Mailman web interface now saving changes

Hi,
On our server, Mailman is working fine (it sends out mail to those on the list), but the web interface does not work. I can log in to the web interface, but any changes I make will not take. I can not approve or delete messages, and I can not change the settings in the administrative section. I have tried in Firefox, Safari and in Explorer. I have CGI enabled on my site. Any ideas on why I can not manage the lists?

I've had the same problem on some of my virtual domains for a long time. I suspect that if you use multiple domains on your server then you're likely to encounter this problem. It seems that mailman is really picky about the domain names matching. I found my fix on this thread:
http://discussions.apple.com/thread.jspa?threadID=131327&start=5
The part that worked for me was the fix_url command of withlist. So if you have a mailing list named 'foobar' and your domain is example.com then you would type this:
sudo /usr/share/mailman/bin/withlist -l -r fix_url foobar --urlhost=example.com
Don't ask me what it does but it seems to fix this particular problem. Hope that this helps you like it did for me!

Similar Messages

E4200 Web interface port wont change

Howdy yall,
I was wondering if there are any known issues regarding the linksys e4200 web interface accessibility.
I am trying to configure the web interface for outside access, but i want the port to be: 2000
So i changed the port, but when i type my external IP in the webbrowser, without a port, i still get the username/password
prompt window. This is in the standart 80 port, even though i changed the port to 2000.
Also, when i type my external IP including port number 2000, the connection fails.
The problem is, the webserver in the router running the web interface, refuses to change to port 2000
It doesnt matter whether i restart the router after the change, or not.
Does anyone have any clue about the root of the problem ?

Never mind, it appears that for some reason my browsers connect to the routers interface directly. no matter what url i use.
An online port scan reveiled that the port did in fact change, so there is no problem.

WRV200 web interface crashes after changing config

I've got a WRV200 with firmware 1.0.24. Configured to run secured wifi and a VPN tunnel, all without a problem.
Now, when I disable the DHCP service on the box and click Save Settings I'm prompted with the "wifi will restart"message after which the web interface will stop responding. Other functionality (like VPN tunnel) stays OK. I'm connected wired and tried the change with Internet Explorer and Firefox. The only way to get access to the web UI again is do a powercycle of the WRV200. Then the config still shows DHCP enabled.
When trying to upgrade the firmware to 1.0.29 exactly the same happens: try to apply the upgrade, then the web interface stops responding in the end... and after a reboot the f/w still shows 1.0.24.
So: is anyone seeing the same ? And more so: does anyone know how to get around this ?

make sure that you upgrade the firmware from a hardwired computer...
go to ftp://ftp.linksys.com/pub/network and download the tftp.exe file .. assign a static ip address on the computer ( 192.168.1.10 ) and reduce the NIC card's speed to 10 Mbps half duplex mode...
run the tftp.exe file...here the server is router's ip add , password is router's password....browse the firmware file and click upgrade...
the firewall should be disabled during the complete process...
after the firmware upgrade , reset the router for 30 seconds and do a power cycle...

Mailman web interface crash

I have a crazy problem with my Mailman.
Web config interface and Server Admin config interface are not working. I am not able to change configs, add mailing lists, etc.
However, every old mailing lists are working perfectly.
I used:
sudo /usr/share/mailman/bin/check_perms -f
sudo /usr/share/mailman/bin/mailmanctl -s stop
sudo /usr/share/mailman/bin/mailmanctl start
Nothing happened. And my Web interface returns:
Not Found
The requested URL /mailman/ was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
What could be happening with my Mailman? Could anybody help me?
I am not able to find anything that could help me, including in others Mailman discussions. Thanx a lot.

When I try to access www.xxx.com/mailman, I have:
Not Found
The requested URL /mailman was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

Aironet 1100 series web interface times out after few mins of inactivity

Hello,
I just upgraded an Aironet 1121G access point to IOS software version 12.3(8)JEC2 (file name: c1100-k9w7-tar.123-8.JEC2). I noticed that the HTTP web interface now times out after an inactivity of just a few minutes (dont have an exact number, but it times out between 2-4 mins of inactivity). Can this timeout period be changed..!? How? This wasnt happenning on the previous software version: 12.3(8)JEB1.
Also, where can I find the online help files for the latest Cisco IOS software? I cant seem to find it on the Cisco website!
Thanks much for all your help.. really appreciate it.

Does anyone have any idea on this..!? Its terrible having to login every couple of mins..!
Thanks :)

Saving Data in Web Interface

Hi Experts,
I have following problem, Please provide your inputs to solve this.
Background Info: We are using web interface ( web excel) for planning and we have fund center authorization variable and once user launches the interface and select fundcenter, the data appears and user goes on doing planning. We do have, running planning sequences on save functionality implimented and we are running global planning sequence having the functions which check automatically executed before saving of data.
Issue:When user is in fund center "A" and inputs in the layout some data and hits the save button and error is generated from the error function because of wrong data input and data is not saved into cube. It is fine to this point. Now user does not eixt the interface but navigates to other fund center i.e "B" and keys in data and hit the save button, no errors occur and data is saved. Here is the problem, at this point it is saving data of Both fundcenter A and B. We want to save only data of fundcenter B at this point. The error functions are running only on the fund center that user is selecting but I should be able to release the fund center A when user navigates away from it.
Any thought to solve my issue is appreciated with points and let me know if you need any additional details.
Thanks,
Raj.

Hi Guys,
Thanks a lot for your suggestions.
Anand >> Please let me know how can I create a function to clear the buffer once the user selection changes on the fundcenter. Is it a function module ?
Marc >> I cannot run the planning function on all the fundcenters that user is authorized because more than one user is authorized for same fund center and locking is based on fundcenter. If I run the function for all the fund center that the user is authorized then he is going to create a lock on all fund centers and that results in locking issues. Please let me know if see any other solution to solve this issue.
In general, I will be ok even if user looses the data in buffer for fund center "A" when they navigate out of it when error occur but I should not be saving the data.
Thanks a lot guys for quickly understanding the problem and providing your thought on it. I know this is best thing about the SDN.
Thanks,
Raj.

I've been editing images with ease for a long time but now the changes are not being saved.

I've been editing images with ease for a long time but now the changes are not being saved.
Also, it is not liking me adding a large ammount of images in one go?

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

RV082 Unable to see or change settings in web interface

I have just purchased an RV082. I am using a Mac with Safari and Firefox to access the web interface through http://192.168.1.1
I was able to log in to the web interface using admin/admin, but the system summary page is blank.
The category choices were visible on the left (e.g. Setup>System, Setup>Password etc... but, once again, the details area to the right is blank. No way to see what the settings are, or to change them.
I have tried Safari and Firefox, ensuring that they were up to date for all Flash and other plug-ins that might be required to view the htm documents, but no help.
I have reset the router in every conceivable manner:
1. pressing and holding reset for 5 secs, or
2. pressing and holding reset for 30 secs, or
3. pressing and holding reset for 30 secs, powering off and back on again, then releasing the reset button
4. removing all of the input cabling and power. Letting it sit for 2 minutes. Repowering.
5. same as above, followed by a reset.
6. etc..., etc... I've been at this for hours, systematically trying everything I could think of.
The system appears to be resetting because, typically, after a reset, it will accept my login but give me blank detail pages. If I try again, it no longer accepts my (unchanged) password. A reset allows the device to recognize admin/admin again, but still only blank detail pages.
I would appreciate any suggestions. I'm not trying to do anything fancy here, just access the web interface to change the system identifiers, password and upgrade the firmware.
Thanks, Louis

Hey Louis,
Try downloading an add on for firefox. It is called IE tab 2. This is an internet explorer emulator. Once you have that installed you can go to the bottom right hand corner of the page and click on the IE emulator tab. After that, try logging into the router with that page.

DATA SAVED UNLESS ERROR MESSAGE IN WEB INTERFACE BUILDER

Dear collegue,
IN SEM-BPS THERE is a fox that executes a control on the data inserted
in the layout. In planning folder when the data are not corrected there
is a message that lock the date and data cannot be saved.
In web interface builder there is the message (with icon "STOP") but the
wrong data are saved however. This is a serious problem.
regards,
DG

Dear DG,
when using planning folders there is the feature to run a function upon leaving a layout and upon save. In order to forbid saving of data in case of error the function has to run upon save - and that feature is not available in WEB based planning.
You can add it by implementing the how to paper "How to run planning sequences on save and other events". You can find it in the service market place http://service.sap.com/~sapdownload/011000358700004491692004E/HowToRunPlFuncOnEvent.pdf.
This should solve your problem.
Regards, Olaf

RV130 web interface save changes bug

When making certain changes to settings using the web interface, it gets stuck on applying them, it never returns
and one is forced to do a page refresh to get back to it, not all changes do this, but changes to vlan settings definitely do this
one is then forced to log in again, sort of, as it thinks you are already logged on

Hello,
Can you please share the page where the configuration gets stuck?
Nagaraja

No messages by perfoming a Function After Data Change - Web Interface Build

Hey Xperts,
I have a problem to see messages, when I perform a Function via WEB - Function After Data Change.
You can select by costomizing a Subcomponent "Layout" that a Function can be performent by the feature "Function After Data Change".
But when I run the function there is no message in the message tray.
When I run the function via Button, there will come up a messages.
Is this a buk or a feature.
How can I see message by performing a Function After Data Change ?
Thanks for help.
Thomas

Hi Thomas,
the system works as designed. It would be a bit anoying if the success messages are always displayed. Therefore only errors are shown.
If you really need it, here's the modification:
Include LUPWB_COMPONENTD18
* PROCESS FUNCTION (after data set)
 if m_state-request-function = cb_true.
 l_function ?= if_upwb_c_layout2~get_function( ).
 if l_function is not initial.
 l_function->_execute(
* i_show_success_msg = cb_false ). "<<<DELETE
 i_show_success_msg = cb_true ). "<<<INSERT
 endif.
 m_state-request-function = cb_false.
 endif.
Regards
Marc
SAP NetWeaver RIG

Displaying a BW query in web interface

Hello People ,
I am trying to see a BW query in a web interface . I will tell you how am I doing it . I run the transaction RRMX which opens an excel sheet and gives me a tol bar from which I open a query . Then I choose info areas from the next window and it shows me a tree structure with two nodes
1) Financial
2) Industry sectors
I expand industry sectors > retail > staff works
This takes me to two nodes
1)       operational
2)       sales infocube
I expand sales infocube and this takes me to a couple of nodes
1)       Key business driver
2)       Manager forcasted sales
3)       Productivity data source
4)       .
5)       .etc
I select key business driver and choose the CHANGE icon from the toolbar . This opens the query designer . There I have an icon in the toolbar which says display quey on web . I click that and it attempts to display the query in internet explorer .
Now the problem is the the message that appears on the browser is
Warning sign : variable OFPER for characterstic fiscal year/period has been converted to required entry .
Error sign : Error when generating data provider .
Now my question is what does this message mean ?Does this mean that the required content that I am trying to access has not been activated or there is some configurational issue ?
Regards
Deepak Singh

Hi Deepak,
It means that there is a selection screen for Fiscal period in which you have to enter the Fiscal Period. Only for the Fiscal period for which you entered the data would be displayed.
But the best way to create teh web report is to goto Web Application Designer -> Drag and drop the "Table" webitem on the right hand side -> Assign the Query to the web item. Now execute it in browser from the Web Application designer. Copy the link and use it whenver you want it.
Bye
Dinesh

Executing the planning function while opening the web interface

hello all,
I have created a planning area based on multiprovider.This multiprovider is based on two transactional cube ie,COPA cube and Cost Center cube.
This planning area is meant for enabling integrated planning.One plans in COPA cube and other plans in Cost Center cube the income statement gets planned based on this two.
I selected planning items in multiprovider layout to display the income statement.The layout is as follows:
PlanningItem Amount
Net Sales: 9.000,00 INR (This comes from COPA)
Sales Overheads: 200,00 INR (This comes from Cost Center)
Depreciation: 200,00 INR (This comes from Cost Center)
Other Expenses: 300,00 INR (This comes from Cost Center)
EBIT: 0,00 INR
Interest Income: 0,00 INR
Interest Expense: 0,00 INR
Operating Income: 0,00 INR
Taxes: 0,00 INR
Now EBIT planning item is to be calculated from the planning items as follows:
EBIT = Net Sales-Sales Overheads-Depriciation-Other Expenses
For this i have created a planning function which calculates EBIT.This function works properly,there are no issues in it.
My problem is that i want this function to be executed as soon as i open the web interface for my planning application and the result should be as follows:
PlanningItem Amount
Net Sales: 9.000,00 INR (This comes from COPA)
Sales Overheads: 200,00 INR (This comes from Cost Center)
Depreciation: 200,00 INR (This comes from Cost Center)
Other Expenses: 300,00 INR (This comes from Cost Center)
EBIT: 8.300,00 INR
Interest Income: 0,00 INR
Interest Expense: 0,00 INR
Operating Income: 0,00 INR
Taxes: 0,00 INR
Can anybody suggest how to go about this problem?
Thanks in advance.
regards,
Yogesh

Hi Yogesh,
as far as i know, there is no standard functionality for that purpose, but there are workaround for it.
1. Modify the BSP Application.
 Go to SE80 --> Repository Browser --> BSP Application --> your WI name --> page with flow logic --> double click on page1.htm --> Event handler tabstrip --> on the drop down selection press F1 --> add a function module that call you BPS function in specific event (e.g: OnInitialization).
2. Use WI-Exit Class / WI-Extention (ABAP OO).
Here you need to create sub class from Class: CL_UPWB_BSP_APPL, and assign the class to your WI. You can then add a function module that call you BPS function in method:
2.1. Load --> performed only once on intial execution of WI.
2.2. Initialisation --> called once for each server response.
2.3. Dispatch --> called at each action and also for each WI component.
You can see further information in SAP how to paper:
How to Validate manual input in WEB planning application, New BPS-Features delivered with SAP BW 3.5, etc.
You can call your BPS function with BPS API FM (See F.Group: UPC_API)
But there is also more easier way to realize your ebit calculation. If you define your EBIT calc. manually in layout (define with manually defined Lead column). With this way, You will always get your EBIT analog with inputed values.
Then you add your EBIT calc.function to Layout Component in WI in property: 'Function After Data Change'.
Best Regards,
Suan Liono

I can no longer login to my router web interface from Safari on iPad.

I made a mistake today. After accidentally opening up the web interface login screen to my router in Safari, I just pressed cancel in the login box. Since then, Safari just hangs on 192.168.0.1 when I want to access the router and the login box no longer appears. I can still login via the Terra browser on the same iPad. I would really appreciate any guidance as to how to undo whatever setting I have changed. I have tried clearing cache/cookies/history. Thanks.
Edit: Could I have refused a permission to access in some way? I am now wondering if in my haste, I may have mistaken a permission box for the login box. Is there somewhere in the settings I could check if I have refused a permission? Thanks again.

there should be an X on the right side of each tab. clicking on it should close that tab

Laserjet 4345 mfp won't scan to folder; web interface not showing all admin tabs

Hi,
I have a laserjet 4345 mfp which, until a few days ago, was able to scan documents to a network folder. When I try now it gives me the error "the path cannot be found". Here's what I've tried so far:
- Looked for a way to change the network folder settings or define a new folder. I couldn't find any so I printed the "how to scan to folder" page from the control panel. It tells me to define a new location by clicking the "Other" button on the control panel, but I can't find an Other button, on any screen.
- Accessed the web interface, which only shows up with the "Home" and "Networking" tabs - no "Digital Sending", "Settings", or "Information" tabs, which should be there according to the manual.
- Thinking it might be a permissions issue, I checked and found that the administrator password was not set. I set the admin password via the web interface, and now when I try to access it prompts for the password I defined, but still gives this incomplete interface. I am also able to access and change all the networking settings, so I don't think insufficient permissions are the issue.
- Called HP support, they said the problem is permissions and I should cold reset the machine, which I am quite reluctant to do since not only all settings, but the entire address book as well, would need to be re-entered. This aside from the fact that I really don't think permissions are the issue, as decribed above.
- Verified that I am able to send scans to different email addresses. SMTP gateway test goes through OK. LDAP does not, but this has not prevented scan to folder from working in the past.
I don't know how the scan-to folder was initially set up because I wasn't supporting this client at the time.
Any ideas?
Many thanks in advance.

I have a problem with my scan to folder as well and I have to access the folder from a computer before it will work. I'm not sure why that works, actually. You might want to give that a try to see if it fixes the problem. If it does, I imagine it is some sort of security problem with the folder you are trying to scan to.
Thanks,
Tiffany
I am an HP employee!

Mailman web interface now saving changes

Similar Messages

Maybe you are looking for