Mailing in process chains

Hello together,
when sending a message e.g. via internet from a process chain the complete job log is added to the message. In some cases the message gets very long and often it is enough to send a short message (e.g. "Error in loading XY").
Is it possible to send messages without the job log?
Kind regards,
Daniel

Hi Daniel,
I hope the following documents ll be useful to u.
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
Hope it helps...let me know
Regards,
R.Ravi

Similar Messages

  • Send the OHD database table load details as mail in Process chain

    Hi,
    We have a requirement that after the data is loaded into Open Hub destination we need to send an email to a list of users.
    The mail should contain the Open hub destination name, Calday, Request No, No of records and the message that the load has ended successfully.
    I know how to send an email in the process chain but how to send the details like Open hub destination name, Calday, Request No, No of records in the mail.
    Please suggest.

    Well we got a little idea:
    We have narrowed the req down to the following logic:
    select REQUID,No of records transferre, and the OHD name from RSBKREQUEST table
    where rsbkrequest-requid  = open hub table request
    Also the open hub table should be first sorted in descending order by request ID
    Now the main issue is:
    How to implement this logic and get the details from RSBKREQUEST table and send these details in the mail body.
    This we want to do in the message which is attached to the Open hub DTP load step of the PC. The message will go if the Open hub load is successful.
    In the message we are able to enter the receipient email address but how to add the above mentioned details.
    Actually we are trying to avoid the ABAP code step.
    Please suggest.
    Edited by: Debanshu Mukherjee on Dec 10, 2010 7:45 PM
    Edited by: Debanshu Mukherjee on Dec 10, 2010 7:46 PM

  • Messages to my mail in process chains

    Hi -
    Can you help me in this reagard.
    I would like to create messages in my process chain.
    Saying that if the infopackage Load in PC fails ..
    A message with "Load failed" has to come to my mail box...
    This i tried on my PC -> select load infopack right click select messages...went to a screen with document and receipiants
    created some document and saved created some receipiants and saved...
    but when the load fails the message is not coming to my mail box.
    So wat i have to do futhur...
    Can any could suggest me...
    This is Urgent..
    Plz .
    Thanks and regards,
    Vishwa.

    Actually I would say the approach you have chosen is wrong. What I mean is that it is better to have successfully completed chains message you for successfull completion, than waiting message for a failed one.
    The reason is simple: If your process chain did not start or if a process has "stuck" and has not timed out then you will not get a failed message back. On the other hand if you use the approach im suggesting, you will note that a successfull completion message is missing and that something went wrong.
    Apart from that in the "send message" properties have you selected in the "recipient type" the sap logon name option? How do you check your inbox after that? Via the SO01 transaction?
    Assign points if usefull
    Regards
    Giorgos

  • SCOT transaction setting for mailing in process chain

    Hai
    Im planning to create the message on the process type in the process chain to get the success or failed.
    During the creation of message, i need to give the recipient-id . But in my system there is no setup for mailing configuration in T-Code:- SCOT.
    I have all the rights of basis consultant. so what are the step i need to do to configure the STMP in SCOT transaction.
    pls let me know
    kumar

    Hai Bhanu
    Thanks alot for  your help.
    Im very happy by seeing you after so many months .
    Actualy im loading data into ODS by process chain. But i need to get the mail for success or fail of process type . For this i think so , i need to create the message on the corresponding process type .
                                                       While creating message i should give the recipient - id . I have new Bw-system. So my basis consultant should configure the mailing gateway in SCOT.
    So what are the steps needs to be do in transcation SCOT.
    pls let me know
    kumar

  • Error when sending message(e-mail) from Process Chain ?

    Hello SDN s,
    How ya all ?
    I scheduled a Process Chain with Message option to send it to (U - INternet Address) email ID but it says some error in sending message. What could be the reason ?
    The following is the Job Log Entries....
    30.06.2006 18:05:53 Job started                                                                          00        516         S    
    30.06.2006 18:05:53 Step 001 started (program RSPROCESS, variant &0000000000261, user ID ALEREMOTE)     00        550         S    
    30.06.2006 18:05:54 Hierarchy/attribute change successfully carried out                                RSM        794         I    
    30.06.2006 18:06:00 Document <PV FOR GETTING MESSAGE THROUGH E-MAIL - SUCCE> could not be sent          SO        654         S    
    30.06.2006 18:06:00 Error when sending message                                                        RSRA2        11         S    
    30.06.2006 18:06:01 Job finished                                                                        00        517         S    
    Thanks !!!
    Best Regards....
    Sankar Kumar
    +91 98403 47141

    Hey yes, in that T.Code all the values are 0. What to do to activate that ????????????
                                                                         Duration   Duration 
                             Completed  Error      In transit Waiting    In transit Waiting  
                                                                             hh:mm      hh:mm                                                                               
    B08(100)                        0          0          0          0                                                                               
    FAX Telefax              0          0          0          0       0:00       0:00
         5  INT Internet             0          0          0          0       0:00       0:00                                                                               
    SMTP              0          0          0                  0:00       0:00                                                                               
    X40 X.400                0          0          0          0       0:00       0:00
            RML R/Mail or            0          0          0          0       0:00       0:00
            PAG                      0          0          0          0       0:00       0:00
            PRT                      0          0          0          0       0:00       0:00
    So, how to solve this issue ? how to send e-mails ? what configuration or settings to be done ?
    could u give the steps to do that ? as i am the only one BW guy here !?
    Thanks !!!
    Best Regards....
    Sankar

  • Un Wanted Mails from Process chains

    Helllo,
    We have four planning chains, we have customized our chains in such way that when ever there is an error in process chain, automatically a mail should be executed and it should deliver to the respective memebers.
    Now our problem is even though the chains are sucessful, we are getting mails with wrong information saying chains got failed.
    Could you please suggest what could be the cause for this.
    Thanks
    Lucky

    Please double check on the message to see if t is set for correct actin ( Successful,error or always).
    If it it correct, remove the scheduling of the process chain and activate and schedule again.
    Hi Vikram,
    I have tried this, it was selected for Successful. I have changed to error then saved, activated and scheduled.
    But, once i come back to the same transaction it's showing the old checks.
    I have tried to change the variant,but still same result. what could be the reason.
    Thanks
    Lucky

  • How can you configure mail settings in process chains?

    HI Experts,
    please let me know how can you configure mail settings in process chains?

    Dear Suman,
    To initiate the mails we first need to have SMTP connection. To check the same go to so00 and try sending mails to ur ID. If is successful it states that u have the SMTP access.
    To create mails to Process chains:
    Right Click on the Process varient select the Create Message in the context menu.
    Select the type of mail i.e for successful, Error, Anyways.
    Then follow the screens.
    Note: The recipient type should be Via Internet.
    Hope this helps u.
    Regards,
    Kishore.Pulla

  • Process chain status shows incorrect status

    When ever i receive bad data requests from R/3, BW pulls the error requests into a separate PSA and pass-thru the good once in another PSA and then into datatarget.
    However the overall status is green for the job/package and the package when executed in ProcessChain does not show an errors. But the errors are not noticed until user notices it in the qyuery.
    How to capture such errors and notified, is their any automation possible? I have setup e-mail on process chain failures but these kind of errors are not captured because the overall status of request is GREEN.
    Here is the status on infopackage.
    Incorrect data records - error requests (total status GREEN)
    Diagnosis
    Data records were recognized as incorrect.
    System response
    The valid records were updated in the data target and can be used in reporting.
    The incorrect records were not written to the data target, but were posted retractively under a new request number in the PSA.
    Procedure
    Check the data in the error requests, correct the errors, and post the error requests.

    Hi Gopikrishna,
    Please check if "Error Handling" in the Update Tab of your Infopackage has been enabled, I guess it is.
    If this has been enabled , then the error recs will be isolated and only the Correct records will be posted into the Data Target. It is the responsibility of the BW Administrator to identify such errored records, correct them and Post it back to the DAta target. Because error handling is used, the Monitor will show Green, as all the error recs have been separated.
    To avoid this, you have to remove Error Handling from the INfopackage, then you will see the Load failing and the Process Step in the process chain would turn RED with the corresponding error messages.
    Regards,
    Praveen.

  • How can we use meta chain in process chains

    hi friends,
      anyone tell me about meta chain in process chains and give me one example.
    thanks,
    sree
    Please search the forum
    Edited by: Pravender on Jun 28, 2010 8:04 PM

    Dear Suman,
    To initiate the mails we first need to have SMTP connection. To check the same go to so00 and try sending mails to ur ID. If is successful it states that u have the SMTP access.
    To create mails to Process chains:
    Right Click on the Process varient select the Create Message in the context menu.
    Select the type of mail i.e for successful, Error, Anyways.
    Then follow the screens.
    Note: The recipient type should be Via Internet.
    Hope this helps u.
    Regards,
    Kishore.Pulla

  • Process Chain and e-mail configuration

    We have configured a process chain e-mail message recipient by keying in the full recipient e-mail address in the message screen.  This works successfully.
    However, we would prefer to use the SAP User ID in the process chain message configuration. (The sap User Id would contain the external e-mail id) 
    Why: Because we do not want to have to reconfigure the process chain every time a user or an e-mail changes.  We would like to use a generic user in the process chain configuration, and then only change the generic user e-mail when changes occur.
    When trying to use the sap user id in the process chain no mail message is received.
    We would like to seek input from folks in this forum who may have worked with a similar scenario and have developed a solution, or could provide suggestions on how to make this work.
    Thanks in Advance

    Barbara,
              Mine all work fine on WLS or Jserve, maybe you should include a code snippet??
              Barbara Singer wrote:
              > Hello:
              >
              > We have some simple servlets that need to process forms and bundle this
              > information up in a SMTP message. This is very basic stuff but we can not
              > seem to get this to work with WebLogic AppServer 4.51. I've built the
              > sample servlet /examples/servlets/MailServlet and this does not work either.
              > It also throws now exception. I can see it connect to the SMTP server ans
              > send the information but nothing comes through.
              >
              > I also read in your documentation that /utils/sendMail will be a deprecated
              > method in a future release. Is it still supported in 4.51?
              >
              > Any input, sample examples working, etc. is welcome.
              >
              > /bas
              Russell Castagnaro
              Chief Mentor
              SyncTank Solutions
              http://www.synctank.com
              Earth is the cradle of mankind; one does not remain in the cradle forever
              -Tsiolkovsky
              

  • Sending mail to GROUP ID when a process chain fails.

    Hi All,
    Can one suggest me, how to send a failure/success mail to a Group mial id when a process chain fails.
    I am awere about sending mails to individual mail id's when a any process fails or succed. I want to know the group ID creation part & how to tag the same SOCT.
    Thanks in advance.
    BR,
    Kiron.

    hi,
    The Distribution List/Group_id is created in SO23 transaction.
    hope it is helpful to u
    thanks

  • Sending an Alert e-mail on execution of process chain containing ATTACHMENT

    Hi Experts,
    Need your help on the following,
    We have a scenario where system must send an e-mail to the recipients, on the exection of a Process in the Process Chain.
    This mail should contain a specific text file from SAP-Directory(AL11) as ATTACHMENT or the content of file should be directly read in to the mail, anything will work.

    To send an Alert e-mail when the process chain is executed
    you need to create a message setting while creating the process chain.
    Suppose you want to send a mail after execution of DTP
    then just do the following
    right click on the DTP process in the chain and you will get a option to create message.
    you'll be asked when on what condition you want to send message 1Success 2 error 3always. select as per you r requirement
    select that option and a new window will appear
    in the new window press Reciepent button and add recipients of the mail as per you requiremnt
    press back button and save, then press create message button
    here you can enter the text you want to send, other then that message wil send the status and number od records added and transfered , by default.
    hope this solves your problem ..:)

  • Adding mail ids & Removing mail ids from the last step of process chain

    Hi
    Can you please guied me how to do this.
    Adding mail ids & Removing mail ids from the last step of process chain.
    Thanks
    Subbu

    You can refer the following thread.
    email alert for process chain
    Still I would suggest to search the forum. There will be many threads and articles on this which can help you out.

  • Process Chain Mail Alert

    Hi Gurus,
    Could anyone please tell me how to set up a mail alert to a list of receipients in case of Process Chain failure.
    Thanks in advance,
    Best regards,
    KT Varkey

    1. Right Click on the process.
    2. Select Maintain message.
    3. Select message for error or success.
    4. Enter the email address and select via Internet.
    5. Save
    But make sure that your basis team has maintained all email config settings (SMTP) in transaction SCOT.
    Hope it helps.
    Regards

  • E-mail notification about process chains

    Hello friends
    How to go about creating e-mail notifications for Process-chain failures in BI 7.0.  When I tried to right click on the Process Variant and select create Message, It doesnt shows me the screen to add the reciepients, instead it prompts me to with "Insert Send Message"
    Thanks

    Hi,
    Did you check this doc.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
    Regards.

Maybe you are looking for