Mailbox Export from Windows 7 Machine Not Working

Good Morning All
We are running Exchange 2007 SP3 on a Windows 2003 R2 server. From my Windows XP machine I am able to use the export-mailbox command without issue. From my Windows 7 machine I am unable to run this command at all and receive this error "Cannot
open the log file 'C:\Program Files\Microsoft\Exchange Server\Logging\MigrationLogs\export-Mailbox20140404-101249-2436620.log'."
Is it possible to use the export-mailbox command from a 64bit Windows 7 machine?

How sure about that are you?
http://blogs.technet.com/b/exchange/archive/2007/04/13/3401913.aspx
I'm not installing a x86 Win 7 VM to test, so let's see what the OP comes back with !
Native PST import / export was added to Exchange in 2010 SP1. Prior to that we relied on the Outlook bits.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

Auto-generated links exported from InDesign do not work in tablet apps

Hyperlinks automatically detected and exported from InDesign CS6 8.0.1 as a PDF work fine on the desktop version of Acrobat Reader. However, on the iPad version of Adobe Reader as well as iBooks and GoodReader, these links are completely ignored, meaning they are just text.
On the other hand, if I was to manually set the hyperlink in InDesign or Acrobat, the link works fine.
It would be extremely tedious and time consuming to manually reset hundreds of hyperlinks in my documents since InDesign use to handle this correctly.
Is this a bug? If so, it's pretty serious and should be Adobe's priority to fix since millions of people read documents on tablet devices.

No, it's a Feature of Acrobat and reader that they attempt to create links from anything that "looks like" a URL. Other readers lack the feature.
It's not good practice to depend on this in any case as it's hardly foolproof even in Acrobat. Links that break across lines, for example, will not be properly recognized.

CUPC - Unable to log in from Windows machine not on domain

Hi,
We are unable to login to CUPC (ver 8.5.3.192248) on a windows machine that is not on the domain, however connected to the network (e.g. we can ping CUPS IP and FQDN). We've tried pointing the client to the FQDN address as well as IP Address. We get "Login Failed" message (so no "Unable to connect to network" message). The user can log in just fine on a machine that is on the domain, so everything back end should be ok.
Thanks!
Josh

I am using version 8.5.5 and that works fine on a Windows 7 that is not in the domain.
The only thing I had to do was add the server name to the hosts file, I have both the server name and the FQDN as in
192.168.1.1 cups cups.mycompany.com
You can define the server by IP address but it seems to move internally to the server name and it needs to be able to map that to an IP address
Graham

Old queries from Windows XP not work in Vista

Some queries produced with the version Oracle BI Discoverer 10.1.2.1 and Windows XP Pro SP2 do not work with the version 10.1.2.3 and Windows Vista. New queries runs normally. Can you help me? Thanks.

I have solved the problem! I used Mediainfo and determined they were .dv files (not a format I was ever familiar with!) which of course just stands for digital video.
I renamed them with .dv and quicktime recognized them.
Thanks for offering help and hopefully this helps someone else.

Migration Assistant from Windows PC not working

I have just got my first iMac and now trying to use the Migration Assistant with the iMac but it is not working.
I have loaded migration assistant on the house pc and when runnung Migration Assistant on the iMac it recognises the Dell PC. However it then seems to lock and say 'looking for other sources' and then sits in a loop.
I then open Migration Assistant on the PC and that just says 'waiting for mac to respond'
Are there any additional settings I need to change on the PC? or anywhere decent for support - there's hardly any additional material on the Apple site.
My wife is wondering what was the point of getting a Mac if the first thing doesn't even work.
Very frustating

If you are going to Start Over... You may want to have a look here...
http://pondini.org/OSX/Setup.html
And here...
Migration Assistant tips and tricks

WS2012 R2 Recovery from Windows Backup Not Working

Hi,
I tried to perform a bare metal recovery of a Windows Server 2012 R2 operating system backup but I can't get it to recover or access earlier restore points. Any help would be appreciated! I want to avoid reinstalling the OS *again*.
I have a hardware install of Windows Server 2012 R2 on drive (a), backup services saved to drive (b), and my server folders on RAID pool (c). I had verified that Windows Server Backup was executing daily and I was previously able to see several backups
in the list of restore points.
I first tried to use the Windows Recovery Wizard to restore a "Volumes" recovery on drive (a); however, I can't select the "Source Volume" (C:) to equal the "Desination Volume" (C:). I just want to replace the current drive
(a) with what's backed up. Why is this? Should this be working with source equal to destination?
Then, when restoring Windows using startup disk & recovery options, I can't see more than the last backup. Older restore points are not available. Plus, my local administrator password is not being accepted. So many things are going wrong...
The last thing I did was enable the Windows Server Essentials role and set it up, which did include picking a domain name. I wasn't happy with the ".local" TLD that was automatically created so I wanted to restore before Essentials was set up.
Is this what is preventing a recovery?
Thanks!
Steve

Hi Steve,
For performing a restore, please make sure you boot with an installation disk and restore to correct target volume - here is an article with pictures incase there is any difference on your side:
http://blogs.technet.com/b/sbs/archive/2010/06/11/how-to-perform-a-bare-metal-restore-on-small-business-server-2008.aspx
Note: Steps are for Windows SBS 2008 but it is the same as using a Windows 2012 R2 installation disk to do a recovery.
Meanwhile from the description, it is a file server before installing Windows Server Essentials role. So it is a domain controller now.
Then it should also work by uninstall Windows Server Essentials role:
It may not able to be uninstalled at once but it will suggest to uninstall some roles (which it installed in order to convert to Essential server and a DC) first. If all suggested roles could be uninstalled, you can also uninstall Windows Server Essentials
role so that it will back from DC to file server - you can reinstall it later.
If you have any feedback on our support, please send to [email protected]

Debug from one machine not working , why ?

I created standard debug configuration for portal:
remove java application type ... , and it works immediately after portal is restarted, (connecting fast).
but after disconnect and try to run debug again, studio againg newer complete step "establishing connection"
on other maching same debug working every time , connecting with no problems.
for what reason on my machine debug may working only one time?
thanks in advance

Dear Vladimir,
sometimes debugging with J2EE can bring you some surprises.
You have to be careful on how to you disconnect from your previous debug session.
Pay special attention that you click on the "Remove all terminated launches"
[http://imageshack.us/photo/my-images/707/20110908171418.jpg/]
Kindest Regards
/Ricardo Quintas

Migration Assistant from Time Machine not working, Migration Assistant from Time Machine not working

Hello,
A friend of mine recently bought a new Macbook Pro. I believe it is a 2.8 Ghz i7 model.
Anyway, they wanted to transfer all of their stuff from a 5 year old Macbook (running Snow Leopard) to their new Macbook Pro (running Lion) and they asked me for help. I suggested they run Migration Assistant from a Time Machine backup. They did that last night and everything ran fine until the very end, when they got this error message "Superdrive firmware Update 2.1 is not compatible with this version of Mac OS X." Also, it appears that nothing had been transfered.
Any suggestions?
Thanks!

Thanks a lot both. The thing was that I couldn't find any DVDs that belonged to my new computer, so I just used my old Leopard DVD thinking that it didn't matter which one I used anyway. When you said it did
matter, however, I looked a little closer and found two DVDs in my new computer's box. I'm doing a clean installation as we speak.
Thank you for your help!

New harddrive in MacBook - restore from time machine not working correctly

Recently put a new Samsung drive into my White 2007 MacBook. I put the snow leopard disk and selected restore from backup onto the newly formatted Samsung drive. After 4 or so hours it says it has completed successfully and the computer needs to re start.
After this the computer boots the apple logo appears and the spinning thingy spins. It stays at this screen and won't go any further. Any ideas?
Should I install a fresh copy of snow leopard first then restore from backup?

Hi William:
Should I install a fresh copy of snow leopard first then restore from backup?
According to this article, yes (the new HD fits the description, I think):
http://support.apple.com/kb/TS3243
Barry

Popups: Navigation from view to window does not work

Hi,
I open a second window as popup. This window has 2 views embedded, displaying view1 first. On some actions I would like to navigate to view2.
Defining an outbound plug on view1 and an inbound plug on view2, connecting them and firing the outbound withith the onaction works absolutely fine.
However, for some reasons I would like to avoid a direct navigation, but would like to navigate from view1 to the popupo window and from there to view2 (or maybe another view, ofcourse also embedded in the same popup window). Unfortunately I fail on this scenario - I can fire the view-to-window plug, but the destination on the window side (handle in method) is never reached.
Since the same concept works fine on non-popup windows I wonder whether a navigation from view to embedded window does not work for popups?
Any idea?

Hi Yashpal,
no, just one window.
The first link is view1 -> window, the second window -> view2.
I.e., I fire in the view the outbound plug, which is connected with its window.
In the window I fire an outbound plug, which is connected to view2.
In theory this should work - for non-popup windows I do not have any problem at all, however, for popup windows the navigation from view1 to the window is not processed.
In the meantime I played a little bit further: Instead of firing a navigation from view1, I now fire an event defined in the component contoller, on which an event method is registered within the window. Doing so, I reach the window, which I didn't reach via the navigation link. Once in the window, firing to view2 works just fine ...
Hope the issue is a bit clearer now. Also I found a solution, I am surprised that the simpler way via navigation does not work.

ITunes drag to import new songs in library or to create playlists from folders on windows does not work!

iTunes drag to import new songs in library or to create playlists from folders on windows does not work!
WHY? I have to solve, how can I do? Thank you

up

Same issue Network Discovery not working and Windows Update not working

I've read the threads.
This is a Vista Ultimate upgrade. My OOOOH My I have clocked 8 hours
Everything was working before. I tried all of the recommended services turning on restarting.
Also, ran into the problem of my memory being eaten. Suspected cause hibernate mode, which I had to disable. Scott Hasselman blog recommended the fix which is a cheap work around that limits machines functionality!!
I'm and IT Engineer specializing in MS product lines since Windows 1.0. MFC foundation classes etc.. What is the real problem ?
I don't have the NetBIOS over tcp/ip in my services?
I figure that the cost of my time and other individuals pays for the OS four times over. Give me a Microsoft developer subscription or something to make me happy. This is my development machine and I'm loosing time and money.
FYI, Just upgraded my second machine to Windows 8.1 OMG !!2 Hours to upgrade after the download. I loose my configuration settings. I required to have a Windows Live whatever account!!! This is not the way to compete and keep customers.
Windows XP has been by far the best deployment experience. I need a Knowledge base that gives solutions , not a troubleshooting scenario that does or does not work!!
Please , don't tell me to go and by a OEM Surface I cannot recommend this to my clients.
Thank You

Hi,
If it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
What is System Restore?
http://windows.microsoft.com/en-us/windows7/What-is-System-Restore
When you turn on network discovery, do you get any error prompt?
Please check if you have any error message about network discovery in event viewer.
Open Event Viewer
http://windows.microsoft.com/en-US/windows7/Open-Event-Viewer
What information appears in event logs (Event Viewer)?
http://windows.microsoft.com/en-US/windows7/What-information-appears-in-event-logs-Event-Viewer
Please use Windows Live SkyDrive (http://www.skydrive.live.com/) to upload the Error logs to a public folder and share the URLs with us.
Also, please temporarily turn off your firewall and all the security programs for a test.
As far as I know, Network discovery requires that the DNS Client, DNS Client, Network Connections, Network Location Awareness, Remote Procedure Call (RPC), Function Discovery
Resource Publication, TCP/IP Netbios helper, SSDP Discovery, and UPnP Device Host services are started and set to automatic.
You should check again if you have started all these services.
Regarding the update issue, I suggest you try the following suggestions.
1. Temporarily disable firewall and antivirus program to test the issue.
2. Open the Windows Update troubleshooter
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
3. Reset Windows Update components
http://support.microsoft.com/kb/971058
You may follow the steps from the link below to fix the issue.
Windows Update Not Working.
http://support.microsoft.com/kb/555989
You may also see the common Windows Updates troubleshooting guide.
Fix Microsoft Windows Update Issues
http://support.microsoft.com/kb/906602
Hope it helps.
Regards,
Blair Deng
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Import pst from windows as a working inbox and account

Hi All,
I want to import my Outlook .pst from Windows into my new Macbook running 10.8 and Office 11
I followed the directions and exported from Windows a backup.pst, and shifted this over to the Mac.
However, when I import into Outlook it doesn't come up as a working inbox but as a folder underneath Inbox/Drafts/Sent/Deleted, and when I check in Prefs > Accounts, there is no account setup.
How do I do this? Do I have to setup the accounts first, and then do the import?
or do I import the working .pst file and not the backup.pst?
Please help.

Ask on the Microsoft mac forums: http://answers.microsoft.com/en-us/mac

Rename files or folders in Windows 8 not working

Rename a file or folder on a Windows CE device is not working from Windows 8 when connected through Windows Mobile Device Center.
From Windows 7 it worked just fine!
This has been a problem for a very long time now, and im not alone according to all forums.
But no fix as far as i can find!
Is there anyone that have found a fix on this?

http://answers.microsoft.com/en-us/windows/forum/windows8_1-files/windows-8-unable-to-rename-files-on-pocket-pc/abae21b7-7ee1-41c7-853e-1ac7ea5b0413
It seems a issue in window 8.x system. Maybe you can ask for a MS support ticket.

"Erase messages in the junk mailbox when:..." not working

Option to "Erase messages in the junk mailbox when:..." not working.
I have this set in all accounts to "one day old", but junk mail in the Junk Mailbox older than one day still appears. When I re-select this option under the accounts pref's, junk mail older than one day is properly deleted, but after a day it's back to not deleting anymore!
I've deleted the Mail pref file, etc, but still no luck.
Any ideas?

Well, the Mailbox Behaviors settings are specific for each account, and the On My Mac Junk mailbox isn’t associated with any mail account, so there appears to be no way to specify such setting for that particular mailbox.
The thing is, the whole situation you’re describing doesn’t really make sense. If those messages end up in the On My Mac Junk mailbox, that means you’re manually marking them as junk after they’ve been moved to a custom “On My Mac” mailbox, which makes me believe what’s really happening here is not that many messages aren’t caught by the junk filter. What appears to be happening is that you have custom rules that prevent the junk filter from being able to catch them...

Mailbox Export from Windows 7 Machine Not Working

Similar Messages

Maybe you are looking for