Mail with Exchange crashing after installing 10.5.2

Just installed 10.5.2. My work e-mail is through Exchange - Mail downloads new messages and syncs with the server, but every time I try to view a message it crashes. I can't view any message, whether it's html-formatted or just simple text. Anyone else having this problem?

I am also experiencing this issue, but not with exchange. I connect to several mail servers, most of them using Postfix. One is even my .mac account, though I'm not sure what server package they use for that. Same symptoms.
For me, it happens on all accounts, removing and re-adding accounts does nothing for this. Adding new accounts that had not been there previously also fails to resolve the issue.
Console shows the following:
2/13/08 4:02:17 PM Mail[952] * Assertion failure in -[LibraryToDo setMailboxUid:], /SourceCache/Message/Message-919.2/Library.subproj/LibraryToDo.m:211
2/13/08 4:02:17 PM Mail[952] trying to set a non-ToDo MailboxUid for a ToDo. The MailboxUid for a ToDo must be a ToDosMailboxUid
2/13/08 4:02:17 PM Mail[952] * Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'trying to set a non-ToDo MailboxUid for a ToDo. The MailboxUid for a ToDo must be a ToDosMailboxUid'
Message was edited by: jwhelan

Similar Messages

  • Mail crashes after install of Maverick

    I cannot get my mail program to open after install of Maverick.  I ran disk utility / disk permission repair.  Nothing.  Tried the open contacts workaround mentioned in the forum, nothing.  Any ideas?

    If the solutions above did not work:
    Shut down Mail.
    In Finder, go to "~/Library/Mail/V2/MailData/" (just do CMD+Shift+G and paste the path).
    Move all "Envelope" files to your desktop.
    Restart Mail and let it convert/reindex your mailboxes.
    If this worked, Trash the Envelope files file that are on your desktop.
    You can try restoring mail from a Time Machine backup.
    Hold down the Option key and in the Finder Go > Library
    Enter Time Machine.
    Select a date before the Mavericks upgrade.
    Restore Mail.

  • My iPhoto keeps crashing after installing the latest update, can't do anything!

    My iPhoto keeps crashing after installing the latest update, can't do anything! It used to crash when importing but now I'm at the point where I open the software and after 2 seconds it crashes (nothing connected either). What to do? Can't access any photos

    Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists. If you can create a new library and import some test photos then the problem lies with your original library. 
    If that's the case make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    If iPhoto crashes while trying to create a new library then try this:
    Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    If that fails to help a reinstall of iPhoto is indicated. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/  folder,
    Click to view full size
    Then install iPhoto from the disk it came on originally and apply all relavant updaters.
    P.S.  If you're still running Tiger, 10.4.6, then the above may not apply.  If you're running a newer system you should update your profile so we have a better idea of where you're at.
    OT

  • Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac?

    Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac? 

    Peggy
    You are probably correct. I tried all different variations to test it. As long as I quit each document separately, i.e., red dot it, I seem to bring up only one document after that whether I click on the document itself or open it within pages. The same is true with numbers.
    Two more questions:
    1) can you turn off the "resume" feature? If so, how? I could not find a way to do it.
    2) why the "save a version" feature in pages? What happened to the old "save" and "save as" features?
    Thanks so much, you saved me a lot of frustration but I am still going to install MS Office for Mac.
    Daveben

  • Windows Server 2012 C Drive gets always full with exchange server 2013 installed

    Hi All
    My C drive gets full always with exchange server 2013 installed what would be the reason because this is causing extremely bad to my environment can somebody help me please
    Thanks & Regards, Santosh Chowdary Vasireddy System Administrator Prolifcs DHFLVC Silicon Towers, 5th Floor, Survey #14, Kondapur, Hyderabad – 500 032. Work +91 40 3999 1999 Ex.1656 l Cell +91 9849277255 l [email protected] A Global
    Provider of IBM, Microsoft and Testing Solutions Award Winner for Technical Excellence, BPM, SOA, Portal and Governance

    Hi,
    Based on your description, I understand that this issue (C drive gets always full) occurred after Exchange
    Server 2013 installed.
    à
    But my exchange server is installed in different Drive (EX: D)
    I suggest that you should check file system to see what folders or files are taking up the space recently.
    This issue may be not related to Exchange server.
    Please refer to the following article and enable Disk Cleanup Utility. Then monitor the result.
    Enabling
    Disk Cleanup Utility in Windows Server 2012
    Meanwhile, please check if the winsxs directory is growing bigger.
    How
    to Reduce the Size of the Winsxs directory and Free Up Disk Space on Windows Server 2012 Using Features on Demand
    By the way, please check if you have installed update rollup 2836988. I noticed that Windows.edb file grows
    very large. For more details, please refer to the following KB.
    The Windows.edb file grows very large in Windows 8 or Windows
    Server 2012
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • My macbook pro crashed after installing maverick. I lost all my photos however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?

    My macbook pro crashed after installing maverick. I lost all my photos however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?

    We'll need to know more to beable to help. Do you want to try to restore your photos from your iPhone to your Mac, or try to recover the photos from the old iPhoto Library on your Mac?
    What is the situation of your Mac now? In hat way did it crash? A hardware problem with the drive? Does the system not start properly? Does iPhoto not launch? Do you still have the iPhoto Library on your mac or a backup, so we could try to rescue the photos there?
    What versions of iPhoto are on your iPhone and your Mac?
    however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?
    On the iPhone you cannot access the "package contents" - IOS hides the file system from the users. To restore photos from your phone share all iPhoto photos to your Camera Roll, that are not already in the Camera Roll,  and then connect the iPhone via USB and import the Camera Roll to iPhoto or Image Capture. Or use any of the other sharing methods described on thos manual page: see:  Ways to share photos http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnk7d8f763e
    To retrieve photos from a corruptrd iPhoto Library on your Mac we need to know the version number and more about the "crash" you experienced, the state of your mac, the system, the data. Please post back with more details.
    -- Léonie

  • Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

    Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

    The latest flash player release is 11,0,1,152.
    Can you upgrade to this version and see whether the crash stil exists?
    Go to get.adobe.com/flashplayer to download and install flash player.
    In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
    saranlee wrote:
    My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows  which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

  • Can't set up Mail with Exchange

    Searching has shown that there seem to be a lot of problems with Exchange and Mail, but I wanted to check and see if there's anything else I can do to fix this. My Exchange server works fine with the iPhone and with Entourage, but with Mail it will never sync. I don't want Exchange calendar and contacts, just e-mail. I'm not sure if I'm setting it up wrong - there doesn't seem to be a place to put the domain name? Could that be a problem, or is this just a hopeless quest? I have heard that Snow Leopard should support Exchange, so maybe I will just wait it out. I'm just trying to get switched away from Entourage altogether and I don't like having to use two different e-mail programs. It just seems odd that it works so easily and well on the iPhone but not on a Mac.

    Same problem here. I've used Mail with Exchange for quite sometime but recently I can't send using the SMTP server. I can receive and even send to other email addresses on my Exchange network. But not to the outside world. Tried every configuration and authentication possible. Now I read (here in the discussions) that Mail 3.x (I'm using 3.6) is very unreliable with Exchange. I think we are desperately awaiting Snow Leopard. I will certainly not install Entourage on my Mac again that's for sure. I'm resorting to web access for my Exchange folders now.
    Anyone have any solution to this?

  • HP Pavilian m7050y & Monitor HP vs 19c keeps crashing after installing windows 7

    Hi Forum Experts, hope all is well.  Hopefully someone will be able to help me with this problem.  
    My HP Pavilian m7050y & Monitor HP vs 19c keeps crashing after installing windows 7.   
    I knew there was a problem when I first installed windows, because the windows logo was not centered on the monitor after intial startups.  I did adjust it a little by pressing auto/select on my monitor, and that helped with the centering a bit but it is not perfectly centered. 
    The screen goes blue and this is the message I get when it crashes and restarts.
        Problem has been detected and windows has been shut down to prevent damage
    to your computer.
    attempt to reset the display driver and recover from timeout failed.
    if this is the first time you've seen this stop error screen,
    restart your computer, if this screen appears again, follow
    these steps:
    Check to make sure any new hardware or software is properly installed.
    If this is a new installation, ask your hardware or software manufacturer
    for any windows updates you might need.
    If problems continue, disable or remove any newly installed hardware
    or software.  Disable BIOS memory options such as caching or shadowing.
    If you need to use safe mode to remove or disable components, restart
    your computer, press F8 to select Advanced Startup Options, and then
    select safe mode.
    Technical Information
    *** STOP: OX00000116 (0X85E75330, 0X9303C5BC, OX00000000, 0X00000002)
    *** atikmdag.sys - Address 9303C5BC base at 9302C000, DateStamp 49f1996c
    Collecting data for crash dump ...
    Initializing disk for crash dump ...
    Beginning dump of physical memory.
    Dumping physical memory to disk: 
    the message is also slightly of to the left it really reads like this.
    Problem has been detected and windows has been shut down to prevent damage
    o your computer.
    ttempt to reset the display driver and recover from timeout failed.
    f this is the first time you've seen this stop error screen,
    estart your computer, if this screen appears again, follow
    hese steps:
    heck to make sure any new hardware or software is properly installed.
    f this is a new installation, ask your hardware or software manufacturer
    or any windows updates you might need.
    f problems continue, disable or remove any newly installed hardware
    r software.  Disable BIOS memory options such as caching or shadowing.
    f you need to use safe mode to remove or disable components, restart
    our computer, press F8 to select Advanced Startup Options, and then
    elect safe mode.
    echnical Information
    ** STOP: OX00000116 (0X85E75330, 0X9303C5BC, OX00000000, 0X00000002)
    ** atikmdag.sys - Address 9303C5BC base at 9302C000, DateStamp 49f1996c
    ollecting data for crash dump ...
    nitializing disk for crash dump ...
    eginning dump of physical memory.
    umping physical memory to disk: 
    Once windows is fully rebooted all pages, and the display look ok, until it crashes again.   I searched for updated drivers on the HP and Windows site but could not find any.  The one that is currently installed is called (Generic Pnp Monitor).
    Thanks in advance for your expert advice.
    Juan.

    Thank you for the additional information.
    Did you run the Win 7 Upgrade Advisor to assure that your computer is compatible?  There may be a problem with compatibility.  Also, which version of Win 7 are you running; 32-bit or 64-bit?
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • If you have problems with Apple Apps after installing Mavericks

    I had a problem with Apple Apps after installing Mavericks. They would bounce in the dock but never open.  The problem apps I had trouble with were CALENDAR, MAIL, and even APP STORE.   I am guessing it has to do with permissions when setting up via iCloud.  Here's what I did to make my apps work again after the update:
    Restart computer, then immediately hold down OPTION so you can start from the 10.9 RECOVERY DISK.
    Run DISK UTILITY, then run REPAIR DISK, then run REPAIR DISK PERMISIONS.
    After this, RESTART, then hold COMMAND OPTION P R at the same time until your computer restarts three times.
    After it boots up, the apps began working like they should have.

    That's where your questions about Lion should be posted.

  • Problems to sync my computer calendar with my Iphone after installing latest Itunes download

    problems to sync my computer calendar with my Iphone after installing latest Itunes download

    When I connect my Iphone to the computer Ai have to sync automatically my outlook calendar. Never had any issues except with the latest download that tell is doing some sync over the air with ICloud and that I can go to my Iphone and change that. So far I have not been able to sync my Iphone calendar with my outlook calendar for tge whole week

  • Anyone else having trouble with FCPX crashing after the OSX update?

    Anyone else having trouble with FCPX crashing after the OSX update? It NEVER crashed until the update. The night before last it crashed 20 times in 45 minutes. I can't finish my project because of it.
    Retina, Mid 2012
    Processor  2.3 GHz Intel Core i7
    Memory  8 GB 1600 MHz DDR3
    Graphics  NVIDIA GeForce GT 650M 1024 MB
    Software  OS X 10.9 (13A603)

    therealamaru wrote:
    I don't understand the question. I am simply editing.
    There are some patterns of crashes that suggest possible causes and fixes; some users report crashes when FCPX is in the process of loading; others while importing/exporting, etc. Asking to narrow the list of possibilities.
    Suggest starting with three things:
    1) Update the software from the APp Store  if need be.
    2) Trash preferences.
    3) Repair permissions.
    Russ

  • Entourage crash after installing update 10.6.4

    Entourage 2008 keeps crashing after installing 10.6.4. The problem seems to be the database. I have tried rebuilding the database, I have copied it, I have moved it: nothing works. Please advise!

    It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
    1) Use the AirPort menu bar item to turn AirPort off, then on again.
    2) Try to select your Wi-Fi network from the AirPort menu.
    3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
    4) In the same panel as (3), define a new location and see if you can make that work.
    5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
    6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
    These steps may not help, but they'll only take a couple of minutes to try.  Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them.  If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.

  • Windows 7 home taskbar crashes after installing adobe reader

    windows 7 home version, taskbar crashes after installing adobe reader

    The link to the Reader forum is at the top of this forum.

  • Can't send mail in IMAP accounts after installing Mavericks. Incoming messages OK.

    I'm unable to send mail in IMAP accounts after installing Mavericks.  Incoming is OK. Any suggestions on how to resolve, please?

    I'm afraid that I have the very same problem. How did Apple not see this. Surly email is a major part of any opperating system and should have being more than double checked before releasing. I understand software glitches but this is a major pain in the backside. I'm totally stuck and can't use my macbook pro

Maybe you are looking for

  • How do you adjust the duration of audio loop?

    How do you adjust the duration of the audio loop that you can setup to play in the main menu?

  • "C" key CD start won't work............

    I tried starting from a CD several times using the "C" key at restart - but it just won't work! Any ideas as to why? Thanks

  • Getting calling class name

    Hi, I have a project where it is imperative that i know the calling class and the called class name. I have a solution working where i place the caled class on a stack and record it as a possible calling class. However there must be a simpler means o

  • Order not delivered

    I subscribed for 400 min/ month 2 days ago which was about to finish. Then today I made another subscription of the same 400 min but it's not delivered this time.. My order no. is [removed for privacy]

  • Dropped iPod. Can't restore. Help!!

    Basically I dropped my iPod 2 days ago. It was only about a 6 inch drop and it turned on okay and I changed track but then it froze and I had to turn it off. Now when I switch it on it gives me an unhappy iPod symbol and the website for tech support.