Mail wont connect to my webmail server

my phone wont connect to webmail server, just sits at the inbox screen and says connecting at the bottom.

What email provider are you using? Have you ever been able to connect or recieve emails on your iPhone?
Try the suggestions in this Apple doc -> iOS: Unable to send or receive email

Similar Messages

  • I downloaded ios7 after being asked to restore. But now my phone wont connect to the activation server and is asking to restore again but I cant because itunes does not show any of my phone information

    I downloaded ios7 after being asked to restore. But now my phone wont connect to the activation server and is asking to restore again but I cant because itunes does not show any of my phone information (it just shows a blank white screen with "iphone" in the centre".

    I imagine a ton of people are attempting to activate after the update, and the server is getting overloaded. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.

  • Dreamweaver (on Windows 7) wont connect to IIS (v7) Server using "FTP over SSL/TLS..."

    I am evauating wether to purchase Dreamweaver CS6...
    Dreamweaver CS6 trial (on Windows 7) wont connect to IIS (v7) Server using "FTP over SSL/TLS (explicit encryption)".  I have a NEW Godaddy SSL certificate installed on the IIS server. 
    On connecting Dreamweaver states: "Server Certificate has expired or contains invalid data"
    I have tried:
    -ALL the Dreamweaver Server setup options
    -Using multiple certificates (tried 2048 bit and 4096 bit Godaddy SSL certificates)
    -Made sure the certificate 'issued to' domain name matches my domain name.
    I am able to connect no problem using Filezilla, with equivalent Filezilla setting "Require explicit FTP over TLS".  I can also connect fine using Microsoft Expression web. 

    Thanks for your prompt reply.
    My comments:
    1) You should update your tread (forums.adobe.com/thread/889530) to reflect that it still occurs on CS6 (I had already read it but figured it was an old tread and thus should be fixed by now). 
    2) You said “These warnings will also pop up for your users if you have a store saying the SSL certificate does not match the domain/ip and this can make users checking out in a storefront very nervous” .  This does not seem to be correct – my https pages display properly using the same Godaddy certificate … using IE:
    3) Godaddy is not my host (I use Amazon AWS) – but the SSL certificate is from them.

  • TS1702 cannot send Mail   The connection to the outgoing server failed.  Additional Outgoing Mail Servers can be configured in Settings Mail, COntacts, Calendars

    Cannot send outgoing messages from my IPhone.  Receive the following message: 
                   Cannot Send Mail
                   The connection to the outgoing server"[email protected]" failed.  Additional OUtgoign Mail Servers can be configured in Settings> Mail, Contacts,                Calendar

    See here for troubleshooting the SMTP settings (outgoing mail server on your carrier's servers)
    http://www.apple.com/uk/support/iphone/mail/
    Often removing a mail service from iPhone and resetting works

  • IPhone message. "Cannot Send Mail"  "The connection to the outgoing server.

    It states:
    "Cannot Send Mail" "The connection to the outgoing server "(null)" failed."
    This is the error I get attempting to send Yahoo mail using EDGE network on at&t.
    I would guess that only 2-3 emails out of every 10 go through. The rest get the above error message.
    Please help if you can.
    Thanks

    Well, if your on ATT Yahoo. The settings are as follows, and I've had luck both sending and recieving with these settings.
    Incoming Mail Server
    Host Name: pop.att.yahoo.com
    User Name: *****@sbcglobal.net (or whatever your ATT domain might be)
    Password: Required
    Outgoing Mail Server
    Host Name: smtp.att.yahoo.com
    User Name: ****@sbcglobal.net (or whatever your domain happens to be)
    Password: Optional (I left mine blank)
    Under Advanced
    Deleted Messages: Remove After ? (Your Choice)
    Incoming Settings
    Use SSL : On
    Authentication: Password
    Delete from Server: Your choice
    Server Port: 995
    Outgoing Settings
    Use SSL: On
    Authentication: Password
    Server Port: 465
    I've taken these setting from my phone. I can't remember all the domain names for the ATT Yahoo, but I know sbcglobal is one, and I believe attglobal is another. Also to change the ports under advanced, though you shouldn't have to, simply click the port area and a keypad will come up below. You can type the port number there.

  • TS1398 My iPad cannot  send mail - the connection to the outgoing server failed

    My iPad cannot send mail - the connection to the outgoing server failed.

    Go to the email settings, and re-enter your Outgoing Server username and password.
    Have you changed that recently, perhaps on the Incoming Server but not on the Outgoing server?

  • My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

    My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

    That's usually a symptom of a phone that was hacked or jailbroken to unlock it.

  • TS3694 my itunes wont connect with the apple server

    my itunes wont connect to apple servers, since i got new windows 7 pc, i keep getting an error message half way through A SYNC OR EVEN WITH NONE OF MY DEVICES ATTACHED, it wont connect, error says to check my connection and try again, but my conection is fine!!???
    ive tryed uninstalling it and reinstalling itunes, but same problem, at my wits end, plz help!!!!

    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than Network connectivity tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • Corrupted attachments in Mail.app connecting to an IMAP server

    Hi,
    I'm using Mail.app to connect to our local IMAP server (over SSL). For a long while, I've had problems with large attachments being corrupted when I open a message in Mail. If I view the same message in our webmail client (which also talks to the IMAP server), the attachments are uncorrupted.
    If I save a message as source and decode using a mime64 decoding tool, the attachments are corrupted in the same way as from within mail. This is most clearly visible when the attachment is a large jpeg.
    If I remove the locally cached messages by deleting the /Library/Mail/IMAP-xxxxx folder, then re-download all the messages, the attachments will be often corrupted in a different position in the image.
    Using another IMAP mail client (Thunderbird) on the same machine to connect to the same IMAP server shows no corruption in the same messages which are corrupted in Mail.app.
    I can't say whether this problem was introduced with Tiger, but it has persisted for a long time. This problem is only for INCOMING attachments; I have had no problems with corruption in the attachments I send to others.
    Other Tiger Mail.app users in the building have the same issue. Any suggestions to identify and fix this problem will be greatly appreciated. It's possible it's bug in Mail, and I would be happy to contribute any information or perform any testing required to fix it.
    Using:
    Mail.app v2.1 (752/752.2)
    Thunderbird v1.5.0.7 (20060909)
    Mac OS X 10.4.8 Build 8L127
    1 Ghz Powerbook G4 with 1.25 GB RAM
    Best regards,
    Dylan
    Powerbook G4 Mac OS X (10.4.8)
    Powerbook G4   Mac OS X (10.4.8)  

    The right way of doing that would be rebuilding the
    mailbox, i.e. select it and do Mailbox >
    Rebuild. Does that make a difference?
    Rebuilding the mailbox — no difference. The attachments are corrupted at a different position in the image, but still corrupted.
    Another thing to try would be trashing the Mail
    cache, i.e., quit Mail, in the Finder go to
    Trashing the Mail Cache — no difference. The attachments are not re-downloaded from the server, and so the position of the corruption in the image doesn't change.
    What happens if you move or copy the message to a
    local "On My Mac" mailbox, and open the local copy
    instead?
    The local copy then has corrupted attachments.
    /Library/StartupItems/
    Empty.
    /Library/InputManagers/
    SIMBL
    ~/Library/InputManagers/
    Empty.
    /Library/Mail/Bundles/
    Empty.
    ~/Library/Mail/Bundles/
    GPGMail
    Mail.appetizer
    A quick test — disabling these plug-in components has no effect on the corrupted messages, even after re-building the mailbox in question.
    I should point out again that it's not just my machine that's affected by this problem. I verified today that other users of the same server are also affected. This isn't likely to be caused by a quirky configuration on my machine.
    Also, open System Preferences, and go to
    Accounts > Login Items. What do you see
    there?
    LittleSnitchDaemon
    iCalAlarmScheduler
    iCal
    Mail
    SmartReporter
    LiteSwitchX
    MicrosoftMouseHelper
    MouseLocatorAgent
    Skype
    Last.fm
    Renicer
    The items below the line have been added recently, and the problem was definitely there before hand.
    Dylan.
    Powerbook G4   Mac OS X (10.4.8)  

  • Mail wont connect after a certain time

    Ok my mail accounts all work great....i have 5 set up and no problems connecting and retrieving mail......but every now and then the mail will just search for mail continuously to no end......never retrieves any new mail even though its there.....just doesnt connect to the server.....the only way to get this back to normal is to do a reset by holding down the home button and power button......this has happened s few times so far.....any ideas? thanks

    I read that if you hold down the home button and keep it depressed until you return to the launch screen it effectively corrects the problem. I don't know, but I had the problem a few days ago, tried that, and haven't experienced it since.

  • My ipad wont connect to the internet server, help please!

    My ipad suddenly wouldn't connect to the internet so I turned it off and on, checked the settings, there wasn't anything wrong and I could connect to my wifi from my phone in the same location. So I pressed reset and delete all data and settings. Now it wont reset and a message comes up that says "your ipad could not be activated because the activation server cannot be reached:. Try connecting your ipad to itunes to activate it or try again in a couple of minutes." I cant connect to itunes because I cant get past this page in the reconfiguring process. Trying again and again will not work. Can anyone help?
    Thanks.

    By reseting and deleting all data and settings, you wiped your iPad clean of anything that was "yours". Put your iPad into recovery mode and restore from iTunes. Hopefully you have a backup there to recover all your data.
    Recovery Mode
    Backup & Restore
    Restore iOS

  • Cfmx 7 wont connect to MS SQL server

    Hi there, can anyone give me some help with connecting to a
    DB in MS SQL Server? i'm trying to connect via the cfadmin but i
    keep getting the following error when verfiying the DB connection:
    Connection verification failed for data source: sitedirector
    java.sql.SQLException: [Macromedia][SQLServer JDBC
    Driver]Could not establish a connection using integrated security:
    No LoginModules configured for JDBC_DRIVER_01
    The root cause was that: java.sql.SQLException:
    [Macromedia][SQLServer JDBC Driver]Could not establish a connection
    using integrated security: No LoginModules configured for
    JDBC_DRIVER_01

    It looks like you are trying to connect to SQL Server using
    integrated security (windows authentication). In this instance you
    need to make sure that the service that runs CF is logged in as a
    windows user that also has access to the SQL Server. There's a
    notice somewhere on the adobe site detailing what you need to do to
    use integrated security with the CF datadirect jdbc drivers.
    What version of SQL Server?
    What version of CF?

  • Mail wont connect to IMAP

    Anyone else have problems with Mac Mail connecting to an IMAP?
    ive confirmed my settings with my ISP and they have tested them their end and say all my settings are correct and should work and dont kow why they dont.
    Any tips i could try?

    mumbles2701 wrote:
    Anyone else have problems with Mac Mail connecting to an IMAP?
    ive confirmed my settings with my ISP and they have tested them their end and say all my settings are correct and should work and dont kow why they dont.
    Any tips i could try?
    Remove the account and then make it again, backup first.

  • Directory Utility wont connect to Open Directory Server on Xserv 10.5.1

    I am trying to set up the ical service on the xserve, I have the server set up as the OD master when I went into the directory utility app it would not located the server until I changed the search policy to custom which included LDAPv3. Once I did that the server popped up in the directory utility list but it says "server is not responding"
    Any one else having this issue or know what might be the solution?

    Have you tried adding the server to the client using 'servername.local' instead of its DNS name? I have had flaky problems adding clients to the directory server using the DNS name and found using 'servername.local' to be much more reliable.

  • VS2012 Wont Connect to SQL 2012 Server Location

    When I attempt to connect to a SQL 2012 Instance, VS2012 crashes. I can connect fine using SQL Management Studio to the SQL 2012 instance, and my VS2012 connects no problem to my SQL 2008 R2 Instances.
    Any suggestions?

    Hello,
    Have you applied Update 4 for VS 2012?
    http://www.microsoft.com/en-us/download/details.aspx?id=39305
    Could you try to reset VS settings?
    Devenv.exe /ResetSettings
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

Maybe you are looking for

  • Is there a way to have audio only come through the optic cable and video come only through HDMI on Apple TV 3rd Gen?

    I currently have a digital optic cable hook up from my Apple TV 3 to my receiver and a HDMI hook up from my Apple TV 3to my flat screen. The audio is coming out of my TV speakers and receiver at the same time. I was wonder if there was a way to switc

  • Time machine disk doesnt show up

    I have 1T WD , partioned into a bootable drive and a time machine drive recently on the time machine preferences only the bootable drive shows and the "NONE" yet,the bootable drive is one of the excluded (under options) 1. how do I remove the bootabl

  • Custom sorting of templates to be displayed in the report package?

    Hi, Can anyone help me out on how can I sort templates depending on user's input? For example: Template1 = [2] Template2 = [4] Template3 = [3] Template4 = [1] where [1], [2], [3] and [4] is the user's input. The result should display Template4 Templa

  • Awg710 convert from 5.1 to

    Would someone be so kind to help convert the attached LV version 5.1 files to version 11? Much appreciated, LAW Solved! Go to Solution. Attachments: AWG.VI ‏160 KB AWG.LLB ‏420 KB

  • Enabling html snippets

    Hi, I'm a new Contribute user. My web site was designed by a fellow in England using DreamWeaver, but he's no longer involved in the site design. When I went to insert an html snippet, the feature was greyed out in my command line and the instruction