Mailman cannot create new list

In OS X Server 10.4.x, for some reason creating a new list for an existing virtual domain results in "Error: Unknown virtual host: <domain>".
This domain exists and existing lists can be updated, but the creation new list fails. This virtual domain was setup after following the steps indicated in this thread
http://discussions.apple.com/thread.jspa?messageID=659014
Have gone the step for mailman genaliases and postfix reload.
Still the error. Any help in fixing the problem is much appreciated.
XServe G4 Mac OS X (10.4.4)

Are you adding the list via SA or the web interface?

Similar Messages

Cannot create new folders in Outlook

I just bought a new PC computer. I installed MSFT Office Professional Plus 2010. I opened Outlook and added in (i) the pst folder I had set up from my previous Vista
computer (also with Outlook 2010), (ii) my hotmail account, (iii) my at&t/yahoo account and (iv) my gmail account. I cannot create new folders in any of them.
When I right click anywhere in the navigation pane and select "New Folder..." I get the following error message:
"Outlook cannot read the registry information.
-Close and restart Outlook.
-Reinstall Outlook
-Reinstall Microsoft Exchange or other e-mail system."
I tried all three, including removing and reinstalling Office and removing all of the email accounts/pst files and re-adding and still have the problem.
If I try to right-click properties on any of the accounts, I get the same error message, with the following additional language first:
"Cannot display 'General' page. This page will remain visible, but is not available."
Not sure what is left to try.
Appreciate any ideas.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, If the PC from clean install, you can follow these steps to test this issue.
1.
Start the Outlook in safe mode,
Press and hold the CTRL key,
and then click Outlook.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Office program, we can try to disable them.
2.
Create a New profile & PST file to test this issue
If this problem does not occur in the new Outlook profile & PST, the old Outlook profile is corrupted. We can delete that and use a new Outlook profile.
3.
Make sure the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
key permissions to allow full permissions to all users
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might
occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how
to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756  How
to back up and restore the registry in Windows
a)
Exit Outlook if it is running.
b)
Click
Start, and then click Run. Copy and paste (or type) the following command in the
Open box, and then press ENTER: regedit
c)
Locate and select the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
d)
On the
Edit menu, click Permissions.
e)
Click the registry key for the user who is currently logged on, and ensure that
Read and Full Control permissions are both set to
Allow.
f)
Click the Advanced button, ensure that the user who is currently logged on is selected, that
Full Control is listed in the Permissions
column, and that This Key and Subkeys is listed in the
Apply to column.
g)
Click to select the Replace permission entries on all child objects with entries shown here that apply to child objects check box, and clear
the check box
Windows 7: Include inheritable permissions from this
object’s parent
Windows XP: Inherit from parent the permission entries that apply to child objects. Include these with entries explicitly defined here.
h)
When you are prompted to continue, click Remove.
i)
Click Apply, and then click Yes when you are prompted to continue.
j)
Click OK, and then click OK again.
k)
On the Registry menu, click Exit.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

BO4 - cannot create new universe connections

Hi,
In Universe Design Tool, trying to create new universe connections but not allowing this.
Doesn't show all the data access drivers we have installed.
Can migrate connections fine from XIR2 fine and reports run O.K
Why cannot create new universe connections
Many Thanks

Hi,
there are some notes about this in the knowldge base. Here are a couple:
For ODBC, Note 1272557 - Data Access Drivers missing while creating a new connection in Designer
for JDBC, Note 1481410 - JDBC Drivers do not appear in the List Of Drivers when Creating a New Universe Connection in Universe Designer
Can you hit www.service.sap.com/notes to look them up?
Regards,
H

Cannot create new folder?

I have just moved to a new hosting and have connected to it
and I can edit files. When I try to add a folder to the remove I'll
get
"An FTP error occured - cannot create new folder .
Access denied. The file may not exist or there could be a
permission problem".
Any idea?

Hi,
Did you make any changes before the issue appears?
Before going further, you may try the
system restore to go back to a previous status and check the result.
Tracy Cai
TechNet Community Support

Cannot Create New Mailbox

Hi all,
First of all I already create a similar thread : http://social.technet.microsoft.com/Forums/en-US/b8f88745-ca79-43f9-8857-3b87781e5c19/rbac-to-create-mailbox?forum=exchangesvradmin
I got a problem in my Exchange Server 2013 environment. I cannot create new mailbox (new user) from ECP. But I can create new mailbox and choose existing user.
Active Directory operation failed on DC.mydomain.com. This error is not retriable. Additional information: Access is denied. Active directory response: 00000005: SecErr: DSID-031A121F, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
already try with no luck :
re-inherit the permission.
setup /prepareAD
I create new user and assign Org Management & Domain Admin
how to check whether the permission in my AD is correct ? or any idea should I start troubleshooting ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs: Krisna Ismayanto | Twitter:
@ikrisna

solved by executing setup.exe /preparedomain
and I found one of the server in container ADSIEdit were disabled inheritance. execute setup.exe /prepareAD, reboot the server (because it
ask for it), then execute setup.exe /preparedomain
cheers ! :)
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs: Krisna Ismayanto | Twitter:
@ikrisna

FRM-47001: Cannot create parameter list aamir : list with this name exists.

Sir I use parameter list in my form whose name aamir first time when I call report system give result right but second time I call report then system give this error
FRM-47001: Cannot create parameter list aamir : list with this name exists.
Please give me idea how I get print view second time
Thank
aamir

Hello aamir,
Use the following to delete existing parameter.
DECLARE pl_id ParamList;
BEGIN
pl_id := Get_Parameter_List('tempdata');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List(pl_id);
END IF;
END;
Cheers,
Suresh

I don't have a "create new list" button in the reminder list when i press edit

I tried to create a new reminder list, I open the reminder app, under Lists, i pressed the 3 bar symbol on the upper right hand corner, then i pressed edit, but there is neither the delete button () nor the "create new list" button. Can someone tell me how to get the create new list button?

I had that problem too!
Do you have a hotmail account that you have connected to?
Because I do and I couldn't make a new reminder list!!
But I fixed it by going to settings and going to mail, contacts and calendar and then under "accounts" i went to Mail and then slided the little dot for reminders to off.
This fixed it for me, hopefully for you too!

After upgrade to 6.3.4 cannot create new bookmarks by dragging nor open existing bookmark properties

Just upgraded to 3.64. Now I cannot create new bookmarks either by dragging a URL or trying to create a new one in organize bookmarks. For existing bookmarks when I hit properties on the pop up menu all I get is a title bar that says "bookmark properties for (name of bookmark)" but I can't resize it or otherwise manipulate the title bar to access information or change the properties

Hello Victor.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

I can't create new lists in reminders

I've recently got an iPhone 4S and I've been trying to add a new list to reminders and edit one of the existing ones but I've been unsuccessful so far. I've followed the instructions from the user's manual and everything seems fine until the very end, I do get to the stage where I can tap the Edit button but then nothing happens when I tap the name of the existing list to edit it. Any ideas how I could resolve this issue are much appreciated! Thanks.

Hi,
Thanks for your answer. I can edit the contents just fine, the problem is with creating/editing/deleting lists. Since you mention 'tapping edit then "Create New List"', I think that's where part of the problem lies because I can't create a new list. When I tap 'Edit', I can see my existing (pre-defined) lists but there is no "+" button or a "Create New List" button. I can't tap the lists, nothing happens and no red circle with a horizontal line appears.
Incidentally, I can't change the names of the pre-defined calendars either but I've sort of managed to bypass that problem by syncing the iPhone with iTunes and importing my calendar from iCal.
Do you think I should take it back to the shop or is there any other way I could resolve this issue?
Thanks

Cannot create a list of Imported Graphics in FM12

I have FM12 and cannot create a list of imported graphics (either by Add > Index of > References - Imported graphics --- or by Add > List of > References - Imported graphics), as I had been able to do in the past. Was this changed in FM12 & if so, why? I saw a few postings on ‘Extendscript of the week’ instructing on adding certain scripts to the FM program folder, but this did not work either. Can someone help me with this? If you've used the scripts I'm referring to, and got them to actually work, could you provide detailed instructions? The ones provided are certainly lacking.

Thank you.
Apparently it was as simple as updating to FM 12.0.2.
From the Adobe FrameMaker 12.0.2 ReadMe file:
Feature enhancements
Generating a list or an index of references (imported graphics) results in a blank file. (Ref#: 3725424)
I don't know that it is accurately called an "enhancement" but more of a "fix" since it has always worked in earlier versions.
Anyway, thanks again!

HT5577 i bought recently a second hand apple i phone 4s but now i cannot creat new apple id

i bought recently a second hand apple i phone 4s but now i cannot creat new apple id .

I suspect you're referring to the 3 free iCloud account limit on an iOS device. If so, there's no way around this. Once that limit is reached, you'll have to create the iCloud account on another iOS device or computer, then setup that account on your phone.

AME iExpenses: Cannot create new approver group

We need to set up approver groups for iExpenses. I assigned myself Approvals Management Administrator and Aprovals Management Business Analyst roles. With these roles I can create new attributes and conditions. However, I cannot create new action types and approval groups. The create button for the approval group just does nothing.
What am I missing? We are 11.5.10.2, AME.B

Pl see if ML Doc 420387.1 (How to Create the Approval Transaction Type for AME.B or higher ?) can help
HTH
Srini

Cannot create new LWP?

To test my Server process, I make a Client process to send numerous requests by creating one-connection-one-thread.
Under same amount of connections (such as 50 connections), indefinitely, the process will be error as follow:
libthread panic: cannot creat new LWP (PID:XXX LWP 2) stacktrace:XXXXXX
my question is:
If there are limits of LWP in a process?
I use unbound thread and let the kernel to balance threads between LWP, must I use bound thread?

I've seen this when my program used a lot of file descriptors. Using truss I could see that a call to open /dev/zero failed and a libthread panic message was displayed. Try using the ulimit command to increase your limit on open files.

Cannot create new mailing list

I have a large addressbook in TB with many mailing lists created in the past. I am trying to create a new one. When I go "File, New", the mailing list option is blanked out.

In Address Book
If I select a 'Mailing List' (not an address book)
File > New > Mailing list is greyed out because you cannot create a mailing list from a mailing list.
If you select an address book, then 'Mailing List' should be available.

Create New List Item

I am getting an error each time I try to run this code and get the error message "There was a problem submitting your answers. Please try again later."I have looked at this for so long now I am not sure if I am missing something or what. I have referenced SPServices and jquery and it is working correctlyI am trying to make a crossword using some code I found online and I followed it andstill get this error. // Create an object to associate each SharePoint column with the class name used for the input and the user's response for that column
var responses = {
"oneAcross": {
"selector": "one-across",
"column": "OneAcross",
"answer": ""
"oneDown": {
"selector": "one-down",
"column": "OneDown",
"answer": ""
"twoDown": {
"selector": "two-down",
"column": "TwoDown",
"answer": ""
"threeDown": {
"selector": "three-down",
"column": "ThreeDown",
"answer": ""
"fourAcross": {
"selector": "four-across",
"column": "FourAcross",
"answer": ""
// Create the batchCmd variable that will be used to create the new list item
var batchCmd = '<Batch OnError="Continue"><Method ID="1" Cmd="New">';
// Concatenate values of each response input by iterating over the object representing the responses
$.each( responses, function() {
// Cache the current item in the responses object.
var $response = this;
// For each input in the crossword associated with the current response object, get the values and save them in the answer property.
$( '.' + $response.selector ).each( function() {
$response.answer += $( this ).val().toLowerCase();
// Add the response to the batchCmd
batchCmd += '<Field Name="' + $response.column + '"><![CDATA[' + $response.answer + ']]></Field>';//Create a new list item on the destination list using the batchCmd variable
$().SPServices({
operation: "UpdateListItems",
async: true,
webURL: "http://operations.home.blah.com/sites/EIS/SEEIS/SSC/Lists/",
listName: "Crossword",
updates: batchCmd,
completefunc: function( xData, Status ) {
// If the AJAX call could not be completed, alert the user or include your own code to handle errors.
if ( Status !== "success" ) {
alert( "There was a problem submitting your answers. Please try again later." );
else {
// If there was an error creating the list item, alert the user or include your own code to handle errors.
if ( $( xData.responseXML ).find( 'ErrorCode' ).text() !== "0x00000000" ) {
alert( "There was a problem submitting your answers. Please try again later." );
// if the list item was successfully created, alert the user and navigate to the Source parameter in the URL (or to a URL of your choosing).
else {
alert( "Your answers were submitted successfully! Click OK to continue." );
if ( window.location.href.indexOf( "Source=" ) !== -1 ) {
var url = window.location.href.split( "Source=" )[1].split( "&" )[0];
window.location.href = url;
else {
window.location.href = "/";

When I look at the demo on the page it fires the same response as that is part of the error handling because it is a standalone HTML and not on a sharepoint server so I am wondering if something I am missing on the submit.click function or batchcmd.
I included the entire code for it to see if maybe you can see something I am not. My crossword is on a Sharepoint Server
$( '#crossword-submit' ).click( function( event ) {
// If you decide to use a hyperlink instead of a button input, this will prevent
//the hyperlink from actually navigating away from the page or to an anchor.
event.preventDefault();
// Disable the button so the user can't click it again and submit the answers more than once.
$( this ).prop( 'disabled', true );
// Prevent submission if the crossword isn't completed.
if ( $( '#crossword' ).find( 'input' ).filter( function() { return $( this ).val() === ""; }).length !== 0 ) {
alert( "You have left some answers blank. Please complete all answers before submitting." );
$( this ).removeProp( 'disabled' );
return false;
// Confirm that the user wants to submit their answers.
var confirmResponse = confirm( "Are you sure you are ready to submit your answers? Once submitted they cannot be changed.\n\nClick OK to continue or Cancel to review your answers." );
if ( confirmResponse === false ) {
$( this ).removeProp( 'disabled' );
return false;
// Create an object to associate each SharePoint column with the class name used for the input and the user's response for that column
var responses = {
"oneAcross": {
"selector": "one-across",
"column": "OneAcross",
"answer": ""
"oneDown": {
"selector": "one-down",
"column": "OneDown",
"answer": ""
"twoDown": {
"selector": "two-down",
"column": "TwoDown",
"answer": ""
"threeDown": {
"selector": "three-down",
"column": "ThreeDown",
"answer": ""
"fiveDown": {
"selector": "five-down",
"column": "FiveDown",
"answer": ""
"sixDown": {
"selector": "six-down",
"column": "SixDown",
"answer": ""
"sevenDown": {
"selector": "seven-down",
"column": "SevenDown",
"answer": ""
"eightDown": {
"selector": "eight-down",
"column": "EightDown",
"answer": ""
"fourAcross": {
"selector": "four-across",
"column": "FourAcross",
"answer": ""
"nineAcross": {
"selector": "nine-across",
"column": "NineAcross",
"answer": ""
"tenAcross": {
"selector": "ten-across",
"column": "TenAcross",
"answer": ""
"elevenAcross": {
"selector": "eleven-across",
"column": "ElevenAcross",
"answer": ""
"twelveAcross": {
"selector": "twelve-across",
"column": "TwelveAcross",
"answer": ""
// Create the batchCmd variable that will be used to create the new list item
var batchCmd = '<Batch OnError="Continue"><Method ID="1" Cmd="New">';
// Concatenate values of each response input by iterating over the object representing the responses
$.each( responses, function() {
// Cache the current item in the responses object.
var $response = this;
// For each input in the crossword associated with the current response object
//, get the values and save them in the answer property.
$( '.' + $response.selector ).each( function() {
$response.answer += $( this ).val().toLowerCase();
// Add the response to the batchCmd
batchCmd += '<Field Name="' + $response.column + '"><![CDATA[' + $response.answer + ']]></Field>';
// Close the batchCmd variable
batchCmd += '</Method></Batch>';
// Create a new list item on the destination list using the batchCmd variable
$().SPServices({
operation: "UpdateListItems",
async: true,
webURL: "http://operations.homestead.abc.com/sites/EIS/SEEIS/SSC/Lists/",
listName: "Crossword",
updates: batchCmd,
completefunc: function( xData, Status ) {
// If the AJAX call could not be completed, alert the user or include your own code to handle errors.
if ( Status !== "success" ) {
alert( "There was a problem submitting your answers. Please try again later." );
else {
// If there was an error creating the list item, alert the user or include your own code to handle errors.
if ( $( xData.responseXML ).find( 'ErrorCode' ).text() !== "0x00000000" ) {
alert( "There was a problem submitting your answers. Please try again later." );
// if the list item was successfully created, alert the user and navigate
//to the Source parameter in the URL (or to a URL of your choosing).
else {
alert( "Your answers were submitted successfully! Click OK to continue." );
if ( window.location.href.indexOf( "Source=" ) !== -1 ) {
var url = window.location.href.split( "Source=" )[1].split( "&" )[0];
window.location.href = url;
else {
window.location.href = "/";
</script>

Mailman cannot create new list

Similar Messages

Maybe you are looking for