Mailing Label and Blank Page

Hi,
I created a mailing labels report using Report 10g. When I run the report with format RTF and open it in Word, the first page if great, but then it inserts a blank page, followed by the third page being correct.
Is there any way to delete the blank page?
Thanks in advance.
VC

this might be caused by MS word. check the page settings and the margin settings word assumes when you open the document.
thanks,
ph.

Similar Messages

  • Open e-mail only get blank page and header

    open e-mail and only get blank page and headers please help

    hi thanks for your reply no it's not all that was sent to us we have about 24 and only a few will open properly. i was told it could be something to do with aol pop. our outgoing mail server just says mail. and then our name.

  • Yahoo mail shows only blank page

    Recently, I have a trouble with Yahoo mail (as well as flickr, hosted by Yahoo?)
    Firefox will show only a blank page after log-in (no problem with log-in screen, mail.yahoo.com).
    The same problem also occurs in safe mode.
    I also tried to clear cookie and cache but it did not work.
    The other browsers work fine.
    Would you please suggest me some ideas or solutions about this issue.
    Thank you very much.

    Hello,
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    #Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
    #* In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
    #* In Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    #In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
    #In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    #Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back to us!
    Thank you.

  • Yahoo mail opens with blank page on firefox but ok with safari?

    When accessing my yahoo mail i attempt to open received mail and only get a blank screen.This only happens using Firefox.When i go to my yahoo account on Safari i can open my received mails and read them,no blank page.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • While online, a new firefox page appears with a "new tab" heading and blank page. why?

    I'll be visiting my e-mail I select to read an email then another mozilla firefox session with a blank page and New Tab heading top left corner over the top of my exisiting page I have to close that tab and then it appears again so I close it then when I scroll it appears again and again. Frustrating!

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Assembly of pdfs - "insufficent data for an image" and blank page

    Hello.
    We are using Adobe Livecycle Assembler 8.2 to assemble a set of pdfs uploaded by end-users together with a pdf that our application create. We have been using the assembler and pdf generator for å few years.
    Lately we have had a couple of situations that our custoumer is not very happy with.
    Situation 1:
    Assembly of 5 pdf is sucessful, but when we open the assembled pdf, one page (representing one attachemnt upload by an end-user) is displayed as an blank page. The attachment is correctly displayed in the table of content with a bookmark to the blank page. The first time scrolling over the blank page in Adobe Reader X, a popup with the message "Insufficent data for an image" is shown. Our applications has no knowledge that the assembly is not sucessful, so its difficult to identify the problem. It seems like the pdf is a scanned image (Producer: AXIS 70U Network Document Server). Have also viewed the assembled pdf in another pdf-reader, but still the same blank page and popup.
    Situation 2:
    Assembly of a few pdfs is sucessful, but when we open the assembled pdf, one page (representing one attachemnt upload by an end-user) is displayed as an blank page. So fare same as situation 1. However, the attachment is not displayed in the table of content and no popup is given when scrolling over the blank page representing the attachment, just a blank page.
    I am looking at a way of detecting pdf that would cause these problems (if I can't fix the pdfs). Maybe there is a way (programtically with iText?) to check if the pdf contains fonts and if not, regard it as a scanned image and mark it as problematic (most scanned pdfs are assembled just fine). Earlier on we had another problem when assembly pdfs, we then got an exception "PDFUnsupportedFeatureException: FlateDecode Filter". Our solution was then to use PDF Generator to convert all uploaded pdfs(attachments) to ps, then back to pdf and reassemble. This approch also works in situation 1 and 2. However we have no failing applications with exceptions now... Doing the pdf2ps2pdf for all attachments is very time consuming and not a good solution for our customer.
    Do anybody have a clue what is wrong with our pdfs? Is there a way of solving this when doing the assembly? Any DDX-tags that might do anything nice?
    The data in the pdfs are sensitive information, so I can't attach them to this post. Can send the metadata if requested.
    Any response would be appreciated.

    Haven't seen that error before.  How are you converting the data after the function call if at all, i.e., are you moving to an XSTRING before handing it off to the web app?
    The things I would suggest which may be stating the obvious are:
    - Download the PDF locally after conversion with GUI_DOWNLOAD and check for the error
    - Does the same issue occur with program RSTXPDFT4 or fm RSPO_RETURN_SPOOLJOB or a SAPOffice (direct) conversion?
    - Remove the logo and try and/or take the original logo, reconvert it to BMP and upload it again in SE78
    - What happens if you change the destination device in the call, if anything?
    - Does OSS note 1320163 apply?

  • Sub templates and blank pages

    Hi All,
    I wondering if anyone has solved this issue. I have one base template call template A and mulitple subtemplates let say b,c. Now A can call b or c based on a particular condition if the condition is satisifed. This works very well. However, Since A has these section breaks (cont) for B and C if the condition is not met I get a blank page. Is there any way to suppress this page if the condition is not met? I have made sure that there is no space after the calls to the subtemplates and work with the various breaks on the template A. Any pointers would be most appreciated...
    thanks,
    Matt

    One thing I forgot to add is template A's section before the call has two columns. The calls to the subtemplates B and C only contain 1 column. So, there need to be a section break between A and B/C else the format of the dual column in A is lost.

  • Separate color output and blank pages

    Good morning community,
    I have a little question for you today.
    How can I output a separate color PDF with blank pages included?
    Unfortunately, as I choose separation in the output menu, the chance to include blank pages (usually available in the general menu) disappears.
    Instead, I need to generate a spot color PDF with all the pages, even the blank ones – in order to grant to the final printer the correct imposition.
    Thank you very much,
    Aulica

    thank you rob day, great idea, with just one strategic move.
    the reason why I need a separate pdf consists in "coedition", that is when I work with co-publishers and I work modifying only the plate of the text (in a specific language), that stays on a separate spot black. Therefore the co-publishers ask me to generate the relative spot black pdf.
    Another solution is to put my text in a separate layer, but in this case I receveid layout files from a designer who didn't distinguish correctly art and text into different layers, so the work to separate them now, would be too long.
    However It sounds me strange that It isn't possible to output with blank pages in separate colors...
    Aulica

  • HP 932 XL - new ink and blank pages

    My problem is quite complex - I am a new user of HP 6700. I bought the printer second-handed - it was relatively new though - only 700 pages printed. There were almost used setup inks inside. I printed a test page and it was alright. I figured that everything was OK with the printer and ordered original HP 932 XL.
    When I got it, one thing had disturbed me - when I opened the box I noticed that the cartridge wasn't protected with anything - no safety plastic, no stickers, nothing.  My first question - is  that usual with the 932 ink? My previous printer was HP 3070 and the cartridges were always secured with safety plastic.
    After installing the cartridge, it was recognized as original and full, but when I wanted to print something - blank pages. I've tried printhead cleaning several times and sometimes on those test pages something black had appeared but it was unreadable.
    Then I again installed the almost used setup ink and it printed yet another page with the proper quality. Then again I installed the "new" ink, and nothing. I used almost a third of the new ink for printhead cleaning and still nothing.
    So I wonder - is that a problem with the new cartridge or may that be a problem with the second-hand printer that I bought?

    Hi @pablo12000,
    Welcome to the HP Forums! 
    I am sorry to hear that your new HP 6700 is printing blank pages with your new ink cartridges, but I am happy to help!
    I would recommend going through this guide, Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Officejet 6600 e-All-in-....
    If that does not resolve the issue, and the printer prints fine with the setup cartridges and not the new ones, then it is mostly likely an issue with the new cartridges. Please call our technical support at 800-474-6836 for options for replacing the ink. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
    Hope this clears things up for you, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Missing and blank pages in my .ascm ebook in Adobe Digital Editions

    Hello,
    I am having some trouble with an ebook I just bought on booktopia.com.au
    Some pages don't seem to be loading. It is not just blank white pages, but no page visible at all in some places, just the grey background of Adobe Digital Editions.
    I found this adobe troubleshooting page which seems very promising:
    Blank pages or missing images when you read digital content (Digital Editions)
    yet when I follow the instructions Adobe Reader 7 is not an option to download, even though that is what this page tells me to do. As it is, I have Adobe Reader XI, but since the file I am having trouble with is an .ascm file, not a .pdf, I don't know how Adobe Reader would help at all.
    I am using Windows 8.1 on a PC.
    If anyone could help me get to the bottom of this, I would be very grateful.

    There might be two parts to the answer.  First, from what you saw, you can
    get ebooks to ADE without the ereader attached.  The ereader might not be
    supported by ADE, and because you've 'been through the steps several
    times', I think that is probably the reason.
    Second, the ebook you're attempting to transfer (which is what I'm reading
    into your wording) may be DRM-protected, and may not be transferrable.  You
    can check this by looking at the Item Info of the ebook.  When you're in
    Library mode, put your cursor on the small arrow next to the ebook name.  A
    drop-down menu will appear, and you can choose 'Item Info' from the list.
    Click on that, and a screen will appear showing you where the ebook is and
    the properties assigned by the publisher to it.  If the 'copy' parameter
    says no, then you have your answer.
    Hope this helps!
    ==================

  • Just updated to Safari 5 and blank page

    Hello
    I have just updated via the OSX updater and now Safari 5 is only displaying a blank page... I can see it trying to connect to the website but nothing happens.
    I have Cosmopod plug in installed but even having deleted from the internet plug in folder nothing changes.....
    I have even deleted Safari, redownloaded the OSX Leopard version and reinstalled it but no better results...
    Help !! What shall I do...
    Thanks a lot
    Greg

    HI and Welcome to Apple Discussions...
    Check to see if you have any other plugins or input managers that might be causing the problem.
    Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
    Carolyn

  • Suddenly, I can access my mailbox on AOL Mail but I cannot read anything when I try to open the individual mail. Get blank "page," even though something clearly is there (when accessed vis Explorer or Safari). What's wrong and how do I fix it?

    This is on my desktop PC running Windows XP. Have used Firefox successfully for a couple of years. This problem was first noticed on 1/18/2012.
    Logging off and logging back into AOL does not fix it. Closing and re-opening Firefox does not fix it. Shutting down and rebooting the PC does not fix it.
    Thanks for any help/explanations.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • CS3 Lifecycle PDF form issues opening and blank pages

    I downloaded a PDF form and added text fields, numeric and calculated fields (FormCalc) using Lifecylce in CS3.  I now have CS5 and Lifecycle ES  When I use the original form and input data it calculates and looks fine.  I can open it no issues.  I email it to my clients, some say the fields are blank, some say they get an error opening it, others have no issues.  Do I need to make some sort of changes to the PDF file, or maybe the ones that can't open or see blank don't have the correct version of Reader?
    I can provide the file if necessary

    Everything seems to be in order .....can you send the problem PDF to [email protected] and I will try to reproduce the issue. Please include a description of the issue in the email as there is no corelation between the email and this forum.
    Thanks
    Paul

  • I lost all My Mail its a blank page.  E mail has come to a stop.

    Well this start up again by itself.?

    Did you try deleting your email account from the mail settings? If not, then try that and adding the email account again.

  • 8.1.2 6plus  Facebook stuck on loading icon and blank page

    As the title states, once in a week when I open Facebook all that appears is the loading icon and it stays that way. I can't tap the bottom options either (messages, notifications etc.). If I kill the app/restart the phone and re-open facebook, the same loading icon appears. I have to delete and re-install app in order to use normally again. Anyone else experience this? TIA

    That happens occasionally with the Facebook App. It's probably due to a problem on (or communicating to) the Facebook servers or just a bug in the App. There's not much that you can do about it until Facebook fixes their problems.

Maybe you are looking for