Mailing Problem in Reports Writer 3.0 (URGENT)

Hello,
I 'm facing mailing problem in Reports Writer 3.0.
All Reports files (.rep) are stored on NT Server(in a particular
dir) and I have full permission (on that dir).
After running the report, when I try to send mail then it gives
the following error
REP-4203: Error occurred while sending a mail message.
REP-4221: Cannot access attachment file.
So pls. suggest me.
Thanks
PSR
null

This is the wrong forum for reports issues - particularly for such an old version :-) However, you'll have to write a user exit to do that kind of stuff. And no don't ask me how, it was all too long ago, but there should be a section on that in your manual.

Similar Messages

  • PFD-MAIL Problem with REPORTS 3.0.5

    Hi all!
    Still have a problem with creating a PDF file as mail attachement.
    I installed the latest patch 11 (3.0.5.19) of the oracle runtime and i compiled
    the report with the patch.
    What happend: Still go the error message if i open the pdf in the mail: "operant xc missing ..."
    BUT !! if I create the pdf with the option "FILE" instead of "MAIL" at e.g. c:\test.pdf - its
    without any error!
    So the question is what is the difference beetween the two ways?????
    Have a nice weekend!
    Oli

    Hi all!
    Still have a problem with creating a PDF file as mail attachement.
    I installed the latest patch 11 (3.0.5.19) of the oracle runtime and i compiled
    the report with the patch.
    What happend: Still go the error message if i open the pdf in the mail: "operant xc missing ..."
    BUT !! if I create the pdf with the option "FILE" instead of "MAIL" at e.g. c:\test.pdf - its
    without any error!
    So the question is what is the difference beetween the two ways?????
    Have a nice weekend!
    Oli

  • Problem in  report writer

    I am in the final stages of completing a report in RW that will be exported to Excel. I have formatted the header for by selecting the “Text” button and the “Text to Export” button”. Everything looks great in the export except that I need the report column headings to match up with the excel columns. I found the “Column Text” variable and have tried using it but it is only pulling the text for the first column repeatedly.
    What do I need to do in RW to make to “Column Text” variable pull from column 1 through 8? I am sure this is simple but I am spending too much time searching.

    Adarsh,
    This needs to be in your LD_LIBRARY_PATH (or equivalent depending upon what Unix system you are on). If this file is not part of your installation, then you need to reinstall the product as your installation directory is incomplete.

  • Problem in reports 6i  while using delimiter option.

    Hi,
    I am facing problem in report writer while using delimiter option.
    Report summary
    ==============
    In my report I am having two queries in data model and two different repeating frame for each in layout.
    These quires are called based on the user parameter. That means if user parameter is 1 then query 1 is called and the report is kick off and same for query 2 when user parameter is 2).
    Problem Encountered
    =================
    Both these reports are running fine while using pdf option to generate report .
    While using delimiter option only one of the query is able to generate report (based on which ever is created first and rest will give 0 byte file).
    I have also trapped it while using messages and it is logically flowing fine.
    I think report writer does not support such scenario.
    please expedite on this.
    thankx
    peyush

    Hi,
    There are no such limitations with Reports. If I understand properly, you run the Report twice, in each run, you are trying to execute different query, and you generate two dilimited Reports output files? This should work fine. Try out the latest Reports 6i patch-10 for this. You can even approach Oracle Support with your testcase. FYI, with Reports 6i patch-11, a new feature "dlimited data" is introduced which will give delimited output with a data dump i.e it would not be dependent upon the Reports layout. You can probably try out this new feature also.
    Thanks,
    Rohit Hi Rohit,
    Thanks for the information.
    well I am generating single output file on each run .
    the problem is somewhat funny.
    I have build query2 in data model after query1.
    query 1 is giving me correct output both in .PDF and delimiter version.
    But query2 is giving me 0 byte file for delimiter version although in .PDF it is running fine.
    When I took out query2 to another module it is running fine for both.
    I hope this make sense.
    Moreover if u still not clear about the problem and thinks that u can help me out please send me ur mail id so that I can send you the RDF copy.
    Thanks
    Mohit...

  • Report Writer Missing Data for Cost Center+Investment Internal Order

    Hi Gurus,
    I have met a problem on Report writer. T-code KSBB -> Report for Cost Center Group by Cost Elements in diff months.
    The report can be drilled down to call KSB1 to give line items on the cost element by cost center/group.
    The problem is the drill-down report missed the line items for investment orders. ( Compared with manually use KSB1)
    The overhead internal order line items are fine.
    For example, document 001-Apr:
    Dr. Cost Element 1009                 $900  -- BA 90  Cost Center 90000 Investment order 9001
         Cr. Other cost elements.                  $900
    Document 002-Apr
    Dr. Cost Element 1009                 $800 -- BA90 Cost Center 90000 Overhead order 7001
         Cr. Other cost elements                      $800
    In KSBB report, the cost center group for 90000 in cost element 1009 in Apr only has $800.
    And the drilled down report which called KSB1 has the line item for docuemnt 002.
    However, when I run KSB1 directly, the total amount for cost element 1009 in cost center 90000 is $1700.
    Here is what I checked:
    1. I have my ABAPer checked the KSBB program and KSB1 program to debug them in DEV ( DEV and PRD has the same problem). The different to get the data is that in KSB1, it has selected a value type 11 ( Googled: field name is WRTTP, Down payments as expenses. In program: WRTTP means Statistically Actual ) and 04 ( Googled: Actual True Posting. In program: 04 in WRTTP means Actual posting).
    But in KSBB, it only select 04 when I clicked the drill down report to call KSB1.
    2. I am thinking that the cause was on different types of internal order:
    Overhead internal orders are statistical orders.  Investment orders are actual orders.
    Could you help to throw some light on the problem?
    Thank you very much.
    Emma

    Hi,
    Cost Centre vise Report you can take from KSB1
    Internal Order Vise Report you can take fro KOB1
    Regards,
    Sridhar Sha

  • BEX Report Writer

    Hi Guru's
    Can anyone send me the interview questoins and answers regarding BEX Report Writer this is urgent please,  Advance thanks
    Thanks & regards
    Sunitha

    these threads can be useful:
    Reporting  Interview questions
    Re: answer please...?
    BEx Questions
    Assign points if useful,
    Gili

  • Have a big problem with report. Very urgent please help

    I have a report rep1. When I run the report via batch thru command rwclient to create a file it failed. I got the follwoing error message:
    REP-0177: Error while running in remote server
    Job 1413 is terminated due to connection timeout.
    It does not even try for few seconds before gives this message. I ran some other batch reports whihc took 15 minutes and they were fine.
    So, I stopped running the bad report for the day thinking the report is still not dead. I ran the same rep1 next day I still get the same error message. But this time when I ran I looked at the appserver showjobs (which lists the reports that were running and that already ran). The job number is different But still it fails in 3 seconds with the job number 1413 and connection time out. Can any one tell what might be the problem.
    Any number of times I run this job I get the same job number with same error (all this is only if I run it as batch using rwclient). If I run this as online by calling it from a form it returns the results without any problems.
    Please help. Very urgent.
    Thanks in advance.
    Asha

    You might want to delete the report server .dat file and restart the server and try
    his also could be one of the issues we had seen and fixed in 9.0.2.3. Please ensure you have the latest patch applied
    Thanks
    The Oracle Reports team

  • Problem in oracle report writer installation

    Hi
    I was trying to install oracle report writer in sun box. after I set the term variable. when I run the orainst file its giving the following error
    orainst: cannot determine current directory
    tk2c*.res: No such file or directory
    Supported Terminals are :
    TERM=vt-52 ORACLE_TERM=vt-52
    Can't find resource file
    /./tk2{TERM}.res or
    /./tk2{ORACLE_TERM}.res
    Please set your TERM variable to one of the supported terminals.
    Exiting orainst procedure.
    Ramesh

    Adarsh,
    This needs to be in your LD_LIBRARY_PATH (or equivalent depending upon what Unix system you are on). If this file is not part of your installation, then you need to reinstall the product as your installation directory is incomplete.

  • Problem in starting Report Writer

    When I try to start Report writer with rwbld60, it shows an error
    Error while loading shared libraries: libjava.so : cannot load shared object files: No such file or directory.
    Pl. let me know how to configure java for starting report writer.

    Adarsh,
    This needs to be in your LD_LIBRARY_PATH (or equivalent depending upon what Unix system you are on). If this file is not part of your installation, then you need to reinstall the product as your installation directory is incomplete.

  • Report Painter and Report Writer (URGENT)

    Hi All,
         Please can you send me Step by Step screen shots Configuration document for Report Painter and Report Writer,
    If any body send relavent data i will give reword points,
    Regards,
    TML

    Hi,
    see the below link cfor complete documentaion of report painter.
    http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    Thanks.

  • Report Writer. Urgent Please help.

    Hi Everyone,
    I am new to SAP report writer. I have a question. Prompt response will be greatly appreciated.
    I am trying to display the total franchise sales/Contract Sales/Total units in my Profit and loss report. The stat key figure linked to these fields does not show up any values when the report is executed. Can someone please help me with that?
    Message was edited by:
            Adam King

    Wow Sridhar, that was quick
    Vj

  • Report writer problem

    Hi,
       I have created a report through report writer/Painter(GR51). My query here is to link this report to a transaction code. Could you please suggest me how can I acheive this?
    Thanks in advance.
    Suresh

    Hi Suresh,
    Go to SE93 and select the Transaction with Parameters ( Parameter Transaction)
    Then in the Transaction field give:  START_REPORT
    Skip initial screen
    Screen 0
    In the default value for the parameters give
    D_SREPOVARI-REPORTTYPE  RW
    D_SREPOVARI-REPORT     ( Give your Report Group )
    If you have any doubt pick any report painter tcode and check in SE93.
    Hope this helps.
    Thanks
    Lakshman

  • Many syncing and e-mail problems.

    Hi folks, lots of syncing and e-mail problems here:
    Syncing: My phone won't sync iCal (it tells me my phone is disconnected), my safari bookmarks or my email accounts. I've been through the threads here, tried resetting iSync, tried deleting calendars and resetting to 10 days instead of 30 -- still no luck. For e-mail, initially iTunes saw the e-mail accounts but did not sync theml. I tried the one-time advance settings and now it's not even seeing the accounts and still not syncing them. and for Safari, no luck with the bookmarks at all even thought the check-box is checked.
    Also, the iPhone won't receive e-mail from any of my POP accounts, even the one I set by hand (because none of the settings synced.) I used the same settings that I have on my desktop, but no luck. I use RoadRunner, so I know I can't send off it. But I went to the genius bar today and they told me to just leave the SMTP server field blank and I should be able to receive, but all I get on wi-fi and edge is a message that says, "Cannot Get Mail, the connection to the server "pop-xxxxxx etc" failed." even on my home netowrk, with five bars, it can't seem to connect. (btw, it does seem to be working properly on my .Mac account, but I don't use that account for most of my correspondence.)
    As far as the sync problems, the genius bar told me to reinstall iTunes, which I did with the new update that just came out this evening. Still no luck.
    any thoughts? bum phone? some setting I'm not catching? any help would be appreciated.
    Dave
    Quad G5   Mac OS X (10.4.2)  

    You will find the iPhone will freak out over any kind of perceived data corruption. Calendars seem to the worst for this (windows or mac)
    Test in a new user and try sending info in each direction. If it works - then your phone works fine.
    Other users have reported having to basically copy the contents of their calendars into a sticky or text edit window. delete the calendars and create brand new ones. they then just transfer the data back.

  • Mail problems with Panther

    I'm having difficulties downloading email into my client mail on my IMac. (I use Macmail, through BTinternet, an outside ISP. (Not Mac) The problem arose when I recently sent out a round robin email to a large number of hotels in Italy enquiring about accommodation - it's clear from my webmail account that dozens of them replied with quite large emails, brochuires etc etc etc. When I try to download these into my inbox, the spinning icon continues to spin round before telling me that Port 110 or something cannot accept or send emails or that my mail account has timed out. Any thoughts would be much appreciated. There is no problem with the interent connection, only mail

    I just read what you wrote. So you are talking about Mail. All right. Can you see how big the inbox is in Mail - that is reported at the top of its window. I am asking this to see if you have an overfull inbox, which can cause problems.

  • Report Writer Excel integration

    I have a serious issue here that I am unable to resolve in report writer or painter.
    I want the report to export to excel with some formatting.
    The formatting that I want is that.
    My report has 1 row of profit center which is variablized for user selection, when a user wants to see a report for a certain range of profit centers, he will enter that in the selection criteria, the report comes out looking fine how I want it but when I turn the excel integration on , I want all the profit centers that were selected in the selection screen to appear in a seperate tab in excel..
    So one tab per profit center chosen , How do i do that?
    please help, urgent.
    thanks.

    Hi,
    Use section option,
    Edit--- sections-New section (with profit center range).
    Thanks
    Jagannadh

Maybe you are looking for