Mails with attachment are note really sent
When I send a message with an attachment from MAIL, even to myself, it goes out normally but people never receive it. Messages without attachments are sent succesfully.
Can anyone tell me what is going on???
THANKS
Generally, yes, JavaMail works with Exchange, but it does depend on the configuration
of your Exchange server.
There's lots of tools to schedule Java tasks. Pick one you like. Then write a task
that sends email.
You found the [JavaMail FAQ|http://java.sun.com/products/javamail/FAQ.html] , right?
Similar Messages
-
Sending E-mail with attachment within a loop not working.
Hi,
I'm trying to send e-mails with attachment to multiple users with "subject & an attachment" within an ITAB loop.
SUBJECT for each mail to corresponding user is being sent properly.
But ATTACHMENT contents are not being sent properly.
1st ATTACHMENT contents are going to 2nd user(supposed to go to 1st user) & 2nd ATTACHMENT contents are going to 3rd user etc..
in almost all attempts, last ATTACHMENT contents within the loop were delivered properly to the last user.
As a test, I'm debugging by sending with same "SUBJECT" & "ATTACHMENT CONTENTS". still it's not working.
Following is the code for sending mail with same "SUBJECT" & "ATTACHMENT CONTENTS".
I even refreshed the file contents for each record within the ITAB. Greatly appreciate any help.
assume that ITAB has a field GROUP with values 501, 502, 503 & 504.
SUBJECT is the subject of e-mail & DIST_LIST is the e-mail id of the corresponding user.
DATA:
MAIL_FILE(20) TYPE C,
MAIL_TEXT(200) TYPE C,
COMMAND(512) TYPE C,
DIST_LIST(425) TYPE C,
SUBJECT(60) TYPE C.
DATA: BEGIN OF ITAB OCCURS 0.
DATA GROUP LIKE /BI0/PGRP-GRP.
DATA: END OF ITAB.
LOOP AT ITAB.
SUBJECT = ITAB-GROUP.
IF ITAB-GROUP = '501'.
DIST_LIST = '[email protected]'.
ENDIF.
IF ITAB-GROUP = '502'.
DIST_LIST = '[email protected]'.
ENDIF.
IF ITAB-GROUP = '503'.
DIST_LIST = '[email protected]'.
ENDIF.
IF ITAB-GROUP = '504'.
DIST_LIST = '[email protected]'.
ENDIF.
clear MAIL_FILE.
clear MAIL_TEXT.
UNASSIGN <FILE1>.
CONCATENATE '/tmp/' SY-UNAME '.txt' INTO MAIL_FILE.
TRANSLATE MAIL_FILE TO LOWER CASE.
OPEN DATASET MAIL_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
MAIL_TEXT = ITAB-GROUP.
TRANSFER MAIL_TEXT TO MAIL_FILE LENGTH 200.
CLOSE DATASET MAIL_FILE.
clear MAIL_TEXT.
CONCATENATE '< ' MAIL_FILE INTO MAIL_TEXT SEPARATED BY SPACE.
ASSIGN MAIL_TEXT TO <FILE1>.
*Create UNIX MAIL Command
CONCATENATE 'mailx -s'
'"' SUBJECT '"' '"' DIST_LIST '"' <FILE1>
INTO COMMAND SEPARATED BY SPACE.
Send the E-mail
CALL FUNCTION 'RFC_REMOTE_EXEC'
DESTINATION 'SERVER_EXEC'
EXPORTING
COMMAND = COMMAND
EXCEPTIONS
OTHERS = 04.
ENDLOOP.Hi Zhenglin,
thanks for your reply.
Now, it's working after I changed attachment file name (user name) with ITAB-GROUP.
but, I'm not clear on why it was not working even if the file name is same in every loop, as I'm unassigning the file contents and loading new contents at the start of each loop.
anyhow, it's working and many thanks for your help. -
Apple MAIL e-mail with attachment not arriving in GMail accounts
Serious problem...
If I send an e-mail FROM my mac account TO a GMail account...
... No attachment: E-mail arrives
... With attachment: E-MAIL DOES NOT ARRIVE
I've tested this from my MAIL account to our principal on our school's GMail account.
I've tested this from my MAIL account to my own GMail account.
Repeatedly: if my MAIL-generated e-mail includes an attachement, it DOES NOT ARRIVE in GMail acocunts.
This is a serious problem...
Can anyone help?
Thanks.
Cat
PS Just did an experiment: sent a MAIL-generated e-mail with attachment to my GMail account -- e-mail arrived, but had been stripped of attachment. Immediately sent another MAIL e-mail with two small attachments -- it never arrived in my GMail account but the cc arrived immediately in my MAIL account with both attachments intact.I too am experiencing this behavior, however, for some reason that I do not know, the attachments appear ok one day and then they appear embedded. This is becoming detrimental to my work!
Is anyone looking into this at Apple?
C
--Boundary(IDD652jjiT9bsdspgfbLeNSA)
Content-type: application/msword; name=vzw-swd-mmsc.doc
Content-transfer-encoding: BASE64
Content-disposition: attachment; filename=vzw-swd-mmsc.doc
0M8R4KGxGuEAAAAAAAAAAAAAAAAAAAAAPgADAP7/CQAGAAAAAAAAAAAAAAABAAAA
PAAAAAAAAAAAEAAAPgAAAAEAAAD+////AAAAADsAAAD/////////////////////
///////////////////////////////////////////spcEAMyAJBAAA8BK/AAAA
AAAAEAAAAAAABAAAhCIAAA4AYmpiamSiZKIAAAAAAAAAAAAAAAAAAAAAAAAJBBYA
An e-mail message with a Word-attachment that was
sent by forwarding was not interpreted correctly by
Mail. The attachment is shown as inline undecoded
data:
--------------060401070608000609090303
Content-Type: application/msword;
name="linuxhandleiding.doc"
Content-Transfer-Encoding: base64
Content-Disposition: inline;
filename="linuxhandleiding.doc"
0M8R4KGxGuEA(...)
To reproduce this, I sent an e-mail with a Word
attachment to my own address, using Thunderbird on a
Linux machine. After that, I forwarded the received
message with the attachment again to my own address.
In Thunderbird, the forwarded message shows the
attachment correctly, but in Apple Mail (2.1), that I
use with the same e-mail account (IMAP), the original
message shows the attachment correctly, but in the
forwarded message it appears undecoded in the message
body (see above).
I searched the forum and found similar issues, but
not exactly what happens here. Also, no solutions
provided helped me to solve this problem. Any
ideas?
iBook G4 / Mac
mini G4 Mac OS X (10.4.7) Mail
2.1
PowerBook G4 Mac OS X (10.4.7) -
Impossible to sent mail with attachement created in pages
I am new with Mac
this morning i jsut tried to send email via mail with attachement creatad in pages
message could not be sent
I tried several time and received allways answer : something like refused by server
I tried to convert pages into word but still the same
I am not working on my mac for the moment to send message but can some help to solve this problem and tell me what to do
tksThe new Pages file format is a complicated zipped package which GMail, Google, Yahoo and up until recently DropBox have had trouble with.
Try sending it with Mail.
Peter -
Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages?
- Problem: I have 1400 e-mails with attachments that need to be converted into pdf and the attachments cannot be embeded.
System: PC Windows 7 using Acrobat X Prof. - Thank you!Hi ,
There is an option of embedding index for faster search while converting email to a PDF .
However I am not sure that will serve your purpose or not .
I would recommend you to get in touch with Microsoft support as well .
Meanwhile I'll work on it and get back to you in case I get a desired solution .
Regards
Sukrit Dhingra -
Workflow Notification Mails Are Not Being Sent
Hi
we are running 11.5.10.2 version , some times Workflow Notification Mails Are Not Being Sent , so how should i start diagnose this issue.
RegardsDear Hussein
thanks for your reply, below are the log messages from the todays file FNDCPGSC6854.txt
[May 12, 2009 1:21:12 PM AST]:1242123672450:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPOutboundProces
sor.send(Message)]:Problem encountered when sending to {[[=?UTF-8?B?2LXZhNin2K0g2LXYp9mE2K0g2LnYrNmE2Kf
Zhg==?= <[email protected]>]]} -> javax.mail.MessagingException: 451 Timeout waiting for client input
[May 12, 2009 1:21:12 PM AST]:1242123672451:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPMessageHandler
.sendMessages(String)]:MessagingException -> javax.mail.MessagingException: 451 Timeout waiting for cli
ent input
[May 12, 2009 2:03:48 PM AST]:1242126228129:Thread[inboundThreadGroup1,5,inboundThreadGroup]:0:-1:DAREB
S:172.30.2.45:-1:-1:UNEXPECTED:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.IMAPInboundProc
essor.moveMessage(Message, String)]:Unable to move message {null} -> javax.mail.StoreClosedException: *
BYE Microsoft Exchange Server 2003 IMAP4rev1 server version 6.5.7638.1 closing connection due to timeo
ut.
[May 12, 2009 2:17:01 PM AST]:1242127021657:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPOutboundProces
sor.send(Message)]:Problem encountered when sending to {[[=?UTF-8?B?2YXYp9ix2KrZhiDZgdmG2YrYsg==?= <mvi
[email protected]>]]} -> javax.mail.MessagingException: 451 Timeout waiting for client input
[May 12, 2009 2:17:01 PM AST]:1242127021658:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPMessageHandler
.sendMessages(String)]:MessagingException -> javax.mail.MessagingException: 451 Timeout waiting for cli
ent input
[May 12, 2009 3:49:02 PM AST]:1242132542705:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPOutboundProces
sor.send(Message)]:Problem encountered when sending to {[[=?UTF-8?B?2KfYtNix2YEg2KfZhNiz2YrYryDYp9it2YX
YryDYtNio2YQ=?= <[email protected]>]]} -> javax.mail.MessagingException: 451 Timeout waiting for clie
nt input
[May 12, 2009 3:49:02 PM AST]:1242132542705:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPMessageHandler
.sendMessages(String)]:MessagingException -> javax.mail.MessagingException: 451 Timeout waiting for cli
ent input
[May 12, 2009 4:03:08 PM AST]:1242133388437:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:UNEXPECTED:[fnd.wf.mailer.URLMIMETagListener]:oracle.apps.fnd.wf.mailer.URLMIMETa
gListener.editStyleRef(HTMLTagEvent, String) Making a connection to {http://oracle.kannon.com:8000/OA_
HTML/cabo/images/cache/cmbts.gif)} returned {404 - Not Found}. Leaving as a reference -
Why mails in iphone are not synchronize with my macbook? how can i make them synchronize? I am a new user of apple product just then i had realized these problem, please somebody help me. Thank you in advance!
Gmail can be setup as IMAP, however you have to set such up on all your devices:
http://support.google.com/mail/bin/static.py?hl=en&ts=1668960&page=ts.cs -
Mail notifications are not getting sent from a Calendar client
Mail notifications are not getting sent from a Calendar client
<p>
On the client, after creating an event and electing to send a mail notification,
the following error appears in a pop up box:
"module:mailmsg.ctp,label 190, service error"
Also, in the /users/unison/log/cws.log file on the Calendar Server, there is an
error from the corresponding time that the client receives one:
DEXOTEK ERRCODE Ox132B0 -> CWTCP_RemoteSecurityModified: RNC_SecurityModified
-> Request 0x443 for NodeId 10002,
status set to CANTSERVICE
Solution:
If this is only happening for one user, then check for the presence of a dbv.log
file in the /users/unison/log directory. If present this implies db corruption
and the /users/unison/bin/unidbfix tool should be run.
Note: For details on "unidbfix", please read the man page and also the online
Calendar Administrators Guide.I am having the exact same problem sending through a comcast smtp server to a mac.com email address:
Reporting-MTA: dns; qmta11.emeryville.ca.mail.comcast.net
so some problem they are having in emeryville today? I too am waiting for it to clear up. -
Problem in sending mail with attachment
Hi All,
I am using the function module <b>'SO_NEW_DOCUMENT_ATT_SEND_API1'</b> to send mail with attachment.
the program executes properly and shows a message <b>'Document Sent'</b>. But neither the sent mail appears in <b>'SOST'</b> nor I get it on the specified email id.
Below is my code:
<b>***</b> As attachment I am sending resume whose contents are stored in table 'ZResume' corresponding to personnel no.(pernr) and serial No.(srno).
<b>START OF PROGRAM</b>----
REPORT ZPTEST_SEND_MAIL_ATTATCHMENT.
DATA : w_name TYPE sos04-l_adr_name.
DATA: RESUME TYPE table of XSTRING with header line.
START-OF-SELECTION.
<b>* Data Declaration</b>
DATA:
l_datum(10),
ls_docdata TYPE sodocchgi1,
lt_objpack TYPE TABLE OF sopcklsti1 WITH HEADER LINE,
lt_objhead TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_objtxt TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_objbin TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_reclist TYPE TABLE OF somlreci1 WITH HEADER LINE,
lt_listobject TYPE TABLE OF abaplist WITH HEADER LINE,
l_tab_lines TYPE i,
l_att_type LIKE soodk-objtp.
WRITE sy-datum TO l_datum.
SELECT SINGLE RESUME FROM ZRESUME INTO RESUME
WHERE PERNR EQ '00001182'
AND SRNO EQ '1'.
APPEND RESUME.
<b>* Because RESUME may be of size RAW(1000)
and objbin is of size CHAR(255) we make this table copy</b>
CALL FUNCTION 'TABLE_COMPRESS'
TABLES
in = resume
out = lt_objbin
EXCEPTIONS
compress_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
Error in function module &1
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
<b>* Create the message and send the document.
Create Message Body</b>
<b>* Title and Description</b>
ls_docdata-obj_name = 'Resume'.
ls_docdata-obj_descr = 'Resume'.
<b>* Main Text</b>
lt_objtxt = 'Resume of the candidate' .
APPEND lt_objtxt.
<b>* Write Packing List (Main)</b>
DESCRIBE TABLE lt_objtxt LINES l_tab_lines.
READ TABLE lt_objtxt INDEX l_tab_lines.
ls_docdata-doc_size = ( l_tab_lines - 1 ) * 255 + STRLEN( lt_objtxt ).
CLEAR lt_objpack-transf_bin.
lt_objpack-head_start = 1.
lt_objpack-head_num = 0.
lt_objpack-body_start = 1.
lt_objpack-body_num = l_tab_lines.
lt_objpack-doc_type = 'RAW'.
APPEND lt_objpack.
<b>* Create Message Attachment
Write Packing List (Attachment)</b>
l_att_type = 'ALI'.
DESCRIBE TABLE lt_objbin LINES l_tab_lines.
READ TABLE lt_objbin INDEX l_tab_lines.
lt_objpack-doc_size = ( l_tab_lines - 1 ) * 255 + STRLEN( lt_objbin ).
lt_objpack-transf_bin = 'X'.
lt_objpack-head_start = 1.
lt_objpack-head_num = 0.
lt_objpack-body_start = 1.
lt_objpack-body_num = l_tab_lines.
lt_objpack-doc_type = l_att_type.
lt_objpack-obj_name = 'ATTACHMENT'.
lt_objpack-obj_descr = 'Resume'.
APPEND lt_objpack.
<b>* Create receiver list</b>
lt_reclist-receiver = '[email protected]'.
lt_reclist-rec_type = 'U'.
APPEND lt_reclist.
<b>* Send Message</b>
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = ls_docdata
put_in_outbox = ''
TABLES
packing_list = lt_objpack
object_header = lt_objhead
contents_bin = lt_objbin
contents_txt = lt_objtxt
receivers = lt_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0.
Document sent
MESSAGE ID 'SO' TYPE 'S' NUMBER '022'.
ELSE.
Document <&> could not be sent
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH ls_docdata-obj_name.
ENDIF.
<b>END OF PROGRAM</b>----
Can anybody tell me where I am making mistake?
Thanks in advance,
PragyaHi Pragya,
Refer the code below. It's working fine and try to match up the things from your program.
REPORT ZSAMPL_001 .
INCLUDE ZINCLUDE_01.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
*file_open_error = 1
*file_read_error = 2
*no_batch = 3
*gui_refuse_filetransfer = 4
*invalid_type = 5
*no_authority = 6
*unknown_error = 7
*bad_data_format = 8
*header_not_allowed = 9
*separator_not_allowed = 10
*header_too_long = 11
*unknown_dp_error = 12
*access_denied = 13
*dp_out_of_memory = 14
*disk_full = 15
*dp_timeout = 16
*OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
***INCLUDE ZINCLUDE_01 .
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
tables crmrfcpar.
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
data v_rfcdest LIKE crmrfcpar-rfcdest.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
FORM
FORM ml_saveforbp USING jobname jobcount.
Data
*data : yhead like yhrt_bp_head.
*DATA : ydocdata LIKE yhrt_bp_docdata,
*yobjtxt LIKE yhrt_bp_objtxt OCCURS 0 WITH HEADER LINE,
*yreclist LIKE yhrt_bp_reclist OCCURS 0 WITH HEADER LINE.
*DATA : seqnr TYPE i.
Head
*yhead-jobname = jobname.
*yhead-jobcount = jobcount..
*MODIFY yhrt_bp_head FROM yhead.
Doc Data
*ydocdata-jobname = jobname.
*ydocdata-jobcount = jobcount.
*MOVE-CORRESPONDING docdata TO ydocdata.
*MODIFY yhrt_bp_docdata FROM ydocdata.
Objtxt
*seqnr = 0.
*LOOP AT objtxt.
*seqnr = seqnr + 1.
*yobjtxt-jobname = jobname.
*yobjtxt-jobcount = jobcount.
*yobjtxt-seqnr = seqnr.
*MOVE-CORRESPONDING objtxt TO yobjtxt.
*MODIFY yhrt_bp_objtxt FROM yobjtxt.
*ENDLOOP.
RecList
*seqnr = 0.
*LOOP AT reclist.
*seqnr = seqnr + 1.
*yreclist-jobname = jobname.
*yreclist-jobcount = jobcount.
*yreclist-seqnr = seqnr.
*MOVE-CORRESPONDING reclist TO yreclist.
*MODIFY yhrt_bp_reclist FROM yreclist.
*ENDLOOP.
ENDFORM. "ml_saveforbp
FORM
FORM ml_fetchfrombp USING jobname jobcount.
*CLEAR docdata.
*REFRESH objtxt.
*REFRESH reclist.
*SELECT SINGLE * FROM yhrt_bp_docdata
*INTO corresponding fields of docdata
*WHERE jobname = jobname
*AND jobcount = jobcount.
*SELECT * FROM yhrt_bp_objtxt
*INTO corresponding fields of TABLE objtxt
*WHERE jobname = jobname
*AND jobcount = jobcount
*ORDER BY seqnr.
*SELECT * FROM yhrt_bp_reclist
*INTO corresponding fields of TABLE reclist
*WHERE jobname = jobname
*AND jobcount = jobcount
*ORDER BY seqnr.
ENDFORM. "ml_fetchfrombp
<b>Please reward points if it helps.</b>
Regards,
Amit Mishra -
Hello all.
I have a problem that i dont know how to resolve: I need to send an email to some adresses with an attachment ( an excel file stored on the server's drive) How can it be done?
The email has to be sent by a job that should do this operation each day.
Thank you,
Cristian.
Message was edited by:
Cristian Boartessee this
Sending mail with attachment
This program will allowed you to send email with attachment.
First, specify the attachment file from your local hardisk and execute.
Next, specify the sender email address and click the send button.
report y_cr17_mail.
data method1 like sy-ucomm.
data g_user like soudnamei1.
data g_user_data like soudatai1.
data g_owner like soud-usrnam.
data g_receipients like soos1 occurs 0 with header line.
data g_document like sood4 .
data g_header like sood2.
data g_folmam like sofm2.
data g_objcnt like soli occurs 0 with header line.
data g_objhead like soli occurs 0 with header line.
data g_objpara like selc occurs 0 with header line.
data g_objparb like soop1 occurs 0 with header line.
data g_attachments like sood5 occurs 0 with header line.
data g_references like soxrl occurs 0 with header line.
data g_authority like sofa-usracc.
data g_ref_document like sood4.
data g_new_parent like soodk.
data: begin of g_files occurs 10 ,
text(4096) type c,
end of g_files.
data : fold_number(12) type c,
fold_yr(2) type c,
fold_type(3) type c.
parameters ws_file(4096) type c default 'c:\debugger.txt'.
Can me any file fromyour pc ....either xls or word or ppt etc ...
g_user-sapname = sy-uname.
call function 'SO_USER_READ_API1'
exporting
user = g_user
PREPARE_FOR_FOLDER_ACCESS = ' '
importing
user_data = g_user_data
EXCEPTIONS
USER_NOT_EXIST = 1
PARAMETER_ERROR = 2
X_ERROR = 3
OTHERS = 4
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
fold_type = g_user_data-outboxfol+0(3).
fold_yr = g_user_data-outboxfol+3(2).
fold_number = g_user_data-outboxfol+5(12).
clear g_files.
refresh : g_objcnt,
g_objhead,
g_objpara,
g_objparb,
g_receipients,
g_attachments,
g_references,
g_files.
method1 = 'SAVE'.
g_document-foltp = fold_type.
g_document-folyr = fold_yr.
g_document-folno = fold_number.
g_document-objtp = g_user_data-object_typ.
*g_document-OBJYR = '27'.
*g_document-OBJNO = '000000002365'.
*g_document-OBJNAM = 'MESSAGE'.
g_document-objdes = 'sap-img.com testing by program'.
g_document-folrg = 'O'.
*g_document-okcode = 'CHNG'.
g_document-objlen = '0'.
g_document-file_ext = 'TXT'.
g_header-objdes = 'sap-img.com testing by program'.
g_header-file_ext = 'TXT'.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = sy-uname
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header
FOLMEM_DATA =
RECEIVE_DATA =
File from the pc to send...
method1 = 'ATTCREATEFROMPC'.
g_files-text = ws_file.
append g_files.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = g_owner
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header
method1 = 'SEND'.
g_receipients-recnam = 'MK085'.
g_receipients-recesc = 'B'.
g_receipients-sndex = 'X'.
append g_receipients.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = g_owner
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header.
*-- End of Program
<b>also try this one for background scheduling the same</b>
Sending mail with attachment report in Background
Pay attention because its working with output list from spool converted to pdf.
=================================================================================
z_send_email_fax_global
FUNCTION-POOL z_gfaian_mail_fax. MESSAGE-ID ..
WORK TABLE AREAS
TABLES: tsp01.
INTERNAL TABLES
DATA: lt_rec_tab LIKE STANDARD TABLE OF soos1 WITH HEADER LINE,
lt_note_text LIKE STANDARD TABLE OF soli WITH HEADER LINE,
lt_attachments LIKE STANDARD TABLE OF sood5 WITH HEADER LINE.
DATA: lt_objcont LIKE STANDARD TABLE OF soli WITH HEADER LINE,
lt_objhead LIKE STANDARD TABLE OF soli WITH HEADER LINE.
DATA: pdf_format LIKE STANDARD TABLE OF tline WITH HEADER LINE.
TYPES: BEGIN OF y_files,
file(60) TYPE c,
END OF y_files.
DATA: lt_files TYPE STANDARD TABLE OF y_files WITH HEADER LINE.
DATA: l_objcont LIKE soli OCCURS 0 WITH HEADER LINE.
DATA: l_objhead LIKE soli OCCURS 0 WITH HEADER LINE.
STRUCTURES
DATA: folder_id LIKE soodk,
object_id LIKE soodk,
link_folder_id LIKE soodk,
g_document LIKE sood4,
g_header_data LIKE sood2,
g_folmem_data LIKE sofm2,
g_header_data LIKE sood2,
g_receive_data LIKE soos6,
g_ref_document LIKE sood4,
g_new_parent LIKE soodk,
l_folder_id LIKE sofdk,
v_email(50).
DATA: hd_dat like sood1.
VARIABLES
DATA: client LIKE tst01-dclient,
name LIKE tst01-dname,
objtype LIKE rststype-type,
type LIKE rststype-type.
DATA: numbytes TYPE i,
arc_idx LIKE toa_dara,
pdfspoolid LIKE tsp01-rqident,
jobname LIKE tbtcjob-jobname,
jobcount LIKE tbtcjob-jobcount,
is_otf.
DATA: outbox_flag LIKE sonv-flag VALUE X,
store_flag LIKE sonv-flag,
delete_flag LIKE sonv-flag,
owner LIKE soud-usrnam,
on LIKE sonv-flag VALUE X,
sent_to_all LIKE sonv-flag,
g_authority LIKE sofa-usracc,
w_objdes LIKE sood4-objdes.
DATA: c_file LIKE rlgrap-filename,
n_spool(6) TYPE n.
DATA: cancel.
DATA: desired_type LIKE sood-objtp,
real_type LIKE sood-objtp,
attach_type LIKE sood-objtp,
otf LIKE sood-objtp VALUE OTF, SAPscript Ausgabeformat
ali LIKE sood-objtp VALUE ALI. ABAP lists
CONSTANTS
CONSTANTS: ou_fol LIKE sofh-folrg VALUE O,
c_objtp LIKE g_document-objtp VALUE RAW,
c_file_ext LIKE g_document-file_ext VALUE TXT.
=================================================================================
z_send_email_fax2
FUNCTION z_faian_mail_fax2.
Interface local:
* IMPORTING
* REFERENCE(SRC_SPOOLID) LIKE TSP01-RQIDENT
* REFERENCE(FAX_MAIL_NUMBER) TYPE SO_NAME
* REFERENCE(HEADER_MAIL) TYPE SO_OBJ_DES
* REFERENCE(OBJECT_TYPE) TYPE SO_ESCAPE
* TABLES
* LT_BODY_EMAIL STRUCTURE SOLI
* EXCEPTIONS
* ERR_NO_ABAP_SPOOLJOB
Fist part: Verify if the spool really exists
SELECT SINGLE * FROM tsp01 WHERE rqident = src_spoolid.
IF sy-subrc NE 0.
RAISE err_no_abap_spooljob. doesnt exist
ELSE.
client = tsp01-rqclient.
name = tsp01-rqo1name.
CALL FUNCTION RSTS_GET_ATTRIBUTES
EXPORTING
authority = SP01′
client = client
name = name
part = 1
IMPORTING
type = type
objtype = objtype
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4
OTHERS = 5.
IF objtype(3) = OTF.
desired_type = otf.
ELSE.
desired_type = ali.
ENDIF.
CALL FUNCTION RSPO_RETURN_SPOOLJOB
EXPORTING
rqident = src_spoolid
desired_type = desired_type
IMPORTING
real_type = real_type
TABLES
buffer = l_objcont
EXCEPTIONS
no_such_job = 14
type_no_match = 94
job_contains_no_data = 54
no_permission = 21
can_not_access = 21
read_error = 54.
IF sy-subrc EQ 0.
attach_type = real_type.
ENDIF.
CALL FUNCTION SO_FOLDER_ROOT_ID_GET
EXPORTING
owner = sy-uname
region = ou_fol
IMPORTING
folder_id = l_folder_id
EXCEPTIONS
OTHERS = 5.
fill out informations about the header of the email
CLEAR: g_document.
g_document-foltp = l_folder_id-foltp.
g_document-folyr = l_folder_id-folyr.
g_document-folno = l_folder_id-folno.
g_document-objtp = c_objtp.
g_document-objdes = header_mail.
g_document-file_ext = c_file_ext.
g_header_data-objdes = header_mail.
CALL FUNCTION SO_DOCUMENT_REPOSITORY_MANAGER
EXPORTING
method = SAVE
office_user = sy-uname
IMPORTING
authority = g_authority
TABLES
objcont = lt_body_email
attachments = lt_attachments
CHANGING
document = g_document
header_data = g_header_data
EXCEPTIONS
OTHERS = 1.
folder_id-objtp = l_folder_id-foltp.
folder_id-objyr = l_folder_id-folyr.
folder_id-objno = l_folder_id-folno.
object_id-objtp = c_objtp.
object_id-objyr = g_document-objyr.
object_id-objno = g_document-objno.
link_folder_id-objtp = l_folder_id-foltp.
link_folder_id-objyr = l_folder_id-folyr.
link_folder_id-objno = l_folder_id-folno.
REFRESH lt_rec_tab.
CLEAR lt_rec_tab.
lt_rec_tab-sel = X.
lt_rec_tab-recesc = object_type. This field for FAX/MAIL
lt_rec_tab-recnam = U-.
lt_rec_tab-deliver = X.
lt_rec_tab-not_deli = X.
lt_rec_tab-read = X.
lt_rec_tab-mailstatus = E.
lt_rec_tab-adr_name = fax_mail_number.
lt_rec_tab-sortfield = fax_mail_number.
lt_rec_tab-recextnam = fax_mail_number.
lt_rec_tab-sortclass = 5′.
APPEND lt_rec_tab.
lt_rec_tab-recextnam = fax_mail_number.
lt_rec_tab-recesc = object_type.
lt_rec_tab-sndart = INT.
lt_rec_tab-sndpri = 1.
APPEND lt_rec_tab.
lt_files-file = c_file.
APPEND lt_files.
begin of insertion by faianf01
hd_dat-objdes = header_mail.
CALL FUNCTION SO_ATTACHMENT_INSERT
EXPORTING
object_id = object_id
attach_type = attach_type
object_hd_change = hd_dat
owner = sy-uname
TABLES
objcont = l_objcont
objhead = l_objhead
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
object_type_not_exist = 17
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
x_error = 1000.
IF sy-subrc > 0.
ENDIF.
end of insertion by faianf01
send email from SAPOFFICE
CALL FUNCTION SO_OBJECT_SEND
EXPORTING
folder_id = folder_id
object_id = object_id
outbox_flag = outbox_flag
link_folder_id = link_folder_id
owner = sy-uname
check_send_authority = X
TABLES
receivers = lt_rec_tab
note_text = lt_note_text
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
component_not_available = 1
folder_no_authorization = 5
folder_not_exist = 6
forwarder_not_exist = 8
object_no_authorization = 13
object_not_exist = 14
object_not_sent = 15
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
too_much_receivers = 73
user_not_exist = 35.
ENDIF.
ENDFUNCTION.
=================================================================================
z_send_email_fax
FUNCTION ZCBFS_SEND_MAIL.
Interface local:
* IMPORTING
* REFERENCE(SRC_SPOOLID) LIKE TSP01-RQIDENT
* REFERENCE(HEADER_MAIL) TYPE SO_OBJ_DES
* TABLES
* LIST_FAX_MAIL_NUMBER STRUCTURE SOLI
* EXCEPTIONS
* ERR_NO_ABAP_SPOOLJOB
DATA: vg_achou(1) TYPE n.
Fist part: Verify if the spool really exists
vg_achou = 1.
DO 60 TIMES.
SELECT SINGLE * FROM tsp01 WHERE rqident = src_spoolid.
IF sy-subrc IS INITIAL.
CLEAR vg_achou.
EXIT.
ELSE.
WAIT UP TO 1 SECONDS.
ENDIF.
ENDDO.
IF vg_achou = 1.
RAISE err_no_abap_spooljob. doesnt exist
ENDIF.
client = tsp01-rqclient.
name = tsp01-rqo1name.
CALL FUNCTION RSTS_GET_ATTRIBUTES
EXPORTING
authority = SP01′
client = client
name = name
part = 1
IMPORTING
type = type
objtype = objtype
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4
OTHERS = 5.
IF objtype(3) = OTF.
desired_type = otf.
ELSE.
desired_type = ali.
ENDIF.
CALL FUNCTION RSPO_RETURN_SPOOLJOB
EXPORTING
rqident = src_spoolid
desired_type = desired_type
IMPORTING
real_type = real_type
TABLES
buffer = l_objcont
EXCEPTIONS
no_such_job = 14
type_no_match = 94
job_contains_no_data = 54
no_permission = 21
can_not_access = 21
read_error = 54.
IF sy-subrc EQ 0.
attach_type = real_type.
ENDIF.
CALL FUNCTION SO_FOLDER_ROOT_ID_GET
EXPORTING
owner = sy-uname
region = ou_fol
IMPORTING
folder_id = l_folder_id
EXCEPTIONS
OTHERS = 5.
fill out informations about the header of the email
CLEAR: g_document.
g_document-foltp = l_folder_id-foltp.
g_document-folyr = l_folder_id-folyr.
g_document-folno = l_folder_id-folno.
g_document-objtp = c_objtp.
g_document-objdes = header_mail.
g_document-file_ext = c_file_ext.
g_header_data-objdes = header_mail.
CALL FUNCTION SO_DOCUMENT_REPOSITORY_MANAGER
EXPORTING
method = SAVE
office_user = sy-uname
IMPORTING
authority = g_authority
TABLES
attachments = lt_attachments
CHANGING
document = g_document
header_data = g_header_data
EXCEPTIONS
OTHERS = 1.
folder_id-objtp = l_folder_id-foltp.
folder_id-objyr = l_folder_id-folyr.
folder_id-objno = l_folder_id-folno.
object_id-objtp = c_objtp.
object_id-objyr = g_document-objyr.
object_id-objno = g_document-objno.
link_folder_id-objtp = l_folder_id-foltp.
link_folder_id-objyr = l_folder_id-folyr.
link_folder_id-objno = l_folder_id-folno.
REFRESH lt_rec_tab.
LOOP AT LIST_FAX_MAIL_NUMBER.
lt_rec_tab-recextnam = LIST_FAX_MAIL_NUMBER-LINE.
lt_rec_tab-recesc = U.
lt_rec_tab-sndart = INT.
lt_rec_tab-sndpri = 1.
APPEND lt_rec_tab.
ENDLOOP.
lt_files-file = c_file.
APPEND lt_files.
hd_dat-objdes = header_mail.
CALL FUNCTION SO_ATTACHMENT_INSERT
EXPORTING
object_id = object_id
attach_type = attach_type
object_hd_change = hd_dat
owner = sy-uname
TABLES
objcont = l_objcont
objhead = l_objhead
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
object_type_not_exist = 17
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
x_error = 1000.
IF sy-subrc > 0.
ENDIF.
send email from SAPOFFICE
CALL FUNCTION SO_OBJECT_SEND
EXPORTING
folder_id = folder_id
object_id = object_id
outbox_flag = outbox_flag
link_folder_id = link_folder_id
owner = sy-uname
TABLES
receivers = lt_rec_tab
note_text = lt_note_text
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
component_not_available = 1
folder_no_authorization = 5
folder_not_exist = 6
forwarder_not_exist = 8
object_no_authorization = 13
object_not_exist = 14
object_not_sent = 15
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
too_much_receivers = 73
user_not_exist = 35.
ENDFUNCTION.
regards,
srinivas
<b>*reward for useful answers*</b> -
Sending mail with attachment fails on MAC Mail and WRP400.
Sending mail with attachment fails on MAC Mail and WRP400.
We have hundreds of WRP400 connected with Mac (Machintosh) computers. No special configurations are applied (no virtual server or DMZ). Web navigation, P2P programs and sending mail without attachment work right.
The problem is the impossibility to send mails with medium or big size files attachment from MAC Mail.
If we use Windows PCs or a different linksys routers (eg. WRT54G) the problem not happens.
We have upgraded WRP400 firmware version from 1.00.06 to 2.00.05 but the result is the same. Sending mail with attachment using Mac fails.
We tried to configure WRP400 with DMZ to a particular MAC. We tried to configure Virtual server on tcp 25 port of a MAC. The result is always the same.
This is a WRP400 bug? Windows PCs work right. MAC and MAC mail works right with other linksys router.
We need help. Thanks.The problem was fixed since beta firmware 2.00.11.
I think that this issue was caused from a bug that decrease upload bitrate of WRP400 after some days of activity.
See more details on Cisco forum under title "WRP400 stops responding after browsing certain websites".
Thanks. -
Mail with attachment; dynamic receiver
Hi everybody,
we are sending a mail with attachment though mail adapter.
In Micosoft Exchange the mail is received correct und the attachment is displayed.
We got also a signature server.
There the attachment is not regocnized.
Any ideas.
Is MS Exchange more error toleranting that onther mail servers?
Any ideas are appreciated
Regards MarioHi,
1) XML payload as attachment (with dynamic name)
2) recipient (recipient email id is part of input xml payload, but not part of the mapped XML payload)
These two is possible by using Mail Package. You have a standard xsd for mail package which you can download from the SAP Note 748024.
The xml created in you java mapping which will be your attachment should be put into the <content> tag of the mail package xml structure. and the file name can be set in the <Content_Type> tag.
<?xml version="1.0"; encoding="UTF-8"?>
<p2:Mail xmlns:p2="http://sap.com/xi/XI/Mail/30">
<Subject>My Invoice</Subject>
<From>from email address<;/From>
<To>to email address</To>
<Content_Type>text/plain;name="MyFile.csv";</Content_Type> --> file name here
<Content>123;A49;aaa</Content> -> attachment xml here
</p2:Mail>
And you have to select MailPackage in the receiver mail adapter.
Regards,
Aravind -
C3-01 can´t delete mails with attachment
Hi,
since one week I have the C3 touch & type. It`s a very nice mobile phone. But I have a problem: I can not delete mails with attachment in the mail programm. Mails without attachment are no problem. I have an mailaccount from "1und1" (Germany). Has anybody an idea, how I can solve this?
Thanks alot.
pastoresThe only way I've been able to delete them is to delete the email account from the phone, then add the account, again.
Pretty painful solution. -
HT4623 My messages are not being sent. Can someone help?
My messages are not being sent. Can someone help?
Alan, how you're doing?
You already know issue is not with the email account, since it's working on another devices.
Now you have to define whether it is a user specific or system wide issue.
Create another user account through system prefereces > users and groups. Try to set up account on the new test user.
If it works, get back to your main account, open mail application, go to menu > Window > open activity and connection doctor (Make sure you organize these tools in a way that allows you to see both mail windows and activity/ connection doctor... Now, try to send a test email and you will see where the issue is.
Then...
Go to mail preferences > select your email account > click the - button to remove it and + to readd account.
Fill your full name, email address and password. Now, hold down option key and press continue... Insert incoming and outgoing information.
Any doubts, feel free to ask. -
Mail Receiver: Attachment gets not generated
Hi,
AFAIK in SXMB_MONI in the MappingStep the attachment is shown, when it was created.
My mapping does not show the attachment.
Although my mapping is identical to former XIs where I implementes "Mail with attachment"
We are now on NW04S_16_REL. Does anybody had the same problems?
My field are filled as follows:
/ns0:Mail/Subject = "BlaBla"
/ns0:Mail/From = "xyz@xyz"
/ns0:Mail/To = "xyz@xyz"
/ns0:Mail/Content_Type = Constant: multipart/mixed; boundary="AaBb--984dfgeSSd3532"
/ns0:Mail/Content_Disposition = Constant: attachment
/ns0:Mail/Content =
<Content>--AaBb--984dfgeSSd3532
Content-Type: text/plain; charset="UTF-8"
some Text
--AaBb--984dfgeSSd3532
Content-Type: text/plain;charset="UTF-8";name=attachment.txt
--AaBb--984dfgeSSd3532
ThisSouldbeTheTextInTheAttachment</Content>
Why does the attachment not be generated?
Thanks, Regards
MarioNo,
but consider:
Befor the message enters the CC the attachment should already be seen in SXMB_MONI
Regards
Mario
Edited by: Mario Müller on Apr 20, 2009 4:05 AM
Maybe you are looking for
-
Headphone Jack No Longer Works
Does anyone know of headphones that may plug into the bottom outlet of the iPod, where it connects usually to stereo equipment. My iPod still works with this connection, to charge it, to listen on my computer, on my stereo but the headphone jack no l
-
Active Internet connections Proto Recv-Q Send-Q Local Address Foreign Address (state) tcp4 0 0 10.0.0.2.50921 a184-25-165-54.d.https CLOSE_WAIT tcp4 0 0 10.0.0.2.50920 a184-25-165-54.d.https
-
please give with an example if possible to use? Moderation: Thread Locked. Kindly do not post interview questions here
-
How to stop and (rewind) videos.
Hi. I am trying to create my first 100% to be the page of a Multi-Artistic Performance i have with some friends. All the content of the site is being displayed inside a Movie Clip (called "pageContainer_mc"). I have then 6 diferent pages, each with d
-
Videos corrupted in aperture,lion.
Had to move entire library from external firewire drive to my desktop to finally keep it from crashing. Now i can run aperture and my photos appear intact from what I can see but many of my videos are pixelated mess on the preview and none of them w