Mailman and jes

i have installed mailman and jes on solaris 10.it's include identity server and communication server.i have created test10 maillist and sent a message to maillist because mail is not delivery.I checked pipe queue.i saw this error "Failed to create shell input (Permission denied)
^A^ABoundary_(ID_Aivo6PXmS+eY4mCQSs4+CQ)" . i added mailmanwrapper in program list.How could i solve this problem...
thanks..
regards...

"I used communication express". I have no idea what this might mean, nor how it affects "mailman", "mailmanwrapper" or such.
Mailman is something you're trying to integrate into the MTA, right? Communi8cation Express is a mail client. Ther'es really no relationship.
If you're getting errors about permissions, then you need to examine the error carefully, and see what file or directory has wrong ownership or permissions.

Similar Messages

Mailman and Spamassassin

Greetings again,
My mail configuration is humming along nicely, but there is a small matter which irks me somewhat. We run a mailing list for our company so that any mail our customers send to our main e-mail address gets bounced to all our personal accounts.
Since out e-mail address is advertised on our website, spam-blocking is a big consideration, so we've set up set of Spamassassin/Bayes rules which greatly cut down on Spam. Naturally, we've also assembled a comprehensive "whitelist_sender" hash file to make sure nothing from our clients ever gets blocked.
When spam does get through, it gets marked in the subject "<Junk> <Junk>". This dual-marking puzzled me at first, but I realized that mail gets scanned once it arrives on our server and then again as the server delivers it to each e-mail on the mailman list. The problem is, I've occasionally seen list e-mails with the spam marking "<junk>" only appear one in the subject line. To further confuse matters, I've seen them appear on e-mails from people who are whitelisted. Why would a different set of rules apply for the mailing list delivery?
A mailing list mails are from "[email protected]". Does Amavis scan the the "From:" field of the e-mail or the "FROM" envelope header? I've considered adding "localhost" to the whitelist_sender file, but I fear that all e-mails would then go unscanned.
Have other people encountered this situation? Any simple solutions?

Depending on the usage of your server....
You could have amavis discard or bounce the messages before they hit Mailman (if you don't mind the same for your non-mailman mail).
If you look in /etc/amavisd.conf, you'll find a kill_level (default of 22), you can set this to a lower number. Some sites, which prefer aggressive anti-spam protection, will set this to the same level as tag2 (also in the config file).
In this way, no spam which hits the threshold is delivered.
Make sure to configure finalspamdestiny to your preference.
Again, this would effect your non-mailman users- so whether this is viable for you- I don't know.
Jeff

Group Mail, Mailman and archives

Im confused. I have a mailman list I want to migrate to Leopard Server. Id like to let the listers have a wiki. Ive set up the group, and the wiki and I see it. (i have other problems with that but ignoring them for the minute)
Will poste to my mailman list be the mail archive?
If so can I migrate my old archive somewhere to make sure the old data is still searchable.
Or, is a mailman list completely separate from a group mailing list.
Like I said. Im confused.
If this is all explained somewhere please point me. Ive looked for doc and searched - probably not enough.
thanks
Angus

Hi
"It seems that group mail introduced in previous Snow Leopard Server, it's gone. There is mailman, but I don't need a mailing list , just a simple mail grooup functionality. It's impossible to do in Lion Server?"
Actually Group e-mailing was available in previous versions of the Server. It's not impossible to do in Lion Server either. It's just not obvious if you want to use the interface. There's not much documentation regarding this either.
These two threads (you could have searched this for yourself) should have the information you need:
https://discussions.apple.com/thread/3518290?start=0&tstart=0
https://discussions.apple.com/thread/3229060?start=0&tstart=0
There's also a way of doing this using WorkGroup Manager's Info Tab.
You should get into the habit of using the command line on OS X Server - the Terminal application in /Applications/Utilities - as this is the most effective way for you to get what you want, especially with the Mail Service.
The other Server Administration applications (which you may not be aware of?) are available for free download here:
http://support.apple.com/kb/DL1488
You will need Server Admin to initially configure the Mail Service properly. As ever remember to set up DNS Services correctly as everything you want or may want will depend on it.
HTH?
Tony

Another Mailman and virtual domains problem... mailbox does not exist

Hi,
this is yet another thread about virtual domain mailinglist with mailman.
To sum up:
- OpenDirectory account "[email protected]" -> mail delivered
- Deleting this account and creating a mailing-list "test11", opening the admin interface to change the host "server.domain.com" (which is the primary host of the machine, so each mailinglist is created with this host) and replacing it with "virtualdomain.com"
- sending an email to "[email protected]" -> following error:
Jan 18 14:12:23 server postfix/qmgr[74872]: 698E5BF735: from=<[email protected]>, size=691, nrcpt=1 (queue active)
Jan 18 14:12:23 server postfix/pipe[74882]: 698E5BF735: to=<[email protected]>, orig_to=<[email protected]>, relay=cyrus, delay=0.28, delays=0.14/0.01/0/0.13, dsn=5.6.0, status=bounced (data format error. Command output: test11: Mailbox does not exist )
- adding back the OD account "[email protected]" -> mail delivered to inbox (not to mailing-list recipients)
- now if i delete the mailinglist in Server Admin then send an email to "[email protected]" -> following error (seems obvious):
Jan 18 13:18:49 server postfix/lmtp[74275]: A9B7CBF45F: to=<[email protected]>, relay=server.domain.com[/var/imap/socket/lmtp], delay=0.16, delays=0.13/0/0/0.03, dsn=5.1.1, status=bounced (host server.domain.com[/var/imap/socket/lmtp] said: 550-Mailbox unknown. Either there is no mailbox associated with this 550-name or you do not have authorization to see it. 550 5.1.1 User unknown (in reply to RCPT TO command))
IOW, it looks like somehow the mailinglist aliases are being lost somewhere.
Postfix forgets to delivers the incomming mails to Mailman, doesn't it? According to lots of forum searchs it could be forced by using one of those two commands:
sudo /usr/sbin/postalias
sudo /usr/sbin/postmap
Unfortunately I dont know how they work precisely and can't find X.5 accurate information so I hope you can guide me through this step.
Also I don't know how to track the incomming mails at the moment they are dispatched to either an OD account (so it's delivered or generates the 550 error) or a Mailman list (so it's looking for aliases and so on).
Any help will be appreciated.
Config:
- in /etc/postfix/main.cf
virtual_transport = lmtp:unix:/var/imap/socket/lmtp
virtualmailboxdomains = hash:/etc/postfix/virtual_domains
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/virtual-mailman
virtualaliasmaps = hash:/etc/aliases,hash:/var/mailman/data/virtual-mailman
- in /etc/postfix/virtual_domains
virtualdomain.com allow
- in /var/mailman/data/virtual-mailman
# LOOP ADDRESSES START
[email protected] mailman-loop
# LOOP ADDRESSES END
# STANZA START: test11
# CREATED: Sun Jan 18 13:55:03 2009
[email protected] test11
[email protected] test11-admin
[email protected] test11-bounces
[email protected] test11-confirm
[email protected] test11-join
[email protected] test11-leave
[email protected] test11-owner
[email protected] test11-request
[email protected] test11-subscribe
[email protected] test11-unsubscribe
# STANZA END: test11
- in /var/mailman/data/aliases
# The ultimate loop stopper address
mailman-loop: /private/var/mailman/data/owner-bounces.mbox
# STANZA START: mailman
# CREATED: Sun Jan 18 14:11:53 2009
mailman: "|/usr/share/mailman/mail/mailman post mailman"
mailman-admin: "|/usr/share/mailman/mail/mailman admin mailman"
mailman-bounces: "|/usr/share/mailman/mail/mailman bounces mailman"
mailman-confirm: "|/usr/share/mailman/mail/mailman confirm mailman"
mailman-join: "|/usr/share/mailman/mail/mailman join mailman"
mailman-leave: "|/usr/share/mailman/mail/mailman leave mailman"
mailman-owner: "|/usr/share/mailman/mail/mailman owner mailman"
mailman-request: "|/usr/share/mailman/mail/mailman request mailman"
mailman-subscribe: "|/usr/share/mailman/mail/mailman subscribe mailman"
mailman-unsubscribe: "|/usr/share/mailman/mail/mailman unsubscribe mailman"
# STANZA END: mailman
# STANZA START: test11
# CREATED: Sun Jan 18 14:11:53 2009
test11: "|/usr/share/mailman/mail/mailman post test11"
test11-admin: "|/usr/share/mailman/mail/mailman admin test11"
test11-bounces: "|/usr/share/mailman/mail/mailman bounces test11"
test11-confirm: "|/usr/share/mailman/mail/mailman confirm test11"
test11-join: "|/usr/share/mailman/mail/mailman join test11"
test11-leave: "|/usr/share/mailman/mail/mailman leave test11"
test11-owner: "|/usr/share/mailman/mail/mailman owner test11"
test11-request: "|/usr/share/mailman/mail/mailman request test11"
test11-subscribe: "|/usr/share/mailman/mail/mailman subscribe test11"
test11-unsubscribe: "|/usr/share/mailman/mail/mailman unsubscribe test11"
# STANZA END: test11
- in /usr/share/mailman/Mailman/mm_cfg.py
MTA = 'Postfix'
POSTFIXSTYLE_VIRTUALDOMAINS = ['virtualdomain.com','mail.virtualdomain.com']
add_virtualhost('virtualdomain.com', 'mail.virtualdomain.com')

I've finaly solved the problem by myself, mixing postfix-style aliases.
Since it's quite long I wrote a tutorial, it's here:
http://spip.ashorlivs.net/notepad/os-x/article/virtual-host-mailman-w-os-x-serve r
Hope it can help someone else.
Regards,
g.
Message was edited by: ashorlivs

Setup mailinglist for virtual domain with postfix, mailman and Server Admin

Hello everybody!
we have set up a working mailman/postfix configuration for mailing list purposes only on a Tiger Server. What we wanted to do now is to enable another mailinglist for a virtual domain which is hosted (the website) on another Tiger Server in our domain. But everything we tried up to now did lead to a solution. When I send an email to [email protected], the MX of our domain hands the email over to the mailing list server, who seems not to be aware of his obligation to handle that mail. The mailing list server then forwards the mail again to the original MX and so on... It seems like we missed something simple to do in the postfix config.
Things we tried:
* hints from http://www.freebsddiary.org/mailman-virtual-domains.php -- no effect
* hints from http://discussions.apple.com/thread.jspa;jsessionid=aOuiMaZMLAq_Mfqf9S?messageID =1566428 -- no mailing list working anymore
Any hints would be dearly appreciated!
Cheers,
Florian Schneider

I solved the problem myself after getting a better understanding of the postfix documentation on postfix.org.
In detail, I added
to /etc/postfix/virtual:
[email protected] [email protected]
to /etc/postfix/main.cf:
virtualaliasdomains = virtualdomain.com
virtualaliasmaps = hash:/etc/postfix/virtual
then I did
sudo postmap /etc/postfix/virtual
sudo postfix reload
and everything worked fine.
iBook G3 Mac OS X (10.4.6)

SSL certificates and JES 2005Q1

We encountered some issues installing certs on a JES 2005Q1 installation and wanted to get outside input on what we did and our conclusions:
We have a msg store with iMS, admin server, web server for UWC, and directory server installed on an 8-way v880. Following the instructions on installing a self-signed certificate via the cli failed. When we used the Cert Wizard we found that the databases were in DirServerRoot/alias as msg-config-key3.db and msg-config-cert8.db owned by root. Once we copied these files to the MsgRoot/config directory as key3.db and cert8.db, changed the ownership of the three .db files to the msg server user, and made sure the sslpassword.conf file had the correct password all was fine. The problem I have is that it looks like each "application" or "service" might need a cert (directory, iMS, web, admin). Is there a way to get each of these applications to use the same certificate, even if I have to create copies of the .db files? We had installed on self-signed certificate on the admin server and tried to copy it into the MsgRoot/config but the msg software failed to recognize the admin server cert.

Here's what one of my co-workers said, after he figured it out:
The problem was the files cert8.db, cert7.db and key3.db were not correct under /var/opt/SUNWmsgsr/config area.
The soft links u created was with the prefixes "msg-*" and this is no longer required by the messaging server.
The files should be either cert7/cert8.db and key3.db
I have made the correct soft links to /var/opt/mps/serverroot/alias area. The messaging server is running now w/ SSL mode.

JES 2004Q2 and Solaris LDAPclient

hi Folks
I will describe my issue:
I have a server with Solaris 8 and JES 04Q2 i want to use the JES LDAP Server as a Master Ldap Server for others SUN workstations (To have only one password and login for portal, calendar, mail,etc..) I could ran the idsconfig command to setup the LDAP Server for solaris LDAP Clients, but when I try to run the ldapclient command in a client workstation I have the next message:
Failed to find defaultSearchBase for domain my.domain.com
The ldap client that i ran was:
ldapclient init -a proxyDn=cn=proxyagent,ou=profile,o=my.domain.com,o=isp domainName=my.domain.com -a profileName=default -a proxyPassword=mypasswd my_jes_server.my.domain.com:389
I think the problem is an aci or something like.
any help????

We don't get a lot of cases for either OS, but I do know that some are deployed.
Stability should be similar for X86 Solaris as for Sparc. This version has been out for some time.
Linux is newer, and perhaps less tested.
Outlook connector should be the same. We share souce code between all the platforms.

What is different between JES and Java EE SDK ?

Hi
Thank you for reading my post.
can some one tell me what is different between Java EE SDK and JES ?
What i think is:
- Both of them support Java EE 5.0
- Both of them has access manager 7.1
Can we develop application on JES using netbeans IDE ?
What technicall benefits JES bring that Java EE SDK does not?
Thanks

The Java EE SDK is a developer kit that includes Application Server 9 PE,
as well as early access to other technologies and tools related
to Java EE 5 development. It is primarily targeted at developers
for doing development and prototyping -- although you can also
use it in production.
Java Enterprise System is a larger integrated stack of software and
services sold under a subscription model. The current release includes
Application Server 8.2 EE (and is therefore J2EE 1.4 based), but also
includes a large number of other products such as Web Server,
Directory Server, Portal Server, etc. For more details see:
http://www.sun.com/software/javaenterprisesystem
Note that it is an unfortunate co-incidence that the current release
of Java Enterprise System is Java ES 5, which has nothing to do with
Java EE 5!
Yes you can use Netbeans to develop applications for Java ES.
So comparing the two is really comparing apples to oranges. If you
are a developer and want to develop Java EE 5 applications than the
Java EE SDK is likely best for you.
If you are interested in a broader portfolio of software and servcies
including deploying J2SE 1.4 applications than Java ES may be a good
match.
Joe

Video quality difficulties with Vimeo and Youtube sites and with smart phone

Ever since the Vimeo and Youtube sites have changed, it has been pretty difficult to get the video quality I had before. I'm using Final Cut Express to edit, Quicktime Player to resize the video to 640x480 (is too wide when saving FCE project as Quicktime movie), and Jes Deinterlacer to remove all of the jaggies that the original deinterlacing on FCE doesn't fully do (skateboarding video). I'm aware Final Cut Express 4 is a discontinued product, and Apple support over the phone can't help me. The quality is TERRIBLE on my smart phone, and used to be really good before the site changed. The Vimeo app played my videos very clear. I'm using a MyTouch smart phone. I want to know if the quality being bad on mobile is because of the sites being changed, and if there is anything I can do to get the quality I want. I've worked on this the past three weeks, and this is my final option, so any help would be greatly appreciated. Thanks. Here are the steps I'm using to export (still trying more export options in Jes Deinterlacer).
Step 1: In FCE, click "File", "Export", "Quicktime Movie". In "Include:", choose "Audio and Video", "All Markers" for "Markers:", and check box "Make Movie Self-Contained".
Step 2: Open file in QT Player. Click "Window" (at the top between "View" and "Help"), and choose "Show Movie Properties". Click "Video Track", and click "Visual Settings". Change the dimensions (which are supposed to be 720x480 4:3 but the video is stretched). Enter "640 x 480" for "Scaled Size:", then same with "Offset:" Keep "Preserve Aspect Ratio" unchecked, then when finished entering numbers check it (doesn't let you uncheck it which would be best). Check the "High Quality" box if it hasn't already been checked. Close the window, and click "File", and then "Save".
Step 3: Open file in Jes Deinterlacer. In "Input", check box "Reinterlace Chroma", choose "Video range", and check "Remove Jaggies". For "Project", choose "Deinterlace" and "Use Bottom Field". Check "Adaptive", "Local", and "Filter Chroma". In "Output", choose "Video range". Choose "Export", and "Mpeg-4". For "File Format:" choose "MP4", for "Video Format:" choose "H.264", and for "Data Rate:" enter "2000" for "kbits/sec". Leave "Optimized for:" "Download" as is. Choose "640x480 VGA" for "Image Size:", and "Current" for "Frame Rate:". For "Key Frame:" choose "Every", and enter "24" for "frames". Click "Video Options". Leave the "Main" box checked, and check "Baseline" for "Restrict Profile(s) to:". Choose "Best Quality (Multi-pass)" for "Encoding Mode:". Click "Ok". Click "Audio" (since done with "Video"). For "Audio Format:" choose "AAC-LC (Music), for "Data Rate:" choose "320 kbps", for "Channels:" leave as "Stereo", for "Output Sample Rate:" choose "44.100 kHz", and for "Encoding Quality:" choose "Best". Click "Ok" (leave "Streaming" alone).

First, I would do a Search on this forum for "FRAPS." There are several articles with comments on the best workflow and also settings for Import and for Export.
Next, YouTube is trobulesome. First, they re-encode everything and their specs seem to change weekly. It's tough to find out what they want on any given day. I'd go to their site and get the very latest instructions and attempt to duplicate those perfectly, knowing that they might be different tomorrow.
Good luck with this one, and good luck with the FRAPS footage.
Hunt

Mailman + Postfix - User unknown

Hi all, I'm having some trouble installing mailman (who doesn't?) right now.
I tried everything. I followed EXACTLY what is said on our wiki (https://wiki.archlinux.org/index.php/Mailman) but still it's not working.
Actually the only thing that is not working is 'sending an email to the mailing list'. And this is quite important for a mailing list, I guess.
After spending hours trying, here is my current status:
I created a mailing list called pynochio, with [email protected] as the mailing list address.
Postfix reads my /var/lib/mailman/data/virtual-mailman file and applies the mapping. I'm sure about that because I changed the content of virtual-mailman (and then hashed it using postmap command) and the email postfix was trying to authenticate changed. (so there is no permission issue from this side)
But then postfix concludes that the user doesn't exist. Here are fresh logs from journalctl, just for you:
Mar 20 19:59:53 ks3100290 postfix/qmgr[26527]: 128382077C: from=<[email protected]>, size=1775, nrcpt=2 (queue active)
Mar 20 19:59:53 ks3100290 postfix/trivial-rewrite[26562]: warning: do not list domain too.gy in BOTH mydestination and virtual_mailbox_domains
Mar 20 19:59:53 ks3100290 postfix/trivial-rewrite[26562]: warning: do not list domain too.gy in BOTH mydestination and virtual_mailbox_domains
Mar 20 19:59:53 ks3100290 postfix/virtual[26567]: 128382077C: to=<[email protected]>, relay=virtual, delay=0.74, delays=0.65/0.03/0/0.07, dsn=5.1.1, status=bounced (unknown user: "[email protected]")
Mar 20 19:59:53 ks3100290 postfix/virtual[26567]: 128382077C: to=<[email protected]>, relay=virtual, delay=0.78, delays=0.65/0.03/0/0.1, dsn=2.0.0, status=sent (delivered to maildir)
This warning appears because in the tutorial we are said to put `too.gy` (our domain) in mydestination and because in my postfix database inside the `domain` table, `too.gy` is said to be virtual (transport=virtual). I don't know if it should be that way.
My problem is that I don't really know how postfix and mailman are supposed to communicate. Postfix is supposed to let mailman handle things since [email protected] is a list address but it doesn't.
I read some tutorials (on other distribs) and they are using lists.too.gy domain for their lists address (it seems easier) but it looks like there's a better way to do it and in the archlinux mailman documentation, we are not using such subdomain for our lists. So I want to do it the right, archlinux way.
There is `postfix_to_mailman.py` transport script thing but I read it's a bad practice...
Here is the output of `postconf -n` (which respects the mailman tutorial, once again):
alias_database = $alias_maps
alias_maps = hash:/etc/postfix/aliases, hash:/var/lib/mailman/data/aliases
broken_sasl_auth_clients = yes
command_directory = /usr/bin
config_directory = /etc/postfix
daemon_directory = /usr/lib/postfix
data_directory = /var/lib/postfix
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5
html_directory = no
inet_protocols = ipv4
local_recipient_maps = $alias_maps
local_transport = virtual
mail_owner = postfix
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mydestination = localhost, too.gy
mydomain = too.gy
myhostname = mail.too.gy
mynetworks_style = host
myorigin = $mydomain
newaliases_path = /usr/bin/newaliases
queue_directory = /var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relay_recipient_maps = hash:/var/lib/mailman/data/virtual-mailman
sample_directory = /etc/postfix/sample
sendmail_path = /usr/bin/sendmail
setgid_group = postdrop
smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_relay_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_sasl_auth_enable = yes
smtpd_sasl_local_domain = $mydomain
smtpd_sasl_path = /var/run/dovecot/auth-client
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sasl_type = dovecot
smtpd_tls_auth_only = yes
smtpd_tls_cert_file = /etc/ssl/private/server.crt
smtpd_tls_key_file = /etc/ssl/private/server.key
smtpd_tls_loglevel = 1
transport_maps = hash:/etc/postfix/transport
unknown_local_recipient_reject_code = 550
virtual_alias_maps = hash:/etc/postfix/virtual, proxy:mysql:/etc/postfix/virtual_alias_maps.cf, hash:/var/lib/mailman/data/virtual-mailman
virtual_gid_maps = static:5000
virtual_mailbox_base = /home/vmail
virtual_mailbox_domains = proxy:mysql:/etc/postfix/virtual_domains_maps.cf
virtual_mailbox_limit = 512000000
virtual_mailbox_maps = proxy:mysql:/etc/postfix/virtual_mailbox_maps.cf
virtual_minimum_uid = 5000
virtual_transport = virtual
virtual_uid_maps = static:5000
Any help appreciated. I'm on it since 10 hours, I don't want to kill myself.
EDIT: Forgot my `/etc/mailman/mm_cfg.py` >
# -*- python -*-
from Defaults import *
DEFAULT_URL_HOST = 'lists.too.gy'
DEFAULT_EMAIL_HOST = 'too.gy'
MTA = 'Postfix'
VIRTUAL_HOSTS.clear()
add_virtualhost(DEFAULT_URL_HOST, DEFAULT_EMAIL_HOST)
POSTFIX_STYLE_VIRTUAL_DOMAINS = ['too.gy']
DEFAULT_URL_PATTERN = 'http://%s/'
PUBLIC_ARCHIVE_URL = 'http://%(hostname)s/archives/%(listname)s'
MAILMAN_SITE_LIST = 'mailman'
Last edited by toogy (2014-03-20 19:23:23)

AlanNYC wrote:
If I turn off local recipient checking, will I actually get my mail?
Yes, all email properly addressed should be delivered to you without problems.
The line only affects improperly addressed email, in this case allowing them to be accepted instead of rejected.
Since you are running Spamassassin and an IMAP server, I suggest also using the line
luser=[email protected]
which will send all improperly addressed mail to the address specified by "[email protected]". This is what I meant by "catch-all" address.
If you find postfix giving you problems after adding the lines, simply delete them or comment them out by adding a hash mark to the front of the line, e.g.
#localrecipientmaps =
Alternatively, you can simply make no changes and allow the log messages to accumulate. The messages mean that postfix is doing its job by rejecting email addressed to users that don't exist. The above steps allow you to receive mail addressed to [email protected], where "anything" is any string allowed in an email address.
I assume you're testing your changes using a separate email account, but in case you're not: sign up for a free email account with any of a number of free email services (Gmail, Yahoo) and test your postfix install as you make changes using the free account.

Mailman in OS X Server (10.8)?

What happened to Mailman and how can I get it's functionality back into OS X Server?

Mailman has been removed, but it's possible to get it back. Check out this guide:
http://www.livetime.com/mountain-lion-mailman-mailing-list/

Mailman problem

hello
recently i am getting an error on my web page as following
Bug in Mailman version 2.1.5
We're sorry, we hit a bug!
If you would like to help us identify the problem, please email a copy of this page to the webmaster for this site with a description of what happened. Thanks!
Traceback:
Traceback (most recent call last):
File "/usr/share/mailman/scripts/driver", line 68, in run_main
immediate=1)
File "/usr/share/mailman/Mailman/Logging/StampedLogger.py", line 52, in _init_
Logger._init_(self, category, nofail, immediate)
File "/usr/share/mailman/Mailman/Logging/Logger.py", line 49, in _init_
self._getf()
File "/usr/share/mailman/Mailman/Logging/Logger.py", line 67, in _getf
1)
File "/System/Library/Frameworks/Python.framework/Versions/2.3/lib/python2.3/codecs. py", line 566, in open
IOError: [Errno 13] Permission denied: '/private/var/mailman/logs/error'
Can any1 please help me with this..
Thankyou

Hmm. This mail seems to be coming from the cron daemon. It tries to "fire up" gate_news which for some reason fails. gate_news is part of mailman and is used to gateway NNTP (news servers) to mailing lists.
You probably tried to change some configuration options for mailman (through it's webinterface) and activated gate_news. If so, reverse what you did. If not try to remember what you did before the problem started.
Alex

Profit Centres and Distribution Rules

Hi, Is there someone who can help me about a problem with cost accounting?
I've set profit centres, distribution rules (created and linked to profit centres), I've linked accounts to distribution rules so the "profit centre report" shows all the expenses related to each PC/DR. I also can see the table with all the parameters I set. My question is: how can I check (or is it possible to check) if a specific cost (account) is more than the limit I set in the distribution rules? In other terms: If I set 10.000 EUR on DR called "training expenses" with account linked "040001" and then I charge this account with 20.000 EUR; is it possible to have a notification or something in the "profit centre report" or in the "table of PC and DR" who tells: "ehy man, you spent too much!!!" (or at least the possibility to have DR values in the PC report?).
Thanks a lot in advance and sorry about the length of my post.

No but you can use the Budget features of B1 to do something similar. If you turn on Budgeting from the System Initialization>General Settings>Budget You can warn on devations from Budget or block devations from budget, on PO, GRPO and JEs
dan

Problem installing Sun JES 5u1 on OpenSolaris (snv_b77 x86)

We have a new X4600 server dedicated to tests of the latest Sun-related software stack we could get our hands on to build a demo-installation of "the newest" for a customer, so we installed it with OpenSolaris (snv_b77 was the most recent back then).
After doing the needed tests, we decided to see how the Sun JES behaves with a recent Solaris. We have many Sun JES projects (dating back from Portal 6.0 and JES 2003Q4, JES 4 and 5/5u1); and since Solaris 10u2 (6/06) we host them in zones of a "minimalistically" configured server (approx 270 packages).
When I tried to repeat a similar approach with OpenSolaris (snv_b77) and Sun JES 5u1, the Orion(?) installer behaved differently than on Solaris 10u3 or 10u4. In particular, there are less choice options in Directory Server (i.e. no Directory Proxy Server at all), and a dozen lines in High Availability services (HA for this and HA for that, albeit "Unsupported in zones").
The bigger problem is that the installer doesn't succeed in installing some packages (Cacao, mfwk, jdmk) and configuring the products. I could manually register some of the CACAO components and get a working pair of Directory Server and DPS, now I'm fighting with the Application Server.
What's sad, I don't have to do these tricks with any recent Solaris 10 server we've had set up.
The root of the problem seems to be that the system identifies as "SunOS 5.11" and the installer doesn't seem to support that (installation goes on with a stacktrace that classes for 5_11 could not be found). Example:
PSPERR:++++++++++++++++++++++++++ {Missing Resource Exception in the loading of the PkgRelativePaths{Can't find bundle for base name com.sun.entsys.installer.common.resources.PkgRelativePaths5_11, locale en}}
I made a wrapper script for /sbin/uname which replaces "5.11" with "5.10" and linked "Solaris_11" to "Solaris_10" directories in the unpacked distribution, but these steps did not help.
Does anybody know of tricks required to fool the installer to work in "Solaris_10" mode regardless of the system? Changing programs to wrappers, or replacing /etc/release and similar files are okay - the setup is in a zone dedicated to one task.
Or is there a newer Sun JES beta release which does not need such fooling? :)

I had the same problem this evening on b81, and have had the problem in the past but didn't care long enough to look at it. I do care tonight because I need to use B81 with Crossbow, so as I have VNIC support.
I've spent some time figuring it out (thanks to truss + find) and I've found a way that sorts the issue. You need not rename directories (in fact, this will break it in my experience).
NOTE: Seeing as you've mucked around with directories and so on, unzip a fresh copy of JES.
NOTE: Sun probably don't want you to do this and it is unsupported, do so at your own peril.
Run the installer (I've used text mode):
Unable to access a usable display on the remote system. Continue in command-line mode?(Y/N)
Y
Once you say "Y", I've found it goes off creates a directory called /tmp/.entsys_CaChE
Inside this directory you will find the following seemingly relevant files:
./Solaris_x86/.install/config/PPXMLS/Clusters/EntsysCluster_SUNOS_SPARC_5_10.xml
./Solaris_x86/.install/config/PPXMLS/Clusters/EntsysCluster_SUNOS_X86_5_10.xml
./Solaris_x86/.install/config/PPXMLS/Clusters/OrionCluster_SUNOS_SPARC_5_10.xml
./Solaris_x86/.install/config/PPXMLS/Clusters/OrionCluster_SUNOS_X86_5_10.xml
./Solaris_x86/.install/config/com/sun/entsys/installer/common/resources/PkgRelativePaths5_10.properties
In another terminal window, copy the relevant files for your platform to the same file but with 5_11 instead of 5_10
cd /tmp/.entsys_CaChE
cp ./Solaris_x86/.install/config/PPXMLS/Clusters/EntsysCluster_SUNOS_X86_5_10.xml ./Solaris_x86/.install/config/PPXMLS/Clusters/EntsysCluster_SUNOS_X86_5_11.xml
cp ./Solaris_x86/.install/config/PPXMLS/Clusters/OrionCluster_SUNOS_X86_5_10.xml ./Solaris_x86/.install/config/PPXMLS/Clusters/OrionCluster_SUNOS_X86_5_11.xml
cp ./Solaris_x86/.install/config/com/sun/entsys/installer/common/resources/PkgRelativePaths5_10.properties ./Solaris_x86/.install/config/com/sun/entsys/installer/common/resources/PkgRelativePaths5_11.properties
Then continue the installer as normal.
Then you should get to here:
1. Install
2. Start Over
3. Exit Installation
What would you like to do [1] {"<" goes back, "!" exits}?
And if you continue now things are happy:
Java Enterprise System 5
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installation Complete
Software installation has completed successfully. You can view the installation
summary and log by using the choices below. Summary and log files are available
in /var/sadm/install/logs/.
All good!
Regards,
Geoff Ongley
http://unixsysadmin.net/ (shameless plug)

JES & Veritas Cluster Server

Hi All,
By this message i want to share with you my experience with Veritas and JES.
Last week, i configured the Veritas Cluster Server Agent for iPlanet 5.2 to work with JES 6.1. There was problem to bring the ressource group of JES online because the agent is't conpatible with the JES 6, but done somes modification to allow the agent to monitor my JES ressource group.
Firstly :
When bringing the JES ressource group onlin, the VCS Agent search for a file named /etc/msgregistry.inf, this file deasn't exist in JES 6 only in 5.2. to avoid this problem i created an empty file in both nodes using touch :
touch /etc/msgregistry.inf
Secondly :
The old binaries directory sbin on the messaging server was located on the msg-bin and in the new version JES 6 it's located in sbin and to avoid this problem i created a symbolic link like :
ln �s serverroot/sbin serverroot/msg-sbin
Where the serverroot is the full path name to the messaging directory configured on the Veritas Cluster.
I finded this issues only by debugging the Agent scripts, probably you will be faced to other problem, i advice you to just look at the veritas log and try to circumvent the problem.
Enjoy my help.
Mourad.

I don't feel like you've read my response.
It appears you're using the 5.2 cluster agent. You need the new JES cluster agent. It's on the JES CD.
There is no longer an "inf" registry file for it to look at. There is documentation for installing cluster. Please examine and follow.
http://docs.sun.com/app/docs/doc/819-2650/6n4u4dtn1?a=view

Mailman and jes

Similar Messages

Maybe you are looking for