Mails getting delayed in SAP

Dear All,
In our SAP environment I have configured SCOT.Now when I am sending the mail it is not going immediately.
Instead of this it is getting delivered after 6-10 days.
I have checked the SCOT configuration and it is fine.
When I checked tcode SOST(overview of send orders).
It is showing msg 672(status 'yellow")..wait for communication service.
Is there something I am missing at the SAP level or there is some problem from the network side..?And if it is a network issue how to prove it as our network team is saying mail is released from SAP side to SMTP server.
Your suggestions will be greatly obliged.
Regards,
PG

Theres several things that can cause delays...
SAPConnect job is not running frequently enough... usually people set the job to run every 5-10 min
Check that the timezone is correct in both SAP and SMTP Server
Check with your SMTP Server admin that jobs are going through without issues, also that the relay agent is setup correctly on the SMTP Server.
Regards
Juan

Similar Messages

Mail getting delayed up to a day.

Hi all-
I'm having a weird problem where incoming mail is getting delayed sometimes upto a day. I can see in the logs that the mail is being sent and cryus delivering the message to the appropriate mailbox, yet the user doesn't get the message for sometimes until a day later. can anyone offer a solution? I'm running 10.4.10
nick

https://wiki.mozilla.org/Thunderbird:Testing:Antivirus_Related_Performance_Issues#McAfee

TS3276 I get Apple Mail through having activated POP in gmail. Since a week, when I click on "Get Mail", after a delay I see brielfly flashing "Incoming message 70 etc." but it dissapears and no mails gets downloaded. How to proceed?

I get Apple Mail through having activated POP in gmail. Since a week, when I click on "Get Mail", after a delay I see brielfly flashing "Incoming message 70 or whathever the number in waiting is." and the green band extends to the end of the line in a fraction of a seconde, but then dissapears and no mails gets downloaded. It is not a matter of password etc.. that are all OK. Strangely, yesterdays, some email did come through after a few days of failure, but not anymore. Could it be related to hacking or something like that? Any thing I could try?
I have OX 10.6.8.
Many thanks for your kind suggestions

Maybe these will help:
https://discussions.apple.com/message/17677533#17677533
https://discussions.apple.com/message/18324129#18324129
https://discussions.apple.com/message/18203126#18203126

E-mail trigger delay - Time Zone (CET) ahead of System Time (UTC)

Hi,
We have developed a Z program which triggers e-mail whenever the critical System / Interface user id gets locked in the SAP Netweaver System. However, the e-mail is generated by the program in the Time Zone which is in CET and sits in t-code SOST and is sent to our mailbox in System Time which is in UTC (GMT) which is currently 2 hours behind. Hence, there is a delay of 2 hours for generated e-mail alert to be sent to our mail box. Is there any process to avoid this delay?
In the test system manually we can reduce the wait time by 2 hours in t-code SOST and then the mail gets triggered immediately. But can this be achieved programmatically so that the time in which e-mail gets generated always displays the system time in t-code SOST. Or, is there is a configuration where the e-mail is sent to our mail box from t-code SOST in Time Zone (CET) itself and not wait till the displayed time reaches System Time (UTC).
Thank you very much for your earliest response.
Regards,
SANJEEV KUMAR

In t-code STZAC both System Time and Useru2019s Default Time Zone is same (CET).
However, when I see in the menu System->Status I find the System Time is displayed in UTC, while Time Zone is in CET.
In other clients where system time is displayed in CET, there is no problem. The e-mail spool from SOST which displays CET time is actually triggered in the System Time. In case the System Time is CET, mail is triggered immediately. In case System Time is UTC, it waits UTC time to reach the displayed CET time, which is currently of 2 hours gap.
Is it possible to change the system time of the problematic client to CET to solve this problem. Please let me know what configuration can be done for this.
Regards,
SANJEEV KUMAR

File getting Delayed

Hi,
My scenario is that daily I am getting one file at a specified time but sometime that file gets delayed by 3 hour or 4 hours.
when I check log in moni I get following.
Where I can see that the message took time in DB_ENTRY_QUEUING.
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="cipip">20090830133000.143302</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="cipip">20090830133000.143309</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="cipip">20090830221511.553973</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_XML_VALIDATION_RQ_INB</SAP:Name>
<SAP:Timestamp type="begin" host="cipip">20090830221511.557395</SAP:Timestamp>
Can somebody please suggest what this problem is as I am facing this problem only for this particular inteface.
Regards,
Nidhi

Hi Nidhi,
No you are looking at the Perfomance node of SOAP Header. There you will not find the Queue into which this interface message went.
Either check SAP:QIdInternal parameter in Runtime (in SOAP Header) or in SXMB_MONI scroll toward right and see the column Queue ID.
See whether all messages of this interface goes to the same queue, if yes then check sxmb_admin to see whether some queue configuration is made for this queue (which is resulting in the delay)
Regards
Suraj

For whatever reason, I am frequently getting delays in seeing the characters after I type.

For whatever reason, I am frequently getting delays in seeing the characters after I type when using Firefox- ie- Firefox, G mail, etc- but not when using other apps like Skype. I have downloaded the latest add-ons and Flow Scroll w no improvement and moved the remote sensor closer to the keyboard and changed the batteries numerous times but because the issue is with only certain programs I wonder if it is Firefox that is having the problem? Thanks in advance for your help~ Jim

You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox profile folder.
*Help > Troubleshooting Information > Profile Directory: Show Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Multiple_profile_files_created
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them).
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

SCOT - How to send a mail from mail server to a SAP system

Dear SAP colleagues,
With SCOT you can configure the SAPConnect administration.
You can easily configure your SAP system to allow the send of email from SAP to your mail server.
Exemple :
1. SID SAP : DL1
2. Mail server : sn1exch.lec.local
3. Target email : "myeamailaddress"
Send email process 01 : 1. DL1 ==> 2. Mail Server ==> 3. You read your email in your inbox "myeamailaddress"
My problem :
From my inbox "myeamailaddress", I want to be able to send email to SAP (Dl1).
Send email process 02 : 1. My inbox "myeamailaddress" ==> 2. Mail Server ==> 3. SAP (DL1).
Question :
Do you have any help to configure it ?
Thanks in advance for your input.
Best regards
NetWeavAdmin

Dear Olivier,
I do not have a specifi technical problem.
Let's summarize - my request concerns a SRM Workflow :
I am ordering an article. When the order is higher than 2'000 USD, I need to get the approval of my manager.
That's the workflow.
Workflow :
1. I am user in DL1 SAP System.
    UserName : CharlesN
    In SU01,
    charles(a)green.com
2. From DL1 SAP system, I order articles. The order total amount is higher than 2'000 USD.
    In the workflow, an mail from DL1 is automatically send to my manager in his MS-Outook inbox.
    (manager(a)green.com)
3. My manager reads the mail I have sent him and give his approvals by clicking on a approvals button.
    When clicking the button, an mail must be automatically send from my manager MS-Outlook inbox
    to DL1 to CharlesN inbox in SBWP in DL1 SAP system.
I have configured SCOT and read OSS Note 455140.
The SAPconnect virtual host is activated in DL1 (SICF).
I think a miss a step in our mail server to relay a mail from MS-Outlook to my SAP system.
Any suggestion is welcome.
Best regards

Work flow mails not processing from SAP Outbox to Approvers

Hello,
We are working on the implementation of Work flow for Purchase orders.
Work flow customization is completed and even work flow is triggering when ever I create Purchase Order.
Even Agent assignment also completed for work flow tasks via T code PTFC_CHG.
Problem here is Work flow mails are not processing out of SAP Outbox to approvers even also after executing the program RSWUWFML2.
If I check in SOST,I will not see any of the entries related to work flow mails.
For eg:If I creates a Purchase order it will trigger Release Strategy and I can see the message to Approvers,like "Please Approver PO..."
Only above I can see in my SAP Outbox.
So how can I Process these messages to approvers SAP Inbox.
Any Pre Setting I have to do?
With regards,
SPK

Hi SP,
I may be wrong, but on reading ur thread, I feel u r mis interpreting SAP Outbox with Outlook.
Is it so, because u have mentioned about RSWUWFML2 and SOST, which comes into picture only if u r using an external mail like Outlook.
If its Outlook, then there is no doubt that ur work item would get deleted from SAP Inbox and would be present only in Outlook.
If its SAP Outbox, then u r not supposed to get ur work item in ur Outbox unless it is processed or executed thru ur SAP Inbox.
Hope it helps.
Aditya
Edited by: Aditya Varrier on May 23, 2008 1:52 PM

Incorrect time of CCMS alerts, alerts getting delayed by more than a day

Hi All,
We have SOLMAN 4.0 and configured the autoreaction method for alert on e-mail centrally on SOLMAN for a client in DEV(100). The configuration is correct and we are able to receive the CCMS alerts, however, the alerts are getting delayed by more than a day. Alerts are getting generated every 3-5 minutes and in the central autoreaction method zCCMS_OnAlert_Email_Central i have added a parameter TIME_ZONE and gave the value as PST as our servers are all on PST.
The following is an example of the alert that I received:
ALERT for DEV \ Workload Collector \ Workload Collector Frame \ Collectorframe Messages at 20070910 215114 ( Time in UTC )
System: DEV at 20070910 145114 ( Time in PST ) RED CCMS alert for monitored object Collectorframe Messages Alert Text:Determination of component from SCR failed System:DEV Segment:SAP_CCMS_e47dev_DEV_00 MTE:DEV\Workload Collector\Workload Collector Frame\Collectorframe Messages Client:000 User:DDIC
Severity: 0
I received the above alert at 15:45 after changing the "set wait time" to 15:30. However, in Tx. SOST, this alert was supposed to reach at 23:52 on 2007 09 10 which is like almost a day to receive the alert?
Is this any configuration issue? The job which was scheduled to run every 3 minutes in SCOT to send e-mails is running fine without any delay.
Please help me!!!

> Hi All,
> We have SOLMAN 4.0 and configured the autoreaction
> method for alert on e-mail centrally on SOLMAN for a
> client in DEV(100). The configuration is correct and
> we are able to receive the CCMS alerts, however, the
> alerts are getting delayed by more than a day. Alerts
> are getting generated every 3-5 minutes and in the
> central autoreaction method
> zCCMS_OnAlert_Email_Central i have added a parameter
> TIME_ZONE and gave the value as PST as our servers
> are all on PST.
>
> The following is an example of the alert that I
> received:
>
> ALERT for DEV \ Workload Collector \ Workload
> Collector Frame \ Collectorframe Messages at 20070910
> 215114 ( Time in UTC )
> System: DEV at 20070910 145114 ( Time in PST ) RED
> CCMS alert for monitored object Collectorframe
> Messages Alert Text:Determination of component from
> SCR failed System:DEV Segment:SAP_CCMS_e47dev_DEV_00
> MTE:DEV\Workload Collector\Workload Collector
> Frame\Collectorframe Messages Client:000 User:DDIC
> Severity: 0
>
> I received the above alert at 15:45 after changing
> the "set wait time" to 15:30. However, in Tx. SOST,
> this alert was supposed to reach at 23:52 on 2007 09
> 10 which is like almost a day to receive the alert?
>
> Is this any configuration issue? The job which was
> scheduled to run every 3 minutes in SCOT to send
> e-mails is running fine without any delay.
>
> Please help me!!!
Any ideas on the above issue?

Sent email gets delayed without reason

Hi everyone!
I have been having an obnoxious problem with the Mail app on my iPad: whenever I send an e-mail, it gets delayed without any apparent reason. This has been happening for a week without any change made to the iPad whatsoever. This is what happens:
- I write and (actually) send a new e-mail.
- The e-mail leaves: it makes de woosh it usually makes when it is sent, it doesn't show up in the Drafts section nor the process bar is frozen. It is correctly sent.
- Several hours later (up to 4 hours!) it arrives its destination.
This has been happening with every account I have: gmail, an institutional account, my own website account (1&1), etc. I have tried to solve it by following every step suggested in the Apple Support website, but it made no difference. I have even deleted an account and set it up back again.
Maybe it's not a major issue (the iPad runs perfectly appart from it), but it is really annoying. Plus, some times I forget about it and I write and send quite a long e-mail that doesn't arrive to its adressee for a long time, so I have to write it back and send it via webmail.
I hope someone can give me a hand with it. Thank you very much in advance.

Looks to me like the anti-virus scanner, amavis. The clue is the line:
postfix/smtp[69038]: 942814AD55B: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1\]:10024, delay=0.25, delays=0.1/0.01/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as C611B4AD568)
where the 10024 is the default port that Amavis runs on. Postfix is configured to pass mail through this port, and queues the mail until Amavis is available.
My guess, therefore, is that Amavis is set to run under your account rather than under the system, which is why it only runs when you're logged in. Off hand I have no idea how you managed this and that makes it hard to work out how to fix it. I'd start by looking for org.amavis.amavisd.plist in /System/Library/LaunchDaemons, /Library/LaunchDaemons and ~/Library/LaunchDaemons (it should be in the former, but if its in the latter that could explain it.

Form not getting displayed in sap b one

I have created a form using screen painter.But it is not getting displayed in sap b one.When I debugged the form it doesnot show any error.

Option Strict Off
Option Explicit On
Friend Class frmEmployee
    Private WithEvents SBO_Application As SAPbouiCOM.Application
    Private objForm As SAPbouiCOM.Form
    Public Sub New()
        MyBase.New()
        '// set SBO_Application with an initialized application object
        SetApplication()
        LoadFromXML("frmEmployee.xml")
        'LoadFromXML("MySimpleFormxml")
        '// Get the added form object by using the form's UID
        objForm = SBO_Application.Forms.Item("F_4")
        '// Show the loaded Form
        objForm.Visible = True
        '// Saving the Form as an XML file
        '// although it already exist as an XML file
        '// it is good for practice
        'SaveAsXML(objForm)
    End Sub
    Private Sub SetApplication()
        '// Use an SboGuiApi object to establish connection
        '// with the SAP Business One application and return an
        '// initialized appliction object
        Dim SboGuiApi As SAPbouiCOM.SboGuiApi
        Dim sConnectionString As String
        SboGuiApi = New SAPbouiCOM.SboGuiApi
        '// by following the steps specified above, the following
        '// statment should be suficient for either development or run mode
        sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
        '// connect to a running SBO Application
        SboGuiApi.Connect(sConnectionString)
        '// get an initialized application object
        SBO_Application = SboGuiApi.GetApplication()
    End Sub
    Private Sub LoadFromXML(ByRef FileName As String)
        Dim oXmlDoc As Xml.XmlDocument
        oXmlDoc = New Xml.XmlDocument
        '// load the content of the XML File
        Dim sPath As String
        'sPath = IO.Directory.GetParent(Application.StartupPath).ToString
        sPath = "D:\Final\Forms"
        oXmlDoc.Load(sPath & "\" & FileName)
        '// load the form to the SBO application in one batch
        SBO_Application.LoadBatchActions(oXmlDoc.InnerXml)
    End Sub
    Private Sub SaveAsXML(ByRef Form As SAPbouiCOM.Form)
        Dim oXmlDoc As Xml.XmlDocument
        Dim sXmlString As String
        oXmlDoc = New Xml.XmlDocument
        '// get the form as an XML string
        sXmlString = Form.GetAsXML
        '// load the form's XML string to the
        '// XML document object
        oXmlDoc.LoadXml(sXmlString)
        Dim sPath As String
        'sPath = IO.Directory.GetParent(Application.StartupPath).ToString
        sPath = "D:\Final\Forms"
        '// save the XML Document
        oXmlDoc.Save((sPath & "\frmEmployee1.xml"))
    End Sub
End Class

When I send or receive e-mail, the mail gets changed significantly from its' original form.....typestyle, size of letters, symbols, page layout, color, everything changes.....is there a way to fix that?.....

When I send or receive e-mail (Thunderbird).....the mail gets changed significantly from its original form.....typestyle, font size, symbols, page layout, color.....everything changes.....is there a way to fix that so my the original form of the mail is not changed?.....

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

SOAP to IDocs Scenario...IDocs getting locked at SAP

Dear Experts
We are sending measuring point details to SAP system from 3rd Party. Scenario is working fine for small amount of load. If more number of messages triggered (say 100) IDocs at SAP are getting stuck u201CMeasPoint 10000211 currently locked -> document processing not possibleu201D.
I tried configuring Sender SOAP adapter as EOIO and specified the Queue name as Test Queue. Still IDocs are getting stuck at SAP ECC. Now one more issues messages are getting stuck in queue SMQ2. We can control the flow by using BPM in PI. I donu2019t want to use BPM for this. Can we control this from SAP or using Trigger by background program in Partner profiles?
Please suggest. Thank You.
SAP Error Details:-MeasPoint 10000211 currently locked -> document processing not possible
Message no. IR007
Diagnosis
The object you want to access is locked, either
u2022     By yourself in another session, or
u2022     By another user
u2022     or by the system, which is still processing data for this object
System Response
The system cannot access the object.
Procedure
u2022     If you are locking the object yourself in another session, exit processing in the other session and continue processing in this session.
u2022     If the object is locked by another user, you can
o     contact the other user
o     wait until the other user has finished processing the object
u2022     If the object is locked because the system is still processing its data, wait a while, and then call up the object again.

1. Create a new process code "Z" and check the enque state of the objects before passing back to standard processing modules. Id also change to process immediate as part of this change
or
2. I think assuming RBDAPP01 is still used you may be able to make use of an exit there to do the same thing .. check and wait before processing.
or
3. In message mapping place a UDF that has some kind of wait timer in it (this is random and wont always work cause you wont know when the lock is dropped) but should work.
or
4. Dont use IDOC's create an abap proxy to do the work as a sync process. Processing will need to finish in the proxy and return to the PI stack before the next message is processed in the EOIO queue - this would be the prefered option as far as im concerned, it guarenteed to work and as long as your proxy sticks to the standard rouintes it should be upgrade friendly.
or
5. Use a proxy as above but dont do any processing, just use the proxy to build the IDOC and post it - then check the status of the locks until you are ready then rinse and repeat ..... but like scratching your right ear with your left hand .. but it will work.

STDMES field in EDI _DC40 value is not getting reflected in SAP R/3

Hi All,
We have a EDI to IDOC scenario.
In message mapping we are hardcoding EDI_DC40\STDMES = 812 in message mapping and in sxmb_moni in PI we can see this value getting populated in xml message but at SAP end in we02 it is blank.
Value is not getting populated in SAP.
Could you please provide inputs on this?
Thanks in Advance
Best Regards,
Harleen Kaur Chadha

Hi Harleen,
Please check Note SAP Note Number: 1331571 : IDoc adapter: Value STDMES is ignored
Regards,
Vikrant

What is a Business Process Repository and where do we get it in SAP?

Hi,
What is a Business Process Repository and where do we get it in SAP?

Hi,
Here is an another way to look at the BPR-Business Process Repository delivered by SAP.
1. Add the Web Dynpro application Business Process Repository (BPR) to your Favorites:
2. Choose Favorites Add Other Objects Web Dynpro Application in the SAP initial screen.
3. Enter SM_BPR_OVERVIEW in the field Web Dynpro Application.
4. Enter a description like ex. SAP BPR
5. Save your changes.
6. Now Call the saved - Web Dynpro application SM_BPR_OVERVIEW
7. You can see the BPR in a new browser window.
This info is available in SAP Help on Solution Manager.
Hope this helps.
Kathir

Mails getting delayed in SAP

Similar Messages

Maybe you are looking for