Mailboxes wont move to Exchange 2013

Im currently attempting to move mailboxes over to Exchange 2013 from 2010. Upon creating the initial migration batch of 34 boxes, 31 failed and 3 system boxes completed. I then attempted to migrated a single mailbox and it completed without errors, however,
the mailbox didnt actually appear to have been moved.
I get 0 Total 0 Synced 0 Finalized and 0 Failed.
When I view the details on the batch, it shows nothing.
Any ideas?

Hi,
It's glade to hear the good news! Thanks for your update.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Similar Messages

Exchange 2013 CAS incorrectly proxying after mailbox move to Exchange 2013

Hi,
I am moving Exchange 2010 mailboxes to Exchange 2013 SP1 in production. When I move 2010 mailbox Outlook, OWA works fine right after the move but ActiveSync (HTTPProxy log shows
on CAS 2013 server that it is still re-directing it to Exchange 2010 CAS servers). Exchange 2013 CAS server ActiveSync takes hours before it starts to see that mailbox is moved to Exchange 2013. I am certain it is not ActiveDirectory replication since all
other clients are working.
This time I move another user this time it did not work for 3.5hrs. I had to reboot Exchange 2013 CAS server after that it worked.
There is must be something that is not refreshing on Exchange 2013 CAS server.
Is there anything I can do right after the move to make it quick, I can not re-start server after every mailbox move. Currently we are in Pilot mode and only moving few
mailboxes at a time.
Thanks,
Raman

Hi,
I am moving Exchange 2010 mailboxes to Exchange 2013 SP1 in production. When I move 2010 mailbox Outlook, OWA works fine right after the move but ActiveSync (HTTPProxy log shows
on CAS 2013 server that it is still re-directing it to Exchange 2010 CAS servers). Exchange 2013 CAS server ActiveSync takes hours before it starts to see that mailbox is moved to Exchange 2013. I am certain it is not ActiveDirectory replication since all
other clients are working.
This time I move another user this time it did not work for 3.5hrs. I had to reboot Exchange 2013 CAS server after that it worked.
There is must be something that is not refreshing on Exchange 2013 CAS server.
Is there anything I can do right after the move to make it quick, I can not re-start server after every mailbox move. Currently we are in Pilot mode and only moving few
mailboxes at a time.
Thanks,
Raman
Does simply recycling the ActiveSync app pool speed things up?
Also, I would recommend installing CU6 instead of SP1.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

What is the best practice on mailbox database size in exchange 2013

Hi,
does anybody have any links to good sites that gives some pros/cons when it comes to the mailbox database sizes in exchange 2013? I've tried to google it - but hasn't found any good answers. I would like to know if I really need more than 5 mailbox databases
or not on my exchange environment.

Hi
As far as I know, 2TB is recommended maximum database size for Exchange 2013 databases.
If you have any feedback on our support, please click
here
Terence Yu
TechNet Community Support

OWA still redirects to Exchange 2007 (legacy) after mailbox-move to Exchange 2013

Hi,
I am in the process of implementing Exchange 2013 in coex with 2007. I am testing now in a copy of the production environment and have installed the Exchange 2007 SP3 RU11 prior to installing Exchange 2013 using the SP1 media.
We use a wildcard certificate and I prepared the Exchange 2007 internal/external URLs for OWA/OAB/etc to use the legacy.domain.com names and in Exchange 2013 I set them all to email.domain.com. Exchange 2013 has Outlook Anywhere configured.
All tests like autodiscover (internally via SCP) run fine and for a new Exchange 2013 mailbox the Outlook and OWA functionality is as expected. A mailbox still on 2007 also connects fine via Outlook and while connecting to OWA (using the htps://email.domain.com/owa
url) also redirects me to https://legacy.domain.com/owa just fine.
HOWEVER: after a successfull mailbox-move from 2007 to 2013 my OWA logon-request STILL get's redirected to the 2007 legacy URL. When I then logon again on the 2007 OWA I get the message that I should connect to the 2013 URL and end-up in a loop.
Anyone any tips where to search?
Many thanks in advance.
Best regards and many thanks in advance, Eric Vegter

This seems to be an outstanding issue.
We just performed a fresh install of Exchange 2013 on a Windows Server 2012 R2 operating system. We're migrating from our existing Exchange 2007 server. At the moment we have everything properly setup in a co-existence state. All we lack is to complete the
migration of our mailboxes from the 2007 DB to the 2013 DB.
In performing the first mailbox move, to test the migration process and make certain mail flows as expected, we noticed this same problem. Before reading through this thread, I was able to assign Full Access to a delegate user and then perform the "Open
Mailbox" feature from a 2013 user's account. This was successful in opening the mailbox within OWA 2013. However, I still could not access the account by simply logging into the Outlook Web App. It would login, then proxy back to OWA 2007 with the message,
"Use the following link to open this mailbox with optimal performance:
http://mail.domainname.com/"
After reading about cycling the OWA app pool, I immediately tried it as a workaround and it worked. It is a little frustrating going about it in this way. Hoping to see more activity on this thread.
-Lorne

Public Folder Mailbox causes database failover Exchange 2013

Hi , we are completing a migration from Exchange 2007 to Exchange 2013. All was going swimmingly until we migrated our legacy public folders. Now every now and again ( once a day generally ) the Exchange Database hosting the Public Folder Mailbox
crashes and fails over to another DAG member.
We are using CU5 and our old 2007 server is offline but not removed from the organization yet.
The error message is as follows :
Event ID 1013
The mailbox with mailboxguid "xxxxxxxxxxxx" caused crash or resource outage on database (GUID="xxxxxxxxxxx")
along with :
Event ID 1001
Microsoft Exchange Server Information Store has encountered an internal logic error. Internal error text is (Unable to apply maintenance GetNonKeyColumnValuesForPrimaryKey-norow, index corruption?) with a call stack of ( at Microsoft.Exchange.Server.Storage.Common.ErrorHelper.AssertRetail(Boolean
assertCondition, String message)
and :
Event ID 1002
Unhandled exception (Microsoft.Exchange.Diagnostics.ExAssertException: ASSERT: Unable to apply maintenance GetNonKeyColumnValuesForPrimaryKey-norow, index corruption?
The Mailbox Guild matches the Public Folder Mailbox GUID and the Database GUID matches the Database where the mailbox is mounted.
The error seems to be the same as this question :
https://social.technet.microsoft.com/Forums/office/en-US/7e823810-29f4-48f2-ad60-37e6ac147d3e/exchange-2013-database-dismounts-unexpectedly
However I'm after a bit more concrete information as to what actually causes this and if an upgrade to CU6 is required. This link appears to suggest moving the mailbox will help. Has anyone else come across this with CU5 and will a mailbox move
correct it ?
http://blogs.technet.com/b/exchange/archive/2014/10/03/those-pesky-lazy-indices.aspx

Hello,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Mailbox migration between two Exchange 2013 servers is horribly slow

Hi,
when migrating mailbox between 2 exchange 2013 servers,it s horribly slow. I have found some articles which describing problems about content indexing and missing AD group. This is not my problem, I have tried solutions but it didn't work. Both exchange
are next to each one, same VLAN, same switch. Just migrating between databases.
When I start batch jobs it is migrating only 1 mailbox at once and speed is really slow (2000 - 3000 mail items per 5 minutes). So mailboxes which have 10GB it's migrating 3 hours. My server is on 1gbps LAN.
I have also checked MsExchangeMailboxReplication.exe.config on both servers:
    MaxActiveMovesPerSourceMDB="20"
    MaxActiveMovesPerTargetMDB="20"
    MaxActiveMovesPerSourceServer="100"
    MaxActiveMovesPerTargetServer="100"
    MaxTotalRequestsPerMRS="100"
Do you have any idea where to look why only 1 mailbox is migrating at once?
Thanks

Hello,
For the reason why only 1 mailbox is migrating at once when you start batch jobs, there is no official articles or blog to explain it.
I recommend you check if the speed is slower when you move a smaller mailbox. If the issue doesn't occur, I recommend you set
the AllowLargeItems parameter.
Here are some articles for your reference.
New-MigrationBatch
http://technet.microsoft.com/en-us/library/jj219166(v=exchg.150).aspx
Exchange 2013 Local Mailbox Moves
http://www.msexchange.org/articles-tutorials/exchange-server-2013/mobility-client-access/exchange-2013-local-mailbox-moves-part1.html
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

How many system mailboxes should be in exchange 2013 after moving from exchange 2010?

Hi, I am moving mailboxes from exchange 2010 to exchange 2013, I noticed that in exchange 2013, besides discovery search mailbox, there are other 5 system mailboxes.(especially, there are 2 x Microsoft Exchange system mailboxes) Please see the pic attached.
Does this look right? thanks

Looks perfectly fine - Why MS decided to name two of the five arbitration mailboxes the same (Microsoft Exchange) is unclear but it is what it is :)
In EMS:
Martina Miskovic

Migrating a mailbox cross forest from exchange 2013 Sp1 to exchange 2010 SP2 Update rollup 8

I can migrate a mailbox fine from exchange 2010 sp2 update rollup 8 to exchange 2013 sp1 or Cu2.
I was testing today migrating cross forest from 2010 sp2 udpate rollup 8 back to exchange 2010 sp2 but I get the below error. Is this even possible? I cannot find any documentation on this scenario yet.
VERBOSE: [21:52:47.622 GMT] New-MoveRequest : The remote server doesn't support client 'casservername.domain.com'
version (14.2.341.0 caps:05FEFF). Missing functionality: 'TenantHint'.
VERBOSE: [21:52:47.637 GMT] New-MoveRequest : Admin Audit Log: Entered Handler:OnComplete.
The remote server doesn't support client 'casservername.domain.com' version (14.2.341.0 caps:05FEFF). Missing functionality: 'TenantHint'.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemotePermanentException
+ FullyQualifiedErrorId : 782D22F0,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest

Hi Steve,
I'm a little confused what you are saying. Here is my understanding:
When you migrate mailboxes from Exchange 2013 back to Exchange 2007, the above error occurs.
If I have misunderstood your concern, please let me know.
For migrating mailboxes back to Exchange 2007, there is a simple and straightforward method. Please use the New-MailboxExportRequest cmdlet to convert all mailboxes into pst files. And then use the Import-Mailbox cmdlet to import all pst files into Exchange
2007.
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Import Exchange 2010 Mailbox Database .edb into Exchange 2013

My Exchange 2010 server recently crashed I am in the process of setting up a new 2013 server. Is it possible to import the .edb file from my old server to the new server to recover the mailboxes?

Hi sapper,
Thank you for your question.
We could not mount the database to new server simply, because all services are still on Exchange 2010. So we could refer to the following link:
Perform disaster recovery by the following link:
https://technet.microsoft.com/en-us/library/dd876880(v=exchg.141).aspx
Migrate Exchange 2010 to Exchange 2013 by the following link:
https://technet.microsoft.com/en-us/library/jj898583(v=exchg.150).aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Failed to Manually Seed the Mailbox Database Copy on Exchange 2013

Hi,
I tried to manually seed the mailbox database copy via exchange shell by run this command
Update-MailboxDatabaseCopy –Identity “DB_name\Server” -sourceserver "Name Server" –DeleteExistingFiles.
However, i got the error message whereas shown below.
A parameter cannot be found that matches parameter name 'identity'.
    + CategoryInfo          : InvalidArgument: (:) [Update-MailboxDatabaseCopy], ParameterBindingException
    + FullyQualifiedErrorId : NamedParameterNotFound,Update-MailboxDatabaseCopy
    + PSComputerName        : XXXX.abc.XXX
Any ideas?

I hope database is in suspended state and not in failed state.
Make sure EMS is running As Administrator.
http://technet.microsoft.com/en-us/library/dd335201(v=exchg.150).aspx
Cheers,
Gulab Prasad,
Technology Consultant
Blog:
www.exchangeranger.com
Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Public Folder Mailbox- Missing Primary Hierarchy Exchange 2013

Hi guys,
I was attempting to create a Public Folder using the Exchange Admin Center but when i tried it came up with the error "Couldn't find the public folder mailbox."
When I went back to check on the Public Folder Mailbox that I had created I noticed that there was no Primary Hierarchy even though Secondary Hierarchy where visible.
Is it Possible to recreate the Primary or change one of the existing Secondaries.
Thanks
A K richardson

Hello,
Is there any update?
Cara Chen
TechNet Community Support

AD/ Mailbox Restore Server 2012/Exchange 2013

So I went to Disable a user today in AD and accidentally Deleted him which killed his Mailbox. I'm trying to restore the user and the mailbox so I figured I'd start with the user:
Tried using the ADRestore tool and one scan found around 115 users. Anyone know how to restore 1 user using that tool? I looked at the AD Recycle Bin posts and I enabled that but nothing is showing up in that container.
Am I going down the right path? Need to restore the user first and then the Mailbox?
Edit: *** just did a rescan using adrestore and nothing is found. Am I hosed???
This topic first appeared in the Spiceworks Community

So I went to Disable a user today in AD and accidentally Deleted him which killed his Mailbox. I'm trying to restore the user and the mailbox so I figured I'd start with the user:
Tried using the ADRestore tool and one scan found around 115 users. Anyone know how to restore 1 user using that tool? I looked at the AD Recycle Bin posts and I enabled that but nothing is showing up in that container.
Am I going down the right path? Need to restore the user first and then the Mailbox?
Edit: *** just did a rescan using adrestore and nothing is found. Am I hosed???
This topic first appeared in the Spiceworks Community

Move mailboxes and public folders from exchange 2007 to Exchange 2013

1. How do i move mailboxes from exchange 2007 to exchange 2013. I have more than 1000 mailboxes.
What is the correct way to migrate. do i need to move a single mailbox. During migration do the mailboxes get corrupted
2. I want to move public folders from Exchange 2007 to Exchange 2013.
I ran powershell commands and got these results please do guide me how to move to exchange 2013.and what are the shell commands
Get-publicfolder
Name Parent Path
IPM_SUBTREE
Get-publicfolder | select AdminDisplayName,FolderPath
AdminDisplayName FolderPath
Get-PublicFolderStatistics | select AdminDisplayName,FolderPath
AdminDisplayName FolderPath
exchangeV1 schema-root\microsoft\exchangeV1
Internet Newsgroups Internet Newsgroups
Get-PublicFolder -Recurse | fl name,replicas > c:\publicfolder.txt
Name : IPM_SUBTREE
Replicas : {}
Name : Internet Newsgroups
Replicas : {MAIL\Public Folder Storage\Public Folder Database}

I have started moving mailboxes , i have tried moving few individual mailboxes to see how things go
MAIL is my exchange 2007 and MAIL1 is my exchange 2013, please do refer the below result
PS] C:\Windows\system32>Get-MailboxDatabase -server mail
Name                           Server          Recovery
ReplicationType
Mailbox Database               MAIL            False           None
[PS] C:\Windows\system32>Get-MailboxDatabase -server mail1
Name                           Server          Recovery
ReplicationType
Mailbox Database 1460777952    MAIL1           False           None
[PS] C:\Windows\system32>New-MoveRequest -Identity '[email protected]' -TargetDatabase "Mailbox Database 1460777952"
DisplayName               StatusDetail              TotalMailboxSize
TotalArchiveSize         PercentComplete
[email protected]          Queued                    363.6 MB (381,217,115 ...
0

Exchange 2013 shell mailbox move requests showing up on 2010 hub server

We're in the process of migrating from exchange 2010 to 2013. All servers are patched and up to date. We have two 2010 CASs (one for external OWA use only) and a mailbox cluster. Our exchange 2013 setup is almost a mirror with the exceptions of how the exchange
server roles have changed.
Any new-moverequest commands entered from the either of our exchange 2013 CAS servers fail to show up in the EAC/recipients/migration page.
If the local move request is done in the EAC the batch(es) show up just fine.
The more perplexing part is: while I was going through a 2010 hub (looking for a different issue) I noticed ALL the batches/mailbox moves that weren't showing up in the 2013 EAC were listed in the 2010 move request section.
I can't get any info on the moves in the 2010 console (because they're 2013 jobs) but i can get statistics and such from a 2013 shell.
any ideas?

Are you running ex2013SP1 CU6? Can you try to update n check?
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Moving mailbox from exchange 2013 back to exchange 2007 ..

Hi Guys,
I recently configured configured co-existence between exchange 2007 and exchange 2013. I moved a pilot user from exchange 2007 to exchange 2013 and now the user has issues receiving mails.
I am trying to move the user back to 2007 pending the resolution of the issue. The move status says completed but the mailbox remains in the exchange 2013 environment.
I need to return the user to an exchange 2007 mailbox database ..any ideas on what I am missing.
Thanx guys ..
~Richard
..forever is just a minute away*

Hi Richard,
Please move your mailbox from Exchange 2013 to 2007 from the Exchange 2013 admin center (EAC) and the Exchange Management Shell instead of EMC in Exchange 2007.
Then check whether the issue persists. If possible, please provide more error logs for further analysis.
Regards,
Winnie Liang
TechNet Community Support

Mailboxes wont move to Exchange 2013

Similar Messages

Maybe you are looking for