Mailto links in websites not working correctly in FF 36.0.1
I know this isn't a new problem as I've found lots about it in the Internet but I haven't found anything that will fix it! This problem only started for me when I updated to Firefox36, until then everything was working perfectly, but as I've seen references to the problem going back to 2007 that may be a red herring.
I'm using Windows 7 Professional, 64 bit on an HP ProBook. When I click on a mailto link in a web page I have a Windows Internet Explorer window open saying "Could not perform this operation because the default mail client is not properly installed".
I was clicking the link in Firefox, Firefox is my default browser, The Bat is set as my default program for handling mailto commands and everything was in 100% working order until I updated to v36.
On another computer also running Windows 7 Professional, 64 bit with Firefox 36.0.1 this problem does not occur! Clicking on a mailto in that works just as it should. I've tried uninstalling and reinstalling Firefox, but it made no difference - the problem wouldn't go away.
It's driving me barmy! ;-)
Hello again,
Yes, all the default settings are correct, that was my first port of call.
However, it would seem it's not just a Firefox problem. The same thing happens in Internet Explorer, Safari just puts up an error message saying it can't open the specified address because Windows doesn't recognise Internet addresses starting with mailto:
...... BUT ...... if I load Opera or Chrome the mailto links work 100% correctly!
Similar Messages
-
Link functions are not working correctly
I am have a number of links on my page and I am using the a;link, a:hover and a:visited commands but I am getting strange results. First of all my css is on a separate style sheet. What I am trying to do is have all my links in gray text both when before and after being visited and I want the text to change to red and underline when I hover over the link. My results are that in live view the links all seem to work ok except for my HOME link at the bottom of the page where it does not change color and does not underline. When I view in browser the results are worse. None of the links change when I hover over them excepts for the DOWNLOAD link. Also note that I have 4 columns of unordered lists about the footer which also does not work either. Here is the source and css code. Thanks for your help.
Dan
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="description" content="HOME PAGE for company which provides chemical process equipment, diaphragm pumps, plastic tanks, pH/ORP controls, mixers, filtration equipment, flowmeters"
<title>Chemtech Process Equipment</title>
<style type="text/css">
</style>
<link href="CSS/Chemtech.css" rel="stylesheet" type="text/css" />
<link rel="stylesheet" href="CSS/verticalmenu.css" type="text/css" />
<link rel="stylesheet" href="CSS/horizontalmenu.css" type="text/css" />
</head>
<body>
<div id="container">
<div id="header"><img src="Images/header.jpg" alt="header" width="960" height="310" border="0" usemap="#logomap" />
<map name="logomap" id="logomap">
<area shape="rect" coords="3,5,265,123" href="index.html" alt="Chemtech Process Equipment" />
</map>
</div>
<div id="navigation_bar"><div class="AJXMenuULDYZCC"><!-- AJXFILE:CSS/horizontalmenu.css -->
<div class="ajxmw1">
<div class="ajxmw2">
<ul>
<li><a href="index.html" title="Home"><b> HOME </b></a></li>
<li><a class="ajxsub" href="productsbytype.html" title="Products"><b> PRODUCTS </b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="productsbytype.html" title="Indexed by Type"><b>Indexed by Type</b></a></li>
<li><a href="productsbymfgr.html" title="Indexed by Manufacturer"><b>Indexed by Manufacturer</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a href="#" title="Request Quote"><b>REQUEST QUOTE</b></a></li>
<li><a href="#"><b>DOWNLOADS</b></a></li>
<li><a href="contact%20us.html" title="Contact Us"><b> CONTACT US </b></a></li>
</ul>
</div>
</div>
<br />
</div></div>
<div id="sidebar"><div class="AJXMenuEHWBGHC"><!-- AJXFILE:CSS/verticalmenu.css -->
<ul>
<li><h1><b>PROCESS EQUIPMENT</b></h1></li>
<li><a class="ajxsub" href="#" title="Pumps"><b>Pumps</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Air Diaphragm"><b>Air Diaphragm</b></a></li>
<li><a href="#" title="Centrifugal"><b>Centrifugal</b></a></li>
<li><a href="#" title="Drum"><b>Drum</b></a></li>
<li><a href="#" title="Gear"><b>Gear</b></a></li>
<li><a href="#" title="Hose"><b>Hose</b></a></li>
<li><a href="#" title="Magnetic Drive"><b>Magnetic Drive</b></a></li>
<li><a href="#" title="Metering"><b>Metering</b></a></li>
<li><a href="#" title="Peristaltic"><b>Peristaltic</b></a></li>
<li><a href="#" title="Piston"><b>Piston</b></a></li>
<li><a href="#" title="Vertical"><b>Vertical</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Mixers"><b>Mixers</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Direct Drive"><b>Direct Drive</b></a></li>
<li><a href="#" title="Gear Drive"><b>Gear Drive</b></a></li>
<li><a href="#" title="C-Clamp Mount"><b>C-Clamp Mount</b></a></li>
<li><a href="#" title="Drum Mount"><b>Drum Mount</b></a></li>
<li><a href="#" title="Fixed Top Mount"><b>Fixed Top Mount</b></a></li>
<li><a href="#" title="Side Mount"><b>Side Mount</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Filters"><b>Filters</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Bag"><b>Bag</b></a></li>
<li><a href="#" title="Cartridge"><b>Cartridge</b></a></li>
<li><a href="#" title="Centrifuge"><b>Centrifuge</b></a></li>
<li><a class="ajxsub" href="#" title="Indexing Media"><b>Indexing Media</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Gravity FIlter"><b>Gravity Filter</b></a></li>
<li><a href="#" title="Vacuum FIlter"><b>Vacuum FIlter</b></a></li>
<li><a href="#" title="Sludge Filter"><b>Sludge FIlter</b></a></li>
<li><a href="#" title="Pressure Filter"><b>Pressure Filter</b></a></li>
<li><a href="#" title="Sludge Filter"><b>Sludge Filter</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a href="#" title="Oil Skimmers"><b>Oil Skimmers</b></a></li>
<li><a href="#" title="Oil-Water Separators"><b>Oil-Water Separators</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Tanks"><b>Tanks</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Carboys & Totes"><b>Carboys & Totes</b></a></li>
<li><a href="#" title="Rectangular"><b>Rectangular </b></a></li>
<li><a href="#" title="Cylindrical Cone Bottom"><b>Cylindrical Cone Bottom</b></a></li>
<li><a href="#" title="Cylindrical Flat Bottom"><b>Cylindrical Flat Bottom</b></a></li>
<li><a href="#" title="Vertical Bulk Storage"><b>Vertical Bulk Storage</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Piping/Hose"><b>Piping / Hose</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="PVC Pipe & Fittings"><b>PVC Pipe & Fittings</b></a></li>
<li><a href="#" title="CPVC Pipe & Fittings"><b>CPVC Pipe & Fittings</b></a></li>
<li><a href="#" title="Polypro Pipe & Fittings"><b>Polypro Pipe & Fittings</b></a></li>
<li><a href="#" title="PE Pipe & Fittings"><b>PE Pipe & Fittings</b></a></li>
<li><a href="#" title="Kynar Pipe & Fittings"><b>Kynar Pipe & Fittings</b></a></li>
<li><a href="#" title="Sanitary Hose, Gaskets & Fittings"><b>Sanitary Hose, Gaskets & Fittings</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Immersion Heaters"><b>Immersion Heaters</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Electric Immersion"><b>Electric Immersion</b></a></li>
<li><a href="#" title="Steam Coil"><b>Steam Coil</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Process Controls"><b>Process Controls</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="pH & ORP Probes"><b>pH & ORP Probes</b></a></li>
<li><a href="#" title="Conductivity Probes"><b>Conductivity Probes</b></a></li>
<li><a href="#" title="Flowmeters"><b>Flowmeters</b></a></li>
<li><a href="#" title="Level Sensors"><b>Level Sensors</b></a></li>
<li><a href="#" title="Pressure Transducers"><b>Pressure Transducers</b></a></li>
<li><a href="#" title="Process Controllers"><b>Process Controllers</b></a></li>
<li><a href="#" title="VFD's"><b>VFD's</b></a></li>
<li><a href="#" title="Power Monitors"><b>Power Monitors</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><h1><b>ENGINEERED SYSTEMS</b></h1></li>
<li><a href="#" title="Chemical Feed Skids"><b>Chemical Feed Skids</b></a></li>
<li><a class="ajxsub" href="#" title="Evaporators"><b>Evaporators</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Burt Process Equipment"><b>Burt Process Equipment</b></a></li>
<li><a href="#" title="Filtertech"><b>Filtertech</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a href="#" title="Filtration Systems"><b>Filtration Systems</b></a></li>
<li><a href="#" title="Fume Scrubbers"><b>Fume Scrubbers</b></a></li>
<li><a href="#" title="pH Neutralization"><b>pH Neutralization</b></a></li>
<li><a href="#" title="RODI Water Systems"><b>RODI Water Systerms</b></a></li>
<li><a href="#" title="Transfer Sumps"><b>Transfer Sumps</b></a></li>
<li><a href="#" title="UL Control Panels"><b>UL Control Panels</b></a></li>
<li><a href="#" title="Vacuum Distillation"><b>Vacuum Distillation</b></a></li>
<li><a class="ajxsub" href="#" title="Wastewater Treatment"><b>Wastewater Treatment</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Burt Process Equipment"><b>Burt Process Equipment</b></a></li>
<li><a href="#" title="Filtertech"><b>Filtertech</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a href="#" title="Water Reclaim (LEEDS)"><b>Water Reclaim (LEEDS)</b></a></li>
</ul>
<br />
</div>
</div>
<h1>Engineered Solutions to your fluid handing requirements.<img src="Images/aro-pump-ad.jpg" alt="aro pump ad" width="200" height="200" hspace="10" vspace="15" align="right" /></h1>
<p>Chemtech Process Equipment (CPE) provides fluid handling equipment to a wide range of industries which include pharmaceutical, biotechnology, microelectronics, metal finishing, chemical processing and general manufacturing.</p>
<p>CPE offers turnkey engineered products such as transfer sumps, wastewater treatment, coolant filration, oil-water separation, water reclamation (LEEDS), pH neutralization, deionized water (RODI), and custom fabricated tanks and vessels.</p>
<p>CPE’s product line includes pumps, tanks, mixers, filters, evaporators, magnetic separators, centrifuges, oil skimmers, flowmeters, level, pH, ORP, and conductivity measurement, heaters, plastic pipe, valves and fittings, sanitary hose, and gaskets to name a few. Feel free to review our product line and contact us if you have any questions or applications to discuss.</p>
<h2>Products<br /></h2>
<hr align="left" width="740" />
<br />
<div class="floatlist">
<ul>
<li><a href="">Air Diaphragm Pumps</a></li>
<li><a href="">Cenrifugal Pumps</a></li>
<li><a href="">Drum Pumps</a></li>
<li><a href="">Gear Pumps</a></li>
<li><a href="">Hose Pumps</a></li>
<li><a href="">Magnetic Drive Pumps</a></li>
<li><a href="">Metering Pumps</a></li>
<li><a href="">Multi-Stage Centrifugal Pumps</a></li>
<li><a href="">Peristaltic Pumps</a></li>
<li><a href="">Piston Pumps</a></li>
<li><a href="">Submersible Pumps</a></li>
<li><a href="">Vertical Immersion Pumps</a></li>
</ul>
</div>
<div class="floatlist">
<ul>
<li><a href="">Custom Engineered Tanks</a></li>
<li><a href="">Molded Plastic Tanks</a></li>
<li><a href="">Direct Drive Mixers</a></li>
<li><a href="">Gear Drive Mixers</a></li>
<li><a href="">Portable Mixers</a></li>
<li><a href="">Side Mount Mixers</a></li>
<li><a href="">Conductivity Probes</a></li>
<li><a href="">Flowmeters</a></li>
<li><a href="">Level Sensors</a></li>
<li><a href="">pH & ORP Probes</a></li>
<li><a href="">Power Monitors</a></li>
<li><a href="">Pressure Transducers</a></li>
</ul>
</div>
<div class="floatlist">
<ul>
<li><a href="">Process Controllers</a></li>
<li><a href="">Ultrasonic Level Transmitters</a></li>
<li><a href="">Variable Frequency Drives</a></li>
<li><a href="">Sanitary Hose, Gaskets & Fittings</a></li>
<li><a href="">PVC Pipe, Valves & Fittings</a></li>
<li><a href="">CPVC Pipe, Valves & Fittings</a></li>
<li><a href="">Polypro Pipe, Valves & Fittings</a></li>
<li><a href="">Polyethylene High Purity Piping</a></li>
<li><a href="">Immersion Heaters</a></li>
<li><a href="">Magnetic Separators</a></li>
<li><a href="">Centrifuges</a></li>
<li><a href="">Evaporators</a></li>
</ul>
</div>
<div class="floatlist">
<ul>
<li><a href="">Bag Filters</a></li>
<li><a href="">Cartridge Filters</a></li>
<li><a href="">Indexing Media Filters</a></li>
<li><a href="">Gravity Filters</a></li>
<li><a href="">Pressure Filters</a></li>
<li><a href="">Sludge Filters</a></li>
<li><a href="">Vacuum Filters</a></li>
<li><a href="">Filter Bags</a></li>
<li><a href="">Filters Cartridges</a></li>
<li><a href="">Filter Media</a></li>
<li><a href="">Pulsation Dampeners</a></li>
<li><a href="">Fiberglass Grating</a></li>
</ul>
</div>
<div id="footer">
<ul>
<li><a href="index.html">HOME</a></li>
<li><a href="productsbytype.html">PRODUCTS</a></li>
<li><a href="requestquote.html">REQUEST QUOTE</a></li>
<li><a href="downloads.html">DOWNLOADS</a></li>
<li><a href="contact us.html">CONTACT US</a></li>
</ul>
<hr align="center" width="940" id="footer rule2" />
<h4>© 2011 Chemtech Process Equipment, All Rights Reserved, Designed and Developed By Graphics Advantage. <img src="Images/GA-logo.jpg" width="46" height="40" align="top" /><br /><br /></h4>
</div>
</div>
</body>
</html>
@charset "utf-8";
body {
background-image: url(../Images/logo-background.jpg);
background-repeat: repeat;
background-attachment: fixed;
#container {
font-family: Arial, Helvetica, sans-serif;
font-size: 14px;
color: #000;
background-color: #FFF;
width: 960px;
margin-right: auto;
margin-left: auto;
overflow: hidden;
background-attachment: fixed;
#container p {
padding-right: 20px;
#header {
width: 960px;
height: 310px;
#headernarrow {
height: 150px;
width: 960px;
#navigation_bar {
height: 31px;
width: 960px;
#sidebar {
float: left;
width: auto;
margin-right: 20px;
#footer {
text-align: center;
width: 960px;
float: left;
#footer ul li {
display: inline;
#footer ul li a {
padding-right: 10px;
padding-left: 10px;
a:link {
color:#666;
text-decoration:none;
a:hover {
color:#F00;
text-decoration:underline;
a:visited {
color:#666;
text-decoration:none;
.floatlist {
font-family: Arial, Helvetica, sans-serif;
font-size: 10px;
color: #F00;
float: left;
height: auto;
width: 190px;
.floatproductlist {
font-family: Arial, Helvetica, sans-serif;
float: left;
height: auto;
font-size: 14px;
font-style: normal;
color: #000;
width: 380px;
h4 {
font-size: 10px;
font-family: Arial, Helvetica, sans-serif;
h1 {
font-family: Arial, Helvetica, sans-serif;
font-size: 24px;
font-weight: bold;
color: #F00;
ul {
list-style-type: none;
padding: 0px;
margin-top: 0px;
margin-right: 0px;
margin-bottom: 0px;
margin-left: 1em;
display: block;
.largeheading {
font-family: Arial, Helvetica, sans-serif;
font-size: 48px;
color: #F00;
.floatimageleft {
float: left;
width: 250px;
margin-right: 20px;
height: auto;
margin-top: 10px;
background-image: url(../Images/aro-compact-series-float.jpg);
background-repeat: no-repeat;
margin-bottom: 20px;When you use the link pseudclass in your css it has to be expressed in the correct order.
LoVe HAte
Link
Visited
Hover
Active
It doesn't matter that you have not expressed all four but the three that you have still need to be that way.
Anyway, try it, we have nothing to lose!
Martin -
Linked Button - lf_profitCenter, Not Working correctly
Hello Experts
Can anyone explain why the following code, doesn't work?
SAPbouiCOM.Item itemLbtnCC;
SAPbouiCOM.LinkedButton LbtnCC;
itemLbtnCC = this.Form.Items.Add("lnCC", SAPbouiCOM.BoFormItemTypes.it_LINKED_BUTTON);
LbtnCC = (SAPbouiCOM.LinkedButton)(itemLbtnCC.Specific);
itemLbtnCC.Top = this.Form.Items.Item("5").Top;
itemLbtnCC.Left = this.Form.Items.Item("5").Left - 16;
itemLbtnCC.LinkTo = this.Form.Items.Item("5").UniqueID;
LbtnCC.LinkedObjectType = "61";
And when the form is loaded returns the following exception:
Invalid target [66000-24]
The problem (the code stops) ,occurs on the linked object 61, however in SDK Help Center , linked object 61 is mapped to lf_ProfitCenter which is the desired object of the custom linked button (Profit Center object).
Can you please give me an explanation? Is there any work around?
Kind Regards,
GeorgeI found this note:
1426939 - Can not link to ProfitCenter via LinkedButton
that offers a workaround for this issue:
Get error 'Invalid target [66000-24]' when using LinkedButton Object
to link the ProfitCenter as following code:
Private oLink As SAPbouiCOM.LinkedButton
Set oNewItem = oOrderForm.Items.Add("oTest", it_LINKED_BUTTON)
Set oLink = oNewItem.Specific
oLink.LinkedObject = lf_ProfitCenter
The workaround would be as follows:
- Read the profit centre you want to open into a string variable
- You can trigger opening the profit centre window by calling the method: oApplicaition.ActivateMenuItem (1793) 'menu id for ProfitCenter in Financials -> Cost Accounting -> Profit Centres
- Change form to Find mode, Put value from string variable into Profit Centre field and simulate click on Find button
This issue is an candidate to be fixed in a future version of SAP
Business One. -
External Links on website not working
I am currently using Firefox 3.6.3. The problem is when users access my website and try clicking on external links. Often the browser will stall or act as though nothing was clicked. I have noticed that the performance of the browser varies day to day. The issue has been tested on IE with none of the issues that occurred on Firefox. On the bright side Internal links are working perfectly.
== URL of affected sites ==
http://www.yumyucky.comI'm sorry, but you are able to fix it without messing up the layout. You just need to have a better understanding of CSS and HTML. My eleven-year-old gets similarly frustrated when she can't figure out how to write a paragraph in her Language Arts class in school because what the teacher wants doesn't come naturally to her yet. But she's in school to learn and you are here to learn as well.
Dump the apDiv 1 through 9.
Remember that a div can contain another div.
You can position divs by using margin-left, margin-top, margin-right and so on.
Divs are rectangular spaces (that may expand with content) that hold stuff.
One way to plan these things is to do it on a piece of paper and place divs inside of divs until you have a layout. Come up with a name for each div and make your CSS do what you're trying to do.
If you are using floats, style them. Include margins and so on in classes like this (for a picture in your website):
.floatLeft {
float: left;
margin-right: 8px;
.floatRight {
float: right;
margin-left: 8px;
Additionally, if you are using floats in a div, you may need to clear the floats below them, to go from, say, a two-column look to a one-column look:
.clearfloat { /* this class should be placed on a div or break element and should be the final element before the close of a container that should fully contain a float */
clear:both;
height:0;
font-size: 1px;
line-height: 0px;
The HTML for a float thusly styled would be:
<img src="path/image.jpg" alt="description of the picture" class="floatLeft" />
If you make a div class="floatLeft", you may need to clear the float, whereupon you do this in HTML:
<br class="clearfloat" />
That line break will take up no room and will clear you back to a one-column situation. -
Epress website not working correctly in Internet E...
I have been reading newspapers at www.epress.fi for some time without a problem on my lumia 1020.
After I installed the Lumia Cyan update reading is not possible anymore.
I usually read: Vasabladet and Hufvudstadsbladet.
After the update it does open the newspapers first page but after that is extremely slow to zoom or change page. It can take upp to 15 seconds between screen refresches. One can simply read there anymore with the phone.
Since there were no problems before the update I can only guess that some update to Internet Explorer har rendered it incompatible with that website.you perform a soft reset by pressing and holding the volume down and power keys until the phone turns off and vibrates. the date and time will be reset too once the phone powers up again.
you can either wait for the WP8.1 Update to come in a few months, or you can grab it now by enrolling in the Preview for Developers program. there were extensive changes to the web browsing experience in the Update i have referred to above so that may help you out. -
Internal Links in HTML Document Not Working Correctly in PDF
I have an HTML document that contains internal links (basically a Table of Contents). When the document is displayed in a browser, the internal links work correctly. However, when I use Acrobat 8 Professional to create a PDF version from the HTML source, the links don't go to the correct place when clicked. It almost appears that they are off by one, e.g., link 7 goes to anchor 8. I can send the source document for you to look at if you email me at eharris -at- synnovation.com. I am not expert in HTML and perhaps the links/anchors are not done correctly when I create the HTML document. Does anyone have any ideas on this?
This one has the same problem. For instance, "Anchor1" as <a name="Anchor1"> appears 13 times. I am sure that your problem is that Acrobat is going to the last occurance that is just before the first one. As I scan through the file I find similar results for all of the anchors. When I used Tidy, it reduces about 1350 errors to about 474, but that is still not too good. The validator is flagging a lot of identical IDs as well as unrecognized attributes (like ONSELECTSTART). The attributes correctly accepted by body are
Attribute Specifications
* BACKGROUND=URI (background image for document)
* BGCOLOR=Color (background color for document)
* TEXT=Color (text color for document)
* LINK=Color (link color for document)
* VLINK=Color (visited link color for document)
* ALINK=Color (active link color for document)
* ONLOAD=Script (document has been loaded)
* ONUNLOAD=Script (document has been exited)
as listed on htmlhelp.com for HTML 4. There may be some new ones in HTML 5, but I did not check.
I am not looking at all of your HTML in detail, but there appears to be a lot of unneeded things based on the error messages from the validator. Many browsers will let you display the stuff (even Acrobat), but there may be errors that crop in when you do not expect it or on some other browsers that the one you check. Thus again, you should use a validator. If you are only off a few tags that might be fine, but when it is in the 1000s, there is an issue. It would also be good to break your page up into parts. It is good practice on web pages for each page to be not much more than one screen. That is often exceeded, but 59 screens of info (on my screen) is a bit much. The TOC is definitely needed in that case, but just was well go to a sub page just as well and make the info easier to track. A PDF (as you are trying to get) could be made of the entire system for those that want it all in one bit. Bill -
Parental Controls are not working correctly. There are websites I've listed under Allow Access, however they are still blocked. - such as: Yahoo mail and USAA banking. How can I fix this?
Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly -
Email pushing not working correctly for office email - 3 seperate devices/carriers
We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
User 4 is on the older nextel blackberry push to talk, and is not on outlook.
We do not have an exchange server. Our emails were all set up through our devices.
Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
Thank you in advance for any suggestions.
Caitlin TalbotPotential solution for windows for a side-by-side install. This works for me.
To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
+ Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox 4\firefox.exe
+ Open profile manager. Start > Run : firefox.exe -ProfileManager
+ In profile manager create Two Profiles.
firefox3.6
firefox4
+ In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
+ Create two windows shortcuts.
* General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
* General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
That's it. Links from external programs should now open in your default browser.
Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile] -
LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly
Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
Anybody know of a way round this?Hi @dnhowes ,
I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Was it the Nvram reset back to factory settings that you tried or a hard reset?
Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
I find that on the Lab printers when I am selecting different menus.
If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Smart feed not working correctly
hello,
the smart feed are not working correctly in this course page :
https://deimos.apple.com/WebObjects/Core.woa/BrowsePrivately/upmc.fr.2857894925. 02857894930
Modified=01ca6e794f33e660
I don't understand why...C, sorry…I read your posts out of order. I see that you have links to your smart groups after all. My apologies.
It's as you say, the course pages load up, but I don't see anything in the smart groups. Just thinking out loud here…maybe the search criteria don't genuinely match anything on your site? Perhaps there are actual matches, but you've hidden content with a new credential?…I accessed both pages using the "Unauthenticated" and "All" credentials. My last/craziest guess is that it has something to do with localization…français versus anglais? -
Flash streaming from non-native websites not working on 10.1
Note: I am running:
Windows 7 64 bit
Internet explorer 8 32 bit, Firefox 3.6.3 (32 bit)
Flash player version: 10.1.53.64
Graphics card: Nvidia GeForce GTS 240
Graphics card driver: 257.21
Hi, Adobe Flash 10.0 was working perfectly until I upgraded it to 10.1. When I upgraded it to 10.1 by uninstalling the old version and installing the new version, the streaming function partially stopped working. I also upgraded Firefox separately, and the streaming function is working perfectly. However, my streaming Pandora Gadget on my desktop is NOT working correctly, it shows only a teeny box with a couple of shapes & colors in it, no error message whatsoever. The same is true for when I try and use embedded Youtube videos (such as on the Yahoo! website) on Internet Explorer 32 bit, but the videos on youtube directly are working perfectly. When I go to the Flash Install screen, it says it installed itself correctly, and shows the animation. I tried disabling the Hardware Acceleration, but it still didn't work on the non-native websites & the Pandora Gadget. When use an administrator account, both Internet Explorer & the Pandora Gadget work, anything I could do to make flash run in a user account besides changing them to administrator?There are a number of posts in this forum regarding Flash Player 10.1 and non-Admin accounts not working correctly. So far there seems to be no solution apart from reverting back to 10.0
-
Delete Statement is not working correctly
Hello,
The following delete statement is not working correctly.
If I press delete it will delete everything in the category table
I don't know whats wrong with it.
----delete row from category if there is not infrastructure to support------
IF :P12_DFCY_SEQNO4 IS NOT NULL AND :P12_DFCY_CATG_C = '7' THEN
DELETE FROM DFCY_CATG
WHERE NOT EXISTS(SELECT I.DFCY_SEQNO
FROM DFCY_CATG C, DFCY_CATG_INFRSTRCTR I
WHERE C.DFCY_SEQNO = I.DFCY_SEQNO
AND :P12_DFCY_SEQNO4 = I.DFCY_SEQNO);
end if;
Thanks
MaryHi,
IF :P12_DFCY_SEQNO4 IS NOT NULL AND :P12_DFCY_CATG_C = '7' THEN
DELETE FROM DFCY_CATG
WHERE NOT EXISTS(SELECT I.DFCY_SEQNO
FROM DFCY_CATG C, DFCY_CATG_INFRSTRCTR I
WHERE C.DFCY_SEQNO = I.DFCY_SEQNO
AND :P12_DFCY_SEQNO4 = I.DFCY_SEQNO);
end if;So, if P12_DFCY_SEQNO4 does not exist, then I would expect all records to be deleted because the NOT EXISTS() function would just return TRUE for every record on the table. Somewhere in the statement, I would expect to see something that links between the table being deleted from and the NOT EXISTS() data or, perhaps, using the P12_DFCY_CATG_C value as a filter?
Andy -
Is prompted filter not working correctly with calculated items
Hello,
I am working on OBIEE 11.1.1.3 and having problem problem linking 2 analisys with action link
The test case is:
I have 2 attribute columns on a dimension
1. Conto 1 Code
2. Conto 1 Dsc (in RPD i set up the property Descritor ID of -> Conto 1 Code)
3. Conto 2 Code
4. Conto 2 Dsc (in RPD i set up the property Descritor ID of -> Conto 2 Code)
5. Conto Detail
and 1 measure on the fact table
1. Revenue (defined on RPD as simple sum)
On presentation layer i have the analisys:
1.
The First one using as Criteria: Conto 1 Dsc | Conto 2 Dsc | Revenue
The layout is a table with sub-total on Conto 1 Dsc
On Revenue i created an action link to the second analisys containing
2.
Criteria: Conto 1 Dsc | Conto 2 Dsc | Conto Detail | Revenue
Filters: Conto 1 Code (is prompted) | Conto 2 Code (is prompted)
This pair of analisys are working fine.
Then i created a second pair of analisys as:
1.
Criteria: Conto 2 Dsc | Revenue
Using Calculated group \ Items i created a numerous set of sub-totals
On Revenue i created an action link to the second analisys containing
2.
Criteria: Conto 2 Dsc | Conto Detail | Revenue
Filters: Conto 2 Code (is prompted)
This pair of analisys are not working correctly. When i drill from first analisys to second one the Conto 2 Code filter is not used.
Replacing in the second analisys Conto 2 Code (is prompted) with Conto 2 Dsc (is prompted) a filter is being generated on the drill but it's using the Conto 2 Code value and the analisys ends with no results.
Thanks,
JonniTry adding Conto 2 code to the first analysis and keep the filter on the second analysis as Conto 2 code is prompted.
-Amith. -
Internet Explorer 11 "Enterprise Mode" do not work or do not work correctly!
Dear community,
Since yesterday we test the Feature "Enterprise Mode" for "Internet Explorer 11". However, we have many problems
with this Feature. We have configured it as described by officially instruction by MS, but it does not work
properly. Here is what we have done exactly to test this Feature:
In Registry Key " HKEY_LOCAL_MACHINE \ Software \ Policies \ Microsoft \ Internet Explorer \ Main \ Enterprise Mode " we have created the Entry " Site List " and create the string " Enable" . In the
String "Enable" we have added no value .
In Case of String "Site List" , we have specified the path to the XML file , as value of this String.
The XML file was created with the Site List Manager from Microsoft
And now, we regocnized following Problems:
The "Enterprise Mode" ist only "active", if the User(!) check "Enterprise Mode" under "Tools"...!
The site list is seemingly ignored, although in the Registry "currentversion" is pulled correctly, everytime we change
the XML File. So we think "SiteList" is configured well.
On one of our test computer freezes Internet Explorer 11 , if you try to hook the corporate mode
In Summary, it seems to be configured properly but it even do not work or not work correctly.
Our goal would be:
Enterprise Mode + access to the Site List by IE11 should be "on" by Default!
Entrys of sitelist.XML should be filtered and shown in "Enterprise Mode" or/and the right "DocMode", as configured.
The user should have no chance to check on or off the"enterprise mode"
We use "Windows 7" on all our Clients, as test Clients are also running the same operating System...
Please reply
Thank you very much
Greetings!
Ps: Please do not be angry if pronunciation or grammar do not fit well. English is not my nature language (my nature language is german)Hi，
According to your description, seems the end-users can manually turn on\off the enterprise mode, If you don''t want this, you can disable the option.
Computer(User) Configuration > Administrative Templates > Windows Components > Internet Explorer\Let users turn on and use Enterprise Mode from the Tools menu option
Disable this option, user will not have "Enterprise Mode" under "Tools", after that, please run gpupdate /force to update the policy, and get "Use the Enterprise Mode IE website list" applied again in the target system.
After that, the enterprise mode website list get applied again, and user don't have an option to disable it.
Yolanda Zhu
TechNet Community Support -
Spry tab not working correctly after custom changes
Hi,
i have used Spry Widget for making tabs in Dreamweaver for one of my project. i have customize these tabs. every thing was working fine until i add the horizontal scrolling to tab by jquery. tabs are not working correctly they do not show the tab content. i am sure there is some linking issue. all this problem begin when i added a addition div within the spry div tags if i remove <div style="overflow: hidden;" class="sc_menu" > every thing start working fine but this div control the scrolling and its important to put there. please can any one guide me what i am doing wrong i have uploaded the project to my server. below is the zip file link to download.
http://khurram.visbl.com/test.zip
please let me know if someone having problem in downloading above zip file. also waiting to find a solution for above. hope anyone is here who knows the solution
Best - KhurramSorry to disappoint, the structure of the tabbed panels is
<div id="TabbedPanels1" class="TabbedPanels">
<ul class="TabbedPanelsTabGroup">
<li class="TabbedPanelsTab" tabindex="0">Tab 1</li>
<li class="TabbedPanelsTab" tabindex="0">Tab 2</li>
</ul>
<div class="TabbedPanelsContentGroup">
<div class="TabbedPanelsContent">Content 1</div>
<div class="TabbedPanelsContent">Content 2</div>
</div>
</div>
As soon as you change that structure, this widget (out-of-the-box) will not work.
Gramps
Maybe you are looking for
-
PO print-preview for a PO with all deleted line items
Hello MM Gurus, I am not able to print preview of a PO for which i deleted all the line items. It gives me a message saying that no print relevant changes. Client need to print such POs. Client expects a text like "item cancelled " for deleted PO ite
-
Ipod won't sync despite restore
Hi all. I have an ipod classic that was purchased approx 3-4 years ago? I've had some recent problems (i.e. won't recognize the ipod, some songs only play 1-2 sec before moving along to the next). This most recent time, the ipod again was not reco
-
2tb internal drive macbook pro?
I have a macbook pro 13 inch from spring 2010 Will this be able to handle a 2tb internal hard drive? it is 3.5" also can i put in 16gb of ram? And is it possible to buy an extended battery like 12 cell or something, so my mac has double the life? Tha
-
SPRUNCALCACCOUNT to copy PL results to BS problem with time dimension
Hi there, I'm trying to copy PL result to BS account using account transformation with a simple configuration without informing source period. I'm running the datapackage informing the time dimension. it works fine for 2008.JAN but if we try with 200
-
Strategic Direction-Roadmapping
I have a global manufacturing client whose end users have limited SAP knowledge. They are currently running R/3 4.7 and BW 7.0. They have multiple language requirements; are not maximizing BW reporting; would like better financial reporting capabili