MAIL XI FTP;mails are in XI with error status,need 2 transfer as local file
i m doing a scenario, where i need to pick a file from INBOX and need to place as a file in my sys.
well, it is picking up my mails, so far my mail box is empty.
now, when i checked my presentation server, i havent got the file.
and when i checked " Monitor for processed XML Message" in SXMB_MONI, i can see my messages with RED STATUS FLAG.
error category: mapping
error id: exception during execute
PLEASE come up with suggestions and solutions
now i have two issues,
1. i need to place that file in presentation server.
and to run this config successfully,
2. how to transfer those file from XI SERVER TO presentation
regards
shahid
Message was edited by:
shahid mohammed syed
Message was edited by:
shahid mohammed syed
Hi ,
If you are reading row by row from the attachment of Mail or data .
<b> Did u specied the Interface and namespace in the Mail sender Adpater ?</b>
If u have specified then it will come as row by row in XML format. Then write your own XSLT maping or java mapping to convert it into required format !
Once it transformed then only it will come for receiver determination .
<b> Check in the Communication channel monitoring does it contains any error or not ?</b>
Regards.,
V.Rangarajan
Similar Messages
-
My BDOCs(transaction smw01) are all waiting with yellow status
I don't know why my BDOCs(transaction smw01) are all waiting with yellow status. Shouldn't they be automatically transfering data to my data source. If i manually process the BDOC then data goes to the datasource which can be seen via transaction RSA3. Help?
Hi Kaushal,
I am also facing the similar problem as Prakash, I don't know why my Bdocs are all waiting with yellow status in smw01.I followed your steps but in SMOHQUEUE the status of the queue demon is Hold because of this the status of Bdocs are yellow.If yes would you pls tell me the steps to turn it to green.If i manually do(Reprocess or register that queue in smqr) everything is working fine but is there any way we can turn Bdocs from yellow to green automatically.I appreciate it in advance. If you find any doc. pls fwd it to [email protected]
Thanks a lot
With Regards
Nagamani. -
My BDOCs in CRM are all waiting with yellow status
I don't know why my BDOCs(transaction smw01) are all waiting with yellow status. Shouldn't they be automatically transfering data to my data source. If i manually process the BDOC then data goes to the datasource which can be seen via transaction RSA3. Help?
Message was edited by: Prakash Singhhi Prakash,
again oss note 692195-FAQ: Sales Analytics and CRM-BW data Extraction ?
bwa5 and bwa7, delta is activated ?
and initialization performed in bw ?
626214 619122
3. If there are queues in SMQ1 with erroneous status then activate
these queues.
In Transaction SMQ1 if there are Queues existing with
names beginning with CRM_BWAn (n is number) then
activate these queues in the same transaction.
4.a)If required activate the datasource
Go to transaction BWA5 > select the required datasource and
activate.
4 b) The Delta may not be active ,activate the delta in BWA7 by
selecting the name of the datsource and pressing the candle icon for
'activate delta'.
Symptom
There may be problems or issues related to data tranfer from CRM to BW.
Other terms
CRM-BW extraction,upload,initial,delta,full upload ,Sales Analytics,
Reason and Prerequisites
There could be errors in customization or program errors due to which
data may not be transferred or incorrectly transferred to BW.
Solution
Question 1 : The Extraction from CRM to BW takes a very long time. What
can be done? (Performance Issues)
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available).
How can I extract data in this case?
Question 3 : The Deltas for my data source are not extracted . What can
I do?
Question 4: How can I extract the fields, which are not provided in the
standard data source extraction ?
Question 5: I am unable to extract user status correctly.What should I
do?
Question 6 : What can I do when the activity/Opportunity/Complaint
reasons(Code,CodeGruppe,Katalogart) are not extracted?
Question 7: What can I do if the deleted opportunities
are not reflected in BW?
Question 8: How do I activate the metadata?
Question 9: I donot get any records for the delta upload of my attribute
datasource(s).What is to be done?
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0
and various other BW status mean ?
Solutions
Question 1 : The Extraction from CRM to BW takes a very long time. What can be done? (Performance Issues)
Suggestion 1: Please implement notes 653645 (Collective note) and
639072(Parallel Processing).
The performance could be slow because of the wrong control parameters
used for packaging.
You can change the package size for the data extraction.
Also note that changing the package size in the transaction SBIW
would imply a change for all the extractors. Instead, you could
follow the path in the bw system.
Infopackage (scheduler) > Menu 'Scheduler' > 'DataS. default data
transfer' > maintain the value as 1500 or 1000(This value is variable)
The package size depends on the Resources available at the customer side
(The no of parallel processes that could be assigned =
1.5 times the no of CPU's available approx.)
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available)
Suggestion 2: First check if there are any entries in the table
CRMD_ORDER_INDEX.Only if there are entries in this table you can
extract records.
If this is not the case then,
It is possible that the user does not have sufficient
authorities for extraction of the relevant objects.
Additionally, please review and implement the following notes
615670
161570
150315
618953
If you are in the release 4.0 then
To do BW extraction with the user please see that the following
authorization object exists(display mode is enough):
CRM_ACT, CRM_OPP, CRM_LEAD, CRM_SAO, CRM_SEO, CRM_CO_SE, CRM_CO_SC
CRM_CO_SA, CRM_CON_SE, CRM_CMP, CRM_ORD_OP, CRM_ORD_LP, CRM_ORD_PR
CRM_ORD_OE, CRM_CO_PU, CRM_CO_PD, CRM_ORD_PO
(all these objects are linked to transaction crmd_order).
Question 3 : The Deltas for my data source are not extracted . What can I do?
Suggestion 3: Please check the following.
Please Check if the services have been generated in transaction GNRWB.
If they are not active(not marked 'X' before their names) then activate
the services following the steps here.
Go to transaction GNRWB
Select BUS_TRANS_MSG
Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
Press Generate.
Also check for the following:
1. The delta should have been initialized successfully.
2. Confirm that all Bdocs of type BUS_TRANS_MSG
are processed with success in SMW01.
3. If there are queues in SMQ1 with erroneous status then activate
these queues.
In Transaction SMQ1 if there are Queues existing with
names beginning with CRM_BWAn (n is number) then
activate these queues in the same transaction.
4.a)If required activate the datasource
Go to transaction BWA5 > select the required datasource and
activate.
4 b) The Delta may not be active ,activate the delta in BWA7 by
selecting the name of the datsource and pressing the candle icon for
'activate delta'.
5. In BW system
Go to transaction RSA1 > modeling > infosources > select the
infosource > right mouse click on the selected
infosource > choose option replicate datasource
Activate the infosource.
6. Go to the scheduler for the infosource > select delta in the
update >choose the option PSA only (in the Processing tab)
> start immediately
Check the entry in the RSA7 in the OLTP(CRM system)
Question 4: How can I extract the fields, which are not provided in the standard data source extraction .
Suggestion 4: Follow the steps mentioned below.
1. Enhance Extract Structure with the required fields. (Create & include
an append structure to the extract structure via transaction RSA6).
2.a) Release the fields of the append for usage. ( To do this, double
click on the Datasource and remove the flags in the column 'Hide
Field' for all fields of Append. )
2.b)If the new fields cannot be seen in the extract structure of
the transaction BWA1 then change and save the datasource, and then
activate it in RSA6.
3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
Goto SPRO .
Follow the path ->
SAP Implementation guide ->Implementation with other mySAP components ->
Data transfer to the Business Information Warehouse->
Settings for the application specific datasources (CRM)->
Settings for BW adapter->
Badi :BW adapter :Enhancement of datasources in messaging flow.
4. Replicate the new Datasource to BW.
5. Expand the Communication Structure in BW.
6. Maintain transfer Rules for the new Datasource.
7. Activate the trasfer rules and perform the upload.
Question 5: I am unable to extract user status correctly.What should I
do?
Suggestion 5 :Check the following notes
531875
616062
713458
700714
765281
Question 6 : What can I do when the activity/Opportunity/Complaint
reasons(Code,CodeGruppe,Katalogart) are not extracted.
Suggestion 6 :Check the following notes
481686
516820
603609
617411
711146
Question 7:Deleted opportunities are not reflected in BW.
Suggestion 7: Check the note 706327.
Question 8: How do you activate the metadata?
Suggestion 8:CRM BW adapter meta data has to be activated first before
it is available in the system. You can use Transaction BWA5 to copy the
meta data for selected DataSources. You can reach the transaction via
the IMG maintenance 'SAP Reference IMG -> Settings for SAP Business
Information Warehouse -> Activate BW Adapter Meta Data'. For more
information, see the documentation on the IMG activity 'Activate BW
Adapter Meta Data'. (Note 432485)
Question 9: I donot get any records for the delta upload of my attribute
datasource(s).What is to be done?
Suggestion 9: In case of attribute datasources, it is possible that the
entry for the GUID is missing in the table SMOXAFLD.
If , for example the datasource 0CRM_OPPT_ATTR is not giving deltas
then you can follow the steps:
1)If Delta process is active for the attribute datasource e.g.
0CRM_OPPT_ATTR, then stop the delta process in the BW
system
2) In the CRM system, Make the entry in the table SMOXAFLD
for the datasource with the Key
as 0CRM_OPPT_ATTR GUID 3) Save the entry.Activate the datasource 4) Check that the above entry is replicated in smoxafld_s also after this. 5) Create a transport request manually for the following object R3TR SMO4 0CRM_OPPT_ATTR
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0 and various other BW status mean ?
Suggestion 10: The BW status are used to extract system and user defined
status.
The BW status are defined in the customization settings in SPRO.
Check for-> Status Concept for BP/Product/CRM objects
Here goto-> Process user status You will find the documentation attached here for the user status. Going inside the transaction you will find the status groups USS0, ZIOP,ZMOP etc. The names of the various BW status are derived from this For ex. BW + ST+ One + USS0 gives the name of the field BWSTONEUSS0 or BWST + ONE + ZMOP = BWSTONEZMOP (Master opportunity values) (which means BWST + (status group name) + status object group name) Double clicking on any of the object groups will take you to the values that these status can have . For ex. BWSTONEUSS0 in your system can have values E001 ,E002,E003,E007 which will be shown in RSA3 as BW status values 1,2,3,7, respectively.
Similarly we have Goto -> Process system status (in SPRO). Here you can get the values for the system status in exactly the same way as BWSTONESYS0(Lifecycle status) , BWSTTECSYS2 (Error) etc. In RSA3 you get the names as BW status, To know which corresponds to which status here,Goto the record list in RSA3 . Here goto Settings - Layout -Current . Right click -> Press Show technical field names . You will be able to see the BW status names and will be able to adjust the layout accordingly. -
Some times Child Job with error status
Hi,
We are running some standard report periodically, this report is generationg some child jobs.
Problems is that these child jobs, somtimes are failed with error status.
This is happening very few times,may be 2 or thrice a month.
There's no explanation on this.
I am running with 4.6c version and my Basis is 620.
Can you please add some valuable suggestion for this.
Thanks,
Anmol.What is your question? How to stop the spawned job or how to stop the errors? What program? What is the error or the condition that triggers the error? You have to give more information and be clear about the desired result...
-
ApplicationDidReceiveMemoryWarning and exit with "error status 101"
My application crashed with memory error. It doesn't show any memory leak, but handles a large database and it looks like, its cache causes this problem.
I fixed it by closing database and reopen it inside "applicationDidReceiveMemoryWarning".
It works great on the first call to applicationDidReceiveMemoryWarning (actually significantly dropping the memory usage). But the function is never called again, and my application eventually crashes after a few minutes of heavy usage with "error status 101" .
My understanding is that "error status 101" happens when app doesn't release memory properly on didReceiveMemoryWarning, but in my case, it just crashes without giving me a chance to clean up.
Any idea on what's going on here?Yes, actually, the other answer you got was wrong.
Just throw an error inside the script, probably (given what you want to do) at the end. For example:
osascript -e 'error "This is a test." number 9000'
on the command line will give (on the command line) something like:
6:22: execution error: This is a test (-128)
If you read the man page for osascript, you will see that by default script errors are written to stderr; if you have your shell script watch stderr between the start of the script and the end of it, you'll catch the result message.
A few things to keep in mind:
--> AppleScript can catch its own errors using a "try" block, similar to in other languages. The basic syntax is:
try
(* Do some stuff here *)
on error msg number num
(* Process the error here *)
end try
--> If you throw an error yourself, try to use an error number which is "safe". Most of the negative numbers are already in use as standard signals. For example, -128 is "User canceled", while -43 is "file not found" (which pops up if you cast a string to an alias and the string does not describe a path to a valid item in the filesystem -- that's actually a very simple way to test for file existence). If you use numbers starting with 9000, which seems to be the consensus starting point, then you have the additional advantage of being able to figure out where things went wrong. -
Process chain failed with Error-Status Change of Process ABAP ZL321NIMIMUUT
Hi,
process chain got failed with Error --**Status Change of Process ABAP ZL321NIMIMUUT
Save Status and Trigger Events if Appropriate**Hi Neha,
When we do the repeat after right click then we are getting this messege"--**Status Change of Process ABAP ZL321NIMIMUUT
Save Status and Trigger Events if Appropriate**"
I have come to know that there is one ABAP programe when we go to manage varient.
ABAP Programme"ZBWR_ZMYYNNINOH_CSV_CHANGE" -
Hi Everyone,
How to find all idocs with error status for a given date range?Hi,
Please refer EDIDS for Status and EDIDC for control records.
Also refer the below wiki page for details.
http://wiki.scn.sap.com/wiki/display/ABAPConn/IDoc+Overview
Thanks,
Karthik -
Hi,
I need your help in order to know what shall I do when a work item finishes with error status.
Thanks in advance,
Andrealook at business workflow -> development -> administration -> workflow runtime .
here you have several possibilities
SWPR to restart after error
SWI2_DIAG for diagnostics
SWI2_FREQ to see the details
SWWERRE_DEBUG to debug -
Account removal failed with error: “The operation couldn’t be completed. Unable to find an account for the UID given.”. - trying to remove account but get this message please help
Try to remove the account in the Internet Accounts preference pane.
-
Any forms are not opening with error ORA-01403: no data found in R12
HI ,
Suddenly any of the form are not opening with following error.
FRM-40735: WHEN-NEW-FORM-INSTANCE trigger raised unhandled exception ORA-04063.
Can any one help ?I bounced the database and listner. Have application down.
After
Compile/Reload Applications Database Entities
1. Compile APPS schema
Still I see 5012 apps object invalid.
select
count(*) from dba_objects where status !='VALID' and owner=
'APPS'
COUNT(*)
5012
1 row selected.
is that a normal count I do not have previous baseline to compare with. -
After viewing a jpg file on my Windows 7 PC I get the following message and I don't know how to answer it "Some of thw file types associated with QuickTime applications are currently associated with other applications. Should I restore these file type associations to QuickTime?" Options are " Yes, No or Do not ask to perform yhis check again. QuickTime Control Panel can be used to make subsequent changes."
What shoul I do about this message?Select no.
-
I purchased 3 books from store 2 jhave incomplete downloaded with most chapters with error messages 1 has not downloaded at all
I don't know how to repet the downloadDelete the damaged items, then locate in the store and redownload.
tt2 -
I have some 20 "local" files, but when I want to copy or move a mailing only about half of these are listed as possible destinations. Why are some of then hidden and how can I get the full list to appear in the Move (or the Copy) window?
I can't reproduce that here. I get a whole folder tree to explore.
However, I prefer to use QuickFolderMove.
It turns the '''right-click|Move To''' pop-out into a MRU list along with a text entry box so you seek a folder by entering all or part of its name. The beauty of this is that it doesn't care which folder or account the target folder is in. The downside is that you need to have a pretty clear idea of the name of the folder you're looking for.
https://addons.mozilla.org/en-US/thunderbird/addon/quick-folder-move/?src=api -
Summary:
I have installed Windows 7 Ultimate x64 on my G580. Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
Details:
I bought lenovo G580 with Windows 8. Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64. Everything is working fine but my WLAN card is not recognized because of lack of driver.
The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error. I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
Error - "BCM4313: Can not find setup file"
Drivers Tried:
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028105
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028208
Any help about how to get past this error will be appreciated. The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder. Let me know if I can copy a specific file from there.
Thank you.
BJS
Solved!
Go to Solution.Download this driver bcm4313
Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine. -
Submitting Customized Report Request, Completed with Error Status
Dear All ,
Good Day ,,
1- I am using Oracle Application 11.5.0
2- Application And Data Base Server Unix AI
3- created Oracle Report file (i testes all sql statmets using toad , successfly)
5- Tested the report , passed parameters , it is running successfully .
6- Cpied the reports to the next path (E:\oracle\testappl\per\11.5.0\reports\US)
7- Created Executable file (has the same name of the rdf file)
8- Created Concurrent program contains the same Executable file and the output format is 'PDF', Style = 'Landscape' , printer = 'noprint' , the added the parameters (the same named in the rdf file)
9- Added the Concurrent program to the HRMS 'Reports & Process'
10- From the HRMS Manager Responsibility , i submitted the request , passed the parameters .
11- Refresh , Pending , Runing , phase 'Completed' , Status 'Error'
12-View Log .. :
Human Resources: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
KU_PAYSLIB module: KU_PAYSLIB
Current system time is 31-MAR-2010 23:29:55
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
TIME_PERIOD_ID='442'
ORGANIZATION_ID='1424'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
stat_low = 84
stat_high = 0
emsg:was terminated by signal 4
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 4
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 3192426.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 31-MAR-2010 23:29:56
12-When i change the output format to XML it completes with 'Normal Status' but , the next Log is appearing :
Human Resources: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
KU_PAYSLIB module: KU_PAYSLIB
Current system time is 31-MAR-2010 23:36:19
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
TIME_PERIOD_ID='442'
ORGANIZATION_ID='1424'
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
XML_REPORTS_XENVIRONMENT is :
/apps/oracle/testora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /apps/oracle/testora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
REP-3000: Internal error starting Oracle Toolkit.
Report Builder: Release 6.0.8.28.0 - Production on Wed Mar 31 23:36:20 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT -------------
Printing output file.
Request ID : 3192428
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 31-MAR-2010 23:36:21
Thanks A lot>
emsg:was terminated by signal 4
>
For this issue , pl see the solutions in this related thread - Re: The Concurrent Manager and Programs is failing random
>
REP-3000: Internal error starting Oracle Toolkit.
>
This typically indicates that an X server is not running on the Unix server. Pl see these MOS Docs
200474.1 - Comprehensive REP-3000 Troubleshooting and Overview Guide
207532.1 - Troubleshooting Tips for REP-3000 Error when Running PDF/POSTSCRIPT/HTML Reports
Searching on this topic in these forums will also retrieve many hits.
HTH
Srini
Maybe you are looking for
-
How can I extend the Vector class?
Hi All, I'm trying to extend the Vector class so I can get add a .remove(item:T) method to the class. I've tried this: public class VectorCollection extends Vector.<T> That gives me the compile error "1017: The definition of base class Vector was no
-
Hello, i was wondering if you can help me figure out how to edit a video to zoom in and out with the beat of the music?
-
Convert :- Minutes to Days:Hours:Minutes
Hi Friends , I want to convert the time value from MINUTE to HH : MM : SS I mean in input i have to pass 200 Minutes and in Output i want to get the no of hr and minutes in the format 03 : 20 ( HH:MM) . I have used the FM "CONVERSION_EXIT_SDURA
-
Hi All User General Authorizations are copied through copy express and got the success message in the log file but in the target database for the users some authorizations are copied and some are not when it is tried to add the authorization manually
-
Licensing issues - embedding SQLJ translator
I would like to find out what it would cost to license the SQLJ translator for embedding it my company's product. Can you tell me who I might need to contact to find this out? - Uhyon