What am I doing wrong?

    Am signed in to Adobe and trying to edit a form.  Can pull up form but it will not allow me to edit the form.  What am I doing wrong?

    To elaborate on what Sukrit posted, it is likely that the form is not an Acrobat forum but a Designer form or was set for distribution and is locked for editing. I suspect it was probably created in Designer and thus can only be completed in Acrobat or Reader since the PDF is really container for and XML structure and does not have the basics of a PDF document. If that is the case, you either need Designer or you can print to a new PDF and use the field recognition feature of Acrobat to recreate the form. Of course, the latter will require some editing to the form fields in most cases.

  • All of a sudden my ical will not allow me to add events through the monthly view mode.

    All of a sudden my ical wil not allow me to add events throught the monthly display mode.  I ahve to go the the daily or the weekly mode.

    Hi John,
    Thanks so much for wading in. I did exactly what you suggested - glad you gave me the hint about how to access my library files. There was only one document that seemed to have anything to do with cache, and that was called Calendar Cache. (I've attached a screen capture of all the files incase I should have deleted something else as well.) I deleted Calendar Cache then restarted iCal, but after updating I was still unable to add new events.
    Is there anything else you can suggest?
    Thanks again,
    Susan

  • Premier Elements 10 - Organiser will not allow me to move files anymore

    I have been using Premier Elements 10 without too many problems but I now have a problem with organiser which is driving me nuts. 
    For some reason organiser will no longer allow me to move files around in the left hand folder window. I move files to the new folder but the video file does not move. 
    Not only that but for some reason organiser has taken two videos from each and every folder and added them to the folder below.  I have tried refreshing, allowing premier to re import the video files, pressing show all etc etc and nothing seems to work. 
    OS is windows vista
    Has amyone else had this problem and more to the point got it sorted.
    Thanks
    David

    Has no one come across this problem?????   Even more frustrating is the fact that now this excuse for editing software will not open any of my projects fully because it has taken it upon itself to mix all my files around and not let me sort them.
    ABOBE THIS PIECE OF SOFTWARE IS UTTER CRAP.  IT IS FULL OF BUGS.

  • Time strech will not allow my to snap transients to the beat

    The Time Stretch feature is wonderful for correcting mistakes in post
    HOWEVER
    Periodically, I run into this issue: there will be certain regions of the audio file which time stretch simply refuses to allow me to snap to the time grid (or anywhere).  If I place a transient within this region and attempt to move it, the transient jumps to far away from the neutral position to a absolute random location.  Most transients can be relocated with continuous adjustment; these do not.
    I use Logic Pro 9 on Mountain Lion
    This is really setting me back because the my drum track is out of time and this bug is literally preventing me from correcting the problem; it only allows me to move the transient to an unintelligible location.

    Loads.. one of them being vpn passthrough having issues due to the TC using IPSEC internally for BTMM.
    You might find this is not possible to fix.. but make sure the TC is not double NAT.
    If you have another router in the network the TC must be in bridge.. but if the TC is the main router and no double NAT you might need to replace it with something less Apple!! Something that tells you by logs and SNMP what is going on.. and keep the TC bridged for TM backups and wireless..
    Sometimes it is easier to surrender.. than fight city hall.

  • Not allowing me to move my files to trash?

    Title pretty much sums it up, whenever I hit the delete the key on a file (even files and folders in my own home directory) It says "Cannot move file to trash.." ANY File.  I go to trash, its empty. Is there some obscure Trash group that I completly missed? Could my Trash permissions some how have gotten screwed up somehow?

    fsckd:
    ls: cannot access /home/eric/.Trash: No such file or directory
    drwx------ 4 eric users 4096 Aug  1 12:00 /home/eric/.local/share/Trash/
    drwx------ 4 eric users 4096 Aug  1 23:58 /home/eric/.local/share/Trash/files
    drwx------ 2 eric users 4096 Aug  1 23:58 /home/eric/.local/share/Trash/info
    I can now move files from home to trash, a reboot seemed to fix it I guess so maybe it was just a random boot glitch. But the fact I don't have a .Trash is rather odd isnt it?
    Also, I've got some files INSIDE trash, that its not letting me delete. If I tell it to delete permanently it errors out with "Failed to delete file from trash' ...not very useful as an error.
    if i try to gksu into nautilus, and then hit the trash bookmark on the side. it gives me an error of:
    The folder contents could not be displayed.
    Sorry, could not display all the contents of "trash": Operation not supported
    Proof, DE is Gnome
    Last edited by FathisAeril (2010-08-02 05:10:54)

  • Quicktime will not allow playback of .mov files (format DVCPRO HD)

    hi
    i'm unable to play .mov files with quicktime application. i am using mac 10.4.11 and have the latest version of quicktime 7.4.5.
    when i click the files the screen shows only white, and sometimes only audio, no images.
    i am unsure if upgrading to quicktime pro would solve this, or if i need to download additional plug ins to support .mov playback.
    i have opened to the movie inspector page and it does not tell me what plug in is needed - it lists the source, format, fps, playing fps (when available), data size, data rate, current time, duration and normal size.
    how do i find which plug in i need?
    thanks for hopefully helping. sara

    I actually found a link to download the missing components that you listed. i installed the package and it now shows under hard drive / library / quicktime but the HD files will still not play in Quicktime.
    could this be because i do not have FCP?
    I do not need to edit with the clips - merely to be able to playback to review.
    thanks sara

  • My iPad will accept downloaded images from my camera, but will not allow me to move the images to a thumb drive, with the message that those devices require too much power for the iPad.

    Using an older, second-issue iPad, I can download images into it from my camera. I cannot move them out of the iPad into a thumb drive. The message I receive is that the thumb drives require too much energy to make the transfer. What can I do?

    Thats how its designed. in order to export your images or videos, the best method might be by connecting the iPad to your computer, or directly to the thumb drive connected to your computer, not to the iPad. Then is as simple as drag and drop. The other method could be sending them by email or uploading via a cloud service but that will take more time do get it done.
    Hope this helps.
    Alex

  • Aperture 2.1.2 crashing constantly, will not allow me to move library/ create vaults

    Hi, I've searched for threads on this, but nothing came up with my particular situation. First, I'll state my specs
    iMac 24" (aluminum)
    3.06GHz Core2 Duo
    4GB RAM
    500GB HDD
    So, after much procrastinating, I decided this weekend that I would organize my photos better, and move my growing Aperture library off my internal drive in hopes of speeding up my recently lagging computer. I migrated from iPhoto to Aperture back in August of 2008 and have always been meaning to make a vault of all my old work and just store that offsite somewhere so I don't have to worry about the disk space or losing the files. But I never got around to it.
    So now my Aperture library is 35,000 photos large, and weighs in at 302GB.
    The first thing I tried to do (before I even knew Aperture was going to start crashing) was to move the Aperture Library file from its default location in the users/pictures folder to one of my external 1.5TB drives. However, the transfer would fail around 6GB in and say "some files could not be read or written." I tried several times to no avail.
    Giving up that route, I read around online and decided that I could just make a vault of my entire library on the external drive, then create a new library there, and restore from the vault.
    So I open Aperture to try and make a vault. It "unexpectedly quits" right when the interface loads. I tried again and got as far as naming the new vault, then it crashed again. Now it crashes even if I am trying to just view my images. I went on a short roadtrip with friends and got back last night, and it crashed halfway through the import of 400 images, but finished importing when I reopened it. I don't know if that's what started off the whole thing.
    Anyway, I noticed that I only had 4(!)GB of space left on my internal drive, so I did some quick cleaning and rearranging to external drives and freed up about 45GB of space. I figured that would give the app plenty of room to breathe.
    Nope. Still crashes.
    Rebooted several times, no help.
    Reset PRAM several times, nada.
    I am in real trouble here. I'm a photography student with three studio classes this quarter and I can't have this happening. I paid top dollar for this machine less than six months ago and now it's puttering along like it's 2 or 3 years old. When Aperture is open (when it would still work) the rest of the computer would just slow to a crawl. I have 4GB of RAM, why doesn't Aperture use more? I was reading that it would only use 1 or 2GB max. Why?
    But that part is not important.
    I need to get this fixed, so ANY help is GREATLY appreciated! I have the crash report saved from the last crash, so if anyone wants to see any part of it, let me know. It told me which thread caused the crash but it looked like generic usage stuff, nothing special (I was just trying to look at my trip photos).
    Thanks in advance,
    Screaming in Savannah
    (Chris)

    This is awkward. Right... I have used Aperture since it came out.
    In fact, after all these failures, you should try the rebuilding your library first.
    Hold down Option and Command when launching Aperture, though you couldn't back up your files... which was recommended by Apple before you rebuild it.
    It should correct and repair any broken links or permissions. See if it works.
    After, you can simply COPY and not MOVE the library to the external HD. Do you use Firewire? It's much better and reliable. After the library is copied, point Aperture to use the external HD in preference. Close and reopen, it should open the library from the external HD.
    The better bet is to make sure you are using an external HD with Firewire 800. I have some experience with USB2 drives when Aperture crashes a lot. It may seem some kind of bandwidth problem which I couldn't understand. It seems find with small jpg files but if you start importing RAW or do something with the RAW files, USB drives always fail.
    I have moved my library to an external drive since Aperture 2 as my library has grown beyond the internal capacity. My standard practice is now, after working the files, export them in TIFF or JPG, export the 'Project' with the RAW files to DVDs, remove from the library and re-import the JPGs back to keep the library size. Also I keep two faults in separate locations.
    I hope it works.
    J

Maybe you are looking for