Mailbox Creation Failed
We just transferred to a new IMac, and I cannot create any mailboxes. I can create Smart Mailboxes (which I find useless), but to create a normal mailbox, I get the message "Unable to create path ~/Library/Mail/Mailboxes/xxxx.mbox." Any suggestions about what I am doing wrong?
Thanks,
Cheryl
In the ~/Library/Mail folder there is a folder for each of your accounts. I take it you only have one. These folders are called POP-mailaccountname or IMAP-mailaccountname. They hold the mailboxes associated with accounts - Deleted, Drafts, Inbox etc. Additional mailboxes that you create are not associated with specific accounts, and go in the Mailboxes folder - or should do, if you could create any.
You did not say whether you have write privileges to the Mailboxes folder. If you haven't, change them so you have. If you have, quit Mail and make a new folder in Mailboxes eg Test.mbox then restart Mail and see if it spots it.
AK
Similar Messages
-
Error msg: Mailbox Creation Failed
I'm getting this error message with: "Unable to create path ~/Library/Mail/Mailboxes/Mail Archive.mbox"
I'm assuming a linked problem is associated with trying to copy my mailboxes from my Powerbook to my desktop. When I couldn't do this - I tried setting up a mailbox on my desktop and got this message.
I couldn't find this topic - any suggestions most welcome!Apparently, Mail has a bug that causes ~/Library/Mail/Mailboxes to sometimes be a file instead of a folder, and that prevents Mail from creating any mailboxes there.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, proceed as follows:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/.
3. Locate Mailboxes. If it’s a file instead of a folder, move it to the Trash.
4. Open Mail. A new Mailboxes folder should be created automatically and that should fix the problem.
If ~/Library/Mail/Mailboxes is already a folder, then the problem must be something else (e.g. a permissions issue). In that case, don’t trash anything. Instead, open /Applications/Utilities/Terminal, type the following command (you can just copy it here and paste it in Terminal), and press <Return>:
ls -ld ~/Library/Mail ~/Library/Mail/Mailboxes
Copy the output of that command from Terminal and paste it in your reply to this post.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library. -
The timesheet creation failed, because of problems with the project I server or with data validation
Hi,
One of my user is facing issue in creating new time sheet,
"The time sheet creation failed, because of problems with the project server or with data validations".
This issue is coming to only few members out of 10000 members.
Note: For the same user, can able to do in other machines. only the problem in his machine. Have ran the office diagnostics, but still the problem persists.
Is any add-on's/any settings need to update in IE. Could any one please help me on how to fix this issue?
Many thanks in advance.I would check the compatibility settings in IE etc, or try another browser (chrome, safari etc.)
Ben Howard [MVP] | web |
blog | book -
Portmap translation creation failed for udp src inside dst inside
Hi!
I have a problem with allowing traffic to UC500 subnets on ASA 5505 inside interface.
My asa is a main router with addres 192.168.1.1
UC500 voip box is connected to ASA's inside interface through UC500 WAN port with UC500 with 192.168.1.2 address.
Firewall and NAT on UC500 is disable
UC500 sip traffic works fine. voipbox creates its subnets for data and voip - 192.168.10.0 and 10.1.1.0. another important address is 10.1.10.1 which is UC500 CUE.
My problem is that from within ASA local network (192.168.1.0) i cannot reach UC500 subnets, neither can I reach ASA's local network from the UC subnets.
the log says
3
Sep 07 2013
00:21:49
DC
53
PBXCUE
32901
portmap translation creation failed for udp src inside:DC/53 dst inside:PBXCUE/32901
I tried exempting uc500 subnets on ASA but that didn;t work.
Funny thing is that I CAN reach the UC500 subnets when connecting with VPN to ASA...
Please help! I am not familiar with CLI.
I configured static route to 10.1.10.0 and since then I was able to ping 10.1.10.1 thorugh ASA;s VPN.
I would be grateful for ideas.
Lukasz
global (inside) 1 interface
global (outside) 101 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 101 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface https IIS https netmask 255.255.255.255 dns tcp 200 200 udp 200
static (inside,outside) tcp interface www IIS www netmask 255.255.255.255 dns tcp 200 200 udp 200
static (inside,outside) tcp interface smtp IIS smtp netmask 255.255.255.255 dns
static (inside,outside) tcp interface pop3 IIS pop3 netmask 255.255.255.255 dns
static (inside,outside) udp interface domain RenBetPBX domain netmask 255.255.255.255 dns
static (inside,outside) udp interface 5061 RenBetPBX 5061 netmask 255.255.255.255 dns
static (inside,outside) udp interface sip RenBetPBX sip netmask 255.255.255.255 dns
static (inside,outside) tcp interface 13000 SQL 13000 netmask 255.255.255.255 dns
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 x.x.x.x
route inside PBXCUE-network 255.255.255.0 RenBetPBX 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicyHello Julio!
Thank you for your advice.
I have managed to solve my main problem by reconfiguring my switches vlans - enabling trunk port configs for required ports and allowing them access to both vlans.
Now I can see everything from all of my inside networks.
I continue my ASA adventures - I have managed to configure L2TP client access for my windows users, RADIUS authentication for domain users and yesterday night I have managed to configure site to site VPN with my RV120W router.
I am only an enthusiast but my recent successes have given me apetite for more...
I keep reading forums and trying to solve most of my problems myself but I have faced another one now and thought that maybe you could give me another tip on where to look for the issue:
I still have one problem with my L2TP VPN config - I have configured split tunnel on the group policy to tunnel only 192.168.1.0 network requests.
access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
My network at home is 192.168.2.0 but it still tunnels everything (when I check my ip after connecting to VPN my home laptop still identifies with ASA gateway(!) address .
access-list outside_access_in extended permit icmp any interface outside object-group DM_INLINE_ICMP_1
access-list outside_access_in extended permit tcp any interface outside object-group DM_INLINE_TCP_1
access-list outside_access_in extended permit tcp any interface outside eq smtp
access-list outside_access_in extended permit tcp any interface outside eq 8080
access-list outside_access_in extended permit tcp any interface outside eq 23456
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 object-group DM_INLINE_NETWORK_1 any
access-list outside_access_in extended permit tcp any interface outside eq 13000
access-list outside_access_in extended permit tcp any interface outside range 8001 8016
access-list outside_access_in extended permit tcp x.x.x.x 255.255.255.0 interface outside eq ssh
access-list inside_nat0_outbound extended permit ip any 192.168.1.240 255.255.255.240
access-list inside_nat0_outbound extended permit ip any PBXVOIP-network 255.255.255.0
access-list inside_nat0_outbound extended permit ip any PBXCUE-network 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 igolomska-network 255.255.255.0
access-list inside_access_in extended permit udp object-group DM_INLINE_NETWORK_2 any object-group DM_INLINE_UDP_1
access-list inside_access_in extended permit ip host IIS any
access-list inside_access_in extended permit ip any any
access-list inside_access_in extended permit ip host RBSTORE_NAS any
access-list inside_access_in extended deny udp any any object-group DM_INLINE_UDP_2
access-list inside_access_in extended permit tcp any any eq 5432
access-list inside_access_in extended permit tcp any host PBXCUE eq www
access-list inside_access_in extended permit tcp host PBXCUE any eq www
access-list inside_access_in extended permit tcp host RBCAMSTORE_NAS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RBSTORE_NAS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RENBETUPS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RenBetPBX host EXCH-MBX eq smtp
access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 igolomska-network 255.255.255.0
route print shows:
and 192.168.1.240 is my VPN IP - its metric has higher priority than the local gateway.
How do I change it?
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.2.1 192.168.2.126 4250
0.0.0.0 0.0.0.0 On-link 192.168.1.240 21
80.51.24.22 255.255.255.255 192.168.2.1 192.168.2.126 4251
127.0.0.0 255.0.0.0 On-link 127.0.0.1 4531
127.0.0.1 255.255.255.255 On-link 127.0.0.1 4531
127.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
169.254.0.0 255.255.0.0 On-link 192.168.2.126 4506
169.254.104.126 255.255.255.255 On-link 192.168.2.126 4506
169.254.255.255 255.255.255.255 On-link 192.168.2.126 4506
192.168.1.240 255.255.255.255 On-link 192.168.1.240 276
192.168.2.0 255.255.255.0 On-link 192.168.2.126 4506
192.168.2.126 255.255.255.255 On-link 192.168.2.126 4506
192.168.2.255 255.255.255.255 On-link 192.168.2.126 4506
224.0.0.0 240.0.0.0 On-link 127.0.0.1 4531
224.0.0.0 240.0.0.0 On-link 192.168.2.126 4506
224.0.0.0 240.0.0.0 On-link 192.168.1.240 21
255.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
255.255.255.255 255.255.255.255 On-link 192.168.2.126 4506
255.255.255.255 255.255.255.255 On-link 192.168.1.240 276
===========================================================================
I am starting to feel like I am using a bit too much of your friendliness ...
Best Regards and have a great day!
Lukasz -
VPN problem behind ASA5505 -regular translation creation failed for protocol 50
Dear All,
I have to connect behind my ASA5505 with an VPN klient to an other site.
First time i got this failure.
"Deny protocol 50 src inside:192.168.50.X dst outside:x.x.x.x by access-group "acl_in" [0x0, 0x0]"
Than I opened our inside (src 192.168.50.0) network the UDP 500,4500 TCP 500,4500,10000 and ESP (dest x.x.x.x remote firewall ip).
access-list acl_in extended permit esp host 192.168.50.0 host x.x.x.x eq isakmp
access-list acl_in extended permit udp host 192.168.50.0 host x.x.x.x eq 500
access-list acl_in extended permit eudp host 192.168.50.0 host x.x.x.x eq 4500
etc.
After that i could connect for the remote firewall with vpn client but i couldn't reach any PC1s on there side and ping gives back no anwser.
Deny protocol 50 was solved but i got an other problem:
"regular translation creation failed for protocol 50 src inside:192.168.50.X dst outside:x.x.x.x"
I found somewhere thet lines can help:
crypto isakmp nat-traversal
inspect ipsec-pass-thru
But this wasn't usefull.
I tried a many thing but i'm stuck.
Could somebody help me what can i do to solve this problem?
Thanks for all anwsers!The solution was the following for one IP!
object network x.x.x.x (inside IP)
host x.x.x.x (inside IP)
nat (inside,outside) static y.y.y.y (remote IP) -
RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation fail
Hi,
During the clone of R12.1 instance, while running the post clone on the DB tier, i am getting the following error
RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation failed.
when i looked into the log file, i can find this
Creating the control file for hr12at1_jsrc-cn6 database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Tue Nov 17 04:41:58 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1318172 bytes
Variable Size 427819748 bytes
Database Buffers 629145600 bytes
Redo Buffers 13049856 bytes
Control file created.
alter database open resetlogs
ERROR at line 1:
ORA-01152: file 2 was not restored from a sufficiently old backup
ORA-01110: data file 2:
'/u01/app/oracle11/db/apps_st/u32/oradata/R12HRM/tx_data11.dbf'
Please help
thanks a lot
SasikalaHi,
Sorry, my mistake, I did not pay attention to the cloning part.
For this error, looks like the database was not cleanly shutdown before copying the files or that preclone was not run successfully. You will have to run preclone again, and shutdown the database normally, then copy the file again.
Regards,
Hussein -
Error encountered in Rapid clone (control file creation failed)
hi all,
i have 2- node ERP server running EBS 11.5.10 with database 9.2.0.5 and OS HP UX 11.11
while running perl adcfgclone.pl dbTier
i encountered the following error
Verifying correctness of adcrdbclone.sql
RC-00115: Not able to read temp001.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp002.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp003.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp004.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp005.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp006.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp001.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp002.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp003.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp004.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp005.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp006.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00116: Error while reading dbf files. Control file creation will fail.
an later part of log file
Creating the control file for DVP_test database ...
SQL*Plus: Release 9.2.0.5.0 - Production on Sun Jan 11 18:29:27 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 598700552 bytes
Fixed Size 737800 bytes
Variable Size 419430400 bytes
Database Buffers 167772160 bytes
Redo Buffers 10760192 bytes
Control file created.
Database altered.
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp001.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp002.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp003.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp004.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp005.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp006.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
but when i query v$tablespace it shows temporary tablespace is TEMP not temp1
even on my production system the TEMPORARy Tablespace is TEMP
when i see the alert file
it says
Tablespace 'TEMP' #2 found in data dictionary,
but not in the controlfile. Adding to controlfile.
File #143 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00143' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #144 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00144' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #145 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00145' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #146 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00146' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #147 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00147' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #148 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00148' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #149 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00149' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #150 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00150' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #151 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00151' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #152 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00152' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #153 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00153' in the controlfile.
This file can no longer be recovered so it must be dropped.
how can i come out though this confusion??i have opened the database but what about the next porcess now
Beginning database tier Apply - Sun Jan 11 17:31:13 2009
Log file located at /oradvp/ora/proddb/9.2.0/appsutil/log/DVP_test/ApplyDBTier_01110531.log
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
ERROR: Failed to execute adclone.pl
Please check logfile.
logfile says
Checking for errors ...
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00376: file 148 cannot be read at this time
ORA-01111: name for data file 148 is unknown - rename to correct file
ORA-01110: data file 148: '/oradvp/ora/proddb/9.2.0/dbs/MISSING00148'
ORA-00600: internal error code, arguments: [1236], [], [], [], [], [], [], []
ORA-24313: user already authenticated
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
ORA-24313: user already authenticated
ORA-01031: insufficient privileges
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 9.2.0.5.0 - Production on Sun Jan 11 18:30:01 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Disconnected
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : test
sDbDomain : khannapaper.com
sDbPort : 1528
sDbSid : DVP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@test.khannapaper.com:1528:DVP
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.khannapaper.com)(PORT=1528))(CONNECT_DATA=(SERVICE_NAME=DVP)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.khannapaper.com)(PORT=1528))(CONNECT_DATA=(SERVICE_NAME=DVP.khannapaper.com)))
Exception occurred: java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=153093376)(ERR=12514)(ERROR_STACK=(ERROR=(CODE=12514)(EMFI=4))))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:469)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:314)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:290)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:131)
at java.lang.reflect.Constructor.newInstance(Native Method)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Unknown Source)
and why does it shows temporary tablespace TEMP1
but in real it is TEMP
i dropped around 50 days back from production and added TEMP to it -
Control file creation failed while installing ---------R12 release 3
While installing R12 release 3 I am getting following error at the time of Step 2 0f 5
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
following is summery of my server hardware
HDD capacity 146GB X 10 nos. ( RAID5 with 2 arrays)
8 GB RAM
Operating System is Red hat Linux Enterprise 4 with Update 5
Following are the HDD partition details
Boot 1GB
Root 50GB
Tem 12GB
SWAP 24GB distributed on two HDD partitions equally
Database and Application HDD portion size 500GB
I am refering Metalink note Note 402310.1 all the setting are correct
Following is kernel settings
kernel.sem = 256 32000 100 142
kernel.shmall = 2097152
kernel.shmmax = 4294967296 ( Half the size of the physical memory is 8GB )
kernel.shmmni = 4096
kernel.msgmax = 8192
kernel.msgmnb = 65536
kernel.msgmni = 2878
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144
All the Pre-req.of installation are passing correctly
• glibc-2.3.4-2.25
• glibc-common-2.3.4-2.25
• binutils-2.15.92.0.2-21
• compat-libstdc++-296-2.96-132.7.2
• gcc-3.4.6-3
• gcc-c++-3.4.6-3
• libgcc-3.4.6-3
• libstdc++-3.4.6-3
• libstdc++-devel-3.4.6-3
• openmotif21-2.1.30-11.RHEL4.6**
• pdksh-5.2.14-30.3
• setarch-1.6-1
• make-3.80-6.EL4
• gnome-libs-1.4.1.2.90-44.1
• sysstat-5.0.5-11.rhel4
• compat-db-4.1.25-9
• control-center-2.8.0-12.rhel4.5
• xscreensaver-4.18-5.rhel4.11
• libaio-0.3.105-2
• libaio-devel-0.3.105-2
these all packeges are avalable on the server some are even are the higher version because OS is with update 5
Doen the installation 3 time with formating , but still facing same problem
All Groups and Users and permitions are correct
runProcess_3
Statusstring Configuring Database
Executing command: /stage/startCD/Disk1/rapidwiz/jre/Linux/1.5.0//bin/java -DCONTEXT_VALIDATED=true -mx512M -classpath /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar oracle.apps.ad.clone.ApplyDatabase -e /test/db/tech_st/10.2.0/appsutil/VIS_test.xml -stage /stage/startCD/Disk1/rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at /test/db/tech_st/10.2.0/appsutil/log/VIS_test/ApplyDatabase_08271904.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.Running Database Install Driver for VIS instance
Succesfully changed Permissions for /test/db/tech_st/10.2.0/appsutil/log/VIS_test
Processing DriverFile = /stage/startCD/Disk1/rapidwiz/template/adridb.drv
Running Instantiation Drivers for /stage/startCD/Disk1/rapidwiz/template/adridb.drv
instantiate file:
source : /stage/startCD/Disk1/rapidwiz/template/adrun10g.sh
dest : /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh
backup : /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh to /test/db/tech_st/10.2.0/appsutil/out/VIS_test/templbac/adrun10g.sh
setting permissions: 755
setting ownership: oracle:dba
instantiate file:
source : /stage/startCD/Disk1/rapidwiz/template/adrundb.sh
dest : /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh
backup : /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh to /test/db/tech_st/10.2.0/appsutil/out/VIS_test/templbac/adrundb.sh
setting permissions: 755
setting ownership: oracle:dba
Step 0 of 5
Command: /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh
Step 1 of 5: Doing UNIX preprocessing
Processing Step 1 of 5
Step 1 of 5
Command: /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh
Step 2 of 5: Doing UNIX preprocessing
Processing Step 2 of 5
Executing: su oracle -c "/test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh"
STARTED INSTALL PHASE : DATABASE : Mon Aug 27 19:06:52 IST 2007
Preparing environment to install databases ...
Setting LD_LIBRARY_PATH to - /stage/startCD/Disk1/rapidwiz/lib/Linux -
Setting PATH to - /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
Setting CLASSPATH to - /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
... installing VISION demo database
FINISHED INSTALL PHASE : DATABASE : Mon Aug 27 19:06:53 IST 2007
su oracle -c "/test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh" has succeeded
Succesfully changed Permissions for /test/db/tech_st/10.2.0/temp
===============================================================================
NetServiceHandler 120.13 started for test at Mon Aug 27 19:06:54 IST 2007
===============================================================================
[ Context Information ]
Host : test
Domain : apps.com
Out Dir : null
Tier Type : DATABASE TIER
Getting connection...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : test
sDbDomain : apps.com
sDbPort : 1531
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@test.apps.com:1531:VIS
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.apps.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
java.lang.NoSuchFieldError: TDU
Please refer to the remaining logs on applications node at - /test/inst/apps/VIS_test/logs/08271731.log
Can Some one pls reply
Thanks and Regards,
AmolpromptUserForDiskPath Oracle Applications Rapid Install - RDBMS & Disk number = 1
Path Obtained by Instantiate File: /prod/stage/oraDB/Disk1 & Disk number = 1
Processing /prod/stage/oraDB/Disk1/dbts/driver/db102.drv file
================================================================
Processing the contents of : Disk1
Processing the driver file : /prod/stage/oraDB/Disk1/dbts/driver/Disk1.drv
UNZIPPING THE DISK1 CONTENTS
UNZIP used: UnZip 5.51 of 22 May 2004, by Info-ZIP. Maintained by C. Spieler. Send
Unzip0 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db58_opmn.zip at /test/db/tech_st/10.2.0/
Unzip0
.end std out.
.end err out.
Unzip0 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db58_opmn.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip1 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db74_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip1
.end std out.
.end err out.
Unzip1 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db74_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip2 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db26_javavm.zip at /test/db/tech_st/10.2.0/
Unzip2
.end std out.
.end err out.
Unzip2 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db26_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip5 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db23_javavm.zip at /test/db/tech_st/10.2.0/
Unzip5
.end std out.
.end err out.
Unzip5 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db23_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip6 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db29_javavm.zip at /test/db/tech_st/10.2.0/
Unzip6
.end std out.
.end err out.
Unzip6 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db29_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip3 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db22_javavm.zip at /test/db/tech_st/10.2.0/
Unzip3
.end std out.
.end err out.
Unzip3 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db22_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip4 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db9_bin.zip at /test/db/tech_st/10.2.0/
Unzip4
.end std out.
.end err out.
Unzip4 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db9_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip8 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db24_javavm.zip at /test/db/tech_st/10.2.0/
Unzip8
.end std out.
.end err out.
Unzip8 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db24_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip9 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db27_javavm.zip at /test/db/tech_st/10.2.0/
Unzip9
.end std out.
.end err out.
Unzip9 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db27_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip7 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db25_javavm.zip at /test/db/tech_st/10.2.0/
Unzip7
.end std out.
.end err out.
Unzip7 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db25_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip12 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db73_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip12
.end std out.
.end err out.
Unzip12 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db73_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip13 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db11_bin.zip at /test/db/tech_st/10.2.0/
Unzip13
.end std out.
.end err out.
Unzip13 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db11_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip14 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db37_lib.zip at /test/db/tech_st/10.2.0/
Unzip14
.end std out.
.end err out.
Unzip14 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db37_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip10 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db20_demo.zip at /test/db/tech_st/10.2.0/
Unzip10
.end std out.
.end err out.
Unzip10 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db20_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip17 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db62_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip17
.end std out.
.end err out.
Unzip17 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db62_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip15 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db54_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip15
.end std out.
.end err out.
Unzip15 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db54_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip16 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db42_lib.zip at /test/db/tech_st/10.2.0/
Unzip16
.end std out.
.end err out.
Unzip16 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db42_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip11 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db19_demo.zip at /test/db/tech_st/10.2.0/
Unzip11
.end std out.
.end err out.
Unzip11 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db19_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip20 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db8_bin.zip at /test/db/tech_st/10.2.0/
Unzip20
.end std out.
.end err out.
Unzip20 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db8_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip19 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db1_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip19
.end std out.
.end err out.
Unzip19 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db1_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip21 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db33_jdk.zip at /test/db/tech_st/10.2.0/
Unzip21
.end std out.
.end err out.
Unzip21 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db33_jdk.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip18 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db40_lib.zip at /test/db/tech_st/10.2.0/
Unzip18
.end std out.
.end err out.
Unzip18 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db40_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip22 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db72_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip22
.end std out.
.end err out.
Unzip22 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db72_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip23 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db35_jlib.zip at /test/db/tech_st/10.2.0/
Unzip23
.end std out.
.end err out.
Unzip23 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db35_jlib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip25 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db53_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip25
.end std out.
.end err out.
Unzip25 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db53_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip26 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db13_ctx.zip at /test/db/tech_st/10.2.0/
Unzip26
.end std out.
.end err out.
Unzip26 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db13_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip27 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db57_wf.zip at /test/db/tech_st/10.2.0/
Unzip27
.end std out.
.end err out.
Unzip27 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db57_wf.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip24 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db0_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip24
.end std out.
.end err out.
Unzip24 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db0_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip29 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db36_jre.zip at /test/db/tech_st/10.2.0/
Unzip29
.end std out.
.end err out.
Unzip29 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db36_jre.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip31 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db14_ctx.zip at /test/db/tech_st/10.2.0/
Unzip31
.end std out.
.end err out.
Unzip31 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db14_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip33 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db70_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip33
.end std out.
.end err out.
Unzip33 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db70_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip28 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db2_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip28
.end std out.
.end err out.
Unzip28 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db2_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip32 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db68_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip32
.end std out.
.end err out.
Unzip32 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db68_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip30 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db52_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip30
.end std out.
.end err out.
Unzip30 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db52_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip34 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db64_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip34
.end std out.
.end err out.
Unzip34 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db64_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip37 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db76_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip37
.end std out.
.end err out.
Unzip37 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db76_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip36 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db90_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip36
.end std out.
.end err out.
Unzip36 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db90_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip35 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db44_md.zip at /test/db/tech_st/10.2.0/
Unzip35
.end std out.
.end err out.
Unzip35 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db44_md.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip40 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db80_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip40
.end std out.
.end err out.
Unzip40 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db80_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip41 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db21_javavm.zip at /test/db/tech_st/10.2.0/
Unzip41
.end std out.
.end err out.
Unzip41 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db21_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip42 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db30_javavm.zip at /test/db/tech_st/10.2.0/
Unzip43 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db49_nls.zip at /test/db/tech_st/10.2.0/
Unzip38 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db31_inventory.zip at /test/db/tech_st/10.2.0/
Unzip38
.end std out.
.end err out.
Unzip38 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db31_inventory.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip39 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db3_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip39
.end std out.
.end err out.
Unzip39 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db3_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip44 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db28_javavm.zip at /test/db/tech_st/10.2.0/
Unzip42
.end std out.
.end err out.
Unzip42 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db30_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
Processing disk file : disk.label in /prod/stage/oraDB/Disk2
Checking the content :disk.label
All contents are valid.....
=============================================================
Processing the contents of : Disk2
Processing the driver file : /prod/stage/oraDB/Disk2/dbts/driver/Disk2.drv
UNZIPPING THE DISK2 CONTENTS
Unzip45 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db60_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip45
.end std out.
.end err out.
Unzip45 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db60_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip46 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db59_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip46
.end std out.
.end err out.
Unzip46 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db59_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip47 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db61_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip47
.end std out.
.end err out.
Unzip47 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db61_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip50 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db63_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip50
.end std out.
.end err out.
Unzip50 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db63_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip48 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db39_lib.zip at /test/db/tech_st/10.2.0/
Unzip48
.end std out.
.end err out.
Unzip48 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db39_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip49 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db65_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip49
.end std out.
.end err out.
Unzip49 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db65_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip51 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db89_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip51
.end std out.
.end err out.
Unzip51 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db89_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip52 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db77_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip52
.end std out.
.end err out.
Unzip52 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db77_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip57 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db69_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip57
.end std out.
.end err out.
Unzip57 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db69_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip55 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db81_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip55
.end std out.
.end err out.
Unzip55 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db81_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip53 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db75_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip53
.end std out.
.end err out.
Unzip53 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db75_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip56 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db83_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip56
.end std out.
.end err out.
Unzip56 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db83_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip58 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db71_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip58
.end std out.
.end err out.
Unzip58 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db71_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip54 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db79_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip54
.end std out.
.end err out.
Unzip54 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db79_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip61 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db67_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip61
.end std out.
.end err out.
Unzip61 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db67_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip60 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db87_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip60
.end std out.
.end err out.
Unzip60 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db87_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip62 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db48_network.zip at /test/db/tech_st/10.2.0/
Unzip62
.end std out.
.end err out.
Unzip62 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db48_network.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip63 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db50_oui.zip at /test/db/tech_st/10.2.0/
Unzip63
.end std out.
.end err out.
Unzip63 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db50_oui.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip59 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db85_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip59
.end std out.
.end err out.
Unzip59 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db85_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip65 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db4_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip64 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db32_jdk.zip at /test/db/tech_st/10.2.0/
Unzip66 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db7_bin.zip at /test/db/tech_st/10.2.0/
Unzip67 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db10_bin.zip at /test/db/tech_st/10.2.0/
Unzip68 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db16_ctx.zip at /test/db/tech_st/10.2.0/
Unzip68
.end std out.
.end err out.
Unzip68 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db16_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip66
.end std out.
.end err out.
Unzip66 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db7_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip65
.end std out.
.end err out.
Unzip65 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db4_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
Processing disk file : disk.label in /prod/stage/oraDB/Disk3
Checking the content :disk.label
All contents are valid.....
=============================================================
Processing the contents of : Disk3
Processing the driver file : /prod/stage/oraDB/Disk3/dbts/driver/Disk3.drv
UNZIPPING THE DISK3 CONTENTS
Unzip71 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db84_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip71
.end std out.
.end err out.
Unzip71 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db84_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip73 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db66_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip73
.end std out.
.end err out.
Unzip73 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db66_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip69 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db55_sysman.zip at /test/db/tech_st/10.2.0/
Unzip69
.end std out.
.end err out.
Unzip69 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db55_sysman.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip72 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db47_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip72
.end std out.
.end err out.
Unzip72 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db47_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip70 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db56_sysman.zip at /test/db/tech_st/10.2.0/
Unzip70
.end std out.
.end err out.
Unzip70 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db56_sysman.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip78 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db86_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip78
.end std out.
.end err out.
Unzip78 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db86_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip74 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db45_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip74
.end std out.
.end err out.
Unzip74 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db45_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip76 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db34_jdk.zip at /test/db/tech_st/10.2.0/
Unzip76
.end std out.
.end err out.
Unzip76 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db34_jdk.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip79 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db78_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip79
.end std out.
.end err out.
Unzip79 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db78_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip81 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db6_assistants.zip at /test/db/tech_st/10.2.0/
Unzip81
.end std out.
.end err out.
Unzip81 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db6_assistants.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip82 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db18_demo.zip at /test/db/tech_st/10.2.0/
Unzip82
.end std out.
.end err out.
Unzip82 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db18_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip83 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db51_perl.zip at /test/db/tech_st/10.2.0/
Unzip83
.end std out.
.end err out.
Unzip83 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db51_perl.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip84 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db41_lib.zip at /test/db/tech_st/10.2.0/
Unzip84
.end std out.
.end err out.
Unzip84 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db41_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip85 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db12_bin.zip at /test/db/tech_st/10.2.0/
Unzip85
.end std out.
.end err out.
Unzip85 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db12_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip86 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db15_ctx.zip at /test/db/tech_st/10.2.0/
Unzip86
.end std out.
.end err out.
Unzip86 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db15_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip87 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db38_lib.zip at /test/db/tech_st/10.2.0/
Unzip87
.end std out.
.end err out.
Unzip87 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db38_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip80 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db88_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip80
.end std out.
.end err out.
Unzip80 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db88_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip77 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db46_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip77
.end std out.
.end err out.
Unzip77 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db46_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip75 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db17_demo.zip at /test/db/tech_st/10.2.0/
Unzip75
.end std out.
.end err out.
Unzip75 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db17_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip89 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db43_lib.zip at /test/db/tech_st/10.2.0/
Unzip88 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db82_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip90 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db5_assistants.zip at /test/db/tech_st/10.2.0/
Unzip89
.end std out.
.end err out.
Unzip89 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db43_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip88
.end std out.
.end err out.
Unzip88 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db82_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
AutoConfig is exiting with status 0
AutoConfig is exiting with status 0
Pls check NO ERROR found -
dear associates,
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instancedear associates,
can u please assist me how can over come this error or problem.
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance -
Index creation failed in Business Objects Explorer
Hi,
I installed the Business Objects Explorer ...
But I can not index anything.
When I try to index the following message appears:
"Server, DRWBI001.PolestarIndexing, generated messages The Following:
Index creation failed. File system Polestar exceptions occurred on the server. Search for Polestar ERROR Within the servers log file for more details. (Can not create directory C: \ Program Files \ Business Objects \ BusinessObjects Enterprise 12.0 \ win32_x86 \ \ Index \ DRWBI001.PolestarIndexing \ InProgress \ ExplorationIndexes \ 35e98114-4831-A254-8dad-497fd3d4bb26 \-30_10.09.41 2010-06. 564) "
What should I do? help me pleaseI do not have UNIVERSE.
I'm trying to index files like Microsoft excel.
I have to do some configuration in the CMC to be able to crawl in Business Objects Explorer?
What should I do to crawl in Business Objects Explorer? -
I have the following:-
VMWare workstation version 9 , with windows server 2008 R2 data center installed.
- I have installed the windows 2008 R2 inside the VM using an iso image.
- The host is windows 7.
I use to work well with the VM, but after adding a new VM to the same workstation . I start getting the following error when starting my old VM
ramdisk device creation failed sue to insufficient memory.
And on the windows boot manger screen they mentioned to :-
inset my windows installation dis and restart my PC.
click “repair your computer”
but not sure if this will fix the problem , baring in mind that the RAM assigned to the VM
is 24 GB & 80 GB hard disk.
The error is
Link.
so can any one advice what is causing this error?
ThanksYou might start by checking the RAM.
http://windows.microsoft.com/en-US/windows7/Diagnosing-memory-problems-on-your-computer
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Ora-3136 then ksvcreate: Process(m000) creation failed and db hangs
Recently upgraded a large database from 10.2.0.4.0 to 10.2.0.5.0.
The database recevies many thousand short-lived connections per minute.
Since the upgrade we're repeatedly running into this problem
Symptoms are that the incoming sessions will start to time out with ora-3136, then the alert log will show
ksvcreate: Process(m000) creation failed
then finally existying connections will freeze and no more connections can be established. I can't even get in to shut the db down normally - i have to kill pmon to get to the point where i can restart it.
Typical alert log pattern:
Thu Feb 02 02:26:51 PST 2012
WARNING: inbound connection timed out (ORA-3136)
Thu Feb 02 02:31:21 PST 2012
ksvcreate: Process(m000) creation failed
Thu Feb 02 02:33:29 PST 2012
ksvcreate: Process(m000) creation failed
Thu Feb 02 02:35:36 PST 2012
kkjcre1p: unable to spawn jobq slave process
Thu Feb 02 02:35:36 PST 2012
Errors in file /scratch/jdevadf/oracle/product/10.2.0/admin/srg102/bdump/srg102_cjq0_5920.trc:
If i look in that file, i get this:
/scratch/jdevadf/oracle/product/10.2.0/admin/srg102/bdump/srg102_cjq0_5920.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORACLE_HOME = /scratch/jdevadf/oracle/product/10.2.0
System name: Linux
Node name: dadvil0075
Release: 2.6.32-100.26.2.el5
Version: #1 SMP Tue Jan 18 20:11:49 EST 2011
Machine: x86_64
Instance name: srg102
Redo thread mounted by this instance: 1
Oracle process number: 10
Unix process pid: 5920, image: oracle@dadvil0075 (CJQ0)
*** 2012-02-01 21:34:08.175
*** SERVICE NAME:(SYS$BACKGROUND) 2012-02-01 21:34:08.149
*** SESSION ID:(3992.1) 2012-02-01 21:34:08.149
ssd_unwind_bp: unhandled instruction at 0x2fb3962 instr=f
*** 2012-02-02 02:34:29.355
Waited for process J001 to initialize for 60 seconds
*** 2012-02-02 02:34:29.362
Process diagnostic dump for J001, OS id=25477
loadavg : 5.22 3.75 3.36
Memory (Avail / Total) = 755.21M / 11706.12M
Swap (Avail / Total) = 1904.80M / 2047.34M
F S UID PID PPID C PRI NI ADDR SZ WCHAN STIME TTY TIME CMD
0 S jdevadf 25477 1 0 80 0 - 680831 semtim 02:33 ? 00:00:00 ora_j001_srg102
Stack:
[Thread debugging using libthread_db enabled]
0x00000038556d5497 in semop () from /lib64/libc.so.6
#0 0x00000038556d5497 in semop () from /lib64/libc.so.6
#1 0x0000000003d91322 in sskgpwwait ()
#2 0x0000000003d73d7a in skgpwwait ()
#3 0x00000000007acf87 in kslges ()
#4 0x00000000007ac8f0 in kslgetl ()
#5 0x0000000000777a37 in kstipg ()
#6 0x0000000000813aaa in ksucrp ()
#7 0x0000000002498644 in kkjrdp ()
#8 0x00000000030b98c7 in opirip ()
#9 0x00000000013a4a2b in opidrv ()
#10 0x0000000001f9e66e in sou2o ()
#11 0x000000000072d2c5 in opimai_real ()
#12 0x000000000072d17c in main ()
A debugging session is active.
Inferior 1 [process 25477] will be detached.
Quit anyway? (y or n) [answered Y; input not from terminal]
Process diagnostic dump actual duration=1.190000 sec
(max dump time=30.000000 sec)
*** 2012-02-02 02:34:30.544
*** 2012-02-02 02:34:40.555
Waited for process J001 to initialize for 70 seconds
*** 2012-02-02 02:34:40.555
Process diagnostic dump for J001, OS id=25477
loadavg : 4.80 3.71 3.35
Memory (Avail / Total) = 728.61M / 11706.12M
Swap (Avail / Total) = 1904.81M / 2047.34M
F S UID PID PPID C PRI NI ADDR SZ WCHAN STIME TTY TIME CMD
0 S jdevadf 25477 1 0 80 0 - 680831 semtim 02:33 ? 00:00:00 ora_j001_srg102
Stack:
[Thread debugging using libthread_db enabled]
0x00000038556d5497 in semop () from /lib64/libc.so.6
#0 0x00000038556d5497 in semop () from /lib64/libc.so.6
#1 0x0000000003d91322 in sskgpwwait ()
#2 0x0000000003d73d7a in skgpwwait ()
#3 0x00000000007acf87 in kslges ()
#4 0x00000000007ac8f0 in kslgetl ()
#5 0x0000000000777a37 in kstipg ()
#6 0x0000000000813aaa in ksucrp ()
#7 0x0000000002498644 in kkjrdp ()
#8 0x00000000030b98c7 in opirip ()
#9 0x00000000013a4a2b in opidrv ()
#10 0x0000000001f9e66e in sou2o ()
#11 0x000000000072d2c5 in opimai_real ()
#12 0x000000000072d17c in main ()
A debugging session is active.
Inferior 1 [process 25477] will be detached.
Quit anyway? (y or n) [answered Y; input not from terminal]
[repeated for several processes]
I can upload the files or they are available on the internal network.
Initially i thought it was bug 8426816, but that's supposed to be included in the 10.2.0.5.0 patchset.Hi;
Symptoms are that the incoming sessions will start to time out with ora-3136, then the alert log will show
ksvcreate: Process(m000) creation failedDid you check note Troubleshooting Guide (TSG) - ksvcreate: Process(xxxx) creation failed [ID 1379200.1] ?
Regard
Helios -
Exchange 2003 to 2010 mailbox migration fails
I'm trying to move users from my single 2003 server to my 2010 3-node DAG.
I get this error for several of the mailboxes I'm moving:
Error: Mailbox changes failed to replicate. Database 33da328a-9b34-43ba-8914-1be08f143e17 doesn't satisfy the constraint SecondCopy because the commit time 2/14/2014 9:01:30 AM isn't guaranteed by replication time 2/14/2014 8:55:22 AM.
When I manually kick off a move I notice the CQL and the RQL will sometimes get in the hundreds on my third server.
I queued up about 40 users totaling about 45 GB to be moved last night and 11 of them failed with the above error.
I have a very simple setup.
3 servers
1 DAG
1 active DB and 2 passive copies
All servers are virtualized with each running on a separate host
Each VM is connected to a NetApp SAN via iSCSI
All 3 VMs have 2 redundant connections per vNIC and are connected to 2 different switches
All 3 VMs are local, none are remote
The MSExchangeMailboxReplication.exe.config looks like this:
MaxMoveHistoryLength = "2"
MaxActiveMovesPerSourceMDB = "5"
MaxActiveMovesPerTargetMDB = "5"
MaxActiveMovesPerSourceServer = "50"
MaxActiveMovesPerTargetServer = "5"
MaxTotalMovesPerMRS = "100"
I know about setting the DataMoveReplicationConstraint to None trick but I don't think I need to do that since none of my databases are on a WAN. Shouldn't my local moves be able to keep up? That sounds like a band-aid and not a true fix
to the underlying problem.
Could this be an issue with the source server's disk speed?
I've turned the firewalls off on all the servers but still encountered the errors.
My content indexes are healthy.
I've checked the switches and the VMware servers for misconfigurations and errors.
I'm researching the various PerfMon counters to watch now to see if it could be disk-related.I've been watching this server over the past couple of days and researching the performance output.
==========
Good Server:
Physical Disk: Avg. Disk sec/Read (DB): Usually between 10 and 50
Physical Disk: Avg. Disk sec/Write (LOGS): Less than 10
Bad Server:
Physical Disk: Avg. Disk sec/Read (DB): Constant spikes to 100 (1-2 times every 10 seconds)
Physical Disk: Avg. Disk sec/Write (LOGS): Spikes to 30-40 2-3 times per 10 second interval
The % Processor Time rarely hits 10
The Avg. Disk sec/Transfer for C: is mostly 0
Bytes Received/sec MAPI is less than 10 with spikes to 45. This is a Passive node so that's to be expected.
Bytes Received/sec iSCSI is 100 steady with no drops
Bytes Receied/sec REPL is less than 10
Bytes Sent/sec MAPI spikes from 10-20
Bytes Sent/sec iSCSI usually stays at 100 with the occasional drop to 10
Bytes Send/sec REPL is less than 10
Output Queue Length for all three NICs is 0
No Received or Outbound Packet Errors
==========
The vSphere versions of both physical servers are identical as is all of the firmware.
Regarding the guest OS on each, the good server has an older NIC (vmxnet3) driver, whereas the bad server has a newer driver.
The iSCSI Initiator on each guest OS is the same version.
The switch configs are identical for every iSCSI port and there are no errors on either. -
Spatial query index creation fails with ORA-13282: failure on initializatio
Hi,
I have an Oracle 10g 10.2.0.5.0 database newly installed. Spatial index creation fails:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13282: failure on initialization of coordinate transformation
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 10
The script I am trying to run is:
Insert into USER_SDO_GEOM_METADATA
(TABLE_NAME, COLUMN_NAME, DIMINFO, SRID)
Values
('SOME_TABLE', 'geo',
"SDO_DIM_ARRAY"(
"SDO_DIM_ELEMENT"('X',600000,900000,0.001),
"SDO_DIM_ELEMENT"('Y',150000,400000,0.001)), 23700);
CREATE INDEX IX_GEO_SOME_TABLE ON SOME_TABLE (GEO) INDEXTYPE IS MDSYS.SPATIAL_INDEX ;
Earlier I had some issues with NLS settings in relation to Spatial, but in this particular case setting the NLS_LANG for AMERICAN_AMERICA does not help. I found this comment http://www.orafaq.com/forum/t/127312/2/ but would not like to hack around with MDSYS table content. Any help is highly appreciated.
Regards, TamasTamas,
1 . . .Are you indexing a table that already has geometries or an empty table?
. . . .If the former, do all the geometries in that table have the same (not NULL) SRID (23700)?
2 . .The link you posted suggests a parsing problem since in Hungarian (23700), the decimal seperator is a comma (not a period). Accordingly, I believe the edit to mdsys.sdo_cs_srs.WKTEXT would be:
PROJCS["HD72 / EOV", GEOGCS [ "HD72", DATUM ["Hungarian Datum 1972 (EPSG ID 6237)", SPHEROID ["GRS 1967 (EPSG ID 7036)", 6378160, 298,247167427]], PRIMEM [ "Greenwich", 0,000000 ], UNIT ["Decimal Degree", 0,01745329251994328]], PROJECTION ["Egyseges Orszagos Vetuleti (EPSG OP 19931)"], UNIT ["Meter", 1]]
^ ^ ^ Regards,
Noel -
RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation failed
There's anyone ever get error like this?
[oradev@ebs bin]$ ./adcfgclone.pl dbTier
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = "en_US.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Copyright (c) 2011 Oracle Corporation
Redwood Shores, California, USA
Oracle E-Business Suite Rapid Clone
Version 12.2
adcfgclone Version 120.63.12020000.7.1202010.2
Enter the APPS password :
Running:
/u01/DEV/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -cp /u01/DEV/11.2.0/appsutil/clone/jlib/java:/u01/DEV/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojdbc5.jar oracle.apps.ad.context.CloneContext -e /u01/DEV/11.2.0/appsutil/clone/bin/../context/db/CTXORIG.xml -validate -pairsfile /tmp/adpairsfile_21933.lst -stage /u01/DEV/11.2.0/appsutil/clone 2> /tmp/adcfgclone_21933.err; echo $? > /tmp/adcfgclone_21933.res
Log file located at /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log
Provide the values required for creation of the new Database Context file.
Target System Hostname (virtual or normal) [ebs] :
Target Instance is RAC (y/n) [n] :
Target System Database SID : DEV
Target System Base Directory : /u01/DEV
Target System utl_file_dir Directory List : usr/tmp
RC-00213: Warning: The path specified must be the absolute path
Target System utl_file_dir Directory List : /usr/tmp
Number of DATA_TOP's on the Target System [1] :
Target System DATA_TOP Directory 1 [/apps/DEV/data] : /u01/DEV/data
Target System RDBMS ORACLE_HOME Directory [/u01/DEV/11.2.0] :
Do you want to preserve the Display [null] (y/n) : n
Target System Display [ebs:0.0] :
Do you want the target system to have the same port values as the source system (y/n) [y] ? : n
Target System Port Pool [0-99] : 0
Checking the port pool 0
RC-50221: Warning: Port Pool 0 is not free. Please check logfile /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log for conflicts.
Target System Port Pool [0-99] : 0
Checking the port pool 0
done: Port Pool 0 is free
Report file located at /u01/DEV/11.2.0/appsutil/temp/portpool.lst
Complete port information available at /u01/DEV/11.2.0/appsutil/temp/portpool.lst
Creating the new Database Context file from :
/u01/DEV/11.2.0/appsutil/template/adxdbctx.tmp
The new database context file has been created :
/u01/DEV/11.2.0/appsutil/DEV_ebs.xml
Log file located at /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log
Check Clone Context logfile /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log for details.
Running Rapid Clone with command:
Running:
perl /u01/DEV/11.2.0/appsutil/clone/bin/adclone.pl java=/u01/DEV/11.2.0/appsutil/clone/bin/../jre mode=apply stage=/u01/DEV/11.2.0/appsutil/clone component=dbTier method=CUSTOM dbctxtg=/u01/DEV/11.2.0/appsutil/DEV_ebs.xml showProgress contextValidated=true
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Beginning database tier Apply - Sun Mar 29 11:35:27 2015
/u01/DEV/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/u01/DEV/11.2.0/oui -classpath /u01/DEV/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojdbc6.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/java:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/OraInstaller.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/ewt3.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/share.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/srvm.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyDBTier -e /u01/DEV/11.2.0/appsutil/DEV_ebs.xml -stage /u01/DEV/11.2.0/appsutil/clone -showProgress
APPS Password : Log file located at /u01/DEV/11.2.0/appsutil/log/DEV_ebs/ApplyDBTier_03291135.log
\ 50% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
Sun Mar 29 11:46:03 2015
ERROR: Failed to execute /u01/DEV/11.2.0/appsutil/clone/bin/adclone.pl
Please check logfile.
[oradev@ebs bin]$perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C")
Please check - $ env | grep LC
If its set to LC_CTYPE = UTF-8 then unset or set it to blank value i.e. export LC_CTYPE =
Please see - ODA: oakcli command failed with perl: warning: Setting locale failed. (Doc ID 1526079.1)
-Kj
Maybe you are looking for
-
Media Encoder CS6 won't launch - Mountain Lion
After recently updating, Media Encoder will not launch. I have tried searching for "watched folders" xml, which many say solved this issue for them on Windows, but cannot find any such file in ML. Any suggestions? I am running: Mountain Lion Mac Pro
-
How to authenticate Username and password in MVC using Azure Active Directory
Need a sample application where in need to authenticate user entered logindetails using Azure Active directory.
-
I need to Re-download Photoshop onto a new computer
How do i download photoshop onto my new computer. My old computer crashed, and I need to know how to get photoshop on my new one. Where do I start?
-
I need to create RFC function module which creates the IDOC
Hi- Any idea how to create RFC function module which creates the outbound IDOC. If you have any sample code please forward to me. Thanks, Sony
-
Why won't Thunderbird open for me?
I was able to open Thunderbird last night. This morning, I was unable to open it, even after I typed in my password. After entering my password, I got the message "sending of password did not succeed. Mail server pop.mindspring.com responded: bad pas