Mail will not stay as default email reader

I have the mysterious problem facing a computer newly installed MacBook Air 2012 with 10.8.2. It has Parallels, MS Office 2011, but no MS Mail Application.
I have another account on this computer that is not affected by this issue.
The issue is that the default email reader is set to "Narrator".  When I change it to Mail 6.2, the setting takes until I close Mail. When I reopen Mail, Narrator shows again as the default reader.  When I click on a mail link in Safari, Mail opens.
There is no evident preference or preference pane file for Mail in the Library.  I was looking to compare the preference file with one of a computer I setup in parallel.
How do I find the preference plist file for Mail? 
I setup all my accounts through "Mail, Contacts, and Calendar" so I think Apple is storing this configuration information elsewhere.

Never mind. It went away aftrer reboot.
Still don't know where the plist is for Mail though.

Similar Messages

  • Failure sending mail: the specified string is not in the form required for an e-mail address.mail will not be resent. Email Notification Component Properties works fine.

    I know there are a few other questions like this but I can't seem to find how it's relating to my issue.  I am getting the familar failure sending mail: the specified string is not in the form required for an e-mail address.mail will not be resent.
    in the reports feature of sccm. 
    I just picked a sample report Compliance 4.  I right clicked hit create subscription and input my email into the TO: field.  When it runs i get the above error.  I checked the email notifcation under configure site components and was able
    to successfully send a test message from there but I dont get why it doesnt work on the subscription.  
    Any Ideas?

    The log is pretty big so im not sure where I can upload it.  I think it would be too big to paste here but I have copied what I think you are looking for in the log and will paste it here.  Let me know some place I can send you the full log file
    or if you want a different log.
    schedule!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Handling Event TimedSubscription with data 2946db38-5a07-4fb1-ad06-d7714e25b1ba.
    library!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Schedule 534ad96b-a680-4630-a865-9f99e1087e3f executed at 12/07/2014 00:02:03.
    schedule!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Creating Time based subscription notification for subscription: 2946db38-5a07-4fb1-ad06-d7714e25b1ba
    library!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Schedule 534ad96b-a680-4630-a865-9f99e1087e3f execution completed at 12/07/2014 00:02:03.
    library!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Initializing EnableExecutionLogging to 'True'  as specified in Server system properties.
    notification!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Handling subscription 2946db38-5a07-4fb1-ad06-d7714e25b1ba to report Compliance 4 - Updates by vendor month year, owner: LEGISLATURE\mrykhoe, delivery extension: Report Server Email.
    emailextension!WindowsService_37!a04!12/07/2014-00:02:06:: e ERROR: Error sending email. Exception: System.FormatException: The specified string is not in the form required for an e-mail address.
       at System.Net.Mime.MailBnfHelper.ReadMailAddress(String data, Int32& offset, String& displayName)
       at System.Net.Mail.MailAddress.ParseValue(String address)
       at System.Net.Mail.MailAddress..ctor(String address, String displayName, Encoding displayNameEncoding)
       at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.CreateMessage(Notification notification)
       at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification)
    notification!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Notification f06f40a4-32f3-4fa6-8077-89083cc7a2a2 completed.  Success: True, Status: Failure sending mail: The specified string is not in the form required for an e-mail address.Mail will
    not be resent., DeliveryExtension: Report Server Email, Report: Compliance 4 - Updates by vendor month year, Attempt 0

  • My mail will not stay in order no matter what I do Miss a lot and some totally disappear?

    I try clicking show by date works for a while then stops I look at mail then go to print later and many times it disappeared Search everywhere gone
    I am missing a lot of important emails
    Also can not save my contacts to my list Keeps saying I only have 2 )the most recent)

    We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
    Have you created a new account or updated your existing account ? All content that you download from the store is tied to the account that downloaded it, so if you have created a new account then all of your existing downloads will remain tied to your old account.
    If you've updated your existing account then try tapping on the id at the bottom of the Featured tab in the App Store app and log out of it and then log back in with the updated id so as to 'refresh' the account on it.

  • Mail will not send from designated email account

    I have several emails set up in Mail. Everything has been working great until a couple days ago. I haven't changed anything, made any updates, or added any new accounts.
    Let's call the two accounts A and B. My main account is A. When I am sending an email, A is my default. It is designated as such. When I send an email from account A, I double check in each email. It shows it is coming from that default account. However, my recipient is receiving the email from account B. I only know this because when they reply, their response shows up in account B's inbox. The weird thing? My sent email folder shows as being sent from the correct account-- account A.
    I have re-installed the accounts, double-checked everything.  The problem still exists.
    This is the weirdest issue. Anyone know what could be causing this?
    Thanks so much for the help.

    Probably because it is using the server of account B to send from. When it goes through B's server, the server changes the sent address to that of B's email address. Either you have the wrong outgoing server set up for account A or there is a problem with it and it's switching to account B's server.
    Open account preferences and highlight account A. Look at the SMTP server list and see which it shows. Select the correct one and check the box to use only that server for that account. If it fails in the future, you will get an alert that it failed and the option to choose another outgoing server.
    Make sure all information for that server is correct and that it has the correct user name and password. Once you get that working, do the same for account B and make sure it has the correct outgoing server and check the box for that one also.

  • Gmail mail will not print using default printer.

    When I click on "print" to print out an email, I must reset the printer to be used each time as Gmail is not recognizing the printer that is set as my default printer.

    Firefox doesn't use the System default printer as its default printer. In Firefox the "last used" printer is used as the "default printer".
    If you're on a network, Firefox may not remember the last used as the default all the time. Laserjet printers that have gone to "sleep" or into energy-saving mode seem to be problematic as being remembered as the "last used", even in non-network situations, when you have multiple printers connected.

  • Previous Recipients in Mail will not stay deleted

    Email addresses that I have used previously (but don't want) keep autofilling in Mail's TO: field.
    I have gone to Window>Previous Recipients and deleted these emails but they autofill again the next time I am on my computer.
    How can I permanently delete these pesky Previous Recipients?

    raelibark wrote:
    Thank you so much for your response. I do want to know what the long term effect of this action will be.
    there won't be any. you'll just have to start accumulating "previous recipients" from scratch.
    Will I still have the autofill feature in Mail?
    yes.
    Will the "good" Previous Recipients repopulate after I have emailed them?
    yes.

  • Mail will not send via Dreamhost Email Server Thro...

    Hi,
    I have a Nokia E72 and I'm using the built in Messaging service (http://email.nokia.com) to retrieve email via IMAP from a Dreamhost-hosted email account. Receiving works perfectly, and I'm very happy with the service.
    Whenever I try to send email, the mail is 'sent' on my phone, but I get a delivery status notification (failure) email.
    It contains the following error:
    500: Failure - sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderE​xception: unable to find valid certification path to requested target
    Now, I know that Dreamhost has some funky SSL issues with their ingoing and outgoing mail servers. I'm not sure why incoming mail works fine, but outgoing is having these certificate issues.
    When I go to my messaging settings (https://email.nokia.com/account/changeAdvancedIspS​ettingsUI.action), any changes I make to the outgoing settings result in an error message, and being unable to save the changes.
    Can anyone help me out with either changing my settings, or getting Nokia Messaging working with Dreamhost?
    Thanks!
    Matt

    Hmm, strange. Although I tried this before, the website now does accept my smtp:
    server: mail.yourdomain.com
    port: 25
    NO SSL.
    By using NO SSL and port 25, you bypass the invalid certificate I guess. Dreamhost has an certivicate in place identifying with *.mail.dreamhost.com. I asume this is causing some issues over at Nokia.
    People who say it cannot be done should not interrupt those who are doing it.

  • My mail will not let me send emails but will let me receive.. Any ideas how to fix this?

    Please help, tried everything to fix this

    This is an Ongoing problem with the built in Mac Mail program. Almost everyday there is at least one post, if not 10 posts, about the same thing on these forums.
    Most Mac Fan Boys will respond with "It must be your ISP has changed settings". But every other device you have, Phone, Pad, other computers, whether Mac or PC, have NO problems getting and sending mail with those exact same settings as used in Mac Mail and that Mac Mail worked a few hours ago or yesterday and now it doesn't.
    I suggest you switch to some other Mail program, Any other Mail program, and this type of problem will never happen again.

  • Mail will not stay turned off

    Mail after I quit the application, will self start. I can not stop the app from turning it self on. Can anyone help

    "Repair Disk Permissions" from Disk Utility may help.
    Mihalis.
    Dual G5 @ 2GHz   Mac OS X (10.4.6)  

  • How come my mail will not get my new emails?

    i can not recieve or send any emails. when i open my mail nothing happens. it says i have not gotten any emails for days and i no i have. please advise.

    i have been getting emails since i got my computer 2 years ago but this week my mail wont open. i dont know whats wrong

  • I have just upgraded to Maverick and my mail will not stay open

    I upgraded my macbook pro to Maverick and had no problems.  I just upgraded the Mac mini, and when I open the mail, it comes up for a second or two and then closes.  Can someone help me to resolve this problem.

    I just got off the phone with Apple support.  They had me open Terminal and key in  
    defaults delete com.apple.mail
    My mail is now working.

  • Mail will not stay deleted

    I delete mail from my g mail & yahoo accounts & it returns in the all mail section. Have deleted it out of the I Mac but still returns.

    If I remember you need to check your mail prefs to make sure that you're deleting the message from the server.

  • Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

    Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

    If you think you're insane now, try maintaining those pop up menus.
    As far as I know, these menus have not been updated since FW 8, so 
    they are at least two versions old.
    Save yourself a lot of grief by avoiding those menus. There are many 
    other products on the market which do a much better job of creating 
    and maintaining this type of navigation structure.
    Read this link before you climb any higher on this slippery slope:
    http://apptools.com/rants/jsmenu.php
    There was another blog post by the fellow who originally wrote the pop 
    up menu feature, but I can't seem to locate it. Even he says stay away 
    from them.
    Not the answer you probably want, but I hope it helps, nonetheless.
    Jim Babbage

  • Mail default email reader changes constantly

    i have a weird issue where the Preferences > General > Default Email Reader keeps getting reset to some Windows program (i run Parallels and windows 7 on the laptop). i /think/ it keeps getting set to a windows program but in any case it is never Mac Mail which is sort of inconvenient.
    has anyone heard of such a thing or know how to get this to stay on Mail?
    TIA

    thanks for the always great help. this is a good suggestion.
    for some reason though when i get into virtual machine > configure > applications the pulldown for Email is "Open in Mac". i will try and see if there is some help on the parallels forum on this.
    i guess i am correct in thinking that the only mail setting in mac OS is in Mail? i mean, now that i think about it i have Thunderbird loaded and Sparrow loaded. i don't suppose that somehow something in these email clients is causing mac to get confused...
    just thinking out loud on this one i guess...

  • Keep getting deleted emails back and mail will not close,have to force quit

    i have 4 emails that will not stay deleted.I will delete them and as soon as i reopen my mail they come back.Its as if they never left.Then i can't close my mail.i have to force quit. I have read of other problems close to mine and tried there solutions with no success.I do not know if my setting in pref. are correct or not. This problem is not allowing me to recieve new emails i just keep getttting these same 4 back time after time. very frustrating.

    You're welcome.
    Verify/repair the startup disk (not just permissions), as described here:
    The Repair functions of Disk Utility: what's it all about?
    In order to fix the problem, we'll have to re-create Envelope Index. The thing is, Mail may choke on those messages while re-creating the index, so either be prepared for that or perform optional steps 1 and 3:
    1. (Optional, but recommended). Assuming this is a POP account, in the Finder go to ~/Library/Mail/POP-username@mailserver/INBOX.mbox/Messages/, and identify the *.emlx files associated with the troublesome messages. Viewing the *.emlx files as List in the Finder showing the creation/modification date may help. Just identify them; do not get rid of them yet (you must quit Mail first).
    2. Quit Mail.
    3. (Optional, but recommended). Move to the Trash the troublesome *.emlx files found in step 1.
    4. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong -- e.g. by dragging it to the Desktop while holding the Option (Alt) key down.
    5. Locate Envelope Index and move it to the Trash. If you see an Envelope Index-journal file there, delete it as well.
    6. In the Finder, go to ~/Library/Mail/POP-username@mailserver/. Locate Deleted Messages.mbox, and move it to the Trash. I assume there is nothing to be preserved there.
    7. Open Mail. It will tell you that your mail needs to be "imported". Click Continue and Mail will proceed to re-create Envelope Index -- Mail says it's "importing", but it just re-creates the index if the mailboxes are already in Mail 2.x format.
    Note: For those not familiarized with the ~/ notation, it refers to the user's home folder, i.e. ~/Library is the Library folder within the user's home folder.

Maybe you are looking for

  • Publish the content selectors

    Hi I am Surya ,I am working in bea weblogic portal 8.1 I want to publish the content selectors which is created in the Portal Admin How should i display the html file which i have uploaded? When i access my home page ,i could not see the html File wh

  • A problem about system monitoring/administration of solution manager

    Dear experts:   When I use solution manager system to monitor other systems, a strange phenomenon appears,that is I canu2019t open the detail log .anyone who can tell me why I can't open the alert?  thanks

  • Need some code help please

    I am trying to make a sun and planet with the planet orbiting the sun. It is all working but the complier is having a problem with the instance variable _ball in the programs.  Can anyone help me fix this, I think I'm almost there. public class Movin

  • Freight costs to be payable to third party  in a PO

    Good morning, In order for freight costs to be payable to third party in a PO (Incoterms of Ex-Works) I believe you need maintain a separate vendor for this condition type, at the time of creation of the PO. How do you link a condition type to a vend

  • Error retrieving cache in c# WPF project (No problems in c# WinForms)

    Hi! To put it simply, the same basic cache retrival (with same configuration files) works under c# Winform app but under c# WPF app returns an error: {"unable to convert type -6 to a Binary type"} from cache.GetValues(null); Working with a custom .ne