Mailbox Received Date

I'm an auld curmudgeon. I don't like the way that Mail displays the date when a message was received.
I do not like "Tomorrow", "Today", "Yesterday", "Last Week", etc. appearing as the date that the message was received. I don't like seeing the date reported as "dd January yyyy" and neither do I like seeing AM and PM displayed on the time.
I want Mail to report that the message was received at the following time
YYYY/MM/DD HH:MM:SS.NZ
The Z can be replaced by UTC, GMT, or a local time zone designator.
Can anyone provide a clue how to force Mail to display times based on my preferences?

I think I have a solution:
Open Date and Time in System Preferences. Choose International. Pick the format you like. (I tested with South Africa). Close and Reopen mail.
mail.app actually changes the date format to accomodate the width of the column. As you narrow the column it will change to fit the available space.
Maybe you can find a variation that does exactly what you want.
- Wayne
PowerMac G5 Mac OS X (10.4.8)

Similar Messages

SCOM SQL Query to find Mail Latency (Send/ Receive) Data.

Hi,
I unable to find Mail Latency (Send/ Receive) Data in SCOM 2012 SQL Query.
need your help to find SQL query that fetches below details
1. Average Time for Accessing Mailbox.
2. Average Time to Send and Receive Mail.
Regards,
Vinoth Kumar.

Hi Vinoth
There are no specific tables storing the mailbox related data.
To find information about Exchange in SCOM you need the Exchange management pack for the version of Exchange you are running, as well as monitoring the Exchange servers.
When that has been done you can find reports and performance views for Exchange.
I am unsure if you can find this specific information for Exchange in SCOM, i would look into the management pack. If you cannot find the information, i suggest you consult your Exchange administrator to get this information.
www.coretech.dk - blog.coretech.dk

Can not receive data 10054

My version of Essbase is 6.5.1.4. On the server machine it self when I am adding members to outline I get "Can not receive data 10054". To resolve this problem I tried to increase the server page file size but the problem persist.Does anyone know a solution to this problem?SAK

How exactly are you retrieving data; is it smartview, excel addin, forms, reports etc ?

How to use sda6810 to receive data from a rs485 channel?

I want to use sda6810 to anlyze data from a rs485 bus. So I use Labview to progame the sda6810 with the drivers.Firstly,I intilite the card,then I cofigued an channel to send data from a buffer,and configued another channel to receive data from the first chanel . But unfortunatly the data I received was not equal to the data I sended.And there are not any error messages indicated in Labview
And when I try to use the GP channel,I found it worked properly.please tell me how I can solve the problem?

I really apreciate your help.You told me that
I should use the exameples which shipped with sda driver firstly. I do used them,and it worked correctly.So I think the connections was being setup properly.And I
used labview to progame the rs485 channel
. It do received something .But it was incorrect.
I would be grateful if you could send me an
example writted by labview,or you could tell
me you e-mail address.
Here is my code .
Attachments:
youyou2.zip ‏110 KB

SQL Service Broker 2012: the connection was closed by the remote end, or an error occurred while receiving data: '64(The specified network name is no longer available.)'

Anyone can help with the below issue please? Much appreciated.
We have about 2k+ messages in sys.transmission_queue
Telnet to the ports 4022 is working fine.
Network connectivity has been ruled out.
The firewalls are OFF.
We also explicitly provided the permissions to the service account on Server A and Server B to the Service broker end points.
GRANT
CONNECT ON
ENDPOINT <broker> <domain\serviceaccount>
Currently for troubleshooting purposes, the DR node is also out of the Availability Group, which means that we right now have only one replica the server is now a traditional cluster.
Important thing to note is when a SQL Server service is restarted, all the messages in the sys.transmission queue is cleared immediately. After about 30-40 minutes, the errors are continued to be seen with the below
The
connection was
closed by the
remote end,
or an
error occurred while
receiving data:
'64(The specified network name is no longer available.)'

We were able to narrow down the issue to an irrelevant IP coming into play during the data transfer. We tried ssbdiagnose runtime and found this error:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>SSBDIAGNOSE -E RUNTIME -ID 54F03D35-1A94-48D2-8144-5A9D24B24520 Connect to -S <SourceServer> -d <SourceDB> Connect To -S <DestinationServer> -d <DestinationDB>
Microsoft SQL Server 11.0.2100.60
Service Broker Diagnostic Utility
An internal exception occurred: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
P 29830 Could not find the connection to the SQL Server that
corresponds to the routing address tcp://XX.XXX.XXX.199:4022. Ensure the tool is connected to this server to allow investigation of runtime events
The IP that corresponds to routing address is no where configured within the SSB. We are yet unsure why this IP is being referred despite not being configured anywhere. We identified that this IP belongs to one of nodes other SQL Server cluster, which has
no direct relation to the source server. We failed over that irrelevant SQL Server cluster and made another node active and to our surprise, the data from sys.transmission_queue started flowing. Even today we are able to reproduce the issue, if we bring
back this node [XX.XXX.XXX.199] as active. Since, its a high business activity period, we are not investigating further until we get an approved downtime to find the root cause of it.
When we get a approved downtime, we will bring the node [XX.XXX.XXX.199] as active and we will be running Network Monitor, Process Monitor and the SSB Diagnose all in parallel to capture the process/program that is accessing the irrelevant IP.
Once, we are able to nail down the root cause, I will share more information.

Error in Receiving Date Updation in MIGO Transaction

Hi All,
I am creating a GR using BAPI_GOODSMVT_CREATE, by passing following Data:
Material Document Header Data
wa_gr_header-pstng_date = sy-datum.
wa_gr_header-doc_date = vbrk-fkdat.
wa_gr_header-pr_uname = sy-uname.
wa_gr_header-ref_doc_no = va_ponum.
wa_gr_header-bill_of_lading = vbrk-fkdat.
Assignment GM_CODE
wa_gr_code-gm_code = '01'.
Material Document Item
wa_gr_item-plant = wa_ekpo-werks.
wa_gr_item-po_number = wa_ekpo-ebeln.
wa_gr_item-po_item = wa_ekpo-ebelp.
wa_gr_item-move_type = ca_mov.
wa_gr_item-entry_qnt = wa_ekpo-menge.
wa_gr_item-entry_uom = wa_ekpo-meins.
wa_gr_item-mvt_ind = ca_b.
Though the GR is getting created, when we access the Material Document through the PO History tab in Purchase Order, the Receiving date is updated as 20.10.0422(though I am not passing it in my program). But the Posting Date and Document Date are correctly updated as 22.04.2010.
Moreover there is no field for Receiving Date in BAPI Goods Movement Header Structure.
Could someone please explain why the date is being reversed as 20.10.0422 instead of appearing as 22.04.2010 and the solution for this problem?
Thanks in Advance

Hi,
Please check if there is any enhancement existing for Updating this date field.
Regards,
Sekhar

Problem in mail api to print the received date of an email

Do anyone know how to get received date of an email?I am using POP3 server.So while printing the date using getReceivedDate(), getting null pointer exception....So how to get the date?...Anyone know this using headers or something?I want a sample program in mail api of java....
Thanks in advance...

There is no logic inside the getReceivedDate() method.It's a pre-defined method i have used.I read somewhere that POP3 server won't give information about date.So it is returning NPE.And there it was suggested to use Received headers or something to get the date of a particular email.I am new to the mail api.So anyone know how to use those Received Headers to read the date of an email?

How do you receive data from multiple people on a single port?

I am trying to make a server where it receives the data from multiple users and then send it back to them all- multicasting audio to be exact. I tried setting it up but when i open the RTP session i get "can't open local data port" if i have more than one used connected to me. Does anyone have a solution? I didnt find much on the samples page and the multicast example from http://java.sun.com/products/java-media/jmf/2.1.1/apidocs/javax/media/rtp/RTPManager.html
didnt help either- i used the same ipaddress for the initialize and addtarget but i get "Local Data AddressDoes not belong to any of this hosts local interfaces". I am really in a pickle... If anyone can help me out that would be great!
EX: If A,B,C want to multicast they will all send to Server S using port 3000. Server S will create listeners for each of them using port 3000 and when received data it will send back to all of them at 4000. This is what i am trying to do... should i make multiple threads? would that help? thanks and please help!

To send to everyone, you can send to a multicast address (choose one from 224.0.0.0 to 239.255.255.255), on a given port (2000). I don't have any code example here but it should very similar to unicast. As you said, you just have to register the Session and add a target with this same address.
I don't have any example myself, but you should find code example of both server and client around. It is a very common usage of jmf rtp.
I don't know how to mix several audio streams together (never had to do this), so I'm afraid I can't answer your other questions, sorry... The only way to know if it will slow down the transmission is to try. :)

I need to find out how much wifi data my apps are using. I have a very limited amount of wifi data, and I am exceeding my monthly allowance. Apparently, even apps I think are not open are sending/receiving data through the wifi and using up my allowance.

I need to find out how much wifi data my apps are using. I am on a very limited amount of WiFi data each month, which I am regularly exceeding. I have been told to work out which of my apps is using the data. Also, I think I have closed an app by double clicking the home button, then swiping the app up - is this the way to close it, or will it still be sending/receiving data?

Go into your Settings : General : and turn off background refresh for your apps. In Settings : Mail turn Fetch new data to OFF and Load Remote Images to OFF. This will mean that Mail will only check for messages when you actually use it, and all your advertising junk mail won't have all the images in it.
Turn off push notifications every chance you get.
Make sure you are actually quitting apps: to quit apps press the Home button twice and you should see a bunch of smaller screen images for every open app. To quit the app swipe from the screen image (not the icon) upward off the top of the iPad. You can swipe left and right to see more open apps, but there must be no left-right movement on the screen when you swipe upward to close the app.
Turn off your internet connection when you do not need it. The easiest way to do this is to swipe up from the bottom of you screen to get the control centre, and then touch the airplane to turn on airplane mode. You can repeat this sequence to turn it back on again when you need it. Most especially turn airplane mode on whenever you are sleeping your iPad for long periods. This will save battery life too. OR actually turn your iPad off - which means holding the power key down for several seconds until the red swipe bar appears, and then swipe to turn it off. If you go this route, note that it will take longer to turn on then it takes to wake from sleep.

Removing a mailbox expiration date/time

Anyone know what value to specify to remove a mailbox expiration date/time?
If I remove the value via C1, then the value returned by the Admin API as a
64 bit real number is 0 representing 30/12/1899 0:0:0. However, setting this
value results in C1 displaying an expiration date/time in 1943. What does
work on my system (GW 7.0.3) is to specify 1-Jan-1970 13:00:00 but that does
not work on other systems, possibly suggesting the value to specify is
timezone dependent, although experimentation along those lines has so far
proved unsuccessful.
TIA, John

I did eventually get an answer from Novell on this. Removing a mailbox
expiration date has not been supported, but supposedly is from 8.0 SP1
onwards where a value of zero should do the job.
John
"John Baird" <[email protected]> wrote in message
news:IRNQl.1491$[email protected]..
> Thats not working here. If I pass in a date/time of 1/1/70:0:0:0 C1 shows
> 31/12/69:23:00:00. The only date/time that removes the expiration
> date/time here is 1/1/70:13:00:00. Oddly, aside from that specific
> date/time C1 1.3.6h, shows any date/time earlier than 15/3/70:2:00:00 as
> one hour ealier than I specified. The value 1/1/70:13:00:00 does not
> appear to work elsewhere. If I treat it as 1/1/70:00:00:00 + GMT offset +
> 1 hour (our GMT offset is +1200), the corresponding value does not work in
> other timezones. Frustrating ...
>
> Thanks for responding.
> John
>
> "Tommy Mikkelsen" <[email protected]> wrote in message
> news:qNHQl.1439$[email protected]..
>> Not sure, but beleave you should set it to Unix Start Date...
>>
>>
>> --
>> Tommy Mikkelsen
>> IT Quality A/S, Denmark
>> Novell Support Forums SYSOP
>>
>> Sorry, but no support through email
>> Be a GroupWiseR, go http://www.groupwiser.net
>
>

Port number on which SAP receives data from extrernal systems

Hi,
We have an external application which sends/receives data to/from SAP. I am trying to figure out the port on which SAP server getting/sending data. Every time on SAP server side, the port opened is sapgw01( sapgw<system number>). Can anyone tell how to figure out the correct port on which SAP is operating in this case ?

Hi
check the following link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4e515a43-0e01-0010-2da1-9bcc452c280b

CANT receive data via a network, help me please

Hi, I am not as newbie as I look like to.
I am trying to receive data through a network. The problem is that I dont know the file size, so I kept reading until reaching the end of file and the save it to a file. The problema is that I am never geting the -1 result from the read method.
Now, I noticed that the -1 is returned when I close the DataOutputStream. So thats okay. The problem is that the sender is not make in java, but on pocketBuilder. And I cant ask for the client to close an outputStream. So Is there any way to just read the data without knowing the number of the bytes to receive and doesnt waiting for the end of the stream.

When the number of bytes read is less than the array
lengthThat doesn't necessarily mean you're at the end of the data.
Any other wahy, maybe a timer (if is not receiving
any byte for 20 seconds then cut the conexion?)Again that doesn't necessarily mean you're at the end of the data.
There is no way to know you're at the end of the data without either an application protocol containing the length, or a socket close at the sender.

Forward to gmail/hotmail Event ID 3030 552 5.7.0 Number of Received: DATA headers exceeds maximum permitted

A user wants me to forward his Exchange 2003 recipient’s email to his Gmail account.
In Active Directory Users and Computers I created a Contact and then in the recipient “Delivery Options” Forward to: I put that contact.
He receives all the forwards of email created internally at Gmail, but only some email that comes from external domains make it to Gmail.
Most (but not all) external email when forwarded to his Gmail account, by Exchange 2003, creates an NDR (non-delivery report) saying “DATA headers exceeds maximum permitted” (shown below). I’m pretty sure this message is generated by Exchange 2003 because it
is the same if the external, forwarded to, account is Gmail or Hotmail.
Any ideas how to solve this?
-------Error Msg in Outlook----------
John Smith on 12/12/2014 5:26 PM
The recipient could not be processed because it would violate the security policy in force
<ourdomain.com #5.7.0 smtp;552 5.7.0 Number of 'Received:' DATA headers exceeds maximum permitted>
“ourdomain.com”, above, is the name of our email domain.
-------- Event Viewer Error-----------
Event Type: Error
Event Source: MSExchangeTransport
Event Category: NDR
Event ID: 3030
Date: 12/12/2014
Time: 5:08:58 PM
User: N/A
Computer: WIN2K3
Description:
A non-delivery report with a status code of 5.7.0 was generated for recipient rfc822;[email protected] (Message-ID <001301d01671$54abb8c0$fe032a40$@com>).

Hi,
Based on the error Number of 'Received:' DATA headers exceeds maximum permitted. This message header size could exceeds message header size limits.
Message header size limits These limits apply to the total size of all message header fields that are present in a message. The size of the message body or attachments isn’t considered. Because the header fields
are plain text, the size of the header is determined by the number of characters in each header field and by the total number of header fields. Each character of text consumes 1 byte.
So, please check the message header size limits setting on receive connector by the following cmdlet:
Get-ReceiveConnector “Connector name” | FL MaxHeaderSize
Then check the problematic message header and compare them to check this issue. If these message header exceeds the message header size limit, we can use the following cmdlet to change the maximum header size:
Set-ReceiveConnector “Connector Name” –MaxHeaderSize “value”
The MaxHeaderSize parameter specifies in bytes the maximum size of the SMTP message header that the Receive connector accepts before it closes the connection. The default value is 65536 bytes. When you enter a value, qualify the value with one of
the following units:
B (bytes)
KB (kilobytes)
MB (megabytes)
GB (gigabytes)
Unqualified values are treated as bytes. The valid input range for this parameter is from 1 through 2147483647 bytes.
Note: Some third-party firewalls or proxy servers apply their own message header size limits. These third-party firewalls or proxy servers may have difficulty processing messages that contain attachment file names that are greater than 50 characters
or attachment file names that contain non-US-ASCII characters.
Best Regards.

Adobe Reader XI hangs on "receiving data" after submitting to php

I am submitting PDF fillable form to php, then pdf is save & email to destination. It works, I receive the pdf filled file via email; However, in Safari works perfect redirects, etc. When using FireFox, Chrome, then Adobe Reader opens.
Then when submitting from Adobe Reader, it works fine, I receive the email with attachment.
The problem is that Adobe Reader hangs "receiving data" for a long time, then I get this message "An error occurred during the submit process. The network service you are trying to reach could not process the request."
I do get the file via email and it is fine. What is Adobe Reader waiting for?.
Thanks in advance

I do not think it is returning anything, here is the php code ...
<?php
$fileatt = date("d-m-Y-His") . ".pdf"; // Creates unique PDF name from the date
copy('php://input',"pdfs/".$fileatt); // Copies the pdf form data to a folder named pdfs
$fileatt = "pdfs/".$fileatt; // Path to the file gives the pdfs folder plus the unique file name we just assigned
$fileatt_type = "application/pdf"; // File Type
$fileatt_name = "Application Form_".$fileatt.".pdf"; // Filename that will be used for the file as the attachment when it is sent
$email_from = "mywebsite"; // Who the email is from
$email_subject = "Completed online Applications"; // The Subject of the email
$email_message = "Please find a recent online application attached.
$email_message .= "Any problems please email me...
"; // Message that the email has in it
$email_to = "[email protected]"; // Who the email is to
$headers = "From: ".$email_from;
//no need to change anything else under this point
$file = fopen($fileatt,'rb');
$data = fread($file,filesize($fileatt));
fclose($file);
$semi_rand = md5(time());
$mime_boundary = "==Multipart_Boundary_x{$semi_rand}x";
$headers .= "\nMIME-Version: 1.0\n" .
"Content-Type: multipart/mixed;\n" .
" boundary=\"{$mime_boundary}\"";
$email_message .= "This is a multi-part message in MIME format.\n\n" .
"--{$mime_boundary}\n" .
"Content-Type:text/html; charset=\"iso-8859-1\"\n" .
"Content-Transfer-Encoding: 7bit\n\n" .
$email_message .= "\n\n";
$data = chunk_split(base64_encode($data));
$email_message .= "--{$mime_boundary}\n" .
"Content-Type: {$fileatt_type};\n" .
" name=\"{$fileatt_name}\"\n" .
//"Content-Disposition: attachment;\n" .
//" filename=\"{$fileatt_name}\"\n" .
"Content-Transfer-Encoding: base64\n\n" .
$data .= "\n\n" .
"--{$mime_boundary}--\n";
$ok = @mail($email_to, $email_subject, $email_message, $headers);
if($ok) {
unlink($fileatt); //NOW WE DELETE THE FILE FROM THE FOLDER pdfs
header("Location: return.pdf"); //where do we go once the form has been submitted.
} else {
die("Sorry but the email could not be sent. Please go back and try again!");
?>

Date Field in the Index when Apending Emails to PDF only shows received date

Hi,
I have Adobe Professional X with Outlook 2010 and I need to create a pdf with an index of about 1300 emails that are a mix of send and received items. For legal reasons I need to be able to sort them by sent date, however there is only one date field visible when I look at the columns in the pdf. this field seems to be the received date.
Does anyone know anyway to change this or to add another field so that I can see the send date of emails?
Thanks
Lance

Hi,
Hi segment E1P0000 is standard segment, you will not be able to make any changes. As per requirement you need to create the z<segment> with required field and assign the corresponding data element(as per your data type requirement).
Thanks,
Asit Purbey.

Mailbox Received Date

Similar Messages

Maybe you are looking for