MailAdapter - Message gets lost

Hi everyone,
I have configured a Mail-Adapter configured as a Sender.
The Adapter polls a message from a POP3-Server and he should deliver the message to a receiving step of the Intergration Process.
I can tell, from the logs of my mail-server, that the Mail-Adapter polls the message but then the message get's lost.
It doesn't appear in the XML - Monitoring. In the Adapter - Monitoring I'm able to see that the Mail-Adapter received a message.
But then the message is never seen again - it went where no men has gone before - the final frontiers - those are the adventures of the message - ship XI
Any ideas ?
Thanks in advance,
Frank

The iPhone includes RAM (temporary memory) as with your computer.
Different from the email client used on your computer, the iPhone's Mail app doesn't include an automatic save as Draft every so often while composing a message. When leaving a message while being composed, you are prompted to save the message as a Draft. If the iPhone powers off and you aren't prompted to save the message as a Draft, the message is gone. If the message is not in the account's Drafts mailbox, it is gone. When an iPhone is powered off and on, the RAM is cleared/reset - the same with your computer.

Similar Messages

Possiblity of message getting lost

I am using JCAPS 5.1.2. We have an interface where multiple calls are made at the same time to a particular JMS queue. The connection mode of the JMS queue was connection consumer mode and it frequently used to bring down the integration server. We have changed the connction mode of the JMS queue to serial mode which have bring stability to the integration server.
My query is , Is there any chance of any message getting lost from the queue, especially when multiple messages are being sent to the queue at the same time while in the serial mode?

This question really needs to be answered by a Java CAPS expert. I suggest you ask it in the Sun Java CAPS forum at
[http://forums.sun.com/forum.jspa?forumID=882|http://forums.sun.com/forum.jspa?forumID=882]
Nigel

Messages get lost between IE and AE (IDoc to SOAP - Async)

Dear Experts,
in a IDoc to SOAP (Async) scenario a message was not transferred. I could not see any error message in RWB or ABAP Monitoring. When I enter RWB, the column engine is "Integration Engine" and the status is "Successful". At the same time other message with the same message interface were transmitted and they have engine "All" and status "Successful".
Why was this message not passed on to Adapter Engine? How can I restart the processing, so that the message is transfered?
Best regards,
David

Thank you for your answers:
@ Divyesh:
I can't resend the message. It does not have an error status. It says "Successful", although it only can be seen in Integration Engine, not Adapter Engine. There are not SM58 errors.
@ Krish:
In ABAP Monitoring all steps were performed as expected. Before and after this message some other messages with the same message interface were transmitted and they are visible in ABAP Monitoring, Inegration Engine and Adpater Engine.
@Hareenkumar:
In SAP everything looks like expected.
The only difference between this message and other messages sent at the same time (which were transmitted correctly) is that in RWB Message Monitoring (Component: Integration Server) the Engine is "Integration Engine" instead of "All". And the message is not visible when you select for component "Adapter Engine".
Do you have another idea?
Thanks in advance,
David

Soap faultcode and faultstring getting lost

Hi,
I'm having a problem with Adobe Flex not returning the soap
fault details that is being returned in the Soap Fault.
I am using Flashplayer 9,0,16,0 , Adobe Flex Builder 2
Version 2.0.14359 and XFire 1.2 for Webservices.
The Soap Request is :
<SOAP-ENV:Envelope xmlns:xsd="
http://www.w3.org/2001/XMLSchema"
xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance"
xmlns:SOAP-ENV="
http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Body>
<saveUser xmlns="
http://ws.raid.aem.com.au">
<ns0:in0 xmlns:ns0="
http://ws.raid.aem.com.au">
<ns0:administrator xmlns:ns0="
http://vo.ws.raid.aem.com.au">false</ns0:administrator>
<ns0:email xmlns:ns0="
http://vo.ws.raid.aem.com.au">[email protected]</ns0:email>
<ns0:firstName xmlns:ns0="
http://vo.ws.raid.aem.com.au">John</ns0:firstName>
<ns0:id xmlns:ns0="
http://vo.ws.raid.aem.com.au">1</ns0:id>
<ns0:lastName xmlns:ns0="
http://vo.ws.raid.aem.com.au">Smith</ns0:lastName>
<ns0:password xmlns:ns0="
http://vo.ws.raid.aem.com.au">secret</ns0:password>
<ns0:permissions xmlns:ns0="
http://vo.ws.raid.aem.com.au"/>
<ns0:username xmlns:ns0="
http://vo.ws.raid.aem.com.au">jsmith</ns0:username>
</ns0:in0>
</saveUser>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The Soap Respones is :
<soap:Envelope xmlns:soap="
http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="
http://www.w3.org/2001/XMLSchema"
xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance">
<soap:Body>
<soap:Fault>
<faultcode>soap:Client</faultcode>
<faultstring>This message gets
lost!</faultstring>
</soap:Fault>
</soap:Body>
</soap:Envelope>
And the fault that comes through in Flex is :
RPC Fault faultString="HTTP request error"
faultCode="Server.Error.Request" faultDetail="Error: [IOErrorEvent
type="ioError" bubbles=false cancelable=false eventPhase=2
text="Error #2032: Stream Error. URL:
http://localhost/raid/services/UserManager"
URL:
http://raid.aemgroup.com.au/raid/services/UserManager"
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::faultHandler()
at mx.rpc::Responder/fault()
at mx.rpc::AsyncRequest/fault()
at ::DirectHTTPMessageResponder/errorHandler()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/flash.net:URLLoader::redirectEvent()
The soap faultcode and faultstring are getting lost.
Anybody have this problem or know what is going on?
Thanks,
Daniel

Hi ! I have exactly the same problem...
I can't (or don't know how to) access to faultstring and
faultcode generated by the webservice.
Here what I found :
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=3c6784bc
I use a Webservice generated by PHP5 and I don't know how to
change the status code of a response...

I recently thought I lost my iPhone and I erased it but now that I found it. I cannot get the this iPhone message is lost please call ********* I am out of the country my laptop is at home. I cannot access I tune. How do I fix this. I have an iPhone 4s

I recently thought I lost my iPhone and I erased it but now that I found it. I cannot get the this iPhone message is lost please call ********* I am out of the country my laptop is at home. I cannot access I tune. How do I fix this. I need to get it back on so I can face time with my family. The phone says 3G but it keeps saying on list mode. I signed on icloud and removed it from the account and nothing. Please help!

If you removed the device from your iCloud account rather than using the "Stop Lost Mode" option, then you will most certainly need to restore the iPhone, and that will require a computer running iTunes.
http://support.apple.com/kb/HT1414
Regards.

HT1386 Switched from ipod to ipod touch. When trying to sync songs get lost. Show in the library and playlist but a message says cannot be found. An exclamation symbol with a circle aroung it shows on the missing songs. How can I sync the new ipod touch?

Switched from ipod to ipod touch. When trying to sync, songs get lost. Songs show in the library and playlist but get a message that says songs cannot be found. An exclamation symbol with a circle aroung it shows on the missing songs. How can I sync the new ipod touch?

The ! Next to a song:
The song can’t be located; it may have been moved or deleted
To find them try:
iTunes: Finding lost media and downloads
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Synchronous scenario: How to be sure that messages don't get lost?

Dear all,
my scenario is split into two parts:
SAP -> PI : We received a RFC (without sending a response) and split the message into single
files that we saved on PI filesystem
PI -> WS: We send the messages to a web service.
But because we read it from file system I am not quite sure how to handle this. If the
web service is not available a normal synchronous web service message is normally stopped
and can not be restarted. How can I be sure, that the message will not getting lost?
The only way I could see is the support that see the erroneous message an inform the business.
Is it possible to automate the process if the web service is not reachable?
If the web service sends an error code, I can handle this with conditions in receiver determination,
but technical problems will just stop the message, wouldn't it?
Regards
Chris

Hi,
Syncronous messages once failed in PI can not be restarted . To inform business you can use several options :
1. Use Interface specific alert so that when the particular interface fails alert will be triggered and sent to respective recipients.
2. You can also right the ABAP report which sends the emails with payload for the messages which have failed . You can also shedule this report as per your need .
Regards,
Ganesh

Messages are getting lost during server restart

Hi,
we have a clustered environment.
soa_server1, soa_server2, soa_server3 and osb_server1, osb_server2, osb_server3
Queues are configured on each server.
Overall process flow is (JMS Queue (configrued in soa_server1) --> BPEL --> mediator -->JMS (configrued in osb_server1) --> proxyService --> Target System.
When there is a need to bounce the server (start / stop) ; and to make sure messages are not lost during server bounce.
we are following the below procedure for server start
1) pause soa_server1 queues then bounce soa_server1
2) pause soa_server2 queues then bounce soa_server2
3) pause soa_server3 queues then bounce soa_server3
We are observing there is a message lost after server bounce...
thanks in advance
anvv sharma

Are you using XA connection factory? If no then this may cause message loss. It is also considered a best practice to configure error queue for JMS queues to avoid message loss (as a precautionary measure).
How did you find that messages are getting lost?
Regards,
Anuj

Can I recover text messages from an old Iphone that has now been wiped? Some of my messages got lost in between the process of turning my old phone in for a new one-which I have since restored from a backup a few days old

In the process of exchanging my defunct Iphone for a new one, some important text messages were lost. The messages obviously did not transfer over to my new phone as I had to restore my new phone from a backup performed a few days ago. Is there a special trick that will allow me to somehow enter my cell number, since it is still the same, in order to recover texts that were received in between wiping my old phone and getting a new one?

You can use an iPhone file explorer such as TouchCopy to get the messages off the old phone. But you can't put them on the new phone as messages. You could put them in a pdf file that you could read on the new phone.
Normally when you get a new phone the first thing you should do is transfer the contents of the old phone to it (Transfer content from an iPhone, iPad, or iPod touch to a new device - Apple Support)). Then the problem does not arise. You are even prompted to do this when you activate the new phone. Once you have started using the new phone without doing this it is too late.
To tell Apple your concern go to http://apple.com/feedback. This is a user to user forum; Apple does not read or participate in it.

Blank spaces at the end of an IDoc text field get lost when posted to R/3

Hi Guys,
I am facing the following issue:
In an XML file-to-Idoc scenario, there are spaces at the end of a text field in the inbound XML file, which I can see when I open the inbound file with a text editor like notepad, and they are kept after XI mapping is executed (I can see them in message mapping simulator). However, it seems that these spaces get lost once the IDoc is posted to SAP R/3 and they are not visible on SAP R/3 side.
Do you have any idea ? Thanks.
Best Regards,
Evaggelos Gkatzios

That means SAP is removing the spaces from IDoc fields, where you spaces are not allowed. Does it create any problem?
Thanks,
Nabendu.

Mountain Lion mails with attachments on exchange get lost

Dear Community,
we encounter a real annoying and weird issue with CS6 on our Macintoshs using Mountain Lion 10.8.2.
It all started, that mails with attachments (e.g. JPGS, PDFS...) just get lost and do not arrive. Not all mails but some, spontaneously. But always the same files were affected. Some work, some not.
Our company is using Exchange, and there is no message back to the sender, that the mail did not arrive. You can even see it on sent items and it occurs in Outlook 2011 as well as Apple Mail. I contacted our IT and they checked the Exchange logs and everything is fine, like the mail would have arrived, bit it does not.
We went crazy and tried almost everything, clean OS installs, new users... the funny thing: when you forward the mail out of "sent items" it arrives...
Today a milestone appeared while troubleshooting this issue: We realized, that only files saved from Photoshop, Indesign, Illustrator (basically CS6) are affected. When I save a PSD as a JPEG out of Photoshop and mail it as an attachement it gets lost. Always. Same for PDFs or other file formats out of CS6.. When I open a PSD on embedded Mac Viewer and export as JPEG or PDF it does arrive the sender. So it only happens when saving the files out of CS6.
So now, I have no clue how to proceed. Is anybody else having this issue or can help us? It is a mess, because it turns our daily work to a horror.
Any help is appreciated solving this weird issue. Thank you so much.

Hi ,
You can try setting the below value to false and see the results too since its exceeding the recipient thread limit could be a problem with the throttling as well.
<add key="MailboxDeliveryThrottlingEnabled" value="False" />
Restart the transport services after the change and see the results.
Good Luck :)
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com
Hello, thanks for the try,
tried the change in edgetransport.exe.config. Restartet the 4 transport services (Transportdelivery,transportsubmission, transport and transport logsearch) No change though. Problem still exists. May this go into msexchangethrotteling.exe.config?
Regards
Michael

Anchor mobility configuration getting lost in wlc 5508 ios code 7.4.100.0

It is observed that in WLC 5508 , ios 7.4.100.0 , mobility anchor configuration on wlan is getting lost . we configure anchor ip address on guest wlan > mobility anchor > Switch IP Address (Anchor).
We have configured the template on NCS 2.0 to push the anchor mobility ip address on all WLC
Has anyone oberved this behavoiur. We have more than 100 WLC , and everyweek mobility anchor configuration is lost on some WLC having code 7.4.100.0.

I am having this exact same problem. I am running 7.3 on 5508 WLC. My remote site LAP's are using Flex (HREAP). The initial access point that my laptop associates to connects with no problem, as soon as I wander out of range of the initial LAP and into the area of another access point, I lose data connectivity. The was validated like the original post as I start a constant ping on the LAN and watch as the ping latency increases and then ping replies stop. The only way to correct the problem is resetting of the wireless adapter on the laptop. Side note my DroidX has no problem wandering from AP to AP.
Laptop: Windows 7 32bit
I then returned to my home site and test where I have a secondary controller and the LAP's are configured for local mode, no problems roaming from access point to access point. Validated with constant ping test. The pings drop for a second and re-
continues as the laptop reconnects.
**Edit: I am going to try the removing the DHCP Addr. Assignment required option, and report that back to the TAC engineer.
Message was edited by: Michael Dunki-Jacobs
**Edit Solved:***
The problem is in deed solved by turning the "DHCP Address Required" but why?

Imessages getting lost

I have 2 iPhone 4 on my AT&T account. And, it is only with these iPhones do I seem to have this issue. iMessages are not always received between the 2 phones and there is no notification of failures, instead, I ask the other person, did you get my text and they did not. Both iPhones use the same apple ID, but I can't imagine that's the issue. Any ideas on why some iMessages are just getting lost?

I think iMessage is like the Bump App. It could be akin to an immediate "peer to peer" type arrangement coordinated by Mother Apple.
Your device (iPod, iPad, iPhone) tells Mother Apple, via the internet (Wifi or 3G) that mobile No. or an eMail address is "online" and can receive messages.
People who want to message you from their devices are doing the same thing in "advertising" their presence and availability to Mother Apple with their "addresses" which could be phone numbers or eMail addresses.
When you want to send a message then it basically goes via Mother Apple who matches you up and makes the connection. If the other party drops off the internet during the messaging session for any reason, then, whilst your message is considered by Mother Apple to be "delivered" it is not actually received. I don't think Mother Apple have the facility to "hold" or store messages for later delivery, they are just the "exchange". Mother Apple could, however, snoop on conversations and this might be in the fine print of the terms and conditions.
If iMessage (ie an internet connection) is not available, then the SMS will most likely be sent as per the 3G network.
Re-registering your device is probably not a bad idea !

I am unable to get past the first step of Winston Churchill's answer because my phone says "checking for a software update failed because you are not connected to the Internet". Did my WiFi connection also get lost?

I am unable to get past the first step of Winston Churchill's answer because my phone says "checking for a software update failed because you are not connected to the Internet." Did my iphone's WiFi connection also get lost with the Contacts, Mail and Text Messages? When I tried the software update, as recommended by Winston Churchill, the iphone was connected to my desktop which is connected to the Internet.

You can't use your computers Internet connection to update your phone from the phone itself. If you want to use the computers Internet connection to update your phone you must update it through iTunes.

Qosmio X500: Lan/Internet connection get lost after period of time

Hi all,.
I got the qosmio x500 for about half a year now...
I got this problem where after about 5 hours or less the lan/internet connection get lost.
I disabled the wireless connection and is using only the wired connnection now.
When it get disconnected... all devices seems to work seemlessly, no problem can be found. I checked the win7 network adaptor --and it seems to be connected properly.
I haven't got a slightest idea how to fix that.... Only a reset of the system and reloading the os results with a valid connection.
It is even stranger,. When using it for a piriod of time (listeding to audio streams from the web)... when getting back to the machine the audio connection seems to work properly.... but when trying to access other sites, or other machines in the homegroup, or network (under explorer). It result faulty.
Please guide me somehow how to fix the issue, it is bugging me a lot (all these resets to the machine probably doesn't do it any good as well).
thanks in advance,.

Hi,
It could be the energy saving feature of your network card.
Right click Network Icon on the status bar, choose 'Open Network Center and Sharing', Click on 'Connection', Click on 'Properties' (low left button), you'll see the tab with your Network Properties. Click 'Configure' (Upper right button), choose 'Power Management' (last right tab).
Uncheck 'Allow computer to shut down this device to save energy'. Probably your problem will now be solved.
If the names I write aren't exactly right, I'm on a French language computer so my translations can be slightly wrong.
Bye,
Ton
Message was edited by: Tonio78370

MailAdapter - Message gets lost

Similar Messages

Maybe you are looking for