Mailbox out of 96% of quota?

Mailbox is at 94% of quota???????
there are not so many mails in my Mailbox. What hapens?

Hello!
Been monitoring you precentral posting and wondering if the test still fails when not near the charger.  If using a screen protector, please remove, clean off the screen and try again.  Otherwise this device will need to be repaired.  Keep me posted.

Similar Messages

  • The IMAP server wishes to alert you to the following: Mailbox is at 96% of quota

    Mailbox is at 96% of quota...

    What mail service do you have? I use Earthlink, and I check my mail by webmail often, and have a setting like this. You can go into your folders of Inbox and Sent Mail and delete stuff, especially mails with big attachments like pics or videos. You should see the percentage go down as you do. You will have to empty trash too.

  • Passive RAC instance LMON is running out of page file quota

    I have quota watching tool that's showing lmon is running out of page file quota. What should I do to prevent database crash? ORACLE 9i RAC (active-passive) on openVMS.
    Thanks in advance

    Ah, VMS... long time no see. :)
    Since it has been ages since I touched Oracle on VMS, I really can't give you any config guidelines, other than the ones given in the Install guide. Did you follow pre-reqs and made sure you are on or above recommended minimum values?
    What's your current paging file quota limit? (and what does show process tell?)

  • May have figured it out but, "don't quote me".

    Hello : Disgruntled ipoder's, after being on all morning and evening, I have figured it out. Listen to this. I only have had my ipod 7 months. After watching the products be introduce to the public, decided to download new itunes. I think there is a flaw in it. My problem was, system error, needed to re install itunes. Okay, so I had on my computer the last few updates before today.
    So, I removed the programs of the itunes and updater Completely from computer. Yeah, you might think your music is gone but wait. After doing that I reinstalled using my disk from the initial setup. Then, I did not download from the site new itunes. Guess what, My computer recognizes my Ipod now. It is possible your computer still has your music on the drive. I have no errors, no problems. Now my ipod kept saying do not disconnect and I could not hit the menu and even go through the ipod because of error. But, everybody knows you usually can whether it is charging or not.
    Now i just stuck a cd in and imported the music fine and everything. I tell yall what if apple thinks they are gonna get some more money out of me they only have proceeded in #&*#/ me off. To get rid of the mini is just crazy some of us just got it and it hasn't been a yr. Of course new products , they want more profits. I understand but, for many who is really go buy another one? Unless your well off, it may take you a minute to accumulate money. I do wish I had color but, I don't know if I'm willing to rake out another $250 when I was planning next yr to get that laptop I wanted. It was gonna be a powerbook or ibook. I think I will take my time and search elsewhere. So, to sum it all up. I won't be attempting to download anything because apparently there's a problem.

    I hear you, i've only had my ipod mini for about two weeks and i already run into a major problem, because the screen of the ipod is blank, even when i conect it to the pc. I've tried all the suggestions that come in the manuals and nothing has worked.
    If i knew they were going to replace the Ipod Mini i wouldn't have bought it and would have waited for the new one.

  • Mail send only from one mailbox out of three

    Hi,
    I run Mail 7.3 on OS 10.9.4. I have 3 different mailboxes and Mial stopped sending from the different mailboxes and uses only one. I went to preferences and ensured this specific mailbox was not selected but that the setting to send from the selected mailbox was used. I even tried to use a different setting, selecting to send from a specific mailbox...still the same. Send always from the same one whatever the parameter selected. Any idea how to solve this problem ?
    Thanks

    Try going to Mail/Preferences/Accounts/Account information and click the SMTP sever, choose edit and make an SMTP server linked to each e-mail address. If you still have problems, check use only this server.

  • Unity Connection 8.5 mailbox quotas

    I configured mailbox quotas for user mailbox
    Send/receive quota is 3 Mgb
    Send Quota is 2 Mgb
    Warning Quota is 1 Mgb
    User mailbox is already 3.5 Mgb
    HOwever, when i  call this user from internal or external number - i still can leave a mesage for this user ( i expected system DOES NOT ALLOW to leave any new mesage for this user because his voicemail box is already exceeds Send/receive quota which is  3 Mgb )
    Checkbox for option "Full Mailbox Check for Outside Caller Messages"is already checked in
    What is wrong in this config ?

    Here is how send/receive quotas impact things:
    Quota Handling for Outside Caller Messages
    By default, if an outside caller attempts to send a message to a user whose send/receive quota has been exceeded, Cisco Unity Connection allows the caller to record a message for the recipient. This can be changed by checking the Full Mailbox Check for Outside Caller Messages check box on the System Settings > Advanced > Conversation page.
    If the recipient mailbox has not yet exceeded the send/receive quota at the time an outside caller records a message, but the quota is exceeded in the act of delivering the message, Connection delivers the message regardless of the quota or the setting of the Full Mailbox Check for Outside Caller Messages check box.
    Quota Handling for User-to-User Messages
    If a user whose voice mailbox has exceeded the send quota signs in to Connection and attempts to send a message to another user, Connection indicates that the send quota has been exceeded, and does not allow the sender to record the message. If the user calls another user and is forwarded to a voice mailbox, the user is able to leave a message, but the message is sent as an outside caller message.
    If a user attempts to send a message to another user whose mailbox has exceeded the send/receive quota, or if the quota is exceeded in the act of delivering the message, Connection sends a nondelivery receipt to the message sender.
    Connection delivers read receipts and nondelivery receipts to users regardless of whether their quotas have been exceeded.
    HTH,
    Chris

  • Need to get a listing of all users and their corresponding Exchange 2013 Mailbox Quotas using Powershell

    I will be changing the default quota on mailboxes soon, but there are a number of others who have "customized" quotas and I will need to identify them also.
    Charlie

    The following powershell command can get you the mailboxes that are using "custum "quota:
    Get-Mailbox -Resultsize unlimited | where-object {$_.UseDatabaseQuotaDefaults -eq $false}

  • Printing out double quote string

    Hello,
    I would like to know how can i print out the double quote string (")
    in JSP using out.print(), because a double qoute has already used
    for indicating the string. If the string that i want to print out is including double quote("), how can i print that string out.
    THX !

    out.println("\"mystring\"");
    generally: backslash "\" is used in Java to quote special characters e.g. out.println("c:\\my documents\\bla");

  • Mailbox quotas are different between EMC and shell commandlets output

    Exchange 2013 SP1, Win2012-based AD.
    Recently I increased default mailbox quotas settings on our mail database from 1 to 2 Gb. As earlier quotas for several mailboxes were set individually and no list of those mailboxes was kept, I decided to find all those mailboxes. So I run the following
    command:
    Get-MailboxDatabase | Get-Mailbox | fl name,EmailAddresses,*quota >c:\temp\quotas.txt
    Looking through the generated file, I discovered a score of mailboxes with explicit quotas. However, when I opened their settings in the EMC, all the quotas were displayed as 'Unlimited'. Further investigation showed that if I set specific
    quota settings on those mailboxes using the EMC, they are displayed correctly by the Get-Mailbox commandlet. However, if I set them back to 'Unlimited' in the EMC, Get-Mailbox continued to return the previous explicit settings. The only way to correct it was
    setting those values to 'Unlimited' using the Set-Mailbox commandlet.
    AD replication is healthy. There is no AD-related errors in the Application logs of our database servers. Other mailboxes with explicit quotas behave normally.
    How can it be?
    Evgeniy Lotosh
    MSCE: Server infractructire, MCSE: Messaging

    Hi,
    I tested in my lab, in Exchange 2010, the command Get-Mailbox could display the correct quota settings after I changed it to unlimited via the EMC.
    But in Exchange 2013, mine is Exchange 2013 RTM, the command Get-Mailbox didn't display the correct quota settings after I changed it to unlimited using the EAC.
    Currently, there is no related official document about this issue. Thanks for understanding.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Mailbox size

    Hi
    I have exchange server 2013 with 3 mailbox databases
    i want to make all mailboxes hosted in the first database maixmum size for each mailbox 500 mb
    how can i do that ?
    MCP MCSA MCSE MCT MCTS CCNA

    Hi Yasser,
    Please check this to set quotas for database. 
    http://technet.microsoft.com/en-us/library/bb201753(v=exchg.80).aspx.
    Use this to show you the list of mailboxes which is not taking database default quotas
    Get-Mailbox -database <DatabaseName> -resultsize unlimited | where {$_.UseDatabaseQuotaDefaults -eq
    $false}
    Use this command to make a mailbox to inherit database configured quotas.
    Get-Mailbox -Identity John | Set-Mailbox -UseDatabaseQuotaDefaults $True
    Use this command to make all mailboxes in a database to take database configured quotas.
    Get-Mailbox -database DATABASENAME | Set-Mailbox -UseDatabaseQuotaDefaults $True
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Can't move FederatedEmail mailbox to new database

    I've searched other related threads but cannot locate the problem. I've recently moved all of our mailboxes out of the default mailbox and into 4 smaller db's. All the user mailboxes are moved, as well as Discovery and SystemMailboxes. But I cannot
    get the FederatedEmail arbitration mailbox to move. Also, how many SystemMailboxes should I have? I noticed it reports I have more than one, but not one per database.
    It seems to be barking about the default quota limit in the destination database, which is set to 1GB/1.25GB/1.5GB. However, it reports the size of the arbitration mailbox as being 1MB but it still says the target quota is 1MB. What am I missing?
    [PS] C:\>get-mailbox -arbitration | select Name,database
    Name                                                       
    Database
    FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042         Concord Database
    SystemMailbox{1f05a927-85c5-4ba4-afbe-7a13721acdc1}         AHG Database
    SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9}         Concord1
    [PS] C:\>get-mailbox -arbitration -Database "Concord Database" | New-MoveRequest -TargetDatabase "Concord1"
    Mailbox size 1.023 MB (1,073,064 bytes) exceeds target quota 1 MB (1,048,576 bytes).
        + CategoryInfo          : InvalidArgument: (domain.com...bf-00a95fa1e042:MailboxOrMailUserIdParameter) [New-M
       oveRequest], RecipientTaskException
        + FullyQualifiedErrorId : F9CE6C4,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
    [PS] C:\>Get-MailboxDatabase -identity "Concord1" | fl
    RunspaceId                                   : f49b4c42-0e4b-4a52-836d-54f866060163
    JournalRecipient                             :
    MailboxRetention                             : 30.00:00:00
    OfflineAddressBook                           : \OAB 2010
    OriginalDatabase                             :
    PublicFolderDatabase                         : 2010 Public Folder Database
    ProhibitSendReceiveQuota                     : 1.5 GB (1,610,612,736 bytes)
    ProhibitSendQuota                            : 1.25 GB (1,342,177,280 bytes)
    RecoverableItemsQuota                        : 30 GB (32,212,254,720 bytes)
    RecoverableItemsWarningQuota                 : 20 GB (21,474,836,480 bytes)
    IndexEnabled                                 : True
    IsExcludedFromProvisioning                   : False
    IsSuspendedFromProvisioning                  : False
    DumpsterStatistics                           :
    DumpsterServersNotAvailable                  :
    ReplicationType                              : None
    AdministrativeGroup                          : Exchange Administrative Group (FYDIBOHF23SPDLT)
    AllowFileRestore                             : False
    BackgroundDatabaseMaintenance                : True
    ReplayBackgroundDatabaseMaintenance          :
    BackgroundDatabaseMaintenanceSerialization   :
    BackgroundDatabaseMaintenanceDelay           :
    ReplayBackgroundDatabaseMaintenanceDelay     :
    MimimumBackgroundDatabaseMaintenanceInterval :
    MaximumBackgroundDatabaseMaintenanceInterval :
    BackupInProgress                             :
    DatabaseCreated                              : True
    Description                                  :
    EdbFilePath                                  : F:\Mailbox\Concord1.edb
    ExchangeLegacyDN                             : /o=domain/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Con
    figuration/cn=Servers/cn=casarray.domain.com/cn=Microsoft Private M
    DB
    DatabaseCopies                               : {Concord1\FL2000-EXMBX001}
    Servers                                      : {FL2000-EXMBX001}
    ActivationPreference                         : {[FL2000-EXMBX001, 1]}
    ReplayLagTimes                               : {[FL2000-EXMBX001, 00:00:00]}
    TruncationLagTimes                           : {[FL2000-EXMBX001, 00:00:00]}
    RpcClientAccessServer                        : casarray.domain.com
    MountedOnServer                              :
    DeletedItemRetention                         : 14.00:00:00
    SnapshotLastFullBackup                       :
    SnapshotLastIncrementalBackup                :
    SnapshotLastDifferentialBackup               :
    SnapshotLastCopyBackup                       :
    LastFullBackup                               :
    LastIncrementalBackup                        :
    LastDifferentialBackup                       :
    LastCopyBackup                               :
    DatabaseSize                                 :
    AvailableNewMailboxSpace                     :
    MaintenanceSchedule                          : {Sun.1:00 AM-Sun.5:00 AM, Mon.1:00 AM-Mon.5:00 AM, Tue.1:00 AM-Tue.5:00
    AM, Wed.1:00 AM-Wed.5:00 AM, Thu.1:00 AM-Thu.5:00 AM, Fri.1:00 AM-Fri.5:
    00 AM, Sat.1:00 AM-Sat.5:00 AM}
    MountAtStartup                               : True
    Mounted                                      :
    Organization                                 : domain
    QuotaNotificationSchedule                    : {Sun.1:00 AM-Sun.1:15 AM, Mon.1:00 AM-Mon.1:15 AM, Tue.1:00 AM-Tue.1:15
    AM, Wed.1:00 AM-Wed.1:15 AM, Thu.1:00 AM-Thu.1:15 AM, Fri.1:00 AM-Fri.1:
    15 AM, Sat.1:00 AM-Sat.1:15 AM}
    Recovery                                     : False
    RetainDeletedItemsUntilBackup                : False
    Server                                       : FL2000-EXMBX001
    MasterServerOrAvailabilityGroup              : FL2000-EXMBX001
    MasterType                                   : Server
    ServerName                                   : FL2000-EXMBX001
    IssueWarningQuota                            : 1000 MB (1,048,576,000 bytes)
    EventHistoryRetentionPeriod                  : 7.00:00:00
    Name                                         : Concord1
    LogFolderPath                                : E:\Mailbox\Concord1
    TemporaryDataFolderPath                      :
    CircularLoggingEnabled                       : False
    LogFilePrefix                                : E04
    LogFileSize                                  : 1024
    LogBuffers                                   :
    MaximumOpenTables                            :
    MaximumTemporaryTables                       :
    MaximumCursors                               :
    MaximumSessions                              :
    MaximumVersionStorePages                     :
    PreferredVersionStorePages                   :
    DatabaseExtensionSize                        :
    LogCheckpointDepth                           :
    ReplayCheckpointDepth                        :
    CachedClosedTables                           :
    CachePriority                                :
    ReplayCachePriority                          :
    MaximumPreReadPages                          :
    MaximumReplayPreReadPages                    :
    DataMoveReplicationConstraint                : None
    IsMailboxDatabase                            : True
    IsPublicFolderDatabase                       : False
    AdminDisplayName                             : Concord1
    ExchangeVersion                              : 0.10 (14.0.100.0)
    DistinguishedName                            : CN=Concord1,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPD
    LT),CN=Administrative Groups,CN=domain,CN=Microsoft Exchange,CN=Ser
    vices,CN=Configuration,DC=domain,DC=com
    Identity                                     : Concord1
    Guid                                         : f9901c44-c975-428b-88e6-57ff96d4f89d
    ObjectCategory                               : domain.com/Configuration/Schema/ms-Exch-Private-MDB
    ObjectClass                                  : {top, msExchMDB, msExchPrivateMDB}
    WhenChanged                                  : 9/5/2014 10:28:51 AM
    WhenCreated                                  : 8/13/2014 8:25:34 PM
    WhenChangedUTC                               : 9/5/2014 2:28:51 PM
    WhenCreatedUTC                               : 8/14/2014 12:25:34 AM
    OrganizationId                               :
    OriginatingServer                            : fl2000-dc003.domain.com
    IsValid                                      : True
    Thanks!
    Jim

    Hi
    Open up that federated mailbox in AD.
    Clear the Attributes on the account as per below:
    mDBOverHardQuotaLimit
    mDBOverStorageQuota
    mDBUseDefaults
    Try move the mailbox.
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Dynamic SQL and Data with Single Quotes in it.

    Hi There,
    I have a problem in that I am using dynamic SQL and it happens that one of the columns does contain single quotes (') in it as part of the data. This causes the resultant dynamic SQL to get confused as the single quote that is part of the data is taken to mean end of sting, when in fact its part of the data. This leaves out a dangling single quote that was meant to enclose the string. Here is my dynamic SQL and the result of the parsed SQL that I have captured:
    ****Dynamic SQL*****
    l_sql:='select NOTE_TEMPLATE_ID '||
    'FROM TMP_NOTE_TEMPLATE_VALUES '||
    'where TRIM(LEGACY_NOTE_CODE)='''||trim(fp_note_code)||''' '||
    'and TRIM(DISPLAY_VALUE)='''||trim(fp_note_text)||''' ';
    execute immediate l_sql INTO l_note_template_id;
    Because the column DISPLAY_VALUE contains data with single quotes, the resultant SQL is:
    ******PARSED SQL************
    select NOTE_TEMPLATE_ID
    FROM TMP_NOTE_TEMPLATE_VALUES
    where TRIM(LEGACY_NOTE_CODE)='INQ' and TRIM(DISPLAY_VALUE)='Cont'd'
    And the problem lies with the single quote between teh characters t and d in the data field for DISPLAY_ITEM. How can I handle this?
    Many thanks,

    I have been reliably informed that if one doesn't enclose char/varchar2 data items in quotes, the right indices may not be usedI am into oracle for past 4 years and for the first time i am hearing this.
    Your reliable source is just wrong. Bind variables are variables that store your value and which are used in SQL. They are the proper way to use values in your SQL. By default all variables in PL/SQL is bind variable.
    When you can do some thing in just straight SQL just do it. Dynamic SQL does not make any sense to me here.
    Thanks,
    Karthick.

  • SQLPlus problem - user enters quote in substitution variable

    Hello,
    I have a SQL Plus script report, where user is prompted to enter "customer name".
    Some customer names contain single quotes/apostrophes.
    When user type such name, the script will error out with
    ORA-01756: quoted string not properly terminated
    I can't ask users to use '' instead of ' . I can't control what they enter. Is there a way to process single quote so the statement below will work:
    select * from sometable where customer_name = '&1'
    where &1 = Smith's
    I can't do replace, etc, because it's all error out with the same error. I need to replace ' on SQLPlus level somehow. One logical way to do it would be to redefine the string separation charachter somehow...
    SQL*Plus: Release 8.0.6.0.0
    Thanks,
    Vlad
    Message was edited by:
    user454392

    As it's a SQL*Plus substitution variable it is literally copied into the code just prior to compilation, so you can't stop it from breaking the compilation of the code. q quoted strings are the only solution I can think of but of course they are only available from 10g onwards.
    The other alternative is to capture the input in a shell/batch script which validates it first and then passes the value to the SQL to be executed.

  • Single Quote causing problem in XPATH

    The workflow was working fine until one of the fields had a single quote in the string and caused the update action to stall.
    Using the Execute SQL query module I am updating data in an Oracle table. The query looks like this
    UPDATE GSI_FEEDBACK_FORM_HEADERS
    SET SITE_STREET = '{$ /process_data/xfaform/object/data/xdp/datasets/data/form1/Details/site_street $}',
    SITE_STREET2 = '{$ /process_data/xfaform/object/data/xdp/datasets/data/form1/Details/site_street2 $}'
    One of the forms had the street value
    "Connah's Quay Deeside". I figured out that the single quote is causing the module to read it as the end of the XPATH, hence causing a "SQL command not ended properly" error.
    Any suggestions to oversome this issue.
    Aditya

    No problem
    It also:
    Makes your SQL look much neater.
    You can type in "test" values for the parameters, so that you can test your SQL statement and see the results.
    Howard
    http://www.avoka.com

  • Regarding Not enough quota is available to process this command

    Hello,
    My java application is is multi-threaded & is supposed to run as a 24/7 service. the application does number of I/O operations.
    roughly 160,000+ read/write from/to flat files in the hard disk.
    I was doing some testing and found that the application crashed
    (it doesnt actually crash but rather freezes)
    at around 5-7 hours after starting the application.
    The exception thrown out was
    Not enough quota is available to process this command.
    ther are multiple instances of this exception thrown
    The JVM doesnt actually crash but I get this exception thrown
    during every read/write process.
    This doesnt seem to be a Java exception but rather is thrown by the OS.
    Also all the sockets that I have created in my application fails.
    and all windows allications cease to work. They start to work
    after I explicitly shut-down the JVM
    I did some googling and found that I may need to increas my paging size.
    My system has 1.5GB RAM and the default paging size was 3GB, I've
    increased it to an initial size of 4092MB and a Max of 6092GB.
    Now I find that the app runs a bit longer but still crashes.
    I checked the Mem usage via task manager and the Mem usgae remains constant varies around 190,000K to 270,000K
    I also checked using a profiler tool and it seems to be fairly constant.
    Has anyone had this problem or any suggestions will be great!

    I may have solved the problem, like I said I am making
    160,000+ read/write everyday in my application.
    i noticed that in my read and write methods - which is called 160,000 time, I open the file through a RandomAccessFile object but I dont explicitly close the file object at the end of the function!
    I assumed that it will be taken care by JVM during garbage collection
    Anyway after explicitly closing the RandomAccessFile object, the app doesnt seem to crash, anyway Ill let the app run for a whole week and see how it reacts performance wise.

Maybe you are looking for