Mailbox symbolic links not working

Hello,
I have a mailbox that was on my iDisk and so it was visible within Mail on both my Macbook Air and iMac. I recently relocated that to "on my mac" on the iMac and naturally being local to the iMac, Macbook Air can't see it. I'd like to rectify that.
So, I moved the mailbox to my Dropbox and then created a symbolic link to it in ~/Library/Mail/V2/Mailboxes.
The library shows up in Mail under "on my mac" - terrific. However, the mailbox and it's sub-folders are empty - according to Mail (not when I look in the Finder).
I selected the mailbox in Mail and tried Maibox > Rebuild but that had no impact.
Any ideas on how to get Mail to recognize the messages in the mailbox hierarchy?
Thanks.
Tony.

Same question here. I have mutliple IMAP accounts and emails dating back over a decade, so I like to organize my messages offline "On My Mac." I recently got a MBA to compliment my MBP. Setting up the IMAP accounts on my MBA was a snap, but I'd like to have my "On My Mac" messages available (and synchronized) on both machines.
I copied the "Mailboxes" folder from my MBP to Dropbox, made a symlink, and placed the symlink in the ~/Library/Mail/V2/ folders of both machines. Going back into Mail, the folder structure shows up fine on both my MBP and on my MBA, but the messages only show up on my MBP. Interestingly, when I look in the Finder, the emails are present in the same fashion on both machines in the ~/Library/Mail/V2/Mailboxes folder (which are both symlinked to the original "Mailboxes" folder in Dropbox). Additionally, if I create a new mailbox folder on my MBA, it does show up on my MBP (and vice-versa). However, placing messages in a mailbox folder results in the message only showing on that particular Mac.
I created a "Test" mailbox folder on my MBA (it showed up appropriately on my MBP), and I placed a "test" email into that folder with each Mac. Within Mail, each Mac only shows its own message. In the Finder, both show up in the "Test.mbox" but in separate next-level folders (long-named folders like "92492ACE-CE8452-897CS-9823409AC9283" within the "Test" folder). Although the folder and file permissions are the same, I have a hunch that mail only recognizes its only long-named folders.
This doesn't provide a solution (still working on it), but I think it may help to pin down the issue.
Any other comments or suggestions would be appreciated.

Similar Messages

Adobe Edge links not working

Yeah I have also experienced links not working when I import my .oam file from Adobe Edge Animate also. Is there anything the Muse team is doing to fix this issue? I need a response from you guys by the end of the week. my company website is malfunctioning due to issues with your software. If there is some sort of hotfix please let us know.

When you install the software illegally, using a volume license, there is a script you can run that will enter all of the adobe servers into your local DNS hosts file so the software can be activated. This makes accessing those domains impossible. This scenario fits the description of your issue, not suggesting anything beyond that.
The hosts file is in /private/etc/hosts and can be accessed through the terminal:
sudo nano /private/etc/hosts
If you see a bunch of adobe servers in there, that is your problem.

Add new document link not working in upgraded sharepoint 2013?

Hello there,
Upgraded SharePoint team sites from 2010 to 2013. add new document link not working for shared document in upgraded sharepoint 2013?. it is specially not working on machine where Office web apps set up with this sharePoint server and it
is working fine with environment Office web apps not configured with Sharepoint.
Looking resoluion /suggestion, thanks in advance.
Regards,
Sushil

Hi Sushil,
According to your description, my understanding is that the add new document link was not working on machine where Office web apps set up with this SharePoint server after you upgraded SharePoint team sites
from 2010 to 2013.
For your issue, it can be caused by integrating Office Web Apps with upgraded SharePoint Site.
Firstly please make sure claims-based authentication is used by the SharePoint web application that is used to create the new document. Only web applications that use claims-based authentication can open
files in Office Web Apps. To determine the authentication provider for a web application, follow these steps:
1.In SharePoint 2013 Central Administration, click Manage web applications.
2.Select the web application that you want to check, and click Authentication Providers on the ribbon.
The authentication provider must be displayed as Claims Based Authentication for Office Web Apps to work correctly with the web application. To resolve this issue, you can delete the web application and recreate
it using claims-based authentication, or you can change the authentication method of the web application.
Secondly, make sure the WOPI zones match on the SharePoint 2013 and the Office Web Apps Server farm.
To do this, run the following command on the SharePoint Server:
Get-SPWopiZone
The result will be one of the following:.
internal-https
internal-http
external-https
external-http
Next, run the following command on the SharePoint Server.
Get-SPWOPIBinding
In the output, look for WopiZone: zone. If the results from Get-SPWopiZone don’t match the zone that is returned by Get-SPWOPIBinding, run the Set-SPWOPIZone -Zone cmdlet on the SharePoint Server to change
the WOPI zone to match the result from Get-SPWOPIBinding.
If not work, you can try to disconnect SharePoint 2013 from Office Web Apps Server and re-configure Office Web Apps for SharePoint 2013.
For more information, please refer to the article:
http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Number 2 key(with "at" symbol) is not working......

Hi,
i am using HP 15-d006tu Notebook PC with windows 8 os.
Recently i started facing a serious problem ie key with numer 2 and at symbol is not working. my model is having numeric keypad so i can type 2 with that but i am not able to type at symbol. Finding it really hard to copy paste the email addresses or the symbol alone. i checked whether it is jammed or something like that but nothing is there and its pressing like anyother key but when i press that key nothing is happening.
kindly let me know whether it is a hardware issue or some virus or something like that????
Should i take my device to the service center and change the entire keypad???
Really finding this problem a big headache. Its not even 1 year since i bought this laptop.
Please please guide me.....
Thank in advance
Jobin

Hi
Did you try connecting to USB keyboard and check?
Shut down the notebook
unplug the AC Adapter
Disconnect all the external peripheral devices
then remove the battery
Hold down the Power button for 30 seconds
Re-insert the battery and plug in the AC Adapter
Tap away at the ESC key as you start the notebook to see if this will launch the Start-up Menu
then select F10 to enter the bios menu
Press F5 to load the defaults ( this is sometimes F9, but the menu at the bottom will show the correct key )
use the arrow keys ( assuming they work in this menu ) to select 'Yes' and hit enter
Press F10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
If that doesn't resolve the problem, then it's probably hardware issue,
You can confirm it by testing keyboard from BIOS:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03467259
Contact HP in your region:
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Regards,
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Fresh Install HCM 9.1 but Links not working. Help please

Dear All,
I'm trying to make a switch from SAP to PeopleSoft. I tought it easier to install PSFT since the number of source to install is much less than SAP. However, I kept getting same error where the links not working no matter which environment I tried to install.
I downloaded all software from eDelivery.
HCM 9.1, PTOOLS 8.52, Oracle 11g 64 bit, Oracle Client 32 bit.
First Try:
Install on windows 7 64bit. Everything works fine until first login to the PSFT and all links not working.
Suggestion from Hakan is to apply the patch and gave me a link to the old FTP site. I downloaded the 85209 patch but got password.
Finally I managed to get a customer ID from a friend and downloaded Patch 85211 and applied. But got java error so I scrapped it.
Anyway, Gasparotto said the environment is not certified and will not fix my problem with the patch.
Second Try:
Installed Virtual Box.
Installed Windows 2008 R2 and applied the SP1.
Installed everything all over again.
Ensured the PTWEBSERVER password similar the username.
Everything works fine but when login to PSFT, again..... links not working and see on the bottom left corner there are some javascript error where they cannot find certain peoplesoft objects..
Just upgraded to IE 9 because I read somewhere IE 8 is not certified.
Tried to login again, no error message and everything looks fine but... links not working.
Logs also looks normal to me.
Does anyone ever encountered similar issues before?
Does this is a normal behaviour before tools patch 85211 being applied ?
Thanks,
aLuNa
My APPSRV Log:
PSSAMSRV.12 (0) [11/03/12 09:04:46](0) PeopleTools Release 8.52 (WinX86) starting. Tuxedo server is APPSRV(99)/100
PSSAMSRV.12 (0) [11/03/12 09:04:46](0) Cache Directory being used: C:\APPSRV_CONFIG\appserv\HCDMO\CACHE\PSSAMSRV_100\
PSSAMSRV.12 (0) [11/03/12 09:04:46](0) Server started
PSRENSRV.2808 [11/03/12 09:04:49](0) PeopleTools Release 8.52 (WinX86) starting. Tuxedo server is RENGRP(92)/101
PSRENSRV.2808 [11/03/12 09:04:49](3) Switching to new log file C:\APPSRV_CONFIG\appserv\HCDMO\LOGS\PSRENSRV_1103.LOG
PSADMIN.2124 (0) [11/03/12 09:04:52](0) End boot attempt on domain HCDMO
PSAPPSRV.1488 (3) [11/03/12 09:13:16 GetCertificate](3) Returning context. ID=PTWEBSERVER, Lang=ENG, UStreamId=091316_1488.3, Token=PSFT_HR/2012-11-03-02.13.17.193528/PTWEBSERVER/ENG/XxZ3vyJWXF/S1MoQtG2Wox6wGJA=
PSAPPSRV.1488 (5) [11/03/12 09:13:21 GetCertificate](3) Returning context. ID=PTWEBSERVER, Lang=ENG, UStreamId=091321_1488.5, Token=PSFT_HR/2012-11-03-02.13.22.193632/PTWEBSERVER/ENG/pS6ec6pIAJJSYc1oOWcNYiR0UFQ=
PSAPPSRV.1488 (7) [11/03/12 09:13:29 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=091329_1488.7, Token=PSFT_HR/2012-11-03-02.13.30.193285/PS/ENG/3GnOezS6D9PUlzwrjPwqexv4ir0=
PSAPPSRV.1488 (34) [11/03/12 09:18:47 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=091847_1488.34, Token=PSFT_HR/2012-11-03-02.18.48.194158/PS/ENG//oJB5tvSHYNzsmZ2Gs4g2vBLUVs=

alunwawa wrote:
Does anyone ever encountered similar issues before? Yes, I did already see the same, that was when installed the same with 8.52.00 (without Peopletools patch) or without applying the patch project...
Does this is a normal behaviour before tools patch 85211 being applied ?Without patch, you have the error you mentioned. How many time I told that 8.52.03 min. is required, I did not go further, but there was some bugs before which make it not working.
I understand that's rather frustrating for people who wants to jump to Peoplesoft. I don't know SAP, but here you go, Peoplesoft is not a simple toy.
Unfortunately, if you have no access to My Oracle Support to get the Peoplesoft patches, you have no way but work on Peoplesoft OVM (free of use), and to use them on VirtualBox, the Jim's articles are worth to follow.
Nicolas.
PS: @Jim, thanks for the kind words.
My last install guide is quite old now (PT8.50/Linux), even though it did not change very much within the last tools 8.52. But seeing the number of time such questions have asked over here (PT8.52 on Windows), I'm thinking to write one more, that time on Windows.

Purchased Lightroom 5 and Download link not working. Please advise

I have Purchased Lightroom 5 followed the download instructions and Download link not working.
I get a dialog box stating that I have Explorer 4 and I need a later version.
I am in fact running Explorer 10.
Please advise.
Bob Spree
England

Please see http://forums.adobe.com/thread/1229333 where this topic has been discussed.

Links not working correctly in PCUI for CRM

Hi All,
We are implementing mySAP CRM 4.0 through PCUI on Portal
EP6 SP14.
I have integrated the CRM Business Package 60.2 in Portal.
Proper User has been created in the backend and assigned Sales Manager Role both in the portal and in the CRM backend.
We are facing problem of links not working in the CRM Contents. When we click on the links in the CRM Portal Contents ( BSPs) we dont get the desired application opening.
When we click any links in the BSP's ( Activity Links in Opportunity Management BSP ) we get a blank page popped up.
I have the screen shots with me. Any one responding can get the screen shots from me.
Thanks in Advance
Rohit

Rohit,
Have you maintained configuration in (transaction CRMC_BLUEPRINT_C --> Navigation (URL Generation) --> Assign Object Method to Role)? Be sure that the role that you are using is present and ID Page/Service field correctly points to the pcd url for your portal.
When testing, it may be helpful to set parameter CRM_URL_BUFFER_OFF = X on the user profile (SU01) to turn off the url buffer. That way changes made above are immediate.
Best Regards,
Bernard

Web links not working in iPhone calendar notes. Used to work. Ideas?

Web links not working in iPhone calendar notes. Used to work. Ideas?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?

On certain sites (like chats), the shift symbols are not working correctly.

On certain sites (like chats), the shift symbols are not working correctly, but shift+letters works fine. I've tried changing the set keyboard language, as well as the character encoding, but nothing works. I don't have this problem in IE.

Hello there.
Although possibly not related to your problem, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
As for your issue, I'm not sure if this is the case, but there is a little know keyboard shortcut to change the keyboard language on Windows. And it's very annoying, since it's easily triggered. I don't know exactly which one it is, but I think it's CTRL+SHIFT, the ones on the right. I suggest you ask Microsoft for support on this one. Firefox doesn't control keyboard languages.

Why Does Dynamic Link Not Work

I purchased the CS5 Adobe Production Premium. I have been working in Premiere and I have been learning about how to use Dynamic Link. I want to be able to alter clips in After Effects and bring them back and forth into Premiere. When I go to File/ Adobe Dynamic Link/New After Effect Composition, I get this message:
Adobe Dynamic Link Requires Adobe Production Premium.
Since I own production premium, I do not know why I am getting this message. I have reinstalled the CS5 Production Premium Software twice and it still gives me the same message. What can I do to get Dynamic Link Working.

Thank you for the tip. Could you possibly tell me how to deactivate and
then reactivate the suite. I am using a Macbook Pro laptop running OS
10.6.4. I do not even know where to start.
From:   Colin Brougham <[email protected]>
To:     Dan Seanor <[email protected]>
Date:   03/15/2011 09:55 AM
Subject:        Why Does Dynamic Link Not Work
Deactivate the software (not uninstall), and then reactivate the suite.
This often fixes this. You can opt to leave the serial number on the
system; no need to clear it and re-enter it.

Verizon Access Manager Download link not working

Hi,
Verizon Access Manager Download link not working, Following Links
http://www.vzam.net/download/download.aspx?productid=872
http://pcdn2-download.vzw.com/win/7.7/VZAM_7.7.1_2727b-AC30-Web.exe
plz help to download verizon five spot access manager.
thanks
karthirocks

Hi karthirocks! I'm sorry to see you're having any difficulties using these links. I've clicked on both, but had no problems getting pages to launch or in getting the application to download. If this is still a problem for you, please describe the issue you're experiencing. Also, please share the browser version you're using, and if you've enabled any security feature that prevents access to certain secure sites or services. Thanks!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Flash Global Security & Links Not Working?

Hi all,
I am absolutely near some sort of breakdown with my Flash website....I really hope someone can help!
I am building my portfolio website; I'm using Dreamweaver CS3 (on Mac) and inserting Flash animations in the centre of a table in each Dreamweaver page. All was working fine until I built the Contact page animation on Flash last night. I linked in some external websites to my Blog, Flickr and Twitter and also need a button to launch the user's default mail client.
When I tested the animation (CMD+ENTR) in Flash the links appeared to be working, if after a few clicks. I then inserted the Contact animation into the Contact.html page on Dreamweaver and tested it in Safari. A dialogue box came up regarding something about security settings and Flash 8 (makes no sense as I am using Flash 9); and I ended up on the Global Security Setttings panel page on the Adobe website. I selected the entire folder the website is in on my hard drive under "Trust Files in these Locations". Now the ENTIRE website's flash animations are not working. There are links to internal pages of the site (i.e. a link to the "Contact" page in the animaiton on the Home page) which are now not working either. No error messages come up when I test the movie in CS3 either. I have refreshed Safari, restarted the Mac and redone the folder on the Global Security Settings panel. Also loaded the entire website onto a PC this morning, all links not working either.
Actionscript 3 on the Contact page looks like this:
import flash.events.MouseEvent;
//---Blog Button---\\
var getBlog: URLRequest = new URLRequest("http://www.myblogsdomain.com");
Blg_Btn.addEventListener(MouseEvent.CLICK, eClick);
function eClick(event:MouseEvent):void{
navigateToURL(getBlog, "_self");
//---Twitter Button---\\
var getTwitter: URLRequest = new URLRequest("http://www.twitter.com/mydomain");
Twt_Btn.addEventListener(MouseEvent.CLICK, eClick1);
function eClick1(event:MouseEvent):void{
navigateToURL(getTwitter, "_self");
//---Flickr Button---\\
var getFlickr: URLRequest = new URLRequest("http://www.flickr.com/photos/mydomain");
Flkr_Btn.addEventListener(MouseEvent.CLICK, eClick2);
function eClick2(event:MouseEvent):void{
navigateToURL(getFlickr, "_self");
//---Email Button---\\
var getMail: URLRequest = new URLRequest("mailto:[email protected]");
Eml_Btn.addEventListener(MouseEvent.CLICK, eClick3);
function eClick3(event:MouseEvent):void{
navigateToURL(getMail, "_self");
I'm not 100% sure if the e-mail AS3 I set up is correct, but as none of the links are working I can't test it. I cannot provide a link to the website as it isn't uploaded yet, and I don't really want to upload it not working properly.
Any help at all would be gratefully received, I'm really, really on the brink of some sort of breakdown. Thanks.

Thanks Samuel.Wong and Ned Murphy for the information.
I'm not actually sure what happened but my website suddenly started working again today, I think possibly by selecting "Always Allow" on the Global Security Page as well as inserting every individual file as well as the folder under "Trusted Locations" has also done the trick.
The external links appear to work when I test the movie in Flash CS3, but the same warning comes up once the movie is inserted into a Dreamweaver html page and tested in Safari. However I think when the links (all except the email ) appear to be working in Flash then it should be just fine once uploaded onto the server. Many thanks for your advice once again.
Maxx

Timemachine and link not work property...

At home I have 10.4.2 and no digidesign hardware.
Timemachine and link not work property...
I send them: when I use ol algorythm- they caclulating 1 mono file (3 min lengh) about 15 min at dual G5. It is normal? And when I use new algorytm- nothign happen whith file. No result. (1 week it work fine).
Link in matrix not work
And what system I shood to use at studio whith PT?

CRash when change lengh of region whith new algoruthm
Date/Time: 2005-08-24 12:11:29.752 +0400
OS Version: 10.4.2 (Build 8C46)
Report Version: 3
Command: Logic Pro
Path: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Parent: WindowServer [91]
Version: 7.1.0 (7.1.0(877))
Build Version: 1A73
Project Name: LogicPro710_ApplicationData
Source Version: 900001
PID: 288
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x0000007e
Thread 0 Crashed:
0 com.apple.logic.pro      0x0059a8c8 0x1000 + 5871816
1 com.apple.logic.pro      0x0037183c 0x1000 + 3606588
2 com.apple.logic.pro      0x00370000 0x1000 + 3600384
3 com.apple.logic.pro      0x002983b4 0x1000 + 2716596
4 com.apple.logic.pro      0x00298a84 0x1000 + 2718340
5 com.apple.logic.pro      0x00298c28 0x1000 + 2718760
6 com.apple.logic.pro      0x0005e264 0x1000 + 381540
7 com.apple.logic.pro      0x0005c6e0 0x1000 + 374496
8 com.apple.logic.pro      0x002aa538 0x1000 + 2790712
9 com.apple.logic.pro      0x00571e10 0x1000 + 5705232
10 com.apple.logic.pro      0x0016c090 0x1000 + 1486992
11 com.apple.logic.pro      0x0017864c 0x1000 + 1537612
12 com.apple.logic.pro      0x00178ad8 0x1000 + 1538776
13 com.apple.logic.pro      0x0016c150 0x1000 + 1487184
14 com.apple.logic.pro      0x0018e388 0x1000 + 1627016
15 com.apple.logic.pro      0x0018e588 0x1000 + 1627528
16 com.apple.logic.pro      0x0017d0cc 0x1000 + 1556684
17 com.apple.logic.pro      0x00124170 0x1000 + 1192304
18 com.apple.logic.pro      0x002fed40 0x1000 + 3136832
19 com.apple.logic.pro      0x003026a8 0x1000 + 3151528
20 com.apple.logic.pro      0x00300a94 0x1000 + 3144340
21 com.apple.HIToolbox      0x931229f4 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 692
22 com.apple.HIToolbox      0x9312214c SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
23 com.apple.HIToolbox      0x93128ed0 SendEventToEventTarget + 40
24 com.apple.HIToolbox      0x93229ffc SendEventFromMouseDown + 156
25 com.apple.HIToolbox      0x93205998 HandleClickInContent + 368
26 com.apple.HIToolbox      0x93155d6c HandleWindowEvent + 1584
27 com.apple.HIToolbox      0x931655c8 StandardWindowEventHandler + 160
28 com.apple.HIToolbox      0x931229f4 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 692
29 com.apple.HIToolbox      0x9312214c SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
30 com.apple.HIToolbox      0x93128ed0 SendEventToEventTarget + 40
31 com.apple.HIToolbox      0x93229ffc SendEventFromMouseDown + 156
32 com.apple.HIToolbox      0x931b6b08 HandleWindowClick + 572
33 com.apple.HIToolbox      0x931b6560 HandleMouseEvent + 456
34 com.apple.HIToolbox      0x931655bc StandardWindowEventHandler + 148
35 com.apple.HIToolbox      0x931229f4 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 692
36 com.apple.HIToolbox      0x9312214c SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
37 com.apple.HIToolbox      0x93128ed0 SendEventToEventTarget + 40
38 com.apple.HIToolbox      0x931b5530 HandleMouseEventForWindow(OpaqueWindowPtr*, OpaqueEventRef*, unsigned short) + 236
39 com.apple.HIToolbox      0x931b4aa8 HandleMouseEvent(OpaqueEventRef*) + 368
40 com.apple.HIToolbox      0x9312923c ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 496
41 com.apple.HIToolbox      0x93122c44 DispatchEventToHandlers(EventTargetR

External links not work

Hello,
I have a word document that has external links. Text that
links to other page or other url.
When I convert my doc (word document) into a swf using flash
paper 2 the links not work. There are still highlighted but no
linking is taking place.
please help me.
Thanks
Alejandro

I am having the same problem. At first I thought it was
because I had converted an excel file but I tried the same
information from a word document and the links do not work in the
browser or if I view the SWF file separately. Additionally, when I
convert the word file to a pdf none of the hyperlinks to pages or
documents work but the links to email addresses do.

Cannot get symbolic link to work in maverick

i have a symbolic link of my contacts to a removeable hd where the data is kept -- symbolic link to the directory addressbook.
this way, i am able to sync to one source whether i am on my work macpro or home macbook. this method has worked since mountain lion, but no longer works after upgrading to maverick. contact opens with no data -- not a single contact name, zilch, nothing.
is there anything i need to do so maverick and "see" this symbolic link? why is it not working? (i did same with calendar and 3rd-party mail, and those still work). quite puzzling.
thanks.

bump.

Mailbox symbolic links not working

Similar Messages

Maybe you are looking for