Mailflow Problem After Migrating Mailbox From 2007 to 2013

I thought I was at the point of migrating our mailboxes from 2007 to 2013. I had created a new test mailbox on the 2013 server and changed all the DNS and virtual directories for the legacy on the 2007 server and was able to successfully send mail
to the test mailbox out and in both internally and externally. Then I migrated my first mailbox from 2007 to 2013 and things went south.
I CAN NOT:
Send e-mail from a mailbox on the 2007 server to the migrated mailbox on the 2013 server.
Send e-mail from migrated mailbox to external e-mail address.
I CAN:
Send e-mail from the migrated mailbox to a 2007 mailbox and the test mailbox on the 2013 server.
Send e-mail from the internet to the migrated mailbox and the 2013 test mailbox.
I unfortunately am running Exchange 2013 with CU6 (I am already aware of the activesync issue and delegation crash issue but saw the info too late).
Suggestions please!!

Hi,
Before going further, I'd like to ask the following questions to troubleshoot the issue:
1. Could you send email from 2007 mailbox to the test mailbox on 2013 server?
2. Did you get any NDR message when sending email to the migrated mailbox failed?
In addition, I recommend you try the following methods to find out the root cause:
1. Try to use message tracking tool in exchange 2007 server ,it will help us to find the email which was sent to the migrated mailbox .
2. Run the following command to check the permission groups of the receive connector:
Get-Receiveconnector |fl Name,PermissionGroups,Exchangeversion
Best regards,
Niko Cheng
TechNet Community Support

Similar Messages

Migrated mailbox from 2007 to 2013 now unable to connect to Samsung S4

I'm in the process of migrating from 2007 to 2013.
I have moved successfully a several mailbox's from Ex2007 to Ex2013. Currently, all the EAS policies reside on the 2007 server and I have been successful reconnecting all the smartphones so far.
However, I have a Samsung S4 that is refusing to connect. Any ideas what I need to do?
Penny Miller
PennyM

I checked the phone settings in his OWA account and it is blank. How can I add it in?
Penny
PennyM

Problems after migrating application from 10.1.2 to 10.1.3

Hi,
I am encountering the following error while executing the application after migrating it from Jdeveloper10.1.2 to JDeveloper10.1.3. Could you please help me in this regard..
NOTIFICATION J2EE JSP0008 Unable to dispatch JSP Page : java.lang.NullPointerException
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:60)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:416)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:478)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:401)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:629)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
     at java.lang.Thread.run(Thread.java:595)
Message was edited by:
user491067

Do you have the problem with all JSP pages, or only a few of them ?
Does it happen in the Embedded OC4J only ?
Could you try to deploy your application in the Standalone OC4J and test it from there ?
I had a similar issue where the Embedded OC4J was unnable to run big JSP pages.
There was no problem with the Standalone OC4J.
Hope this helps,
Didier.

Migrating mailboxes from 2010 to 2013

I have tried to migrate a mailbox between forest from Exchange 2010 to Exchange 2013 but when I run the new-moverequest on Exchange 2013 I get the following error
RemoteLegacy moves must involve Exchange 2010 or lower versions only.
Remote Moverequest dosn't work (The call to ‘https://mail.com/EWS/mrsproxy.svc’ failed. Error details: Could not establish trust relationship for the SSL/TLS secure channel with authority ‘mail.com’. –>
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. –> The remote certificate is invalid according to the validation procedure.)
Can i use RemoteLegacy moves, or only Remote?
Thanks.

When migrating mailboxes from Exchange 2010 to Exchange 2013, a Remote Moverequest must
be used.
Example:
$Cred = Get-Credential (source\account)
New-MoveRequest -Identity [email protected] -Remote
-RemoteHostName mail.sourcedomain.com -RemoteCredential $Cred -TargetDeliveryDomain targetdomain.com
So with the above example, the certificate installed on the source server must include the name mail.sourcedomain.com and target server must trust the certificate.
Martina Miskovic

2 Problems after migration Project Server 2007 to 2010

Hi Everyone!!
I have 2 issues after migrate MS Project Server 2007 to Project Server 2010, in fact i had a lot issues, but i can solve almost all, so after solve all issues, just is pendings 2 issues very rare:
Backgrounds:
Migrated from: Windows Server 2008R2 - SQL Server 2008 R2 - Proejct Server 2007 with WSS 3.0 - All updates are up to date (CU is up to date) and all platform is ok
To: Windows Server 2008R2 - SQL Server 2008 R2 - Project Server 2010 SP2 - SharePoint Server 2010 SP2 - All updates are up to date (CU is up to date) and all platform is ok
3 Servers in the Farm, ----> 1WFE-1WAPP-1DB
Issues:
In the Project Center, some migrate Project don't show the icon with image about project documents, risk and issues although that project effectively have documents , risk and issues
In "Server Settings" , in section "Operational Policies" in "Project Sites" almost all projects don't show the URL with Project Site
For the issues 1 and 2, i tried some things:
Re publish all projects (approx 700 projects) with a script via PowerShell available in technet
Run the Wizard Again
Rebuild Solution
Restart the all Servers in the Farm
Restart Services ----> IIS - Project EventService - ProjectQueue - SharePoint Timer
and i can't solve it yet!!!
Please Any Ideas?
Erick Gutiérrez PMI Membership #ID 2089740 MTCS - Microsoft Project Server Managing Projects

Have you restored content DB successfully?
for point 2 have you performed:
have you synchronized project site under server setting --> operational policies --> Bulk Update Project
Sites
http://pwmather.wordpress.com/2012/10/08/projectserver-2010-bulk-update-project-site-issue-ps2010-msproject-sp2010-sharepoint/
after doing this publish all the project which are having issue it may solve your 1st issue.
You can check if below condition is applies to you (PWA 2007)
You may need to use the WSS site re-linker tool –
now built in to Server Settings in PWA as “Bulk Update Project Sites”. If you have changed URL die to a different port then re-linking should get your sites in order. In upgrade scenarios the “Previous Site Path” Web application might show as a GUID
in the drop down – however it still works and will re-link the sites.
http://technet.microsoft.com/en-us/library/cc197498(v=office.12).aspx
kirtesh

BC4J problems after migrating JDeveloper 9.0.3 - 9.0.4

Hi!
We have application based on BC4J+struts framework. After migrating JDeveloper from 9.0.3 to 9.0.4 we are getting following errors:
JBO-27021: AttributeLoadException
JBO-27022: AttributeLoadException - it seems to be a problem between datatype mapping but on 9.0.3 application worked fine
next we get folowing error when we are inserting a row into the ViewObject. This error does not appear by first inserting but by some of the subsequent calls of insertRow.
java.lang.ArrayIndexOutOfBoundsException
     at oracle.jbo.server.QueryCollection.add(QueryCollection.java:1051)
     at oracle.jbo.server.ViewRowSetImpl.insertRowAtInternal(ViewRowSetImpl.java:1288)
     at oracle.jbo.server.ViewRowSetImpl.insertViewRowAt(ViewRowSetImpl.java:1255)
     at oracle.jbo.server.ViewRowSetIteratorImpl.insertRow(ViewRowSetIteratorImpl.java:1963)
     at oracle.jbo.server.ViewRowSetImpl.insertRow(ViewRowSetImpl.java:1933)
     at oracle.jbo.server.ViewObjectImpl.insertRow(ViewObjectImpl.java:5425)
     at cz.cca.akademie.action.ra9500.AssignActionPriradRole.execute(AssignActionPriradRole.java:23)
     at cz.cca.akademie.action.AssignAction.execute(AssignAction.java:55)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:778)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:536)
Unfortunately I'm not able to say when exactly these errors happen, they appear accidentally. It seems to be a problem with inner state of the ViewObject.
We would be glad for any suggestion
Thanks

CONTINUES...
What is the problem? Something with the ClassLoader of Tomcat 4.1?
I will try with Tomcat 4.0 and post this thread to tomcat-users mailing list!
bye,
Marco.

Migrate only a selection of public folders from 2007 to 2013

Like the subject says- I've been asked to move a small selection only from 2007 to 2013. Essentially out of 4700 public folders they only want to migrate 170. I've always just moved them all and can't think of a way to do this. I can't just delete
the rest of the public folders on 2007- they want to keep them for a short while just in case they've screwed their logic. (They are relying on LastModifiedTime- no access in the last 6 months).
Any Suggestions?
regards
Tony

I agree with Gary that with the MS default process this is true, however if you are open to 3rd party products Lucid8's DigiScope would allow you to open an Offline Copy of the 2007 PF, Filter out what you don't want to copy and then restore the balance
of folders from the offline EDB directly into the 2013 PF.
And of course you could also export the 170 folders to PST and then import to 2013 however that could get a bit ugly...
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003
--> 2007 --> 2010 --> 2013 with Lucid8's
DigiScope

After migrating data from Time Machine, some of my photos are not showing up in iPhoto. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see my photos

After migrating data from Time Machine, some of my photos are not showing up in iPhoto LIbrary view. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see all my photos in 'Library' view, and I can't figure out how these photos seem to be arbitrarily hidden. Help, please.

Try these for the first attempt:
First be sure to have a backup copy of the library if you already don't have one.
OT

Migrate mailboxes from Exchange 2013 to Exchange 2010

Hello,
We have a merger and would like to know if it is possible to migrate mailboxes from Exchange 2013 to Exchange 2010 in a cross-forest scenario.
Or should we first upgrade destination Exchange 2010 to 2013?
Peteris

Hi Peteris,
Based on my tests, we can move mailboxes from Exchange Server 2013 to Exchange server 2010. You can use the Prepare-MoveRequest.ps1 script in the EMS to prepare mailboxes for cross forest moves.
For more information about it, here is a helpful article for your reference.
Prepare mailboxes for cross-forest moves using the Prepare-MoveRequest.ps1 script in the Shell
http://technet.microsoft.com/en-us/library/ee861103(v=exchg.150).aspx
Hope my clarification can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

DL Migration from 2007 to 2013

Guys,
We need to migrate 150 DL's from 2007 to 2013.
2007 DL's are in .companyname<department> format and in 2013 special characters are not supported
We would like to change the format to DL-companyname....
Is there is script to copy the existing list of DL's including permissions in 2007, recreate new one's in the new format and add the permissions in 2013?
Thanks
D

Hi
Hi Here you go
You can use this one
foreach ($DL in (Get-DistributionGroup -ResultSize Unlimited)) { $owners = Get-ADPermission $DL.identity | ?{$_.User -notlike “*Exchange*” -and $_.User -notlike “S-*” -and $_.User -notlike “*Organization*” -and $_.User -notlike “NT*” -and $_.User -notlike
“*Domain Admins*” -and $_.User -notlike “*Enterprise Admins” -and $_.User -notlike “BUILTIN*” -and $_.User –notlike “*Delegated Setup*”} | %{$_.user.tostring()};Set-DistributionGroup $DL -BypassSecurityGroupManagerCheck -ManagedBy $owners }
Refer below link for more information which has clear cut information
http://exchangeserverinfo.net/2013/12/upgrading-distribution-groups-from-exchange-2007-to-exchange-2013/
http://gallery.technet.microsoft.com/scriptcenter/8c22734a-b237-4bba-ada5-74a49321f159
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Issue in Custom Blog site definition based on SharePoint 2010 blog site definition after migrating the sites to SharePoint 2013 and site collection upgrade

I have created a custom blog site definition using SharePoint 2010 blog site definition with Configuration ID 31 in onet.xml (new value). This was working fine for SharePoint 2010.
We created new SharePoint 2013 farm and deployed the all Custom solutions in
14/15 folders. After migrating the sites to SharePoint 2013 using Content DB approach, site created previously using my custom definition are working fine.
But after running site collection upgrade these sites stop working. When I post a comment then comments not getting listed on post detail page. However comments are getting added to Comments List but
PostTitle column of Comment is not getting populated.
Also, when we create a new site in SharePoint 2013 using my custom blog template then that is also not getting provisioned. default.aspx and look-up between post and comment list are not working.
If any one has faced such issue then please share your findings and any solution to fix this.
Thanks in Advance :)

Hi ,
According to your description, my understanding is that the blog based on custom blog site definition didn’t work correctly after migrating custom blog site definition to SharePoint 2013.
If you customized the Onet.xml file in a previous version's site definition, you should modify some sections in the file to work in the current version, like <BaseTypes> and <ListTemplate> etc. More information, please refer
to the link below:
http://msdn.microsoft.com/en-us/library/office/aa543837(v=office.14).aspx
For that the PostTitle column of Comment is not getting populated, please try to modify the view, then compare the result.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Exchange active sync cannot connect to server after migration mailbox user from exchange 2007 to exchange 2013 coexistence

Hello, everyone, my name is rafl
I have a problem with exchange 2013 active sync.
I have installed exchange 2013 coexistence with legacy exchange 2007, I have to migrate user mailboxes: [email protected] from exchange 2007 to exchange 2013.
but any problem with active sync connection on the mobile device after moving mailbox user. I reconfigure the exchange ActiveSync external connection domain (latest.domain.com) on mobile device replacing legacy exchange ActiveSync external connection domain
(legacy.domain.com)
the process of moving mailboxes successfully without error.
Access OWA for exchange 2007 and exchange 2013 is running normally
access mail from Outlook running normally
Certificate request has been installed and has no problem with it
The OWA virtual directory is configured for internal and external connections and different from the legacy exchange
The autodiscover virtual directory is configured for internal and external connections and different from the legacy exchange
ActiveSync virtual directory is configured for internal and external connections and different from the legacy exchange
user mailboxes are still on exchange 2007 is not problematic.
only problem with Exchange Active Sync on mobile devices, where I set up an email with android, iphone, windows phone. the error message: cannot connect to the server.
but, if I create a new user and create user mailboxes directly in exchange server 2013, ActiveSync can run without error on mobile device, access through OWA, MsOutlook, Outlook Anywhere also run normally.
only the results of user migration from exchange 2007 to exchange 2013 which is troubled with exchange ActiveSync connection.
any ideas for this problem, and what should I check on the exchange server ..?

i have run the activesync test connectivity and get some error :
Testing TCP port 443 on host domain.co.id to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
A network error occurred while communicating with the remote host.
Elapsed Time: 3091 ms.
Testing TCP port 443 on host autodiscover.domain.co.id to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
A network error occurred while communicating with the remote host.
Elapsed Time: 21072 ms.
Testing TCP port 80 on host autodiscover.domain.co.id to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
A network error occurred while communicating with the remote host.
Elapsed Time: 21049 ms.
I have allowed access to port 443 (https) and 80 (http) on the firewall and re-run testconnectivity, but still with the same results. if I enable active sync for users who created directly in Exch 2013 there is no problem with the ActiveSync, just a problem
for users who moved from Exch 2007 to Exch 2013. @Android, iPhone, and Blackberry the error message "cannot connect to the server"

Outlook Users connection issues after Mailbox Migration from 2007 to 2013

Hi,
We have a coexistance between Exchange 2007 SP3 and Exchange 2013 CU7. There is an issue when after migrating the user from exchange 2007 mailbox to exchange 2013, the outlook keeps on prompting for password when it is being launched. Checking the Connection
Status we found that there is a connection to the old 2007 Server and the type is Exchange Public Folder. I have migrated the public folder and checked the Mailbox of the user and found that the DefaultPublicFolderMailbox is set to the 2013 Public Folder Mailbox.
If I check my 2013 MailboxDatabase Properties, It sill shows that PublicFolderDatabase Properties is still pointing to the 2007 Public Folder Database. Any resolution on this?
Another issue is, We set outlook anywhere on the 2013 to use basic authentication, however, when users are migrated to 2013 the Outlook client changes to NTLM. even if we set the outlook to basic to make it work, it still comes back to NTLM after a while.
I did most of the resolutions online to use powershell to make changes to outlook anywhere but no luck. any suggestions is highly appreciated.
Thanks & Regards,
Arthur

Hi,
For the first problem, please check the msExchHomePublicMDB attribute for mailbox database in Exchange 2013, you can check this attribute in ADSIEdit.
If this attribute is pointing to Exchange 2007 public folder database, please set to blank. After that, please restart the information service.
And for the second question, I suggest we open a new case for this issue. In order to avoid confusion and keep track of troubleshooting steps, we usually troubleshoot one
issue per thread in order to find a resolution efficiently.
Thanks for your understanding.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Problems after migration from CS5 to 5.5 with Blackmagic Card

Hello forum,
we have an problem after an optimal migration from cs 5 to 5.5 projects.
different: there is an bm hd extreme 3d card in the system.
We are aware of the issue that there has to switch to BM player an the Timleinl settings to BM
But there is still a problem: we are not able to view the ingested material in the source viewer,
because there is another overlay - form the background or sometheing else - see attached photo.
We add new drivers for graphics/BM and patches for CS 5.5
None of these problems by creating new projects.
Also the applications also hangs after we try to close,
many thanks for your answers - Sven.

No reason to ask the same question twice. Just be aware that there are German forums as well.
Your problem is probably in the BM drivers.

Internet connection problem after migrating from Powerbook G4

After starting up my friend's new Macbook 2ghz for the first time, I migrated everything from his old Powerbook G4. However on starting the machine for the first time, although the Internet Status suggested his Airport connection to his Netgear router was working and that he was connected to the Internet, this was not the case, as the registration info could not be sent to Apple, the time/date wouldn't update and he could not browse or check e-mail.
Initially it occurred to me that perhaps the Netgear router didn't like the fact that the same Network settings (IP address) had been given to the Macbook when it had a different MAC address. However this didn't seem to be the case as I was able to add the new Macbook to the list of trusted devices and turn on Access Control, but this still didn't work
Eventually when I turned off the security settings, so that the password was set to "none", instead of WPA/PSK and then did likewise for the named network on the computer, I was able to get online at long last
However I don't want to leave the wi-fi system without any password protection for obvious reasons. His Netgear router is a newer model than mine and it had a choice of WPA2, and when I tried this and did likewise on the Macbook it was still working. Yet the matter gets more complicated as he also has a PC on the same wi-fi network and this would not accept the WPA2 setting on the router and I could not get online with the PC
I dont understand why WPA2 worked on the Macbook but WPA didn't and I need to find a password setting that works for both computers. I don't really understand the WEP option as the encryption choices are 64 and 128 but there's no 64 on the Macbook. More importantly I don't have the foggiest how to get a desired password, as when you put in a "passphrase' and click "generate" the router produces four different keys which are all decidedly impossible to remember and so totally impractical if you need to use these to log on.
I appreciate that this is a bit of a confusing query but if anyone can offer any assistance., I would be extremely grateful, as after all the time it took me today to suss out actually getting his new Macbook online, I am loathe to mess around without really knowing what I am doing and so I need to find a security option that can be used by the Macbook, his older Powerbook and a PC running Windows XP
With my utmost thanks in advance for any help you can offer, but please bear in mind I'm a bit of a techno-nincompoop so please be gentle with me
Many thanks
Bernard

Thanks a million for bothering to reply, it's very much appreciated. I rarely seem to get much success when I try searching in Apple support but I guess that must be because I choose the wrong search terms.
Since all the equipment is relatively new and quite high spec, I believe I should be able to use the WPA format and it's a matter of finding an arrangement that works with both the PC and the Macs. What I don't understand is why the Macbook appeared to be connected to the internet with a WPA password, but wouldn't in fact get online, until I either changed to no password, or to WPA2?
However I'm extremely grateful to you because those docs all proved well worth reading, if only so I might understand some of the technical gobbledigook (the avoidance of which was one of the principal reasons I became a Mac evangelist in the first place), as the whole password encryption thing has always been a complete mystery to me, hence for my own wi-fi set-up, I long ago settled for hiding the network and turning on the trusted devices access control, just to avoid having to deal with any of this technobabble. However my mate wants people to be able to log on to his network if they turn up with a laptop, but at the same time prevent totally open access to his internet connection to all and sundry, so this is not an option.
What really bugs me is that the interface for the Netgear modem/router (and any other router I've had experience with) never seems to work properly on an Apple, no matter what browser I use and having sold his family on the whole Apple experience, it's usually a bit embarrassing to have to squeeze my mercifully narrow backside into a baby's chair in order to use their PC to resolve any router issues (as the PC is only there for the kids to play games). But invariably it's only by using the browser interface on the PC that all the various options seem to work
Again much appreciate you going to the bother and the fact that there is relevant stuff in the support library leads me to believe I should attempt to find some more details which might resolve the WPA difficulties I've experienced with the new Macbook.
Meanwhile, although I am not so keen on the new glossy screen on the Macbook (I'm amazed you can't have the option of a matt one unless you get a bigger Macbook Pro), you've no idea how envious I am having to set up his new toy when I can't afford one myself. Mind you, the last time I told this bloke that if he wanted decent support for his iPod, he'd have to buy me one, he returned from the US with a 60gb model to match his (sadly pre-video iPods), so perhaps I should make matters more complicated by installing Boot Camp and Windows, so that I have to tell him that I can't offer support over the phone without one of my own
Kind Regards
Bernard
Macbook 13" 2ghz" Mac OS X (10.4.5)
Powerbook G4 1.67mhz 15" Mac OS X (10.4.5)
Powerbook G4 1.67mhz 15" Mac OS X (10.4.5)
Powerbook G4 1.67mhz 15" Mac OS X (10.4.5)

Mailflow Problem After Migrating Mailbox From 2007 to 2013

Similar Messages

Maybe you are looking for