Mailbox auditing log search only shows last 7 days
I have mailbox auditing turned on for a mailbox, and the audit log age limit is set to 90 days. When I run the non admin user access report however it only shows me auditing items for the past 7 days. If i go to powershell, and run search-mailboxauditlog
it shows the same 7 days. Any suggestions?
http://technet.microsoft.com/en-us/library/ff459237(v=exchg.150).aspx
Mailbox audit logs are generated for each mailbox that has mailbox audit logging enabled. Log entries are stored in the Audits subfolder of the audited mailbox Recoverable Items folder. This ensures that all audit logs are available from a single location,
regardless of which client access method was used to access the mailbox or which server or workstation an administrator used to access the mailbox audit log. If you move a mailbox to another Mailbox server, the mailbox audit logs for that mailbox are also
moved because they're located in the mailbox.
By default, mailbox audit log entries are retained in the mailbox for 90 days and then deleted. You can modify this retention period by using the
AuditLogAgeLimit parameter with the
Set-Mailbox cmdlet. If a mailbox is on In-Place Hold or litigation hold, audit log entries are only retained until the audit log retention period for the mailbox is reached. To retain audit log entries longer, you have to increase the retention period by
changing the value for the AuditLogAgeLimit parameter, or export audit log entries before the retention period is reached.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."
Similar Messages
-
Calendar Search only showing last year's entries
Hello,
If I do a search in the calendar, the results are only shown for the past 12 months or so. How can I get the Iphone (3GS) to show all results? I read about an option in the iPhone settings (calendar) but it's not there.
Any suggestion?
Thanks in advance!!That may be its limitation, as spotlight searches calendar events in a two-year window. It will reveal results from one year in the past and one year in the future. If an event has recurrences that fall in this range, it will find the event that is closest to the current date.
-
Search-MailboxAuditLog is empty - Mailbox Audit Logging not working in Exchange 2013 CU6 environment
Hello,
i activated Mailbox Audit Logging for Admin, delegate and owner with all supported operations (update, delete, etc..)
like mentioned here:
http://exchangeserverpro.com/using-exchange-server-2013-mailbox-audit-logging/
But also two days later (and also one Server reboot later) search-MailboxAuditLog is still empty.
any ideas how to fix this?
Best,
martinHi S.Nithyanandham,
i looked up the mailboxfolderstatistics. There are items in the folder:
[PS] C:\Windows\system32>Get-MailboxFolderStatistics mailboxname |where{$_.Name -like "*audit*"}
RunspaceId : a95e32b8-93c3-4330-8d42-45cade9d64d4
Date : 18.09.2014 16:35:20
Name : Audits
FolderPath : /Audits
FolderId : LgAAAADmBpGVdb8iQp3F89WOcmcHAQBpQNFODkTESLeLj74B887wAAAAAAESAAAB
FolderType : Audits
ItemsInFolder : 147
DeletedItemsInFolder : 0
FolderSize : 434.2 KB (444,649 bytes)
ItemsInFolderAndSubfolders : 147
DeletedItemsInFolderAndSubfolders : 0
FolderAndSubfolderSize : 434.2 KB (444,649 bytes)
OldestItemReceivedDate :
NewestItemReceivedDate :
OldestDeletedItemReceivedDate :
NewestDeletedItemReceivedDate :
OldestItemLastModifiedDate :
NewestItemLastModifiedDate :
OldestDeletedItemLastModifiedDate :
NewestDeletedItemLastModifiedDate :
ManagedFolder :
DeletePolicy :
ArchivePolicy :
TopSubject :
TopSubjectSize : 0 B (0 bytes)
TopSubjectCount : 0
TopSubjectClass :
TopSubjectPath :
TopSubjectReceivedTime :
TopSubjectFrom :
TopClientInfoForSubject :
TopClientInfoCountForSubject : 0
SearchFolders :
Identity : mailboxname\Audits
IsValid : True
ObjectState : New
What do you think?
why cant i search and find these entries the auditlog?
best,
martin -
I have an IMAP mailbox that seems to only show mail 7 days on my iMac running Snow Leopard. However, on my MacBook Pro I can see all old mail that I have not deleted. It is running the next operating system (Lion?). Does anyone know how I can get all my old mail back on my iMac. It is my primary computer and I need some of those old messages. I have tried to rebuild the mailbox but it has not done anything.
I have tried to rebuild the mailbox to no avail. The mailbox behavior says: Drafts (not checked) store draft messages on the server, Notes (checked) show not in Inbox, Sent (checked) Store sent messages on the server Delete sent messages when (option never selected), Junt (not checked) store junk messages on the server Delete junk messages when (option never selected), Trash (checked) moves deleted messages to the Trash mailbox and (checked) store deleted messages on the server Permanently erase deleted messages when (one month old option selected).
I have not set up any rules that I know of other than a signature, in the very least I have not changed any. -
Can't enable mailbox audit logs
Hello!
I can't enable mailbox audit logs. I use cmdlet Set-Mailbox -Identity "mailbox" -AuditEnabled $true and Get-Mailbox shows that
audit is enabled. But when i check Get-Mailbox| Get-MailboxFoldersStatistics there is no "Audit" subfolder, and all audit searches also return no results.
I am working now with several Exchange installations (five actually, and one is brand-new test lab) and checked the same in each organization. Result was the same!
I am stronly sure i miss something important, could you point it to me?Hi,
Please use the following command to check the Mailbox Audit Logging action setting.
Get-Mailbox –Identity “username” | fl name,*audit*
Are there any administrator, delegate, and owner actions in the audit logging configuration for that mailbox? Please post them to check this issue.
If the settings above are configured correctly, only the administrator, delegate, and owner actions specified in the audit logging configuration for the mailbox are logged. And the “Audits” folder will show up after the administrator, delegate,
and owner take the actions specified in the audit logging configuration.
By default, these actions in the audit logging configuration should be like this:
AuditAdmin : {Update, Move, MoveToDeletedItems, SoftDelete, HardDelete, FolderBind, SendAs, SendOnBehalf, Create}
AuditDelegate : {Update, SoftDelete, HardDelete, SendAs, Create}
AuditOwner : {}
By the way, which command do you use to search the audit log?
Mailbox audit logging procedures
https://technet.microsoft.com/en-us/library/ff461939%28v=exchg.150%29.aspx?f=255&MSPPError=-2147217396
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support -
When enabling Mailbox Audit Logging would take effect?
I enable the Mailbox Audit Logging by the command below, but found it can't take effect
immediately (I have no idea if there is needs some time to replication ,or others in the DC)even I reboot the exchange server.
So my question is if I want to make the "Mailbox Audit Logging" taking effect immediately , what should I do?
Set-Mailbox -Identity "Ben Smith" -AuditEnabled $true
Set-Mailbox -Identity "Ben Smith" -AuditDelegate SendAs,SendOnBehalf ,,,,,,,,-AuditEnabled $true
Set-Mailbox -Identity "Ben Smith" -AuditAdmin MessageBind,FolderBind,,,,,,,, -AuditEnabled $true
Set-Mailbox -Identity "Ben Smith" -AuditOwner HardDelete,,,,,,,, -AuditEnabled $truehttp://technet.microsoft.com/en-us/library/ff461937(v=exchg.141).aspx
Please click the Mark as Answer button if a post solves your problem!In order to force auditing to run immediately (and be sure it does), you need a few things - you need only one domain controller, and you need to restart the Microsoft Exchange Active Directory Topology service (which will restart all Exchange services)
on all of your Exchange servers. I highly recommend not doing either of these, since they will 1) reduce the availability of your Active Directory, and 2) take all your Exchange databases offline. Auditing will take effect in a short time period
after being set, so all you can do is wait (unless you want to do the above). We do auditing on all our mailboxes and set them when we create the mailbox. That way, we don't need to worry about missing something because it wasn't enabled.
BTW, the above commands don't need all the extra commas, and if you are doing them on a single mailbox, they can be run as a single command:
Set-Mailbox -Identity "Ben Smith" -AuditDelegate SendAs,SendOnBehalf -AuditAdmin MessageBind,FolderBind -AuditOwner HardDelete -AuditEnabled $true -
Why is my Week view in calendar only showing 3 days on one screen?
When I go online to check this out, I see that everyone else's week view (in portrait mode) has the full 5 days on one screen. Mine only shows 3 days at once and I have to swipe to the next screen to see the rest of the week.
Any help appreciated! Thanks!Does any body have any idea?
-
The search only shows my library - no store. have version 12.0.1.26
The search only shows my library - no store. have version 12.0.1.26. Once I upgraded the search itunes store disappeared. Any ideas?
What are you viewing when using the search box ? If you are in the store then it should search the store - is that not happening ?
-
Can we backup mailbox audit log? These logs are stored in the recovery folder in each mailbox. Normally it should be backup with mailbox. How can restore and query these logs from after their audit age limit has expired?
Thanks.
Irfan
Irfan Goolab SALES ENGINEER (Microsoft UC) MCP, MCSA, MCTS, MCITP, MCTHi Irfan,
Base on my knowledge, you can refer to the following methods to backup audit log:
1. Export mailbox audit logs:
https://technet.microsoft.com/en-us/library/jj150552(v=exchg.150).aspx
2. Audit logs can be found in the eventviewer under MSExchangeManagement, you can save it, as below:
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support -
Hi!
We have two exchange servers in our company, ex2010 and ex2013. I set the audit logging to true for some mailbox, but if i run a report at the ex2013 to a specific a mailbox no data at the log. But! if i run a report at the ex2010 ecp website i get information
from the same mailbox (folderbind etc..). I try run a report via shell at the ex2013, no data, same as the gui. The specific mailboxes migrated from ex2010 to ex2013.Hi ToniSlow,
Thank you for your question.
We could run the following command to make sure the mailbox has been moved to Exchange 2013:
Get-Mailbox <username> | FL
Then we could check the item of “database” if this database is on Exchange 2013.
By my understanding, when we move mailbox to Exchange 2013, the mailbox audit logs for that mailbox are also moved because they're located in the mailbox.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support -
TS3899 My email only shows last weeks worth of mail! I want it to show all of my mail previous
My email only shows last weeks worth of mail! I want it to show all of my mail previous
There are a couple of things that could be deleting mail messages.
In Mac's Mail app click on the Mail > Preferences menu item. Now select your offending mail account from the Accounts list. Now click on Advanced. There is a setting to "remove copy from server after retrieving message." The Mail app will delete messages from your email service based on this setting. This will not delete messages from your computer.
If you are losing messages from your computer then click on Rules in Mail's Preferences, then check each "rule" to see if there is one that could be deleting messages. Click on the rule and then on Edit to see the rules criteria
Example of a rule that would delete messages:
If neither of these is your problem I suggest you check with Yahoo to see if there is a setting on their service that could be deleting messages.
Dan -
Mailbox audit log - Not searchable
Exchange 2010 SP2 RU7
I enabled audit on one mailbox using the Set-Mailbox cmdlet. Here is the audit-specific o/p from the mailbox,
AuditEnabled : True AuditLogAgeLimit : 90.00:00:00 AuditAdmin : {Move, MoveToDeletedItems, SoftDelete, HardDelete} AuditDelegate : {Move, MoveToDeletedItems, SoftDelete, HardDelete} AuditOwner : {Move, MoveToDeletedItems, SoftDelete, HardDelete}
I am trying to track who is deleting objects from the mailbox, so I tested whether auditing is actually logging anything by deleting three items at different times from the mailbox. The I run another cmdlet to test whether an audit folder is there and what
are it's contents,
PS C:\temp\ps> Get-MailboxFolderStatistics -Identity "MBX" | ? {$_.Name -eq "Audits" -and $_.FolderType -eq "Audits"} | Format-Table Identity, ItemsInFolder, FolderSize -AutoSize
Identity ItemsInFolder FolderSize
MBX\Audits 3 5.918 KB (6,060 bytes)
Sure enough there are 3 items in there meaning it's auditing those deletions. BUT when I try to search the audit logs using the below command, I get no results (YES I am using the -ShowDetails switch).
Search-MailboxAuditLog -Identity MBX -LogonTypes Admin,Owner,Delegate -ShowDetails -StartDate "2/1/2014" -EndDate "2/10/2014" | ft Operation, OperationResult, LogonUserDisplayName, ItemSubject, LastAccessed, -AutoSize
If there are results in the audit log, then why is the search-mailboxauditlog not presenting them even with the broadest search criteria? I have tried removing the start and end dates too but no luck.
Really frustrated with these half-baked features Microsoft puts into these products. Can someone help?Hi,
In order to troubleshoot the issue more efficiently, I need to clarify some information.
1. Did the issue affect all users or only one specific user?
2. Have you tied to extract the result from ECP or using New-MailboxAuditLogSearch?
3. Is there any error message in the event log?
For this issue, could you please test again using this mailbox you mentioned above to check the result? I tested in my lab, search results are outputed after waiting for some time.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
[SOLVED] Htop only shows last 2 system load values
I have the latest htop (1.0.3) installed on my desktop. The system load meter only shows the last 2 (5 and 15 minute) load averages. Top and uptime display all three values.
How can I get htop to display all three load averages?
Last edited by subraizada3 (2014-06-06 20:45:37)I had searched my filesystem for a htoprc before, I'm not sure why I couldn't find it at that time.
I can't find any fields that seem to be related to this in the htoprc.
~/.config/htop/htoprc:
fields=0 2 48 18 39 47 46 49 1
sort_key=46
sort_direction=1
hide_threads=0
hide_kernel_threads=1
hide_userland_threads=0
shadow_other_users=0
show_thread_names=0
highlight_base_name=1
highlight_megabytes=1
highlight_threads=0
tree_view=1
header_margin=0
detailed_cpu_time=0
cpu_count_from_zero=1
update_process_names=0
account_guest_in_cpu_meter=0
color_scheme=0
delay=15
left_meters=CPU Memory
left_meter_modes=1 1
right_meters=Tasks LoadAverage
right_meter_modes=2 2 -
Display a metric differently only on last day of the month.
Have a Daily transaction fact where unit cost of product is stored at a day/part num /business unit level.
When we drag and drop date column and unit cost in the report like below we will have
Date cost
Sep29 $10
sep30 $12
Oct1 $12
Oct2 $14
..........ans so on
The source sustem program runs on last day of the month around 8pm for setting up cost to reflect on 1st of every month
But the nighly OBI load ( Runs at 2am every day) when incrementally updating Sep30 data picks up $12 from the erp and populates in OBI.
But actually speaking, on Sep30 the cost was $10.
There is no way of running the ERP program to run afer OBI load. Hence we need an expression in the RPD (not answers) saying
when last day of the month (any month) the standard cost must be a previous day value.All other days the same value should be returned.
Is this possible without impacting report performance ?
So, when we drag and drop date and cost value the above report should change as
Date Cost
sep29 $10
sep30 $10
Oct1 $12
Oct2 $14
Oct30 $12.5
Oct31 $12.5
Nov1 $13.5You can achieve the above requirement for current month alone with below steps:
The solution requires to have a union report
First part of the report will have Date and Cost fields with a report level date filter, Date NOT IN (TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_MONTH , 1, TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE))))
Second part of the report will have Date and Cost fields with a report level date filter Date IN (TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_MONTH , 1, TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE))))In the second part of the report,
Change the column formula for Date to display only Current_Date
Change the column formula for Cost field with FILTER(Cost USING Date = Current_Date-1)
Pls mark if correct/helpful. -
Audit log is not showing any data GRC 10 PC
Hi,
when we are trying to execute the audit logs
under reports in process controls,not showing data and getting
error like no data matching the entere selec criteria.
do we need any configuration changes required
Thanks
GRC AdminHello,
check the table DBTABLOG if data contains or not,if no data then maintain the parameter rec/client in RZ11 and try the same
while executing the audit log need to maintain the time frame as HH:MM not HH:MM:SS
check the below link about DBTABLOG
Change Log Monitor Enabling by Table log Activation in SAP Production Environment - Governance, Risk and Compliance - SC…
Regards
Baithi
Maybe you are looking for
-
IPhone 4 will not restore - TRIED EVERYTHING
So I have a multitude of issues with my iPhone 4 and after trying a multitude of fixes that I could find, no change. Here are the issues I'm currently facing: - iPhone will not turn on whlie NOT connected to power source - When connected to computer,
-
Flash play 10.1 BUG before revived in the 11
when params.wmode = "transparent" Does not support the input method other than English
-
Mapping fonts from Mac to Windows in CS4
What is the most efficient process to map fonts in multiple documents opened from Mac to Windows? Currently we are working on 600+ documents that we need to convert to Windows from Mac. Every time we open a new document, the missing fonts dialog come
-
Question: We currently use Oracle 11i and are in need of a screen that will allow us to save, edit and add records. Our current screen only allows records to be entered and submitted to a job protocol. This presents a problem because it takes approx.
-
I have a burned cd-rw that I tried erasing in my superdrive, and the app froze trying to erase it. Now my computer doesnt recognize that there is a disk in the drive. I have tried burning a cd from itunes, but it says "please enter a blank disk". I'v