Mails from Exchange 2013 to Exchange Online blocked using Blocklist 1

Hello,
1 week ago I've implemented a new Exchange 2013 at a company which used SBS 2011 before.
But now its impossible to send a mail to a recipient on Exchange Online.
Everytime we get a NDR with the following text:
Service unavailable; Client host [xx.xx.xxx.xxx] blocked using Blocklist 1; To request removal from this list please forward this
message to [email protected]
If I run a SPAM-Blacklist Check on mxtoolbox.com I can see that the IP is on none blacklist.
How can i determine why this IP is on the Exchange Online Blacklist? I'm sure that no spam was sent over this IP, the new infrastructure is 1 week old...
Could there be an other reason ?

Hello,
According to the NDR information, this issue is caused by FOPE last update. So I recommend you contact FOPE support to delist.
Please open the link:https://support.live.com/eform.aspx?productKey=mocpexforefront&ct=eformts&scrx=1&brand=mocp&brandtry=1 ,choose
"Delisting Request" under "What type of problem you have".
Cara Chen
TechNet Community Support

Similar Messages

Cannot send mail from Exchange 2013 to Exchange 2007

I have an
Exchange 2007server with all roles in the same server (Version:
08.03.0327.001 ) on a Windows 2008 R2 server. I have now installed two Exchange 2013 servers both with CAS and MBX roles on Windows 2012 servers
(full patched). There is also a DAG between the new servers. All mail goes through a BorderWare besides the internal mail.
I can send mail from both environments to the Internet. I can also send internal mail from Exchange 2007 to Exchange 2013.But the problem is that I am unable to send from Exchange 2013 to Exchange 2007. I've debugged, but not solved the problem and there are
few articles on the Internet.
Any suggestions?

These two sentences are in conflict : "I can also send
internal mail
from Exchange
2007 to
Exchange 2013. But
the problem is
that I am unable
to send from Exchange
2007 to
Exchange 2013. "
Can you describe what is your real problem? Flow from E2007->E2013? Or vice versa?
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Damir

Hybrid Deployment - Migrating from Exchange Online to On-Premise Exchange

Hi,
I'm migrating from Exchange Online to an 2013 On-Premise Exchange.
Hybrid Deployment has been set up and configured successfully.
However, I'm encountering issues while performing a mailbox migration to the on-premise server.
It's has been stuck at validating and reflecting a MigrationTranscientException Error.
Appreciate the valuable advise and suggestions! Thanks!
Cheers!
Joshua
Error message below:
Data migrated:
Migration rate:
Error: MigrationTransientException:
The Mailbox Replication Service could not connect to the remote server because the remote server encountered an internal error. The call to ‎'https://mail.domain.com.sg/EWS/mrsproxy.svc‎' failed. Error details: The content type text/html; charset=utf-8 of
the response message does not match the content type of the binding ‎(application/soap+xml; charset=utf-8)‎. If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: ‎'<!DOCTYPE
html> <html> <head> <title>Runtime Error</title> <meta name="viewport" content="width=device-width" /> <style> body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px} b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px} H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red } H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon
} pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt} .marker {font-weight: bold; color: black;text-decoration: none;} .version {color: gray;} .error {margin-bottom: 10px;} .expandable
{ text-decoration:underline; font-weight:bold; color:navy; cursor:hand; } @media screen and ‎(max-width: 639px)‎ { pre { width: 440px; o‎'. --> The remote server returned an error: ‎(500)‎ Internal Server Error.. --> The content type text/html; charset=utf-8
of the response message does not match the content type of the binding ‎(application/soap+xml; charset=utf-8)‎. If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were:
‎'<!DOCTYPE html> <html> <head> <title>Runtime Error</title> <meta name="viewport" content="width=device-width" /> <style> body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px} b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px} H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red } H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon
} pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt} .marker {font-weight: bold; color: black;text-decoration: none;} .version {color: gray;} .error {margin-bottom: 10px;} .expandable
{ text-decoration:underline; font-weight:bold; color:navy; cursor:hand; } @media screen and ‎(max-width: 639px)‎ { pre { width: 440px; o‎'. --> The remote server returned an error: ‎(500)‎ Internal Server Error. --> The Mailbox Replication Service could
not connect to the remote server because the remote server encountered an internal error. The call to ‎'https://mail.domain.com.sg/EWS/mrsproxy.svc‎' failed. Error details: The content type text/html; charset=utf-8 of the response message does not match the
content type of the binding ‎(application/soap+xml; charset=utf-8)‎. If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: ‎'<!DOCTYPE html> <html> <head>
<title>Runtime Error</title> <meta name="viewport" content="width=device-width" /> <style> body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;} p {font-family:"Verdana";font-weight:normal;color:black;margin-top:
-5px} b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px} H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red } H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt} .marker {font-weight: bold; color: black;text-decoration: none;} .version {color: gray;} .error {margin-bottom: 10px;} .expandable
{ text-decoration:underline; font-weight:bold; color:navy; cursor:hand; } @media screen and ‎(max-width: 639px)‎ { pre { width: 440px; o‎'. --> The remote server returned an error: ‎(500)‎ Internal Server Error.. --> The content type text/html; charset=utf-8
of the response message does not match the content type of the binding ‎(application/soap+xml; charset=utf-8)‎. If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were:
‎'<!DOCTYPE html> <html> <head> <title>Runtime Error</title> <meta name="viewport" content="width=device-width" /> <style> body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px} b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px} H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red } H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon
} pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt} .marker {font-weight: bold; color: black;text-decoration: none;} .version {color: gray;} .error {margin-bottom: 10px;} .expandable
{ text-decoration:underline; font-weight:bold; color:navy; cursor:hand; } @media screen and ‎(max-width: 639px)‎ { pre { width: 440px; o‎'. --> The remote server returned an error: ‎(500)‎ Internal Server Error. --> The call to ‎'https://mail.domain.com.sg/EWS/mrsproxy.svc‎'
failed. Error details: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding ‎(application/soap+xml; charset=utf-8)‎. If using a custom encoder, be sure that the IsContentTypeSupported method is
implemented properly. The first 1024 bytes of the response were: ‎'<!DOCTYPE html> <html> <head> <title>Runtime Error</title> <meta name="viewport" content="width=device-width" /> <style> body {font-family:"Verdana";font-weight:normal;font-size:
.7em;color:black;} p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px} b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px} H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red
} H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon } pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt} .marker {font-weight: bold; color: black;text-decoration:
none;} .version {color: gray;} .error {margin-bottom: 10px;} .expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; } @media screen and ‎(max-width: 639px)‎ { pre { width: 440px; o‎'. --> The remote server returned an error:
‎(500)‎ Internal Server Error.. --> The content type text/html; charset=utf-8 of the response message does not match the content type of the binding ‎(application/soap+xml; charset=utf-8)‎. If using a custom encoder, be sure that the IsContentTypeSupported
method is implemented properly. The first 1024 bytes of the response were: ‎'<!DOCTYPE html> <html> <head> <title>Runtime Error</title> <meta name="viewport" content="width=device-width" /> <style>
body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;} p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px} b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px} H1
{ font-family:"Verdana";font-weight:normal;font-size:18pt;color:red } H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon } pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt}
.marker {font-weight: bold; color: black;text-decoration: none;} .version {color: gray;} .error {margin-bottom: 10px;} .expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; } @media screen and ‎(max-width: 639px)‎ { pre { width:
440px; o‎'. --> The remote server returned an error: ‎(500)‎ Internal Server Error

Hello Joshywahcho ,<o:p></o:p>
First Check is the MRS proxy is enabled or not and restart the Microsoft Exchange Mailbox Replication service and
IIS on Hybrid .<o:p></o:p>
As now Microsoft has change the procedure to roll back the mailbox from O365, please follow the below mention Step<o:p></o:p>
Moved the affected user's mailbox to the Hybrid Server from Office 365 <o:p></o:p>
Connect to Exchange Online using remote PowerShell<o:p></o:p>
Ran the command
$Credentials = Get-Credential<o:p></o:p>
Ran the command
New-MoveRequest -identity <e-mail address of the affected user> -OutBound -RemoteTargetDatabase "Name of the Datbase" -RemoteHostName <Your Host Name> -RemoteCredential $Credentials -TargetDeliveryDomain <Your Target Delivery Domain><o:p></o:p>
Ran the command
Get-MoveRequest -Identity <e-mail address of the user> to check the status of mailbox move<o:p></o:p>
once the mailbox move from Office 365 to Hybrid Server was completed then initiated a Mailbox move from the Hybrid Server to On-premise server <o:p></o:p>
Mailbox was moved successfully from Hybrid Server to the On-premise server .<o:p></o:p>
checked in the On-premise server 2007 and the affected user's mailbox was showing there<o:p></o:p>

How to remove repeated mails in exchange online outlook web app

Hi,
Any help me , how to remove repeated mails in exchange online outlook web app . As we are in process of migrating mailboxes to office 365 . We have migrated 5 mailboxes . But when i checked outlook web app after migration completed , i could see repeated
mails . When i compared with on premise outlook and office 365 outlook web app , there was lot of differences in read and unread mails .
Customer is expecting , same read and unread count should be replicated to office 365 owa.
Please suggest me to prevent this problem . As this is very urgent to give solution to customer .
Big thanks in advance.
Vinoth .

If you've setup Outlook 2013 so it's connected to Office 365, and you've import the .pst file into Outlook, it will be showing as another "mailbox" within Outlook, but default called "Personal Folders" (unless you renamed it when it was created).
You should find that you can simply copy the mail items / folders from Personal Folders into their new home in the Office 365 mailbox. Once that's done Outlook will synchronise the items with o365 which may obviously take a while to complete, but once it's
finished those messages will be available online.

Importing mail from Exchange to MS CRM

Hello all,
Microsoft Dynamics CRM 2013 receives all mail since it was activated, the emails were in Outlook before CRM be active not appear.
I do not have the backup of independent Outlook but Microsof Exchange Server.
How do I import mail from Exchange to CRM?
Please would like response!
Many thanks
Best regards

1. CRM is not a backup for Exchange. So while I get while there can be business value of old email in CRM, don't treat it like a backup system.
2. If you use the Dynamics CRM Outlook Plugin, as a user you can just go back to your old email archive and click "Track in CRM". This will also give you the granularity of what's relevant and what's not for storing in CRM.
The postings on this site are solely my own and do not represent or constitute Hitachi Solutions' positions, views, strategies or opinions.

AppleScript to redirect mail from Exchange to mail

Can somebody point me to AppleScript samples that would allow me to redirect mail from Exchange to my Gmail account? (I can't use rules in Mail because Exchange doesn't allow redirect.)

This post doesn't involve applescript. You could look into one of these options. Do not know if they work with exchange or not. The idea is that they log into your account and forware email to another account of yours.
What soda3 does is connect to your email server before you do. It filters out the junk mail. It passes the "good stuff" on to you.
http://www.soda3.com/iphone
Don't know how this works, but makes greats claims. Maybe it works like soda3. There is a fee.
https://itunes.apple.com/us/app/spamdrain/id346767120?mt=8

Mail for Exchange already in use error when sendin...

We have a number of Nokia E50-1 on Vodafone network which we are using Mail for Exchange 2.5.3 (mfe) to sync emails with a microsoft Small Business Server 2003 (SBS2003). When we try to reply or send a new email from the E50 we get the error "Mail for Exchange: Already in use". This happens even if the sync is set to manual and email is set to send with next sync. Very ocassionally a message will go if we keep retrying.
Does anyone know how to resolve this?

hi all,
great forums, hopefully someone has some more info on this, as i am getting the same issue.
I had mail for exchange working with my e71 no worries and then i added my home TPG account. the TPG account would not work for some reason, not that it overtly worried me, but then when i tried sending mail through exchange (either reply or new mail) i get the error message 'Mail for exchange: already in use'
I have removed the TPG account, rebooted the thing several times, all sorts of stuff - nothing seems to work. it is still syncing and i am receiving email, i just can't send...!!
any troubleshooting tips or further info would be greatly appreciated

Blocked using Blocklist 1

Dear support,
One of our domain accounts was hacked and used to send out spam.
This issue has been resolved days ago.
We still get the following message when we try to send mail:
You do not have permission to send to this recipient. For assistance, contact your system administrator.
<baanmeubelen.nl #5.7.1 smtp;550 5.7.1 Service unavailable; Client host [82.161.66.211] blocked using Blocklist 1; To request removal from this list please forward this message to [email protected]>
We followed the instructions more than a few times and got a response aswell (with case number).
But it's been for days now and we're still being blocked.
Is there anything we can do to get our IP 82.161.66.211 delisted from the Microsoft Blocklist?
Thanks in advance.
Kind regards,
Paul.

Hi Paul,
First, please investigate and resolve any malicious activity, malware, or virus issues that could cause spam activity from the email address that is sending the email messages.
Then, please contact FOPE Support to remove the sender's email address from the Blocked Sender list. This procedure is known as "delisting." Detailed steps as below:
1.
https://support.live.com/eform.aspx?productKey=mocpexforefront&ct=eformts&scrx=1&brand=mocp&brandtry=1
2. Please choose "Delisting Requrest" under "what type of problem..." and they will address your issue fully. Thank you for your understanding.
For no response from [email protected], we will contact our internal team to check this issue. Thank you for your reporting it.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Mails From Exchange 2013 are received as SPAM

Hello,
We have Exchange 2013 configured to send and receive mails internally and externally. Everything is going great except the fact that the mails sent FROM our Exchange 2013 are received as SPAM. For example, I send an email from exchange to my gmail account
(generally to any EXTERNAL receipt). I receive the mail in the SPAM folder.
Any ideas Please !!

Hi,
Firstly, I’d like to recommend you find out exactly what the problem is and resolve it before bothering to delisting from the blacklist.
And based on my knowledge, there are the following reasons:
1. Exchange Server is pumping out SPAM emails because a mailbox password was compromised:
Please figure out which mailbox user is the culprit by looking over event viewer logs and change the password. Then clear email queue and see if any new spam emails are generated, if the change of password stops the flow of SPAM email, we can remove the domain
name from the blacklist.
2. One of our computers are infected with a mass mailing worm virus:
We can check our firewall log
For information about removing from blacklist, you can refer to the following similar thread:
http://social.technet.microsoft.com/Forums/en-US/b3b818a6-641a-4264-87ca-fa4183ffc50c/how-to-remove-my-ip-address-fro-blacklist?forum=exchangesvrsecuremessaginglegacy
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Mail from Exchange account not deleting

I have Exchange 2010, SP1 using iPhone to connect to the Exchange Server everything works fine. Except that when I'm on the workstation and delete the message from my inbox, it will never delete off the iPhone.
I get mail fine, the push is working as expected. It just will never delete messages after they've been deleted off the workstation. Help is appreciated.

James R, GoDaddyGuy,
I REALLY appreciate your help as none of the online articles I found on your website had those settings.
I made the changes, but unfortunately that did not help. Also, I was on the phone last night with GoDaddy technical support for a long time to no avail. The tech suggested I submitted a support ticket. I did and received back a list of articles. I went through all of the relevant articles but they were also of no help (everything suggested was already set up correctly or had been tried already).
I'm really at my wits end on this. With my mailbox growing on three devices, it is a bit of a nightmare for me. I would need to delete each email on the server and on all three devices to keep from getting out of control. Any help you can provide would be appreciated.
Thanks,
Mike

Having issues receiving mail from exchange account

I have 3 iPhone customers that are having issues with recieiving mail from their exchange accounts. The only time their emails come to their phones is when they actually has Outlook open on their computers. If Outlook is NOT open on the computers none of them not recieve emails on their phones. I have checked the settings on each of their phones and everything looks to be configured correctly. Any ideas, suggestion? Could this be a exchange server side issue?
Thanks

Different from a Blackberry, the iPhone's Mail app communicates direct with the incoming mail server and outgoing mail server for an email account - no different from accessing an email account with an email client on your computer.
Most, if not all internet service providers block the use of SMTP servers that are outside of their network or that isn't provided by the ISP being used for your internet connection at the time. Your iPhone's carrier is no exception when connected to the internet with your carrier's network.
Do you know if the account's SMTP server is authenticated with a user name and password just as the incoming mail server for the account is authenticated?

Fetching of attached files delayed, minutes-hours in Outlook 2011 for Mac from Exchange online

Hi,
I have an annoying problem I would be grateful if someone could solve.
I run Outlook 2011 for Mac which is synced towards Microsoft Exchange online. Everything works well except when there are attached files in incoming emails. Sometimes it can take up to hours before an attached file is available (the email as such is
available immediately), however luckily it is mostly done within 5-10 minutes. Meanwhile the notification bar switch between "Awaiting synchronisation for this folder" and "Fetching attached files...". There is no actual difference between
larger and smaller files and there is also no problem sending emails with attached files, they are sent immediately.
I have tested in different locations with good connections to rule out unstable internet connection without success.
Thanks for any help with this issue!

Hi,
Since this is the forum supporting Office for Windows, if you want to receive more information about Office 2011, I recommend you post this problem in Office for Mac forum:
http://answers.microsoft.com/en-us/mac
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners
who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Retrieving Mails from Exchange or from outlook 2010 using TSQL

Hi,
Will you please provide step by step queries to retrieve mails from directly from Exchange Server or else retrieving mails from the outlook 2010 which is connected Exchange Server.
I have SQL Server 2012 developer edition, outlook 2010 and no idea what version of Company Exchange Server available.
I google this solution but not successful. Mostly example i found old Exchange or SQL Server 7.0
Thanks.

Hi Visakh,
Will you please assist here :
EXEC sp_addlinkedserver 'exchange',
'Exchange OLE DB provider',
'exoledb.DataSource.1',
'file:\\.\backofficestorage\localhost\public folders'
- I don't have "Exchange OLE DB Provider"(exoledb.DataSource.1) in my Linked Server connection, from where can I download so that it can view in SQL Server Linked Servers.
Will you please let me know the path('file:\\.\backofficestorage\localhost\public folders'), what exactly it is. Is it .pst/.ost file location.
Thanks.
Best Regards
Kashif Chotu

NO INCOMING POP MAIL from exchange 2003 server.-

My university uses a exchange 2003 server for mail and pop access is enabled on all professor accounts. Since a couple of weeks ago I had no problem at all with my university mail account on apple mail, although I had to use :
incoming mail server: "mail.myuniversity.edu.do"
user: "DOMAIN\username"
Password: "mypassword"
Authentication: Password
After december the 5th I'm not getting any mail at all, even thou the activity monitor says "incoming messages.... 83 of 83" but no message shows up on the inbox. I have noticed that the number keeps growing (84, 85, 86...) but still no message in my inbox.
the weird thing is that I'm able to see my university mail in my iphone using the synced account settings in Itunes. I thought it was a problem of my machine I have made a clean format and reinstall of osX 10.6 with the 10.6.2 combo update. I did not transfered files nor configuration, just copied my documents and reconfigured mail from scratch. I did not imported any message. After all that, the problem persist.
I have used Connection Doctor and everything looks ok. The Detail window shows this:
******************************** BEGIN OF LOG ********************************
CONNECTED Dec 25 20:37:28.201 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
CONNECTED Dec 25 20:37:28.216 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
READ Dec 25 20:37:28.648 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
+OK Microsoft Exchange Server 2003 POP3 server version 6.5.7638.1 (SvrMailAdm.rsta.pucmm) ready.
WROTE Dec 25 20:37:28.656 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
USER RSTA\sterlingjimenez
READ Dec 25 20:37:28.682 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
220 mail.pucmm.edu.do Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at Fri, 25 Dec 2009 20:38:10 -0400
WROTE Dec 25 20:37:28.695 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
EHLO [10.0.1.33]
READ Dec 25 20:37:29.012 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
+OK
WROTE Dec 25 20:37:29.019 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
PASS ***********
READ Dec 25 20:37:29.030 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
250-mail.pucmm.edu.do Hello [200.88.1.167]
250-TURN
250-SIZE
250-ETRN
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-8bitmime
250-BINARYMIME
250-CHUNKING
250-VRFY
250-X-EXPS GSSAPI NTLM LOGIN
250-X-EXPS=LOGIN
250-AUTH GSSAPI NTLM LOGIN
250-AUTH=LOGIN
250-X-LINK2STATE
250-XEXCH50
250 OK
WROTE Dec 25 20:37:29.036 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
AUTH LOGIN
READ Dec 25 20:37:29.391 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
+OK User successfully logged on.
WROTE Dec 25 20:37:29.397 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
QUIT
READ Dec 25 20:37:29.436 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
334 VXNlcm5hbWU6
WROTE Dec 25 20:37:29.447 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
UlNUQVxzdGVybGluZ2ppbWVuZXo=
READ Dec 25 20:37:29.823 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
+OK Microsoft Exchange Server 2003 POP3 server version 6.5.7638.1 signing off.
READ Dec 25 20:37:29.927 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
334 UGFzc3dvcmQ6
WROTE Dec 25 20:37:29.954 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
READ Dec 25 20:37:30.410 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
235 2.7.0 Authentication successful.
WROTE Dec 25 20:37:30.425 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
QUIT
******************************** END OF LOG ********************************
Can Anyone HELP ?
I'm Out of ideas.
Best Regards,
Sterling Jiménez R.

Hello metalcraft,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
OS X Mountain Lion: Cannot connect to Exchange server in Mail after upgrading
http://support.apple.com/kb/TS4363
If you have issues connecting to the Exchange server or don't know what server addresses to use, contact your Exchange administrator or IT administrator.
Best of luck,
Mario

Mail 2.1.1: Can't read mails from Exchange server

Effect: *Mail 2.1.1* contacts the Exchange server successfully, which I checked with the operator, looking directly over his shoulder, but Mail 2.1.1 does not load any e-mails. Mail 2.1.1 loads down mails from another server with unknown software (gmx.de) successfully.
Mail 2.1 works nicely with absolutely identical settings with both mail servers
I am using Mail 2.1.1/MacOS 10.4.10 on my G4 and MacBook Pro, Mail 2.1/MacOS 10.4.10 on my G5.

No solution found - works again. Please no questions.

Mails from Exchange 2013 to Exchange Online blocked using Blocklist 1

Similar Messages

Maybe you are looking for