Mailbox database contentindex state is failed

Hi,
I have two mailbox servers in DAG (MBX01 & MBX02).
when I check database copy status it show contentindex state failed on mbx02 server.
I tried with command update-mailboxdatabasecopy -identity database1 -catalogonly but it is gives error;
The operation couldn't be performed because 'database\*' matches multiple entries.
how to resolve it, please share resolution.

Hi,
Please seed the content index catalog using the Update-MailboxDatabaseCopy -CatalogOnly cmdlet to check the result.
You need to specify the Mailbox server on which the database1 is, here is an example for your reference.
Update-MailboxDatabaseCopy -Identity DB1\MBX2 -SourceServer MBX1 -CatalogOnly
For more details about this command, you can refer to the article below.
http://technet.microsoft.com/en-gb/library/dd335201(v=exchg.141).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Similar Messages

Database ContentIndex State: FailedAndSuspended in DAG

I have two exchange 2013 SP1 servers in DAG Exch01 and Exch02.
when I checked database copy status, it is showing contentindex state failed all four databases on both two servers.
I tried with command "Get-MailboxDatabaseCopyStatus * | where {$_.ContentIndexState -eq "FailedAndSuspended"} | Update-MailboxDatabaseCopy -CatalogOnly" but this didn't helped.
I have tried to delete the index folders and reseed, also tried reseeding complete mailbox with no luck.
Restarting server didn't helped as well.

well we are using VMware and this error was happening due to Network card settings and NIC was losing the packets. below is How to Fix..
http://blogs.technet.com/b/askcore/archive/2013/06/03/nodes-being-removed-from-failover-cluster-membership-on-vmware-esx.aspx
On each NIC on each node in the cluster, please do the following:
a) Click Start
èControl Panel
èDevice Manager. b) Right-click
vmxnet3 and click Properties. c) Click the Advanced tab. d) Click
Small Rx Buffers and increase the value to 8192. (The default value is 512 and the maximum is 8192. ) e) Click
Rx Ring #1 Size and increase the value to 4096. (The default value is 1024 and the maximum is 4096. ) Reference:
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2039495

Primary Mailbox Database fails to replicate after failing over to secondary copy in DAG

We had an issue yesterday on a primary mailbox database server when the drive the log files are located on filled up and took the databases off-line on the primary server bringing them up on the secondary.
After the issue was resolved and enough space was freed up, all but one database failed back. The one that would not come back showed Failed in the copy status. It remained mounted on the secondary server. I attempted several times to 'update' the copy and
it would run for aver 40 minutes and look like it was going okay then it would 'fail' and end up in a 'failed and suspended' state. The error would indicated it could not complete because the it could not find the source server.
The Update job was configured to point to the server holding the secondary copy as the source so should not have a problem.
Any idea on how I can get the primary copy working again? I thought about making the second copy the 1st to activate and removing the primary copy from the DAG and recreating it, but past experience doing that did not resolve the issue.
Thank you,
Nick
Nick Laurino

Find out why database file is missing, I doubt on antivirus and start looking at the antivirus sacanning exclusion to ensure it is properly set...
File-Level Antivirus Scanning on Exchange 2010
Then try to reseed the database copy from a good source, it might be possible that antivirus would be scanning file when it is getting reseeded and causing issue...
How to Reseed a Failed Mailbox Database Copy in Exchange Server 2010
Blog |
Get Your Exchange Powershell Tip of the Day from here

Failed to Manually Seed the Mailbox Database Copy on Exchange 2013

Hi,
I tried to manually seed the mailbox database copy via exchange shell by run this command
Update-MailboxDatabaseCopy –Identity “DB_name\Server” -sourceserver "Name Server" –DeleteExistingFiles.
However, i got the error message whereas shown below.
A parameter cannot be found that matches parameter name 'identity'.
    + CategoryInfo          : InvalidArgument: (:) [Update-MailboxDatabaseCopy], ParameterBindingException
    + FullyQualifiedErrorId : NamedParameterNotFound,Update-MailboxDatabaseCopy
    + PSComputerName        : XXXX.abc.XXX
Any ideas?

I hope database is in suspended state and not in failed state.
Make sure EMS is running As Administrator.
http://technet.microsoft.com/en-us/library/dd335201(v=exchg.150).aspx
Cheers,
Gulab Prasad,
Technology Consultant
Blog:
www.exchangeranger.com
Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Mailbox Database Content Index Failed and Suspended

Hello,
     I am having an issue with a Mailbox Database. The content index shows FailedAndSuspended. there are no Bad Copy Counts and it shows as Mounted. I have no DAG so this is a single database and followed the article
here:
http://technet.microsoft.com/en-us/library/ee633475(v=exchg.150).aspx
After it crawled for a little while it went to Failed, then unknown, then crawling, and has finally ended up at FailedAndSuspended again. I am also popping errors as follows:
MSExchangeFastSearch Event ID 1004
MSExchangeIS Event ID 1012
MSExchange ADAccess Event ID 4020
MSExchangeRepl Event ID 4087 (Though this is weird as it is a stand alone database why would it try to replicate it?)
MSExchange Common Event ID 4999
The following Warnings are hitting at the same time:
MSExchangeFastSearch Event ID 1006, 1009, 1010
MSExchange Mid-Tier Storage Event ID 6002, 10010
Anyone have any thoughts on a fix for this?
Michael R. Mastro II

Ok I did a Set-MailboxDatabase "Mailbox Database #" -IndexEnabled $false, then stopped both the MS Exchange Search and MS Exchange Search Host Controllers. Started them again and it showed disabled when I did a get-mailboxdatabasecopystatus. I then went
Set-MailboxDatabase "Mailbox Database #" -IndexEnabled $true. After about 10 minutes got a FailedAndSuspended Status. So here are the logs from event viewer.
Log Name:      ApplicationSource:        MSExchange Mid-Tier StorageDate:          7/20/2014 7:53:49 PMEvent ID:      6002Task Category: ResourceHealthLevel:         WarningKeywords:      ClassicUser:          N/AComputer:      MRM2EX1.MRM2Inc.comDescription:Ping of mdb '7d98ce58-997c-41c1-abde-06d7eaf3dbdd' timed out after '00:00:00' minutes. Last successful ping was at '7/20/2014 11:53:49 PM' UTC.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System>    <Provider Name="MSExchange Mid-Tier Storage" />    <EventID Qualifiers="32768">6002</EventID>    <Level>3</Level>    <Task>6</Task>    <Keywords>0x80000000000000</Keywords>    <TimeCreated SystemTime="2014-07-20T23:53:49.000000000Z" />    <EventRecordID>703314</EventRecordID>    <Channel>Application</Channel>    <Computer>MRM2EX1.MRM2Inc.com</Computer>    <Security /> </System> <EventData>    <Data>7d98ce58-997c-41c1-abde-06d7eaf3dbdd</Data>    <Data>00:00:00</Data>    <Data>7/20/2014 11:53:49 PM</Data> </EventData></Event>
Log Name:      ApplicationSource:        MSExchangeFastSearchDate:          7/20/2014 7:37:17 PMEvent ID:      1006Task Category: GeneralLevel:         WarningKeywords:      ClassicUser:          N/AComputer:      MRM2EX1.MRM2Inc.comDescription:The FastFeeder component received a connection exception from FAST. Error details: Microsoft.Exchange.Search.Fast.FastConnectionException: Connection to the Content Submission Service has failed. ---> Microsoft.Ceres.External.ContentApi.ConnectionException: Recovery failed after 0 retries   at Microsoft.Ceres.External.ContentApi.DocumentFeeder.DocumentFeeder.CheckRecoveryFailed()   at Microsoft.Ceres.External.ContentApi.DocumentFeeder.DocumentFeeder.SubmitDocument(Document document, TimeSpan timeout)   at Microsoft.Ceres.External.ContentApi.DocumentFeeder.DocumentFeeder.SubmitDocument(Document document)   at Microsoft.Exchange.Search.Fast.FastFeeder.SubmitDocumentInternal(Object state)   --- End of inner exception stack trace ---Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System>    <Provider Name="MSExchangeFastSearch" />    <EventID Qualifiers="32772">1006</EventID>    <Level>3</Level>    <Task>1</Task>    <Keywords>0x80000000000000</Keywords>    <TimeCreated SystemTime="2014-07-20T23:37:17.000000000Z" />    <EventRecordID>703192</EventRecordID>    <Channel>Application</Channel>    <Computer>MRM2EX1.MRM2Inc.com</Computer>    <Security /> </System> <EventData>    <Data>Microsoft.Exchange.Search.Fast.FastConnectionException: Connection to the Content Submission Service has failed. ---> Microsoft.Ceres.External.ContentApi.ConnectionException: Recovery failed after 0 retries   at Microsoft.Ceres.External.ContentApi.DocumentFeeder.DocumentFeeder.CheckRecoveryFailed()   at Microsoft.Ceres.External.ContentApi.DocumentFeeder.DocumentFeeder.SubmitDocument(Document document, TimeSpan timeout)   at Microsoft.Ceres.External.ContentApi.DocumentFeeder.DocumentFeeder.SubmitDocument(Document document)   at Microsoft.Exchange.Search.Fast.FastFeeder.SubmitDocumentInternal(Object state)   --- End of inner exception stack trace ---</Data> </EventData></Event>
Log Name:      ApplicationSource:        MSExchangeFastSearchDate:          7/20/2014 7:43:22 PMEvent ID:      1010Task Category: GeneralLevel:         WarningKeywords:      ClassicUser:          N/AComputer:      MRM2EX1.MRM2Inc.comDescription:An operation attempted against a FAST endpoint exprienced an exception. This operation may be retried. Error details: Microsoft.Exchange.Search.Fast.PerformingFastOperationException: An Exception was received during a FAST operation. ---> System.ServiceModel.CommunicationException: The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '00:01:00'. ---> System.IO.IOException: The write operation failed, see inner exception. ---> System.ServiceModel.CommunicationException: The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '00:01:00'. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host   at System.Net.Sockets.Socket.Send(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)   at System.ServiceModel.Channels.SocketConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   --- End of inner exception stack trace ---   at System.ServiceModel.Channels.SocketConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   at System.ServiceModel.Channels.BufferedConnection.WriteNow(Byte[] buffer, Int32 offset, Int32 size, TimeSpan timeout, BufferManager bufferManager)   at System.ServiceModel.Channels.BufferedConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   at System.ServiceModel.Channels.ConnectionStream.Write(Byte[] buffer, Int32 offset, Int32 count)   at System.Net.Security.NegotiateStream.StartWriting(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest)   at System.Net.Security.NegotiateStream.ProcessWrite(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest)   --- End of inner exception stack trace ---   at System.Net.Security.NegotiateStream.ProcessWrite(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest)   at System.Net.Security.NegotiateStream.Write(Byte[] buffer, Int32 offset, Int32 count)   at System.ServiceModel.Channels.StreamConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   --- End of inner exception stack trace ---Server stack trace:    at System.ServiceModel.Channels.StreamConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   at System.ServiceModel.Channels.StreamConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout, BufferManager bufferManager)   at System.ServiceModel.Channels.FramingDuplexSessionChannel.OnSendCore(Message message, TimeSpan timeout)   at System.ServiceModel.Channels.TransportDuplexSessionChannel.OnSend(Message message, TimeSpan timeout)   at System.ServiceModel.Channels.OutputChannel.Send(Message message, TimeSpan timeout)   at System.ServiceModel.Dispatcher.DuplexChannelBinder.Request(Message message, TimeSpan timeout)   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)Exception rethrown at [0]:    at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)   at Microsoft.Ceres.ContentEngine.Admin.FlowService.IFlowServiceManagementAgent.GetFlows()   at Microsoft.Exchange.Search.Fast.IndexManager.<GetFlows>b__16()   at Microsoft.Exchange.Search.Fast.IndexManagementClient.PerformFastOperation[T](Func`1 function, String eventLogKey)   --- End of inner exception stack trace ---Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System>    <Provider Name="MSExchangeFastSearch" />    <EventID Qualifiers="32772">1010</EventID>    <Level>3</Level>    <Task>1</Task>    <Keywords>0x80000000000000</Keywords>    <TimeCreated SystemTime="2014-07-20T23:43:22.000000000Z" />    <EventRecordID>703224</EventRecordID>    <Channel>Application</Channel>    <Computer>MRM2EX1.MRM2Inc.com</Computer>    <Security /> </System> <EventData>    <Data>Microsoft.Exchange.Search.Fast.PerformingFastOperationException: An Exception was received during a FAST operation. ---> System.ServiceModel.CommunicationException: The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '00:01:00'. ---> System.IO.IOException: The write operation failed, see inner exception. ---> System.ServiceModel.CommunicationException: The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '00:01:00'. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host   at System.Net.Sockets.Socket.Send(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)   at System.ServiceModel.Channels.SocketConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   --- End of inner exception stack trace ---   at System.ServiceModel.Channels.SocketConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   at System.ServiceModel.Channels.BufferedConnection.WriteNow(Byte[] buffer, Int32 offset, Int32 size, TimeSpan timeout, BufferManager bufferManager)   at System.ServiceModel.Channels.BufferedConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   at System.ServiceModel.Channels.ConnectionStream.Write(Byte[] buffer, Int32 offset, Int32 count)   at System.Net.Security.NegotiateStream.StartWriting(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest)   at System.Net.Security.NegotiateStream.ProcessWrite(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest)   --- End of inner exception stack trace ---   at System.Net.Security.NegotiateStream.ProcessWrite(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest)   at System.Net.Security.NegotiateStream.Write(Byte[] buffer, Int32 offset, Int32 count)   at System.ServiceModel.Channels.StreamConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   --- End of inner exception stack trace ---Server stack trace:    at System.ServiceModel.Channels.StreamConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout)   at System.ServiceModel.Channels.StreamConnection.Write(Byte[] buffer, Int32 offset, Int32 size, Boolean immediate, TimeSpan timeout, BufferManager bufferManager)   at System.ServiceModel.Channels.FramingDuplexSessionChannel.OnSendCore(Message message, TimeSpan timeout)   at System.ServiceModel.Channels.TransportDuplexSessionChannel.OnSend(Message message, TimeSpan timeout)   at System.ServiceModel.Channels.OutputChannel.Send(Message message, TimeSpan timeout)   at System.ServiceModel.Dispatcher.DuplexChannelBinder.Request(Message message, TimeSpan timeout)   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)Exception rethrown at [0]:    at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)   at Microsoft.Ceres.ContentEngine.Admin.FlowService.IFlowServiceManagementAgent.GetFlows()   at Microsoft.Exchange.Search.Fast.IndexManager.<GetFlows>b__16()   at Microsoft.Exchange.Search.Fast.IndexManagementClient.PerformFastOperation[T](Func`1 function, String eventLogKey)   --- End of inner exception stack trace ---</Data> </EventData></Event>
Log Name:      ApplicationSource:        MSExchange Mid-Tier StorageDate:          7/20/2014 7:53:49 PMEvent ID:      6002Task Category: ResourceHealthLevel:         WarningKeywords:      ClassicUser:          N/AComputer:      MRM2EX1.MRM2Inc.comDescription:Ping of mdb '7d98ce58-997c-41c1-abde-06d7eaf3dbdd' timed out after '00:00:00' minutes. Last successful ping was at '7/20/2014 11:53:49 PM' UTC.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System>    <Provider Name="MSExchange Mid-Tier Storage" />    <EventID Qualifiers="32768">6002</EventID>    <Level>3</Level>    <Task>6</Task>    <Keywords>0x80000000000000</Keywords>    <TimeCreated SystemTime="2014-07-20T23:53:49.000000000Z" />    <EventRecordID>703314</EventRecordID>    <Channel>Application</Channel>    <Computer>MRM2EX1.MRM2Inc.com</Computer>    <Security /> </System> <EventData>    <Data>7d98ce58-997c-41c1-abde-06d7eaf3dbdd</Data>    <Data>00:00:00</Data>    <Data>7/20/2014 11:53:49 PM</Data> </EventData></Event>
Log Name:      ApplicationSource:        MSExchange Mid-Tier StorageDate:          7/20/2014 7:58:39 PMEvent ID:      10010Task Category: ResourceHealthLevel:         WarningKeywords:      ClassicUser:          N/AComputer:      MRM2EX1.MRM2Inc.comDescription:Process: MSExchangeDelivery (2824), Db:a433e8a2-ca26-438e-a9a3-d71305c6c266,C:1,BT:00:00:00,Db:7d98ce58-997c-41c1-abde-06d7eaf3dbdd,C:1,BT:00:00:00,Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System>    <Provider Name="MSExchange Mid-Tier Storage" />    <EventID Qualifiers="32768">10010</EventID>    <Level>3</Level>    <Task>6</Task>    <Keywords>0x80000000000000</Keywords>    <TimeCreated SystemTime="2014-07-20T23:58:39.000000000Z" />    <EventRecordID>703327</EventRecordID>    <Channel>Application</Channel>    <Computer>MRM2EX1.MRM2Inc.com</Computer>    <Security /> </System> <EventData>    <Data>Process: MSExchangeDelivery (2824), Db:a433e8a2-ca26-438e-a9a3-d71305c6c266,C:1,BT:00:00:00,Db:7d98ce58-997c-41c1-abde-06d7eaf3dbdd,C:1,BT:00:00:00,</Data> </EventData></Event>
Michael R. Mastro II

Migration from Exchange 2007 to 2013 gives error "Failed to communicate with the mailbox database'

I have been trying to migrate several databases from Exchange 2007 to Exchange 2013. The migration started successfully, and many of the mailboxes moved successfully (about 70). The remaining mailboxes, failed. Looking deeper, we found a few issues; The
two 2013 Mailbox servers were on different versions. The Server had run out of disk space, and the NIC drivers needed to be updated.
Now when we try to migrate a mailbox that had failed in the earlier batch, we get the following error:
Data migrated:
Migration rate:
Error:
MigrationTransientException: Failed to communicate with the mailbox database. --> Failed to communicate with the mailbox database. --> MapiExceptionNetworkError: Unable to make connection to the server. ‎(hr=0x80040115, ec=-2147221227)‎ Diagnostic
context:    ......    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 501    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0    Lid: 11672   dwParam:
0x0 Msg: EEInfo: NumberOfParameters: 4    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[1]: Unicode string: <Server
FQDN>    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[2]: Long val: 3749909585    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[3]: Long val: 382312662    Lid: 45169   StoreEc: 0x824
Lid: 50544   ClientVersion: 15.0.847.32    Lid: 52080   StoreEc: 0x824         Lid: 44273      Lid: 49064   dwParam: 0x1    Lid: 37288
StoreEc: 0x6AB         Lid: 49064   dwParam: 0x2    Lid: 59431   EMSMDB.EcDoConnectEx called [length=203]    Lid: 51239   EMSMDB.EcDoConnectEx exception [rpc_status=0x6D9][latency=0]
Lid: 62184      Lid: 16280   dwParam: 0x0 Msg: EEInfo: ComputerName: n/a    Lid: 8600    dwParam: 0x0 Msg: EEInfo: ProcessID: 3460    Lid: 12696   dwParam: 0x0 Msg: EEInfo:
Generation Time: 0414-04-07T16:32:03.2100000Z    Lid: 10648   dwParam: 0x0 Msg: EEInfo: Generating component: 2    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 1753    Lid: 9624
dwParam: 0x0 Msg: EEInfo: Detection location: 501    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 4    Lid: 8856
dwParam: 0x0 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[1]: Unicode string: <Server FQDN>    Lid: 12952   dwParam: 0x0 Msg: EEInfo:
prm[2]: Long val: 2767313664    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[3]: Long val: 382312662    Lid: 59505   StoreEc: 0x824         Lid: 50544   ClientVersion:
15.0.847.32    Lid: 52080   StoreEc: 0x824         Lid: 36081      Lid: 51152      Lid: 52465   StoreEc: 0x80040115
Lid: 60065      Lid: 33777   StoreEc: 0x80040115    Lid: 59805      Lid: 52487   StoreEc: 0x80040115    Lid: 19778      Lid: 27970
StoreEc: 0x80040115    Lid: 17730      Lid: 25922   StoreEc: 0x80040115
All of the issues listed above have been corrected, and all of the databases are mounted. Users are able to send and receive mail, but I can not migrate mail using the Migration Batch utility.
The destination server is a Hyper-V Guest running Server 2012, SP1, and Exchange 2013
The Source Server is Running Exchange 2007.
I have tried doing a test move to another destination server that is also Server 2012, and Exchange 2013, and the migration also failed.
I would appreciate any help you can give me!
Thanks,
Jon

Any update if you have resolved the issue.
Not similar, but this thread can be helpful while you migrate the mailboxes from exchange 2007 to 2013. Please check :http://social.technet.microsoft.com/Forums/exchange/en-US/721f0ae4-623a-4b02-adaf-f561d86c0426/move-mailboxes-and-public-folders-from-exchange-2007-to-exchange-2013?forum=exchangesvrdeploy&prof=required

Mailbox Database Copy Status Failed

We have 2 Exchange 2010 servers. We run a DAG. Recently I have noticed that database copy DB2 which is located on Exch-1 is showing "Failed". Database copy DB1 which is located on Exch-2 is showing Healthy. I searched online
for information regarding the issue with the failed database copy. I found information that led me to run these commands.
Suspend-MailboxDatabaseCopy -Identity “Mailbox Database XXXXX\Server Name”
Update-MailboxDatabaseCopy -Identity “Mailbox Database XXXXX\Server Name” -DeleteExistingFiles
It went thru the seeding process and completed but the database copy still shows "Failed". Copy Q Length is 19. I have refreshed the console. What else do I need to do to correct this? I did recently shut down Exch-2 server
for maintenance. thanks

Hi,
It's glade to hear the good news. Thanks for your updating.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Fail to add mailbox database copy

Hello,
When I am trying to add a mailbox database copy in DAG, I receive the following error:
error
The seeding operation failed. Error: An error occurred while performing the seed operation. Error: Failed to notify source server 'mbx1.domain.local' about the local truncation point. Hresult: 0xc8000713. Error: Unable to find the file.
when viewing details of the passiv, error message shows:
The database file wasn't found after log replay. The copy will be set to failed
Please help. Thanks

Hi,
Please use the Get-MailboxDatabaseCopyStatus cmdlet to check the health and status of mailbox database copy.
Please dismount and remount the active mailbox database, remove the failed passive database copy and then add it again to check the result.
Besides, please check the application log to see if there is any related events.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange Connector - Update Mailbox Database Failed

Hi everyone,
OIM : 11g R2
Exchange : 11.1.1.6
I want to update "mailbox database" attribute of an exchange user.
I can make provisioning successfully.
When I update "Mailbox Database", "Database Updated " failed.
In log :
SEVERE: oracle.iam.connectors.icfcommon.prov.ICProvisioningManager : doUpdate : Error while updating user
java.lang.IllegalArgumentException: Update type [Database] not supported
    at org.identityconnectors.framework.impl.serializer.CommonObjectHandlers$14.createException(CommonObjectHandlers.java:274)
    at org.identityconnectors.framework.impl.serializer.CommonObjectHandlers$14.createException(CommonObjectHandlers.java:271)
    at org.identityconnectors.framework.impl.serializer.CommonObjectHandlers$ThrowableHandler.deserialize(CommonObjectHandlers.java:115)
    at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder$InternalDecoder.readObject(BinaryObjectDecoder.java:162)
    at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder.readObject(BinaryObjectDecoder.java:313)
    at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder.readObjectField(BinaryObjectDecoder.java:417)
    at org.identityconnectors.framework.impl.serializer.MessageHandlers$5.deserialize(MessageHandlers.java:155)
    at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder$InternalDecoder.readObject(BinaryObjectDecoder.java:162)
    at org.identityconnectors.framework.impl.serializer.binary.BinaryObjectDecoder.readObject(BinaryObjectDecoder.java:313)
    at org.identityconnectors.framework.impl.api.remote.RemoteFrameworkConnection.readObject(RemoteFrameworkConnection.java:153)
    at org.identityconnectors.framework.impl.api.remote.RemoteOperationInvocationHandler.invoke(RemoteOperationInvocationHandler.java:101)
    at $Proxy519.update(Unknown Source)
In Process Definition of Exchange User target resources, there is a "Database Updated" task.
If this task is exist, database must be updated.
Why I can not update mailbox database?
Thanks.
Best regards.

Thank you Alex. As I was firing up the shell to test this out I realized I was using the wrong account! Poor naming convention it seems =)
Appreciate the help.

Active Manager failed to mount database Mailbox Database?

So we had our stuff working fine with exchange 2010 rc and 08 r2 rtm... We installed antivirus on our server and now get the below message.... Everything "seems" to work though... We get two of these messages per reboot though... one with the main box database and one for the public folder one....
Again all seems to work okay, we have tried to remove AV but didnt fix.
Any suggestions?
Active Manager failed to mount database Mailbox Database 0539218550 on server main-server.hq.local. Error: An Active Manager operation failed with a transient error. Please retry the operation. Error A transient error occurred during discovery of the database availability group topology. Error: Database action failed with transient error. Error: A transient error occurred during a database operation. Error: MapiExceptionNetworkError: Unable to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:
Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation Time: 2009-09-04 16:40:25:54
Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating component: 2
Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753
Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location: 501
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string:
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 24060 StoreEc: 0x80040115
Lid: 23746
Lid: 31938 StoreEc: 0x80040115
Lid: 19650
Lid: 27842 StoreEc: 0x80040115
Lid: 20866
Lid: 29058 StoreEc: 0x80040115.

I get this as well - two exchange 2010 SP1 UR2 servers. they host all roles on each, non-dag members as of now. Every time I reboot either server I get the same thing. MSExchangeRepl 3154 Service
Log Name: Application
Source: MSExchangeRepl
Date: 1/3/2011 10:54:07 PM
Event ID: 3154
Task Category: Service
Level: Error
Keywords: Classic
User: N/A
Computer: mail.mydomain.com
Description:
Active Manager failed to mount database Exchange DB on server mail.mydomain.com. Error: An Active Manager operation failed with a transient error. Please retry the operation. Error: Database action failed with transient error. Error: A transient error
occurred during a database operation. Error: MapiExceptionNetworkError: Unable to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:
   Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation Time: 2011-01-04 03:54:07:310
   Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating component: 2
   Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753
   Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location: 501
   Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
   Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
   Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc
   Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string:
   Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
   Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
   Lid: 24060 StoreEc: 0x80040115
   Lid: 23746
   Lid: 31938 StoreEc: 0x80040115
   Lid: 19650
   Lid: 27842 StoreEc: 0x80040115
   Lid: 20866
   Lid: 29058 StoreEc: 0x80040115
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
   <Provider Name="MSExchangeRepl" />
   <EventID Qualifiers="49156">3154</EventID>
   <Level>2</Level>
   <Task>1</Task>
   <Keywords>0x80000000000000</Keywords>
   <TimeCreated SystemTime="2011-01-04T03:54:07.000000000Z" />
   <EventRecordID>8851</EventRecordID>
   <Channel>Application</Channel>
   <Computer>mail.mydomain.com</Computer>
   <Security />
  </System>
  <EventData>
   <Data>Exchange DB</Data>
   <Data>mail.mydomain.com</Data>
   <Data>An Active Manager operation failed with a transient error. Please retry the operation. Error: Database action failed with transient error. Error: A transient error occurred during a database operation. Error: MapiExceptionNetworkError:
Unable to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:
   Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation Time: 2011-01-04 03:54:07:310
   Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating component: 2
   Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753
   Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location: 501
   Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
   Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
   Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc
   Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string:
   Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
   Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
   Lid: 24060 StoreEc: 0x80040115
   Lid: 23746
   Lid: 31938 StoreEc: 0x80040115
   Lid: 19650
   Lid: 27842 StoreEc: 0x80040115
   Lid: 20866
   Lid: 29058 StoreEc: 0x80040115</Data>
  </EventData>
</Event>
Log Name: Application
Source: MSExchangeRepl
Date: 1/3/2011 10:54:06 PM
Event ID: 3154
Task Category: Service
Level: Error
Keywords: Classic
User: N/A
Computer: mail.mydomain.com
Description:
Active Manager failed to mount database Public on server mail.mydomain.com. Error: An Active Manager operation failed with a transient error. Please retry the operation. Error: Database action failed with transient error. Error: A transient error occurred
during a database operation. Error: MapiExceptionNetworkError: Unable to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:
   Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation Time: 2011-01-04 03:54:05:732
   Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating component: 2
   Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753
   Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location: 501
   Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
   Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
   Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc
   Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string:
   Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
   Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
   Lid: 24060 StoreEc: 0x80040115
   Lid: 23746
   Lid: 31938 StoreEc: 0x80040115
   Lid: 19650
   Lid: 27842 StoreEc: 0x80040115
   Lid: 20866
   Lid: 29058 StoreEc: 0x80040115
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
   <Provider Name="MSExchangeRepl" />
   <EventID Qualifiers="49156">3154</EventID>
   <Level>2</Level>
   <Task>1</Task>
   <Keywords>0x80000000000000</Keywords>
   <TimeCreated SystemTime="2011-01-04T03:54:06.000000000Z" />
   <EventRecordID>8850</EventRecordID>
   <Channel>Application</Channel>
   <Computer>Gmail.mydomain.com</Computer>
   <Security />
  </System>
  <EventData>
   <Data>Public</Data>
   <Data>mail.mydomain.com</Data>
   <Data>An Active Manager operation failed with a transient error. Please retry the operation. Error: Database action failed with transient error. Error: A transient error occurred during a database operation. Error: MapiExceptionNetworkError:
Unable to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:
   Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation Time: 2011-01-04 03:54:05:732
   Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating component: 2
   Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753
   Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location: 501
   Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
   Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
   Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc
   Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string:
   Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
   Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
   Lid: 24060 StoreEc: 0x80040115
   Lid: 23746
   Lid: 31938 StoreEc: 0x80040115
   Lid: 19650
   Lid: 27842 StoreEc: 0x80040115
   Lid: 20866
   Lid: 29058 StoreEc: 0x80040115</Data>
  </EventData>
</Event>

Load balancing failed to find a valid mailbox database.

While trying to create new mailbox, the following message is displayed:
"Load balancing failed to find a valid mailbox database."
If database is manually selected, there are no problems.
I've checked this:
Get-mailboxdatabase | ft name,isexcludedfromprovisioning
Name
IsExcludedFromProvisioning
MAILBOX01
False
MAILBOX02
False
MAILBOX03
False
MAILBOX04
False
Get-MailboxDatabase –Status | FT Name, Mounted
Name
Mounted
MAILBOX01
True
MAILBOX02
True
MAILBOX03
True
MAILBOX04
True

Willard Martin:
Get-mailboxdatabase | ft name,issuspendedfromprovisioning
Name
IsSuspendedFromProvisioning
MAILBOX01
False
MAILBOX02
False
MAILBOX03
False
MAILBOX04
False
PK M:
This is Output for: Get-ManagementRoleAssignment -RoleAssignee <UserCreatingMailboxes>
Name                           Role              RoleAssigneeName
RoleAssigneeType AssignmentMethod EffectiveUserNam
e
View-Only Configuration-Org... View-Only Conf... Organization M... RoleGroup         RoleGroup         All Group Mem...
UnScoped Role Management-Or... UnScoped Role ... Organization M... RoleGroup         RoleGroup         All Group Mem...
MyDiagnostics-Organization ... MyDiagnostics     Organization M... RoleGroup         RoleGroup         All Group Mem...
Cmdlet Extension Agents-Org... Cmdlet Extensi... Organization M... RoleGroup         RoleGroup         All Group Mem...
Exchange Server Certificate... Exchange Serve... Organization M... RoleGroup         RoleGroup         All Group Mem...
Mail Recipients-Organizatio... Mail Recipients   Organization M... RoleGroup         RoleGroup         All Group Mem...
Mail Recipient Creation-Org... Mail Recipient... Organization M... RoleGroup         RoleGroup         All Group Mem...
MyTextMessaging-Organizatio... MyTextMessaging   Organization M... RoleGroup         RoleGroup         All Group Mem...
Exchange Connectors-Organiz... Exchange Conne... Organization M... RoleGroup         RoleGroup         All Group Mem...
Organization Client Access-... Organization C... Organization M... RoleGroup         RoleGroup         All Group Mem...
Mail Recipient Creation-Org... Mail Recipient... Organization M... RoleGroup         RoleGroup         All Group Mem...
MyProfileInformation-Organi... MyProfileInfor... Organization M... RoleGroup         RoleGroup         All Group Mem...
Exchange Servers-Organizati... Exchange Servers Organization M... RoleGroup         RoleGroup         All Group Mem...
Edge Subscriptions-Organiza... Edge Subscript... Organization M... RoleGroup         RoleGroup         All Group Mem...
User Options-Organization M... User Options      Organization M... RoleGroup         RoleGroup         All Group Mem...
Audit Logs-Organization Man... Audit Logs        Organization M... RoleGroup         RoleGroup         All Group Mem...
Database Copies-Organizatio... Database Copies   Organization M... RoleGroup         RoleGroup         All Group Mem...
View-Only Configuration-Org... View-Only Conf... Organization M... RoleGroup         RoleGroup         All Group Mem...
Message Tracking-Organizati... Message Tracking Organization M... RoleGroup         RoleGroup         All Group Mem...
Migration-Organization Mana... Migration         Organization M... RoleGroup         RoleGroup         All Group Mem...
Move Mailboxes-Organization... Move Mailboxes    Organization M... RoleGroup         RoleGroup         All Group Mem...
Move Mailboxes-Organization... Move Mailboxes    Organization M... RoleGroup         RoleGroup         All Group Mem...
Exchange Server Certificate... Exchange Serve... Organization M... RoleGroup         RoleGroup         All Group Mem...
Migration-Organization Mana... Migration         Organization M... RoleGroup         RoleGroup         All Group Mem...
View-Only Recipients-Organi... View-Only Reci... Organization M... RoleGroup         RoleGroup         All Group Mem...
Database Availability Group... Database Avail... Organization M... RoleGroup         RoleGroup         All Group Mem...
Database Copies-Organizatio... Database Copies   Organization M... RoleGroup         RoleGroup         All Group Mem...
Monitoring-Organization Man... Monitoring        Organization M... RoleGroup         RoleGroup         All Group Mem...
View-Only Audit Logs-Organi... View-Only Audi... Organization M... RoleGroup         RoleGroup         All Group Mem...
Transport Agents-Organizati... Transport Agents Organization M... RoleGroup         RoleGroup         All Group Mem...
Support Diagnostics-Organiz... Support Diagno... Organization M... RoleGroup         RoleGroup         All Group Mem...
Transport Hygiene-Organizat... Transport Hygiene Organization M... RoleGroup         RoleGroup         All Group Mem...
Transport Rules-Organizatio... Transport Rules   Organization M... RoleGroup         RoleGroup         All Group Mem...
Remote and Accepted Domains... Remote and Acc... Organization M... RoleGroup         RoleGroup         All Group Mem...
Address Lists-Organization ... Address Lists     Organization M... RoleGroup         RoleGroup         All Group Mem...
Message Tracking-Organizati... Message Tracking Organization M... RoleGroup         RoleGroup         All Group Mem...
Role Management-Organizatio... Role Management   Organization M... RoleGroup         RoleGroup         All Group Mem...
Information Rights Manageme... Information Ri... Organization M... RoleGroup         RoleGroup         All Group Mem...
Legal Hold-Organization Man... Legal Hold        Organization M... RoleGroup         RoleGroup         All Group Mem...
POP3 And IMAP4 Protocols-Or... POP3 And IMAP4... Organization M... RoleGroup         RoleGroup         All Group Mem...
Retention Management-Organi... Retention Mana... Organization M... RoleGroup         RoleGroup         All Group Mem...
Send Connectors-Organizatio... Send Connectors   Organization M... RoleGroup         RoleGroup         All Group Mem...
MyDistributionGroups-Organi... MyDistribution... Organization M... RoleGroup         RoleGroup         All Group Mem...
Remote and Accepted Domains... Remote and Acc... Organization M... RoleGroup         RoleGroup         All Group Mem..
Exchange Virtual Directorie... Exchange Virtu... Organization M... RoleGroup         RoleGroup         All Group Mem..
Database Availability Group... Database Avail... Organization M... RoleGroup         RoleGroup         All Group Mem..
Mail Tips-Organization Mana... Mail Tips         Organization M... RoleGroup         RoleGroup         All Group Mem..
Security Group Creation and... Security Group... Organization M... RoleGroup         RoleGroup         All Group Mem..
Mail Enabled Public Folders... Mail Enabled P... Organization M... RoleGroup         RoleGroup         All Group Mem..
E-Mail Address Policies-Org... E-Mail Address... Organization M... RoleGroup         RoleGroup         All Group Mem..
Public Folder Replication-O... Public Folder ... Organization M... RoleGroup         RoleGroup         All Group Mem..
Monitoring-Organization Man... Monitoring        Organization M... RoleGroup         RoleGroup         All Group Mem..
Unified Messaging-Organizat... Unified Messaging Organization M... RoleGroup         RoleGroup         All Group Mem..
Public Folders-Organization... Public Folders    Organization M... RoleGroup         RoleGroup         All Group Mem..
Recipient Policies-Organiza... Recipient Poli... Organization M... RoleGroup         RoleGroup         All Group Mem..
Federated Sharing-Organizat... Federated Sharing Organization M... RoleGroup         RoleGroup         All Group Mem..
User Options-Organization M... User Options      Organization M... RoleGroup         RoleGroup         All Group Mem..
Exchange Connectors-Organiz... Exchange Conne... Organization M... RoleGroup         RoleGroup         All Group Mem..
Retention Management-Organi... Retention Mana... Organization M... RoleGroup         RoleGroup         All Group Mem..
Journaling-Organization Man... Journaling        Organization M... RoleGroup         RoleGroup         All Group Mem..
Transport Rules-Organizatio... Transport Rules   Organization M... RoleGroup         RoleGroup         All Group Mem..
Organization Transport Sett... Organization T... Organization M... RoleGroup         RoleGroup         All Group Mem..
Public Folders-Organization... Public Folders    Organization M... RoleGroup         RoleGroup         All Group Mem..
Unified Messaging-Organizat... Unified Messaging Organization M... RoleGroup         RoleGroup         All Group Mem..
View-Only Recipients-Organi... View-Only Reci... Organization M... RoleGroup         RoleGroup         All Group Mem..
Journaling-Organization Man... Journaling        Organization M... RoleGroup         RoleGroup         All Group Mem..
Mail Tips-Organization Mana... Mail Tips         Organization M... RoleGroup         RoleGroup         All Group Mem..
Mail Recipients-Organizatio... Mail Recipients   Organization M... RoleGroup         RoleGroup         All Group Mem..
Audit Logs-Organization Man... Audit Logs        Organization M... RoleGroup         RoleGroup         All Group Mem..
Transport Queues-Organizati... Transport Queues Organization M... RoleGroup         RoleGroup         All Group Mem..
Recipient Policies-Organiza... Recipient Poli... Organization M... RoleGroup         RoleGroup         All Group Mem..
Disaster Recovery-Organizat... Disaster Recovery Organization M... RoleGroup         RoleGroup         All Group Mem..
POP3 And IMAP4 Protocols-Or... POP3 And IMAP4... Organization M... RoleGroup         RoleGroup         All Group Mem..
Organization Configuration-... Organization C... Organization M... RoleGroup         RoleGroup         All Group Mem..
MyBaseOptions-Organization ... MyBaseOptions     Organization M... RoleGroup         RoleGroup         All Group Mem..
Transport Agents-Organizati... Transport Agents Organization M... RoleGroup         RoleGroup         All Group Mem..
View-Only Audit Logs-Organi... View-Only Audi... Organization M... RoleGroup         RoleGroup         All Group Mem..
Legal Hold-Organization Man... Legal Hold        Organization M... RoleGroup         RoleGroup         All Group Mem..
Send Connectors-Organizatio... Send Connectors   Organization M... RoleGroup         RoleGroup         All Group Mem..
Transport Queues-Organizati... Transport Queues Organization M... RoleGroup         RoleGroup         All Group Mem..
E-Mail Address Policies-Org... E-Mail Address... Organization M... RoleGroup         RoleGroup         All Group Mem..
Active Directory Permission... Active Directo... Organization M... RoleGroup         RoleGroup         All Group Mem..
ApplicationImpersonation-Or... ApplicationImp... Organization M... RoleGroup         RoleGroup         All Group Mem..
Address Lists-Organization ... Address Lists     Organization M... RoleGroup         RoleGroup         All Group Mem..
Federated Sharing-Organizat... Federated Sharing Organization M... RoleGroup         RoleGroup         All Group Mem..
Databases-Organization Mana... Databases         Organization M... RoleGroup         RoleGroup         All Group Mem..
Exchange Servers-Organizati... Exchange Servers Organization M... RoleGroup         RoleGroup         All Group Mem..
UM Mailboxes-Organization M... UM Mailboxes      Organization M... RoleGroup         RoleGroup         All Group Mem..
Active Directory Permission... Active Directo... Organization M... RoleGroup         RoleGroup         All Group Mem..
UM Mailboxes-Organization M... UM Mailboxes      Organization M... RoleGroup         RoleGroup         All Group Mem..
Distribution Groups-Organiz... Distribution G... Organization M... RoleGroup         RoleGroup         All Group Mem..
Organization Configuration-... Organization C... Organization M... RoleGroup         RoleGroup         All Group Mem..
MyContactInformation-Organi... MyContactInfor... Organization M... RoleGroup         RoleGroup         All Group Mem..
Mailbox Search-Organization... Mailbox Search    Organization M... RoleGroup         RoleGroup         All Group Mem..
Edge Subscriptions-Organiza... Edge Subscript... Organization M... RoleGroup         RoleGroup         All Group Mem..
MyDistributionGroupMembersh... MyDistribution... Organization M... RoleGroup         RoleGroup         All Group Mem..
Information Rights Manageme... Information Ri... Organization M... RoleGroup         RoleGroup         All Group Mem..
Mailbox Import Export-Organ... Mailbox Import... Organization M... RoleGroup         RoleGroup         All Group Mem..
Security Group Creation and... Security Group... Organization M... RoleGroup         RoleGroup         All Group Mem..
Mail Enabled Public Folders... Mail Enabled P... Organization M... RoleGroup         RoleGroup         All Group Mem..
Distribution Groups-Organiz... Distribution G... Organization M... RoleGroup         RoleGroup         All Group Mem..
Organization Client Access-... Organization C... Organization M... RoleGroup         RoleGroup         All Group Mem..
Role Management-Organizatio... Role Management   Organization M... RoleGroup         RoleGroup         All Group Mem..
UM Prompts-Organization Man... UM Prompts        Organization M... RoleGroup         RoleGroup         All Group Mem..
Cmdlet Extension Agents-Org... Cmdlet Extensi... Organization M... RoleGroup         RoleGroup         All Group Mem..
Public Folder Replication-O... Public Folder ... Organization M... RoleGroup         RoleGroup         All Group Mem..
Receive Connectors-Organiza... Receive Connec... Organization M... RoleGroup         RoleGroup         All Group Mem..
UM Prompts-Organization Man... UM Prompts        Organization M... RoleGroup         RoleGroup         All Group Mem..
MyRetentionPolicies-Organiz... MyRetentionPol... Organization M... RoleGroup         RoleGroup         All Group Mem..
Databases-Organization Mana... Databases         Organization M... RoleGroup         RoleGroup         All Group Mem..
Organization Transport Sett... Organization T... Organization M... RoleGroup         RoleGroup         All Group Mem..
Disaster Recovery-Organizat... Disaster Recovery Organization M... RoleGroup         RoleGroup         All Group Mem..
Receive Connectors-Organiza... Receive Connec... Organization M... RoleGroup         RoleGroup         All Group Mem..
MyVoiceMail-Organization Ma... MyVoiceMail       Organization M... RoleGroup         RoleGroup         All Group Mem..
Transport Hygiene-Organizat... Transport Hygiene Organization M... RoleGroup         RoleGroup         All Group Mem..
Exchange Virtual Directorie... Exchange Virtu... Organization M... RoleGroup         RoleGroup         All Group Mem..
MyMailboxDelegation-Organiz... MyMailboxDeleg... Organization M... RoleGroup         RoleGroup         All Group Mem..
Mail Enabled Public Folders... Mail Enabled P... Recipient Mana... RoleGroup         RoleGroup         All Group Mem..
Recipient Policies-Recipien... Recipient Poli... Recipient Mana... RoleGroup         RoleGroup         All Group Mem..
Distribution Groups-Recipie... Distribution G... Recipient Mana... RoleGroup         RoleGroup         All Group Mem..
Message Tracking-Recipient ... Message Tracking Recipient Mana... RoleGroup         RoleGroup         All Group Mem..
Mail Recipient Creation-Rec... Mail Recipient... Recipient Mana... RoleGroup         RoleGroup         All Group Mem..
Migration-Recipient Management Migration         Recipient Mana... RoleGroup         RoleGroup         All Group Mem..
Move Mailboxes-Recipient Ma... Move Mailboxes    Recipient Mana... RoleGroup         RoleGroup         All Group Mem..
Mail Recipients-Recipient M... Mail Recipients   Recipient Mana... RoleGroup         RoleGroup         All Group Mem..
Monitoring-View-Only Organi... Monitoring        View-Only Orga... RoleGroup         RoleGroup         All Group Mem..
View-Only Configuration-Vie... View-Only Conf... View-Only Orga... RoleGroup         RoleGroup         All Group Mem..
View-Only Recipients-View-O... View-Only Reci... View-Only Orga... RoleGroup         RoleGroup         All Group Mem..
Public Folders-Public Folde... Public Folders    Public Folder ... RoleGroup         RoleGroup         All Group Mem..
Mail Enabled Public Folders... Mail Enabled P... Public Folder ... RoleGroup         RoleGroup         All Group Mem..
MyDistributionGroupMembersh... MyDistribution... Default Role A... RoleAssignment... RoleAssignment... All Policy As..
MyTextMessaging-Default Rol... MyTextMessaging   Default Role A... RoleAssignment... RoleAssignment... All Policy As..
MyContactInformation-Defaul... MyContactInfor... Default Role A... RoleAssignment... RoleAssignment... All Policy As..
MyVoiceMail-Default Role As... MyVoiceMail       Default Role A... RoleAssignment... RoleAssignment... All Policy As..
MyBaseOptions-Default Role ... MyBaseOptions     Default Role A... RoleAssignment... RoleAssignment... All Policy As..
I've tested functionality with other admin-accounts and they have the same roles and same behavior. There have been no changes in roles or other Exchange settings as far as I know.

Removing mailbox databases

Hello!
I'm getting this warning when removing a mailbox database in Exchnage 2013 SP1:
I've never had it in Exchange 2013 (NOT SP1)... How can I now remove a "monitoring mailbox object of database ..." from my AD?
Thank you in advance,
Michael

Hi
Here you go
Failed to remove monitoring mailbox object of database “database_name”. Exception: Active directory operation failed on “server_name”. This error is not retrievable. Additional information: Access is
denied. Active directory response: 000000005: SecErr: DSID-031520B2, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0.
In this case, the database was removed an Active Directory [AD] error (with a not very useful description) complaining about insufficient permissions is thrown. If you run:
Get-Mailbox -Monitoring
You will most likely see a warning regarding a corrupted Health Mailbox:
WARNING: The object “domain_name”/Microsoft Exchange System Objects/Monitoring Mailboxes/”Health_Mailbox_GUID” has been corrupted, and it's in an inconsistent state. The following validation errors happened:
WARNING: Database is mandatory or UserMailbox.
Because Exchange 2013 did not have sufficient permissions to the domainname/Microsoft Exchange System Objects/Monitoring Mailboxes Organizational Unit [OU], it could not delete the AD objects related to the database’s health mailboxes. In
this case, the database attribute is null because the database the health mailbox references no longer exists.
To fix this issue, simply delete the health mailboxes referenced by the error(s) from that OU by using Active Directory Users and Computers. After removing these, the warning should be gone.
Deleting health mailboxes is a low risk procedure because they will be automatically re-created by the Microsoft Exchange Health Manager service on the Exchange 2013 server hosting the database when this service is restarted
Source of information - http://www.msexchange.org/kbase/ExchangeServerTips/ExchangeServer2013/ManagementAdministration/exchange-2013-error-deleting-database.html
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Power outage Mailbox Database won't mount

Hello,
We have experienced a power outage, when we brought the server back the Mailbox Database wouldn't mount.
After that i ran Eseutil /mh and was on dirty shutdown, the i did /r and finally /p
Database is now on Clean shutdown state but still doesn't mount, error in event viewer:
failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-344) ---> Microsoft.Exchange.Data.Storage.AmOperationFailedException: An Active Manager operation failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-344) ---> Microsoft.Mapi.MapiExceptionCallFailed: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-344)
First time dealing with this problem, have i missed something?

I'm still unable to mount the Database, i've moved the logs out of the path and tried to mount with the same error.
the output of eseutil /mh
PS E:\Mailbox Database moved> eseutil /mh '.\Mailbox Database 1773415643.edb'
Extensible Storage Engine Utilities for Microsoft(R) Exchange Server
Version 14.00
Copyright (C) Microsoft Corporation. All Rights Reserved.
Initiating FILE DUMP mode...
Database: .\Mailbox Database 1773415643.edb
DATABASE HEADER:
Checksum Information:
Expected Checksum: 0x0122201a
Actual Checksum: 0x0122201a
Fields:
File Type: Database
Checksum: 0x122201a
Format ulMagic: 0x89abcdef
Engine ulMagic: 0x89abcdef
Format ulVersion: 0x620,17
Engine ulVersion: 0x620,17
Created ulVersion: 0x620,17
DB Signature: Create time:11/10/2012 19:14:18 Rand:1372720 Computer:
cbDbPage: 32768
dbtime: 279606 (0x44436)
State: Clean Shutdown
Log Required: 0-0 (0x0-0x0)
Log Committed: 0-0 (0x0-0x0)
Log Recovering: 0 (0x0)
GenMax Creation: 00/00/1900 00:00:00
Shadowed: Yes
Last Objid: 1
Scrub Dbtime: 0 (0x0)
Scrub Date: 00/00/1900 00:00:00
Repair Count: 2
Repair Date: 11/10/2012 19:14:18
Old Repair Count: 0
Last Consistent: (0x2,8,4D) 11/10/2012 20:51:35
Last Attach: (0x1,9,6C) 11/10/2012 20:51:35
Last Detach: (0x2,8,4D) 11/10/2012 20:51:35
Dbid: 1
Log Signature: Create time:11/10/2012 20:51:35 Rand:7225210 Computer:
OS Version: (6.0.6002 SP 2 NLS 500100.50100)
Previous Full Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
Previous Incremental Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
Previous Copy Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
Previous Differential Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
Current Full Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
Current Shadow copy backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
cpgUpgrade55Format: 0
cpgUpgradeFreePages: 0
cpgUpgradeSpaceMapPages: 0
ECC Fix Success Count: found (15)
Last ECC Fix Success Date: 11/10/2012 19:30:10
Old ECC Fix Success Count: found (11)
ECC Fix Error Count: none
Old ECC Fix Error Count: none
Bad Checksum Error Count: found (620)
Last Bad Checksum Error Date: 11/10/2012 19:32:24
Old bad Checksum Error Count: found (518)
Last checksum finish Date: 00/00/1900 00:00:00
Current checksum start Date: 00/00/1900 00:00:00
Current checksum page: 0
Operation completed successfully in 2.277 seconds.

EAC loses connect to Mailbox Database Server

I am having a weird issue with EAC. We have 2 mailbox databases but only 1 is used as the main production, on a separate server. The other database was the first one in the implementation. It hosts system attendant and a couple of administrative
accounts. This mailbox database was dismouting so I ran eseutil and it showed a dirty shutdown state. I ran the log file sequence which checked out fine. I completed a soft repair using /r option. After this the database was in a clean
shutdown state. I rebooted the server and the database mounted successfully.
The odd issues is that EAC will lose connection to this mailbox database and show in an Unknown Status showing 1 failed copy. However, if I check that server the mailbox database shows mounted and healthy. After a while it will remount.
When double clicking on the database name it says the information store isn't running but it is running on that server.
Even though this isn't the main production server for the users we have noticed that outlook will disconnect for users. Only after restarting services on the CAS (Separate server) will services return to healthy. I have scowered the event logs
and find hardly any information that relates to the issue.
The only error I see but have found almost no information on is MSExchange Mid-Tier Storage Ping of mdb 'e7304e5c-37f5-4fb4-8e6a-02f4426f0820' timed out after '00:00:00' minutes. Last successful ping was at '2/28/2014 2:39:55 PM' UTC.
I almost think its an issue with the CAS server hosting EAC. Maybe an IIS issue? However I can't find any errors on this server related to it. Any help would be appreciated.

Hi,
I would like to clarify the following things for troubleshooting:
1. Please run IISReset from command prompt at first.
2. What's more, I recommend you run the Get-MailboxDatabase "xxx" cmdlet and check the result.
Besides, please confirm that if there is any user reporting any Outlook/Exchange usage problem.
Hope my clarification is helpful.
If you need further assistance, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

CAS restart and Mailbox database dismount unexpectedly somtimes

Hi all,
In my environment I have 2 Exchange server 2013 (CAS + Mailbox Role both) CU2 : EX01 & EX02 in DAG01. Sometimes CAS service is restarted or Mailbox Database copy on Exchange servers is dismounted unexpectedly. For example today:
I have "Mailbox Database 01" copies on EX01 & EX02
Get-MailboxDatabaseCopyStatus "Mailbox Database 01"
Name Status
Mailbox Database 01\EX01 Healthy
Mailbox Database 01\EX02 Mounted
"Mailbox Database 01" copy on EX02 is dismounted, of course the other copy on EX01 is mounted automatically
Log Name:      Application
Source:        MSExchangeRepl
Date:          4/3/2015 2:32:19 PM
Event ID:      2153
Task Category: Service
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      EX02.mydomain.com
Description:
The log copier was unable to communicate with server 'EX01.mydomain.com'. The copy of database 'Mailbox Database 01\EX02' is in a disconnected state. The communication error was: An error occurred while communicating with server 'EX01'. Error: Unable to read data from the transport connection: An established connection was aborted by the software in your host machine. The copier will automatically retry after a short delay.
CAS service on EX01 , The Microsoft Exchange Mailbox Assistants service on EX02 are restarted
Log Name: System
Source: Service Control Manager
Date: 4/3/2015 3:25:49 PM
Event ID: 7031
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: EX01.mydomain.com
Description:
The Microsoft Exchange RPC Client Access service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Log Name: System
Source: Service Control Manager
Date: 4/3/2015 3:25:51 PM
Event ID: 7036
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: EX01.mydomain.com
Description:
The Microsoft Exchange RPC Client Access service entered the running state.
Log Name: System
Source: Service Control Manager
Date: 4/3/2015 3:25:54 PM
Event ID: 7032
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: EX01.mydomain.com
Description:
The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Microsoft Exchange RPC Client Access service, but this action failed with the following error:
An instance of the service is already running.
Log Name: System
Source: Service Control Manager
Date: 4/3/2015 3:30:28 PM
Event ID: 7031
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: EX02.mydomain.com
Description:
The Microsoft Exchange Mailbox Assistants service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Log Name: System
Source: Service Control Manager
Date: 4/3/2015 3:30:30 PM
Event ID: 7036
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: EX02.mydomain.com
Description:
The Microsoft Exchange Mailbox Assistants service entered the running state.
Log Name: System
Source: Service Control Manager
Date: 4/3/2015 3:30:33 PM
Event ID: 7032
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: EX02.mydomain.com
Description:
The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Microsoft Exchange Mailbox Assistants service, but this action failed with the following error:
An instance of the service is already running.
On EX01 I can see many 1309 , 2009 , 6002 , 4999 in Event Viewer on both servers, and they just used half of RAM
I'm going to upgrade to SP1 this weekend but please help me to figure out really reason of this issue, limit of max connections on Exchange/Window server , or Disk IO or something ?
Thanks for your help.

Last night I tried reseed Mailbox Database 01\EX02 , about 8:15 PM
I checked event viewer, last 2153 event happened on 7:49 PM, check around :
Get-MailboxDatabaseCopyStatus -Server ex02 | fl name,*incoming*,*outgoing*
Name : Mailbox Database 07\EX02
IncomingLogCopyingNetwork :
OutgoingConnections : {}
Name : Mailbox Database 01\EX02
IncomingLogCopyingNetwork : {EX01,ReplicationDagNetwork01,An error occurred while communicating with server
'EX01'. Error: Unable to write data to the transport connection: An established
connection was aborted by the software in your host machine.}
OutgoingConnections :
Name : Mailbox Database 99\EX02
IncomingLogCopyingNetwork :
OutgoingConnections : {}
Get-MailboxDatabaseCopyStatus -Server ex01 | fl name,*incoming*,*outgoing*
Name : Mailbox Database 01\EX01
IncomingLogCopyingNetwork :
OutgoingConnections : {}
Name : Mailbox Database 99\EX01
IncomingLogCopyingNetwork : {EX02,ReplicationDagNetwork01}
OutgoingConnections :
Name : Mailbox Database 07\EX01
IncomingLogCopyingNetwork : {EX02,ReplicationDagNetwork01}
OutgoingConnections :
Then I suspend and update Mailbox Database 01\EX02
Suspend-MailboxDatabaseCopy -Identity "Mailbox Database 01\EX02"
Update-MailboxDatabaseCopy -Identity "Mailbox Database 01\EX02" -Network "DAG01\ReplicationDagNetwork01"
Confirm
Are you sure you want to perform this action?
Seeding database copy "Mailbox Database 01\EX02".
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"):
The seeding operation failed. Error: An error occurred while running prerequisite checks. Error: Log files exist in
'D:\Exchange Mailbox Database\Mailbox Database 01'. You must remove them before database seeding or reseeding can be
performed. You can use the Update-MailboxDatabaseCopy cmdlet with the -DeleteExistingFiles or -SafeDeleteExistingFiles
parameter to do this. [Database: Mailbox Database 01, Server: EX02.mydomain.com]
+ CategoryInfo : InvalidOperation: (Mailbox Database 01:String) [Update-MailboxDatabaseCopy], SeedPrepare
Exception
+ FullyQualifiedErrorId : [Server=EX02,RequestId=56f71c07-6209-4aae-94cb-bf3cfc0a38fd,TimeStamp=4/22/2015 1:0
5:56 PM] [FailureCategory=Cmdlet-SeedPrepareException] 5F5B4C53,Microsoft.Exchange.Management.SystemConfigurationT
asks.UpdateDatabaseCopy
+ PSComputerName : ex02.mydomain.com
I want they use DAG01\ReplicationDagNetwork01 (1Gbps) for reseeding database, then I tried to add -SafeDeleteExistingFiles
Update-MailboxDatabaseCopy -Identity "Mailbox Database 01\EX02" -Network "DAG01\ReplicationDagNetwork01" -SafeDeleteExistingFiles
Confirm
Are you sure you want to perform this action?
Seeding database copy "Mailbox Database 01\EX02".
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"):
The seeding operation failed. Error: An error occurred while running prerequisite checks. Error: An error occurred
when trying to run the database redundancy validation checks for database 'Mailbox Database 01' due to
'SafeDeleteExistingFiles' being specified. Error: There were database redundancy check failures for database 'Mailbox
Database 01' that may be lowering its redundancy and putting the database at risk of data loss. Redundancy Count: 1.
Expected Redundancy Count: 2. Detailed error(s):
ex02:
Database 'Mailbox Database 01' does not have enough copies configured to meet the validation criteria.
[Database: Mailbox Database 01, Server: EX02.mydomain.com]
+ CategoryInfo : InvalidOperation: (Mailbox Database 01:String) [Update-MailboxDatabaseCopy], SeedPrepare
Exception
+ FullyQualifiedErrorId : [Server=EX02,RequestId=48374aa6-1198-4976-a435-3eb034dc5b58,TimeStamp=4/22/2015 1:0
8:44 PM] [FailureCategory=Cmdlet-SeedPrepareException] 458ED9A2,Microsoft.Exchange.Management.SystemConfigurationT
asks.UpdateDatabaseCopy
+ PSComputerName : ex02.mydomain.com
I think I should stop here, search more about -DeleteExistingFiles before continue. So I Resume-MailboxDatabaseCopy "Mailbox Database 01\EX02"
Everything is fine, I checked again
[PS] C:\Windows\system32>Get-MailboxDatabaseCopyStatus -Server ex02 | fl name,*incoming*,*outgoing*
Name : Mailbox Database 07\EX02
IncomingLogCopyingNetwork :
OutgoingConnections : {}
Name : Mailbox Database 01\EX02
IncomingLogCopyingNetwork : {EX01,ReplicationDagNetwork01}
OutgoingConnections :
Name : Mailbox Database 99\EX02
IncomingLogCopyingNetwork :
OutgoingConnections : {}
[PS] C:\Windows\system32>Get-MailboxDatabaseCopyStatus -Server ex01 | fl name,*incoming*,*outgoing*
Name : Mailbox Database 01\EX01
IncomingLogCopyingNetwork :
OutgoingConnections : {}
Name : Mailbox Database 99\EX01
IncomingLogCopyingNetwork : {EX02,ReplicationDagNetwork01}
OutgoingConnections :
Name : Mailbox Database 07\EX01
IncomingLogCopyingNetwork : {EX02,ReplicationDagNetwork01}
OutgoingConnections
What is going on :) ? IncomingLogCopyingNetwork for Mailbox Database 01\EX02 is fine :) til mid night
This morning I view events on EX02 and event 2153 appears again on 7:30 AM , I run command et-MailboxDatabaseCopyStatus again
Get-MailboxDatabaseCopyStatus -Server ex02 | fl name,*incoming*,*outgoing*
Name : Mailbox Database 07\EX02
IncomingLogCopyingNetwork :
OutgoingConnections : {}
Name : Mailbox Database 01\EX02
IncomingLogCopyingNetwork : {EX01,ReplicationDagNetwork01,An error occurred while communicating with server
'EX01'. Error: Unable to write data to the transport connection: An established
connection was aborted by the software in your host machine.}
OutgoingConnections :
Name : Mailbox Database 99\EX02
IncomingLogCopyingNetwork :
OutgoingConnections : {}
Get-MailboxDatabaseCopyStatus -Server ex01 | fl name,*incoming*,*outgoing*
Name : Mailbox Database 01\EX01
IncomingLogCopyingNetwork :
OutgoingConnections : {}
Name : Mailbox Database 99\EX01
IncomingLogCopyingNetwork : {EX02,ReplicationDagNetwork01}
OutgoingConnections :
Name : Mailbox Database 07\EX01
IncomingLogCopyingNetwork : {EX02,ReplicationDagNetwork01}
OutgoingConnections :
Any suggest ?

Mailbox database contentindex state is failed

Similar Messages

Maybe you are looking for