Mailboxes in white and inaccessible

Hello. I am having an interesting problem. Two of my mailboxes (and I have approximately 50 with sub-mailboxes below that as well) are whited out. I cannot save any new mail to them. All the other mailboxes are working perfectly. I can see the sub-folders and access those but the actual mailbox is whited out and I cannot drag any new mail into them. It's just these two. Any thoughts?

I have the same problem. I had a few folders unexpectedly turn white and now the emails in those folders have disappeared, but I would like them back. I've poked around and seen really complicated sort of fixes. Would like to both prevent this from happening again and fix what did happen. Please help.

Similar Messages

Where are my photos on the PC after sync with an iphone? I know nobody out there is stupid enough to suggest to me that they are encrypted and inaccessible, right? Seriously? How stupid would Apple corporation have to be to do something like this?

Where are my photos on the PC after synching with an iphone? I know nobody out there is stupid enough to suggest to me that they are encrypted and inaccessible, right? Seriously? How stupid would Apple corporation have to be to do something like this? That would be just as foolish as making my music unusable on the PC...
Okay, Let's assume that Apple is indeed THAT foolish.......How does one get the photos from the phone to the PC and still use them?

The photos are still on your phone, and if enabled in your Photo Stream. They are not automatically transferred to your computer when syncing.
See iOS: Import personal photos and videos from iOS devices to your computer and iCloud: My Photo Stream FAQ
tt2

My iPhone will not allow me to open, receive or send texts. Once I open the messaging app, it turns white and closes. Help?

HELP! My phone won't let me text or call people. I can't open any messages or send messages. It freezes, the screen turns white and then closes.

Andrew, the troubleshooting basics are restart/reset/restore...have you tried any of these things?
The following kb may be uber-basic, but here it is anyway...
http://support.apple.com/kb/HT1430

I have OSX 10.5.7 on my Intel Mac. When I try to login using the correct password the screen goes white and just returns back to the login screen. It does not jiggle like when you enter the wrong password.

I have had a number of issues with my Intel Mac recently and had to reboot using disk utilities, safe mode, OSX recovery, but always come back to the login screen but when I type my password the screen goes white and returns to the login screen. My password is correct and the login does not jiggle as it would if the password was wrong. Please advise,

Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
Briefly, you need to delete the following file:
/var/audit/current
If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
mount -uw /
You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
Next, type the following command:
rm -i /var/audit/current
Press return. You should get the following output:
remove /var/audit/current?
If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
Finally, enter the command:
exit
Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
Credit for this solution to ASC user AnthonyTW.

My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...

My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...

There is nothing wrong with your Dell, it will work fine with any MacbookPro. I have been using Dell displays for over 12 years with many different Mac models. I have two 21" Ultra Sharp displays working side by side to design a Keynote presentation right now.
The issue your having is with the way Keynote takes control of the video output to both displays, it sends the presentation signal to one and the presenter display to the other, this is set up in;
Keynote preferences > Presenter display.
If you want to show a wesite or another app on either display, use application switcher:
press the the command key on the keyboard, then the tab key; a row of applications will show what applications are running, choose which one you want to show. Use command > tab to return to Keynote.

My iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats??

hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
(i correctly got out of dfu mode after the downgrade)
i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.

Anyone have any suggestions? or is everyone else just as clueless as me !

I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from

I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from it. It has worked in the past but I downloaded the update today and photomerge will not work correctly. Any ideas?

hedger,
How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

My iPod Touch 4G's screen has gone white and has lines on the screen. How do I fix it? Help!

Hello everyone,
I've had an iPod Touch 4th generation for a few years now, and, today, for the first time, the screen has gone white and their are vertical lines on it. What happened was I accidentally dropped my iPod Touch on tile and it landed on its back. I tried it out right afterwards to see if it was still working and it seemed like it was perfectly fine. Later on, I got an email from one of my friends, so I slid the email button on the lock screen to see the email. In the email, there was a link to a gif image, so I opened it in Safari. After I was done with it, I closed that tab. I also had a second tab open from earlier, so I wanted to close that tab as well. When I clicked on the button to see all tabs and close one, the screen completely froze. I held on to the on/off button on the top of the iPod, and, after about a minute, the screen switched to a completely white screen with lines on it. I've tried holding onto the on/off button again and it doesn't work. I also tried plugging it into my Windows 7 computer and opening iTunes, but my computer doesn't even recognized it is plugged in. It won't appear under the "computer" section in Windows Explorer, which will allow me to do USB-related tasks with it. iTunes doesn't recognize that it is plugged in either, so I can't do anything like restore the iPod to factory settings. The home button on my iPod hasn't been working for a while so i've always been using the accessibility feature that gives me a home button on the screen. Now that I can't access that, I can't hold down both the on/off button and the home button at the same time. What should I do? Should I send it in to Apple for repairs (which I won't do and would rather buy a new iPod Touch)? I am thinking of just leaving it to, hopefully, have the battery drain and the iPod would die. Then, I could charge it and see what happens. Other than that, i'm just clueless right now and I have no idea what I should do. Please help me!
My iPod Touch is an iPod Touch 4th generation model with 8GB. It is running iOS 5.1.1.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My daughter tried to open a game on her Ipod touch and the screen went white and I can't get it to do ANYTHING...I've tried holding the sleep/wake button and it does NOTHING, still only a white screen.

My daughter tried to play the My Horse game on her Ipod touch that she got for Christmas and when she opened the game it said something about sending "push notifications" and gave the choice of "don't allow" or "ok"...we chose "don't allow". After that the screen went white and now we cannot get the Ipod touch to respond to anything. I tried holding the sleep/wake button to try to restart it and it doesn't seem to work. Any suggestions to get this device working again???

Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If that doesn't work, try a Restore:
From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad.
There's more that you can do. Post back if none of the above solves the problem.
By the way, I always allow "push." That allows the app developer to "push" information to your device rather than waiting for you to ask for it. However, "don't allow" shouldn't cause the problem that you're experiencing.

My iPod wont turn on anymore. I have had my iPod since the end of January of 2012, Last night it shut off on me. It keeps trying to reboot itself, but all it does it show the apple symbol, then the screen goes white and reboots again. I need help. :(

Hi, My name is Cassie.
I bought my iPod off of amazon just around the end of January of this year (2012). Last night I was playing around on my iPod. Listening to pandora, and editing pictures. I got to a picture and clicked edit, and then my iPod shut off. It rebooted itself and seemed to be running as if nothing had happened. I put my music back on and went back to the picture and tried to edit it again. I clicked the edit button and the ipod shut off again. This time, it kept rebooting. It went to the apple symbol to turn on and about thirty seconds, the time it normally takes to turn on, the whole screen went white and then shut off and tried rebooting again. It kept doing this over and over again. After a while, it did eventually stop, but only to a completely white screen. It was like that all night long because I fell asleep. (gave up on it). It is now the afternoon and after I held the lock button and the home button down the screen when off. I let it sit for about a half an hour, then I tried turning it on again. But it still is doing the same thing. I have no idea what I could have done to make it do this. Unfortunalty, I am not home to connect it to my own iTunes, but regaurdless, it wont even connect to the computer. I did have my ipod plugged in the whole time it was rebooting and shutting off last night. It was connected to my wall jack which normally works fine. But even having it plugged into the computer as it is now, its still doing the same thing. I am dissapointed that I might end up loosing everything that I have on it. I have not been able to sync it to my computer to save all the apps and pictures and music I have stored on it. I really do hope I can get some help or advice!
Thank You!!
-Cassie Lawrence

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

In iTunes, my printing is white and the background is black, How do I change it back to white printing on a black background.

In my iTunes store, the printing is white and the background is black and I have forgotten how to change it back to black printing on a white background? I know that it is a simple answer, but right now I cannot think of it.
Also, what is the "other" when you are syncing an ipad in itunes and in my case the other is more than half of my 64Gb. How do I find out what it is and then get rid of it if I want to?
Thanks

Hi gramie47,
Sorry to hear that didn't resolve the issue.
I checked online for issues printing from the Internet, found a couple of things you can try. Most likely it is a setting that needs to be changed in the browser settings, since the printer prints fine from the computer.
From Internet Explorer, go to File, Page setup, Remove check from "Printer background color and images" if checked, or vise versa, to see if that helps.
Here is another document you may take a look at.
Map Images May Not Print Properly When Using Internet Explorer.
If you continue to have issues, contact your Internet Provider for further assistance.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How do I make one part of a picture black and white and rest color?

I am working on new campaign for Vi-spring orange county. I need to take a photograph of a woman with a bare back sitting on a mattress and make part of the picture in black and white and the other part in color. I then need to insert an outline of a spine on top in a bright color. I would really appreciate some help on how to start.

I think what we need is a little more information.
When you say you want to make part of the image black and white, do you want to make certain areas of the image black and white or just do away with certain colors in the photo. You can do a selective color and get rid of all but one color ie. A red rose in a green field, take out all the green in the image and the red in the rose is the only thing that has color. Or you can take out one color and leave the rest of the colors in, so basically the oppsite of what I just explained.
If you want certain sections of a image black and white ie. a room with a bed in it make the whole room black and white and keep the bed in color...you need to look into masking.
If you want to do masking I can find you a tutorial for it, but I need to know if i'm on the right track.

How do i fix my ipod's screen it looks lik black on white and i can barely c the screen.?!

how do i fix my ipod's screen it looks lik black on white and i can barely c the screen.?!

Go to Settings>General>Accessibility and turn of either Invert Colors (iOS 6) or or White on Black (earlier iOSs).

How can I turn a picture black and white and keep some objects in color?

I have seen some pictures that are black and white, and a few objects (flowers, dresses, hair bows, etc) were in their original color. I was told you could do it with Photoshop, but I cannot figure out how. Any advice would be greatly appreciated!

The easiest way to do this (and there are lots of ways) is to create a hue/saturation adjustment layer above your base image. In the dialogue box, push the saturation slider all the way to the left. This will make what you see monochrome. Now select a brush and click on the layer mask next to the layer you just created. When you paint on the mask in black, you will block the desaturation effect of the layer and reveal the original color on the layer below. Paint in white to reverse this effect.
Bob Warren

The screen on my iPod touch is white and won't turn off and on?

I was charging my iPod and forgot about it after a couple days and now my screen is white and won't turn on and off and I held hold button and button on screen for 10 seconds and it didn't do anything. HELP

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Mailboxes in white and inaccessible

Similar Messages

Maybe you are looking for