Mailing status in RSPCM

Hello
In RSPCM i configured Mail and maintained mail id in the recipent list.
I scheduled it daily and it sends the status information regarding the process chain.
Even if there is no error in the process chain it sends a blank mail.
But i need mail only when any of the process chain has RED Status.
Can some one help me to acheive this?
Thanks in advance
Kind Regards
M.A

Hi Balaji
Thanks for the information.
But i need to do that for every chain.
But i dont want to use that option and i want to configure mail from RSPCM.
I saw a thread that it is possible to configure but i dont have an idea where it can be done.
Thread Fyi...
TA RSPCM "Automatic Notification"
Regards
M.A

Similar Messages

Mail expunge error and old mail switching to new mail status

Everything started when I set to enabled in mail-general-when searching mail boxes: include encrypted pages.
I was looking for a way to seach in the content of the message for the mails.
Then the first error appeared: the mails when I read those mails returned by themselves to the state of unread.
Then I disabled again the optin: mail-general-when searching mail boxes: include encrypted pages,
but the error continued. and all my mails (more than 1200) were set automatically to the "new" mail status each time that I started the mail program.
Now I created a mailbox named "old" when I move the new messages that I have read to that file.
But now the mail program uses the memory constantly.
with out the mail, the computer memory is near 5%, but when I start the mail program and use it constantly, the memory goes to 100% until I receive the mail expunge error.
The machine has 4Ghz ram, and the mail program uses all until I got the error, I am using a G5, dual cpu, 2ghz, mac osx server. There are no other programs using the memory.
1)how can I configure the mail to avoid the expunge error?
2)how I can configure the mail to keep the mails that I just read to an old state (avoiding those to restart their state to "new")?
3)it is possible to do searchs in all the content of the messages?
thanks
Alberto

You’re welcome.
Well, not knowing what the problem really is, and since it apparently started to happen after you changed some settings, I’d try setting up Mail again from scratch and import your mail back afterwards.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, and making sure that there’s enough space available on the startup disk, try this:
1. If you have a .Mac account and .Mac synchronization of Mail data is enabled either in Mail > Preferences > General or in System Preferences > .Mac, disable it before proceeding.
2. Quit Mail if it’s running.
3. In the Finder, go to ~/Library/. Move (not copy) the entire Mail folder out of there, to the Desktop.
4. In the Finder, go to ~/Library/Preferences/. Locate com.apple.mail.plist and move it to the Desktop.
5. Open Mail and set it up again from scratch. If given the option to import existing mailboxes or something like that, don’t. Just enter the account information and check that everything works fine.
6. You’ll have to re-configure all your settings in Mail > Preferences. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
7. If Mail works fine now and you had any messages stored in local mailboxes, do File > Import Mailboxes, choose Mail for Mac OS X as the data format, and follow the instructions to import your mail from the old Mail folder that’s now on the Desktop. Import the Mailboxes folder first, then each of the POP-username@mailserver account folders, if any.
8. If .Mac synchronization of Mail data was enabled at the beginning, enable it again, go to System Preferences > .Mac > Advanced, click Reset Sync Data, and choose the appropriate options to reset the Mail data stored on the .Mac server with the data locally stored on the computer, i.e. sync data must flow from the computer to the .Mac server.
As a result of doing the above, some messages may be duplicated. Andreas Amann’s Mail Scripts has a Remove Duplicates script that you may find useful.
If all is well and you don’t miss anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

Is there any Java Mail API to get the delivery mail status

My requirement is to capture the delivery mail status that is being sent via my application. Is there any Java Mail API or any other way to do this.Kindly guide

Yes, you can use the [UTL_HTTP Package|http://www.oracle.com/pls/db102/to_URL?remark=ranked&urlname=http:%2F%2Fdownload.oracle.com%2Fdocs%2Fcd%2FB19306_01%2Fappdev.102%2Fb14261%2Fpackages.htm%23sthref1930]

How to see E-mail status ?

Hi,
There is one t-code in SAP through tht we can see the e-mail status.It means that we can see the red,green or yellow light wth person e-mail id in that transaction.
I forget but can anybody let me know abt tht transaction ?

hi
I guess the t-code is SBWP.or else .Go to the main sap easy access screen.there you will find a icon on application toolbar called business workplace.click on it.then go to the outbox.You can find the main sent by you in the outbox.You can use SCOT to know the status of the mail

Table for E Mail statuses

Hello Experts,
I am able to see the E Mails statuses in SOST transaction code. Can anyone tell me where these statuses are stored. Is there any way to know the status of an email whether it is reached the receiver or not?
Regards,
sunil.

Hi Sunil,
There is no such table.
However the below link will shed a light on your requirement :-
[Table for E-mail content (ERMS);
Regards
Abhii...

MN05 vs SCOT: How to obtain mail status messages (with SP 8)?

Since we've installed SP 8, we don't receive E-mail status messages anymore.
In MN05 we always had two communication strategies (defined by "Doc Type/Purch. Org/Vendor") :
Vendor 1 (ex.: 123hotmail.com)
Send status/Requested statuts is set to "Return All Statuses"
send statuts/Status by Mail is set to "All Statuses"
SCOT is currently set to "not expecting any receipt confirmation or exceptions".
If we add « hotmail.com » in the domain exception list, our users will receive a status message for everything that is sent to this domain.
But the goal is to receive status message only for the two vendors defnied in the comm. strategy.
Any idea?

I made this test...
In SCOT, I added this address as an exception: 123<at>hotmail.com.
Then in ME9F, I edit my message to the vendor 123<at>hotmail.com... And I receive a receipt confirmation, good.
Then I edit a message to the vendor 789<at>hotmail.com... And I receive a receipt confirmation too, that's the problem...

Can i purge email notification pending mail status

Hi,
EBS Version : 12.1.3
I have lot of pending mail there in workflow notification mailer. Most of the mail status is mail. So that I can't send any new email to anyone. Please advise me Shall I purge pending mail status?
Most of the pending mail from sysadmin . RESET_ERROR_MESSAGE, Shall i cancel this mail?

Salams Azar,
The following note should answer your question:
How To Troubleshoot When Email Notification Responses Are Processed But The Approval Workflow Still Shows In Process (Doc ID 458665.1)
Please also see notes:
Oracle Workflow FAQ (Doc ID 465887.1)
Tracking Workflow Notification Event Messages (Doc ID 433359.1)
Also refer forum search which will give you additional info:
Forum Search
Hope this helps!
Best Regards

Primavera P6 R8.2 TeamMember ( Using E-mail Statusing Service )

Could someone help, how to configure E-Mail Statusing Service in Primavera P6 R8.2.
Primavera P6 R8.2 working is fine.
Create a user for teammember, the teammember also working is fine,
need to configure E-Mail Statusing Service in Primavera P6 R8.2.
Thanks in Advance.

The mail server account doesn't require a password. Is there a recommended way to update the script for the no password case? I have tried both hard coding and not (the password is prompted at the command line - I just hit return)
I also have created a separate java program that is able to send email with the same account and no password without issue.

Repeating messages in System log: com.apple.wikid.mailinglists[######]: mail:status = "list-updated"

Hello
I have an OSX 10.6.8 server and recently noticed the System log keeps repating the same message after 10 mins:
com.apple.wikid.mailinglists[#####]: mail:status = "list-updated"
[#####] = number that changes every event
The server is bound to Active Directory and the only active services are AFP and SMB
Is there a location/way I can check to stop/fix these messages?
Many thanks for your help
Ciao
Carlo

This is part of the wiki server's setup. If you don't want the messages, turn off the wiki (or 'collaboration services' in the web server setup.
Beyond that, there's no harm in the messages. Why do they concern you?

SEND MAIL STATUS - why do I see 3 emails going out when I only sent 1?

I have a weird issue that scares me because I'm afraid I'm contributing to SPAM, because my Mac is haunted or infected. If I send one (1) email to myself, every 2nd or 3rd send (as a test) results in 2 or 3 messages being sent. The status in the bottom left corner says "3 of 3" when there was only one message. Any gurus or priests out there available for an explanation or exorcism? Dan Sullivan

Nope - same thing in both places. Bottom left outgoing mail indicator and also in Activity Monitor... Sorry. Still Weird. Is there a way to test for "viruses" or other stuff I generally don't worry about? Specifically, is there an app I can download or use that would snoop for some kind of internal security issue I'm unaware of?

Email notifications stuck in Mail status

Hi,
The notification mailer is up and running and we receive emails when we run the test. However, when a user goes through the application, lets say the Purchase requisition process, the process completes successfully, we see the notification in his worklist, we see the notification in the wf_notifications table with status of MAIL, but the user does not get the email notification. The email address is defined both on the employee record and on the user record. The background process is running but it doesn't pick up the notification. After a while the notification gets expired.
does anyone have any clue as to why the test notification from the mailer works but we don't get an email when we go thru the requisition process although it completes successfully ?
Any help is appreciated.
Regards
Preeti

There are various aspects to troubleshooting this issue.
Let me explain the mailer architecture in a nutshell and then troubleshooting tips.
1. Notification activity in a workflow process is executed by the engine. The activity makes an entry in WF_NOTIFICATIONS table with appropriate values for RECIPIENT_ROLE, SUBJECT and MAIL_STATUS based on recipient's notification preference.
2. At the same time, an business event is raised for that notification and enqueued on to the WF_DEFERRED queue.
3. The Workflow Deferred Agent Listener dequeues the event, builds a XML message for that notification and enqueues it again to WF_NOTIFICATION_OUT queue.
4. Workflow Notification Mailer polls the WF_NOTIFICATION_OUT queue and when a message arrives, it dequeues it, parses the XML for that notification and builds a MIME message. Sends the MIME message to the intended recipient_role's e-mail address.
In summary the message for e-mail goes like this...
Ntf Activity -> WF_DEFERRED -> WF_NOTIFICATION_OUT -> Notification Mailer Now things to check.
1. Is the Deferred Agent Listener or Deferred Notification Agent Listener running?
2. Is the Notification Mailer running with Correlation ID parameter set to null? Because the mailer could be configured to only process e-mail notifications from a specific Item Type.
3. Is the intended RECIPIENT_ROLE's e-mail address and notification_preference values in WF_ROLES view correct? The email address should be valid and notification preference should be MAIL%.
There is a debug script $FND_TOP/sql/wfmlrdbg.sql. Run this for the given notification id and you will be able to see in which queue the message is stuck.
Hope this helps.

How to find the job and job status from RSPCM

hi all,
suppose we got an error and in rspcm the process was failed.i want to know the status of that particular job.and if any i want to stop that job in SM37.
plz tell me how to find the job and job ststus from RSPCM...and how to stop that job in SM37
thanks,
jack

Hi Jack,
RSPCM: T.Code
This transaction is used to monitor the process chains
First:
here you need to add the process chains into the sheet
Second:
Then you can monitor the process chains in this transaction code
Like you can see the : status ,proces chain ,Last run date ,Last run time ,Log ID
Status : Green when sucessful,Yellow when running & Red when you get errors
Now when yoy click on any of the process chain in RSPCM you will go to the LOG VIEW as you see in RSPC transaction
SM37:T.code
This transaction is used for Job Overview
you can see many options in SM37
like Released,active,cancelled,finished,etc
Just select the ACTIVE jobs and also pass STAR in JOB ID & USER ID
here you can only see the active jobs
Goto Step in toolbar
select the program displayed
then chose option GOTO - Variant in main menu bar
in the variant you can see the job belong to which Process chain
if you want to cancel this job come back to SM37 Display screen
Select the Job and select the JOB DETAILS tab in Tool Bar
Collect the WIP ( Work Permit ID)
Go to SM50 T.code and find the WIP
in Main Menu Bar you find the option Cancel with Core choose this it will cancel the Job
Regards
Hari

SAPconnect Internet Mail Status Problem

I configured BI 7.0 SAPconnect for sending internet email. I receive the mail in outlook just fine. The problem is in the status field. All messages have status of sent. I would like to know what configuration is missing so I can receive status transmitted.
Thank You in advance

Martin,
You can go through the note 1033893 .
It would help you to resolve the issue

Mail won't relinquish default mailer status

Eudora has been my default mailer for many years. Yet after the last Safari update a few days ago, the browser suddenly ignores Eudora's default status although it is clearly checked in Eudora's preferences. Instead, Safari thinks Mail is my default mailer. So I dutifully open Mail (I never use it on this machine) and check its preferences, which mysteriously assign it as default mailer. I change that setting to Eudora. The next time I click an email link in Safari, Mail pops up again as the default mailer. If I check both email client preferences at that point, both are set to be my default mailer even though I changed Mail to NOT be so. I have tried rebuilding Safari's .plist file and emptying Safari's cache, but it still recognizes Mail as the default mailer. I have also tried a Mail .plist reset, but that did not change the behavior.
How can I stop Mail from making itself the default mailer?

I too have a similar problem. It seems that everybody who upgraded from an Exchange IMAP account has no problem setting the priority of their emails. Anyone who created a brand new Exchange account in Apple Mail from scratch, however, is in capable of setting the priority of their emails. I post this because I'm an administrator of the Macs at my school's library, and this is a very irksome problem for some. Please fix soon.

Yahoo read mail status not syncing in Mail App

Hello all.
Perhaps you can help with a problem I'm having with syncing read message status in Mail on my Macbook. I sure the Mail App and an Iphone. When I read a message on the iPhone, the message continues appearing as unread in Mail on the Macbook. If I exit Mail and then restart it, the message then correctly appears as read. If I read the mail on the macbook, its read status does sync up with the iPhone, and the iPhone shows it as read.
I'm using IMAP for Yahoo in the Mail app on the macbook. I have this problem with Mail on Tiger, Snow Leopard, and Lion, with multiple people on multiple macs, so it's not email account, machine, or user related. I don't have this problem with Thunderbird - that syncs read status fine. Only in the Apple Mail App.
Thanks!

Hi Cory,
Is there/will there be a fix?
Your guess is as good as ours (everyone here is just a user like yourself). This problem has been around since December last year (search the Safari forum for 'yahoo business' and you should find a few threads discussing it).
In those threads, responses from Yahoo say the issue is with Apple. Historically, Yahoo has been pretty abysmal when it comes to making their sites compatible with Safari/Macs though so I'd be inclined to take their statement with a small pinch of salt...

Mailing status in RSPCM

Similar Messages

Maybe you are looking for