Mailto does not work in one particular profile. XP FF 3.6.8

mailto will work in other profiles, but not the primary one. what file in the relavant profiles subfolder can I substitue from another working profile?

Google has recognized this problem, discussion here:
http://www.google.com/support/forum/p/Google+Docs/thread?tid=4f0369bdcf6fd7ff&hl=en
Joni

Similar Messages

Flash player does not work under one user account.

Flash player does not work under one of my user accounts.
My system: I work with a mac mini with Mac OS X 10.6.8.
What I have done:
I installed the flash player maybe one year ago under my "first" user account. At that time this user account had had administrator authorization. In the meantime I had to change this "first" user account in an account without administrator authorization and created an administrator user with which I installed different programms. Lately, the message came up that it would be necessary to update the flash player. I did it; under the "first" user account, but of course with the administrator's password for installing. The installation had been "successful" - so I was told. But it did not run. I tried it again and again. Each time with "deinstallation" first. No way; it did not work.
After asking Adobe for the reason of the problem, they suggested to install the programm directly under the administrator user. I did that (of course after deinstalling under the "first" user account) with the result, that flash player runs under my administrator and my "second" user account, but not under the first user account. There I am always told to update my flash player.
With this result, I talked to Adobe. So they told me to contact the producer of the operating software, since this would be a mistake of the operating software.
And here I am - full of hope to get help from you.
Thanks for reading. And thanks in advance for helping me.
Nanny FS

Any update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts???

HT1409 I have done this but it does not work with one of my albums and I dont know why??

I have done this but it does not work with one of my albums and I dont know why??

That would be it. Sometimes you can tweak the album & artist names enough for iTunes to download matching art from the store, or you could add a bonus track featuring 1 second of silence and attach artwork to that, or you could convert the files to Apple Lossless.
tt2

Apple USB keyboard does not work with one internal usb port

Hi everyone,
hope someone can help me to solve my problem. I have a MPB13 retina late 2013 since something like 3 months. I have additional screen (dell), usb wired keyboard (apple) and BT magic mouse.
Since a few days, my usb keyboard does not work well. It only want to work properly when plugged to the rights side usb port internal port and not anymore on the left one. It also work on a usb external concentrator. Before, I had no problem, it worked perfectly. There was no problem such as cofee on it...
After searching the web on such problem, I tries a few things such as:
I tried the keyboard on another computer (windows): works fine
I tried usb stick and external DVD reading on the left internal usb ports: works fine
I switch the MPB off and turn it back on: the usb keyboard still does not work on the left usb port
I tried the SMC and PRAM reset : nothing
Any idea ??
Thanks
Guillaume

I'm facing the same problem, found any solutions ?

Search does not work in one of the site collections

The Search in one of the site collections in my extranet sites is not working. When I search it the does return any results, it's not finding anything. I went to search just the documents library it does not work as well. I didn't find any errors in the
log or event viewer. All other site collections the search work fine. There is no exclusion in the search rule. The site collection is set as searchable. The site has no crawlog log.
Any help?

No. I added pdf. The site collections is not being crawled it doesn't exist in any of these tables .msscrawlhistory
.msscrawlcontent
.msscrawlurl

IPad touch-screen sensor the does not work on one part of displey

I have problem with a part of the screen on my iPad. It seems like the sensor on the screen does not work. When draging items or webpages through that section, the dragging stops. It looks like the screen is not detecting my fingers on that part. Part of the screen that is not working is about 1 cm wide. iPad is 1 month old.
Message was edited by: micronola

Had the same issue with a 1cm strip from top to bottom (portrait) not responding. I did a backup, a complete factory reset, and then a restore of the backup. So far it seems to be working again!!

Bookmark bar does not work on one of my computers - w XP

Firefox 4.0 - the bookmark bar does not work. It appears but will not accept drags.
PC w Windows XP - 3.
Another thing too - The open new tab does not show up at all, in order to open a new tab I had to put the "open new tab" tab into the navigation toolbar.
(Works fine on my other computer, & it drives me nuts to have to use Firefox w 2 different setups...)

What's the URL of your site so we can examine it first hand? Have you tried republishing your site with the File ➙ Publish Entire Site menu option?
OT

Value help does not work for ONE person only !

Hi,
we have a strange problem. In the Web IC, we are using a standard value help for the country field for a Business Partner. This works fine for everyone (ie, it picks up the country and slots it into the field) except one person. For her, it never returns any value into the country field. We are guessing that it's not Web IC related but is something in her browser settings etc...but haven't been able to pin it down. Can anyone offer any advice on this ?
thanks for looking.
Malcolm.

Hello Malcolm,
If this error occurs for one user only it's definitely related to the clients PC.
Did you already delete all temporary files and the cookies on that PC? Usually this does the trick!
If this does not solve the problem, try to let that particular user login on another PC where the problem does not occur. (If the error does occur on another PC too it's probably profile/authorization related)
Hope this helps!
Regards,
Joost

Mailto: link not working from a particular website but works from others

the mailto: links on my website are not working in firefox v26.0 but other sites mailto links work perfectly well and open gmail has i would expect them to. i know the links on my site are working has i have tested them in chrome and work has expected so the issue is purely within firefox.
Can anyone give me any clues

hi
This is where things are upto:
Tried everything that has been suggested so far without success,
I therefore unistalled firefox and rebooted computer and reinstalled FF and retested the links from the top level frameset then clicking the Contact Us link in the left frame.
The mailto: links when clicked on now open a newly composed message by firstly initiating a new tab within chrome its self (mailto: set to use google chrome within Options-> Options->Applications). If I set this to be Use Gmail then the problem i was having returns.
Does anyone have any suggestions of why this is.

Apple id account does not work on one of my devices, works on all others

My sons ipad mini will not accept the apple id username and password. It was set up with my account and now will not work.

Hi,
On your laptop, in iCal are the calendars checked on the left hand side?
Best wishes
John M

Batch process does not work in one service, but worked in another.

Hi Fellows,
We have here a batch process with a code encrypted, that runs daily in a production environment.
Tonight this batch process did not work.
It is expected that this process runs in about 20 seconds, but tonight this process used about 3 hours and did not finished.
We checked if it was concurrency, killed some sessions and tried again, and nothing has changed.
And then someone changed the service that this process uses, it was 'bat' and changed to 'dba'. And it worked succesfully in 11 seconds.
Here is the tnsnames that the batch process uses:
bat =
(DESCRIPTION =
(LOAD_BALANCE = OFF)
(FAILOVER=ON)
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x2)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = bat)
(FAILOVER_MODE =
(BACKUP = dba)
(TYPE = NONE)
(METHOD = BASIC)
(RETRIES = 20)
(DELAY = 5)
dba =
(DESCRIPTION =
(LOAD_BALANCE = OFF)
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x2)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dba)
Do you guys know what could be the reason?
Thanks in advance.

We set the service which the app should connect.
These services are set in srvctl:
ora.cms.bat.cms1.srv ONLINE ONLINE on fastora1
ora.cms.bat.cms2.srv ONLINE ONLINE on fastora2
ora.cms.bat.cms3.srv ONLINE ONLINE on fastora3
ora.cms.bat.cs ONLINE ONLINE on fastora1
ora.cms.cms1.inst ONLINE ONLINE on fastora1
ora.cms.cms2.inst ONLINE ONLINE on fastora2
ora.cms.cms3.inst ONLINE ONLINE on fastora3
ora.cms.cmsuser.cms1.srv ONLINE ONLINE on fastora1
ora.cms.cmsuser.cms3.srv ONLINE ONLINE on fastora3
ora.cms.cmsuser.cs ONLINE ONLINE on fastora1
ora.cms.db ONLINE ONLINE on fastora1
ora.cms.dba.cms1.srv ONLINE ONLINE on fastora1
ora.cms.dba.cms2.srv ONLINE ONLINE on fastora2
ora.cms.dba.cms3.srv ONLINE ONLINE on fastora3
The batch process connects to a service [ bat ], but it hangs and don't finish. But when we change the service do dba is just pass in some seconds and finish succesfully.
Connected to DB [issr@bat ]
PAYware CMS Version 8.0 - Module : E352 Release : 000000002
Program: /cms/cmsissr/CMS/bin/issuer/mepcs352
Release: 2
PARAMETERS OK !!!
NUMBER OF PROC.: 000001
Number of transactions : +000047570
Number of parallel processes: 000001
Transactions by process: 000000000000047570
Transactions Processed: 000010000

Moving folder does not work in this particular case

Hi everybody,
I am currently sorting folders and I do it from Lightroom.
No problem until yesterday
- 4 levels of sub-folder
- I move the fourth level to another directory at the first level
- I see the progress bar "moving"
As a result, a new directory appears at the first level but it is empty according to Lightroom (it is not in windows file explorer : transfer has completed properly).
The original directory remains where it was in Lightroom and the files are in missing red state.
I have to click on the old directory and locate the files using the browser to make it work.
Not efficient at all
Any clue?
Thanks

Just one suggestion to be able to reconnect all at once:
Create a smart album containing the images with missing masters:
File -> New -> Smart Album, and add a rule: File Status is "Missing" (or File Status is "offline")
Then select the images in this album and go to the File menu:
and select: File -> Locate referenced File
If you are lucky, Aperture will reconnect all at once, if you point the first image version to its counterpart.

OWA does not authenticate for one particular user

Dear All,
Hope you are doing great...!
I am having Exchange 2010 Environment with NLB having two CAS servers bonded with it.
One of OWA cannot authenticate ONLY ONE USER.
It just says user name or password is incorrect.
Please suggest as early as possible.
Regards, Jay.

User account is not locked out, I even tried to reset the account password and tried unlocking the account too.
User is able to access through other CAS node in NLB.
User is not using any mobile device. He is using OWA in his desktop browser.
Please help!!
Regards, Jay.
This is weird . did you try using other system ? Also what changes you have done for this user recently ?
Amit Rawat | MCITP - Exchange 2007/2010| CCNA |MCSE- 2003| Lync 2010|http://blog.amitrawat.net

After deploy in server, integrated Security works for all users but only one user does not work for one user

hi
   i'd like to ask for help.here is a brief introduction.
      i publish a web project on a server(the name,"server-deploy"),(it connect with sql server datavvase with connection string of database "Trusted_Connection=Yes",with web config file <authentication
mode="Windows" />    <identity impersonate="true"/>
   there are some users whose Impersonae_clients_after_authentication are enabled. and most of them can connect to database via the deployed project .
but one user,he was told 'NT AUTHORITY\ANONYMOUS LOGON', and according to even viewer("security of "windows log") of "server-deploy",it shows "Audit failure"(the Task category is "credential validation")
and here is some information
[ Name] Microsoft-Windows-Security-Auditing
   EventID 4776
The computer attempted to validate the credentials for an account.
PackageName MICROSOFT_AUTHENTICATION_PACKAGE_V1_0
TargetUserName (user)
Workstation (Workstation)
Status 0xc0000064
   while when other user do login ,there is no log whose Task category is "credential validation".
COULD ANY ONE CAN DO ME A FAVOR TO HELP ME?ANY HELP IS APPRECIAT. THANK U VERY MUCH IN ADVANCE :)
best regards
martin

and i made a small windows form application here
   private bool impersonateValidUser(String userName, String domain, String password)
            WindowsIdentity tempWindowsIdentity;
            IntPtr token = IntPtr.Zero;
            IntPtr tokenDuplicate = IntPtr.Zero;
            if (RevertToSelf())
                if (LogonUserA(userName, domain, password, LOGON32_LOGON_INTERACTIVE,
                    LOGON32_PROVIDER_DEFAULT, ref token) != 0)
                    if (DuplicateToken(token, 2, ref tokenDuplicate) != 0)
                        tempWindowsIdentity = new WindowsIdentity(tokenDuplicate);
                        impersonationContext = tempWindowsIdentity.Impersonate();
                        if (impersonationContext != null)
                            CloseHandle(token);
                            CloseHandle(tokenDuplicate);
                            return true;
            if (token != IntPtr.Zero)
                CloseHandle(token);
            if (tokenDuplicate != IntPtr.Zero)
                CloseHandle(tokenDuplicate);
            return false;
and here is the code of buttonclick
if (impersonateValidUser(user,psw,doman))
                if (!System.IO.Directory.Exists(this.textBox1.Text))
                    MessageBox.Show("not exist with imper");
                else
                    MessageBox.Show("exist with imper");
                undoImpersonation();
            else
                MessageBox.Show("fail login.");
   and i was told "exist with imper"(usually if Impersonae_clients_after_authentication is not enaled would told "not exist with imper" )

The Find function does not work with one of my pdf files

I uninstalled whatever version of the reader that had been my computer at installed 11.0.06. Same problem. Seems like the Find function has a problem with just one of my many pdf files.
For the problem file, the PDF Producer was IIPDFLib2.x, version 1.5. Fast Web View: Yes.
Windows 8.1
Rebel1

I can not select any text, either individual letters or sequences of letters. If I left-click and drag while holding the left button down, I generate a rectangular selection. I can then Ctrl-C the selection and paste it in Word.
So it is a image, with a pdf filename ending rather than jpg or something similar. That probably also explains why the image quality is much worse than with genuine PDF files.
Thanks,
Rebel1

Mailto does not work in one particular profile. XP FF 3.6.8

Similar Messages

Maybe you are looking for