Mailx is not working on redhat 5

Hi All,
I am working with Redhat 5 servers.my mailx is not working in the server.Please help me to solve this issue.
I have schedule some scripts in crontab for monitoring .

Kindly confirm this is an Oracle forum and not an Unix or a Linux forum.
Please repost your off-topic question somewhere else.
Thank you!
Sybrand Bakker
Senior Oracle DBA

Similar Messages

Nigpib-linux PCI-GPIB driver does not work on RedHat 8.0

The PCI-GPBI driver for linux (nigpib-linux) can't be installed on Linux RedHat 8.0. The first error is a reference to "malloc.h" having to be replaced by "slab.h". Then, the module compiles, but it has to be loaded with the "force" option, by replacing all instances of "insmod" in the "INSTALL" script by "insmod -f". When loading there is an error message that the kernel is compiled with gcc 3.2, but the module with gcc 2.9, and this is known "not to work". One can load the kernel module with "insmod -f", but when running "ibconf", "insmod" is used when saving the configuration, so there is an error message again. The solution to this problem is probably to compile the source code for the driver (supplied by NI a
s a binary) with gcc 3.2. It would be so much easier if NI opensourced the entire driver.
Can NI compile a binary against gcc 3.2 on RedHat 8.0??
Thanks in advance.
Best regards, Erwin

Ok, my bad. Apparently the gcc3 compilied driver has
been available since Jan 2003. Here is a link:
ftp://ftp.ni.com/support/gpib/linux/nigpib-linux-0.8.3.tar.gz
I should think NI could use a better naming convention to
flag this a bit better. (Like nigpib-linux-gcc3-x.x.x)

CTSS is not working properly in RAC 11.2.0.1 on vmware 1 (redhat 5.3)

Dears
I have installed CRS 11.2.0.1 on vmware 1 at redhat 5.3 .
CRS has installed sucessfully without any error. but when execute
[oracle@RAC1 grid]$ ./runcluvfy.sh stage -post crsinst -n RAC1,RAC2 -verbose
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
Node Name                             Status
RAC2                                  passed
RAC1                                  passed
Result: CTSS resource check passed
Querying CTSS for time offset on all nodes...
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name                             State
RAC2                                  Active
RAC1                                  Active
CTSS is in Active state. Proceeding with check of clock time offsets on all nodes...
Reference Time Offset Limit: 1000.0 msecs
Check: Reference Time Offset
Node Name     Time Offset               Status
RAC2          -4700.0                   failed
RAC1          0.0                       passed
Result: PRVF-9661 : Time offset is NOT within the specified limits on the following nodes:
"[RAC2]"
PRVF-9652 : Cluster Time Synchronization Services check failed
Post-check for cluster services setup was unsuccessful on all the nodes.
[oracle@RAC1 grid]$ After That I checked on RAC1
[oracle@RAC1 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): 0
[oracle@RAC1 ~]$
and on RAC2
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -4700
[oracle@RAC2 ~]$ But when some time ago i checked it was
oracle@RAC1 ~]$
[oracle@RAC1 ~]$ cluvfy comp clocksync -n all
Verifying Clock Synchronization across the cluster nodes
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
CTSS resource check passed
Querying CTSS for time offset on all nodes...
Query of CTSS for time offset passed
Check CTSS state started...
CTSS is in Active state. Proceeding with check of clock time offsets on all nodes...
Check of clock time offsets passed
Oracle Cluster Time Synchronization Services check passed
Verification of Clock Synchronization across the cluster nodes was successful.
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): 0
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$
and on RAC2 is was
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -800
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -800
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -900
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -900
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -1000
[oracle@RAC2 ~]$ So, I am seeing that in RAC2, CTSS is not working properly . I don't know why it's time Offset is increasing ?
Thanks&Regards
Muhammad Abdul Halim
http://halimdba.blogspot.com

Dears
I have installed CRS 11.2.0.1 on vmware 1 at redhat 5.3 .
CRS has installed sucessfully without any error. but when execute
[oracle@RAC1 grid]$ ./runcluvfy.sh stage -post crsinst -n RAC1,RAC2 -verbose
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
Node Name                             Status
RAC2                                  passed
RAC1                                  passed
Result: CTSS resource check passed
Querying CTSS for time offset on all nodes...
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name                             State
RAC2                                  Active
RAC1                                  Active
CTSS is in Active state. Proceeding with check of clock time offsets on all nodes...
Reference Time Offset Limit: 1000.0 msecs
Check: Reference Time Offset
Node Name     Time Offset               Status
RAC2          -4700.0                   failed
RAC1          0.0                       passed
Result: PRVF-9661 : Time offset is NOT within the specified limits on the following nodes:
"[RAC2]"
PRVF-9652 : Cluster Time Synchronization Services check failed
Post-check for cluster services setup was unsuccessful on all the nodes.
[oracle@RAC1 grid]$ After That I checked on RAC1
[oracle@RAC1 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): 0
[oracle@RAC1 ~]$
and on RAC2
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -4700
[oracle@RAC2 ~]$ But when some time ago i checked it was
oracle@RAC1 ~]$
[oracle@RAC1 ~]$ cluvfy comp clocksync -n all
Verifying Clock Synchronization across the cluster nodes
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
CTSS resource check passed
Querying CTSS for time offset on all nodes...
Query of CTSS for time offset passed
Check CTSS state started...
CTSS is in Active state. Proceeding with check of clock time offsets on all nodes...
Check of clock time offsets passed
Oracle Cluster Time Synchronization Services check passed
Verification of Clock Synchronization across the cluster nodes was successful.
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): 0
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$
and on RAC2 is was
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -800
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -800
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -900
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -900
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -1000
[oracle@RAC2 ~]$ So, I am seeing that in RAC2, CTSS is not working properly . I don't know why it's time Offset is increasing ?
Thanks&Regards
Muhammad Abdul Halim
http://halimdba.blogspot.com

Mailx not working in zones

mailx working fine with global zone but not working with anyone of the non-global zone on that machine. I tried restarting smtp, copied /etc/mail/ dir form global zone to not-global zone but nothing worked out. Please help me out.
# mailx [email protected]
Subject: test
test body
EOT
/home/tsaini/Mailboxes/Out-Box: No such file or directory

Thanks Michael for your response. I fixed the issue. i did the following things.
1> Edit /etc/nsswitch.conf
# consult /etc "files" only if nis is down.
hosts: files dns nis
2> touch /etc/resolv.conf and put all the nameservers ( it was not copied by default when zone was created)
3>touch /etc/defaultrouter ( it was not copied by default when zone was created)
bash-3.00# /etc/init.d/sendmail stop
bash-3.00# /etc/init.d/sendmail start

For the 10^6 time -- JMF on Fedora does not work!

I've tried everything under the Sun (no pun intended), and I've seen many other people with this same problem, but no solution...
(1) I installed the performance pack version of JMF 2.1.1 for Linux.
(2) I modified my .bash_profile to read as follows...
PATH=/usr/java/j2re1.4.2_06/bin:$PATH
export PATH
JAVA_HOME=/usr/java/j2re1.4.2_06
export JAVA_HOME
JMFHOME=/usr/java/JMF-2.1.1e
CLASSPATH=$JMFHOME/lib/jmf.jar:.:${CLASSPATH}
export JMFHOME CLASSPATH
LD_LIBRARY_PATH=$JMFHOME/lib:${LD_LIBRARY_PATH}
(3) Just to beat a dead horse, I even copied-pasted the following:
/JMF-2.1.1e/lib/*.jar --> /usr/java/j2re1.4.2_06/lib/ext/
/JMF-2.1.1e/lib/*.so --> /usr/java/j2re1.4.2_06/lib/i386/
both *.jar and *.so --> /usr/mozilla/plugins/
(4) But when I try running the online diagnostic applet
http://java.sun.com/products/java-media/jmf/2.1.1/jmfdiagnostics.html
I get the following:
Java 1.1 compliant browser.....Maybe
JMF classes.....Not Found
and none of the sample JMF apps on the Sun website work.
Any clues at all??? Does JMF not work on Fedora???
I guess I'll just keep asking this question every few days until someone from Sun answers?
Thanks anyways...

Yes, I didn't make that clear (first thing in the morning). Even though the JMF Diagnostic applet doesn't work for me on RedHat 9.0 using the Java Plugin with JDK 1.4.2, JMF DOES work for me from the command line. It seems that the Java 1.4.2 Plugin isn't finding JMF on the path. For me, the Java 1.5 Plugin resolves this issue.
Scott

LD_ASSUME_KERNEL does not work in recent distros. How to avoid?

LD_ASSUME_KERNEL=2.4.XX does not work in all recent distros.
$ export LD_ASSUME_KERNEL=2.4.20
$ ls
ls: error while loading shared libraries: librt.so.1: cannot open shared object
EBS contains very old cmponents like MWA wich not compiled without this setting. How to avoid errors?

You can unset LD_ASSUME_KERNEL and EBS 11i (11.5.9 and 11.5.10) will work fine on 2.6.16 kernels (SLES-10 and RH 5.0).
The following instructions should get you going:
1) Setup the environment as you would for running Applications on RH 4 or SLES9
I.E. follow Oracle Applications Installation Update Notes, Release 11i (11.5.10.2)
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=316806.1
2) Remove any LD_ASSUME_KERNEL references in O/S /etc/profile.d files
3) Comment out LD_ASSUME_KERNEL entries in $ORACLE_HOME/appsutil/bin/adgetlnxver.sh and $AD_TOP/bin/adgetlnxver.sh
if [ ${setflag}x = "x" -a $os = "Suse" ]; then
# LD_ASSUME_KERNEL="2.4.21"
# export LD_ASSUME_KERNEL
     os="Suse"
fi
if [ ${setflag}x = "x" -a $os = "RH" ]; then
# LD_ASSUME_KERNEL="2.4.19"
# export LD_ASSUME_KERNEL
     os = "RH"
fi
If doing a rapid install, the database startup will fail and rapidwiz will prompt to ignore or retry. At this point, edit $ORACLE_HOME/appsutil/bin/adgetlnxver.sh as shown above and click on retry. It will then run to the autoconfig step at the end and error out. Just hit cancel, edit $AD_TOP/bin/adgetlnxver.sh and run autoconfig.
On Suse, one needs compat-gdbm for libgdbm.so.2
rpm -Uhv compat-gdbm-1.8.0-7.i586.rpm
Preparing... ########################################### [100%]
1:compat-gdbm ########################################### [100%]
Also in /usr/lib run ln -s libdb.so.2 libdb.so.3
Ref:
Note:300807.1 for Suse
create symbolic link called libdb.so.2 pointing to libdb.so.3, as follows:
$ cd /usr/lib
$ ln -s libdb.so.3 libdb.so.2 (or install db1-1.85-85.1 which does the same)
Note:294043.1 for Red Hat
As per an internal Bug 4045349, this is an issue with O/S side installation of compat-db rpm.
libdb.so.3 gets installed when compat-db rpm is installed.
- The O/S installation CD would contain compat-db
e.g compat-db-4.1.25-6.i386.rpm ( may change as per your version ).
- Manually install the compat-db rpm
e..g "rpm -ivh compat-db-4.1.25-6.i386.rpm"
OR
Note:345172.1
A library is missing: libdb.so.2 is from gnome-libs-1.4.1.2.90-34.1.i386.
This error also occurs in SLES9, same cause, slightly different resolution. SLES9 comes with libdb.so.3 and libdb.so.4 but not libdb.so.2 - need to install db1-1.85-85.1 to get libdb.so.2.
4) In order to relink cplex library executables (MSC, MSO, MSR, MST, WIP, etc), edit $AD_TOP/bin/adrelinknew.sh and add the following LD option (-Wl,--noinhibit-exec) in the LINUX section:
LINUX)
LDFLAGS='-s -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs -ldl'
DEBUG_LDFLAGS='-g -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs -ldl'
exe_line='ELF .*executable'
SHRLIB_LD='gcc'
LD='gcc'
SHRLIB_LDFLAGS='-L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs -shared'
if test -f "/etc/redhat-release"; then
     CPP_LIBS='/usr/lib/libstdc++-2-libc6.1-1-2.9.0.so'
elif test -f "/etc/SuSE-release"; then
     CPP_LIBS='/usr/lib/libstdc++.so.2.9'
else
CPP_LIBS=''
fi
CPP='g++'
CPP_LDFLAGS='-s -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs
set CPP_LDFLAGS='-s -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs
to CPP_LDFLAGS='-s -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs -Wl,--noinhibit-exec'
After this chance, you can apply any MRP, ASCP patch and all executables will relink correctly. You can also use adadmin to relink all executables and it completes without error.
5) Discoverer 4.1.38.08 Follow Metalink Note 280598.1 Discoverer 4i On Linux: Required Patch and Configuration for Discoverer Server Stability to use JDK 1.3.1 and oadj. I updated the autoconfig template files with this change after applying 3895177. Discoverer viewer and plus standard BIS reports all open correctly on SLES-10

Oracle not available on redhat linux 7.0

Hello frineds ,
I successfully install oracle 9iAPS on RedHat Linux 7.0 , My purpose to run oracle 8.1.7
and it was done successfully , But getting a problem while creating database
1. :- dbassist and copy database from cdrom but at the end approximately 80 % to 82%
it give me error oracle not available or end-of-file on communication channel
2:- SVRMGRL while connection as internal/oracle and tried to create database it give me error like
ORACLE NOT AVAILABLE

Hi
At windows You must create a service to hadle oracle threads. On linux this is not working in same way, You do not need a "service" to bind thread or process to it.
simple set environment variables
and start sqlpus session with create database command, and so on.
Maybe You should read oracle admin guide for linux.

Here are scripts for getting OAS302 working on RedHat 6.0

People have said this doesn't work. It works. It's just the
owsctl that doesn't work. I'm not saying that oas302 on RedHat 6
is the best solution anyone could come up with, but it does work,
and if you want to do it, here are some scripts that you can feel
free to modify and use as you wish. Various variables should be
updated with however you system is configured. Remember to start
the wrb (i.e. the second script) before you start any listeners.
Linux has a tendency to crash if you don't kill -KILL all the wrb
processes at the same time (i.e. the kernel gets an uncaught
exception and dies).
Erik
<disclaimer>
I do not guarantee these will work. I do not guarantee that
they will not destroy something important. I assume no liability
for what these scripts may or may not do. Use them at your own
risk. There is no expressed or implied waranty.
</disclaimer>
#!/bin/ksh
# Script to start the oraweb http servers to listen for requests
# because owsctl is kind of unpredictable under RedHat 6.0
# set this variable to be the directory that the webserver
# configuration drivetoryies are under (i.e.
# /db/app/oracle/admin/ows/web/httpd_my.host.com)
WEB_HOME=/db/app/oracle/admin/ows/web/httpd_my.host.com
LISTENER="$2"
if [[ -z "$LISTENER" ]]
then
echo "No listener name to start."
echo "Usage: listen {start|stop} listener"
echo "e.g.:"
echo " listen start admin"
exit 1
fi
case "$1" in
start)
OMN_ADDR=UDP:worf.gcg.com:2649
OWS_ADPCFG="$ORAWEB_HOME/admin/adpspy.cfg"
OWS_ADPSO="$ORAWEB_HOME/lib/ndwfs.so"
OWS_ORAWEB_FREEDOMX=1
export OWS_ADPCFG OWS_ADPSO OMN_ADDR OWS_ORAWEB_FEEDOMX
CFG_FILE=$WEB_HOME/$LISTENER/config/sv$LISTENER.cfg
if [[ -f "$CFG_FILE" ]]
then
oraweb -C $CFG_FILE
else
echo "Could not find config file for $LISTENER:"
echo " $CFG_FILE"
exit 1
fi
stop)
PID_FILE=$WEB_HOME/$LISTENER/config/sv$LISTENER.pid
if [[ -f $PID_FILE ]]
then
kill `cat $PID_FILE`
if [[ $? -ne 0 ]]
then
echo "Could not stop oraweb $LISTENER process."
exit 1
fi
else
echo "Could not find oraweb $LISTENER PID file:"
echo " $PID_FILE"
exit 1
fi
echo "Usage: listen {start|stop} listener"
echo "e.g.:"
echo " listen start admin"
exit 1
esac
#!/bin/ksh
# Script to start up the Oracle Web Request Broker (wrb)
# processes manually because owsctl doesn't work on RedHat
# Linux 6.0
TMP_FILE=/tmp/wrb.pids
case "$1" in
start)
SLEEP=3
if [[ -f "$TMP_FILE" ]]
then
echo "$TMP_FILE exits. Make sure the wrb is not
already"
echo "running, remove $TMP_FILE, and run this script
again."
exit 1
fi
if [[ -z "$ORAWEB_HOME" ]]
then
echo "ORAWEB_HOME is not set. This environment variable"
echo "should be set to the directory where the oracle was"
echo "lives, i.e. /app/oracle/product/8.0.5/ows/3.0"
exit 1
fi
OMN_ADDR=UDP:my.host.com:2649
OWS_ADPCFG="$ORAWEB_HOME/admin/adpspy.cfg"
OWS_ADPSO="$ORAWEB_HOME/lib/ndwfs.so"
OWS_ORAWEB_FEEDOMX=1 # I have no idea what this does; I read
# about it in a newsgroup. Supposedly
# it makes the oas run faster
export OWS_ADPCFG OWS_ADPSO OMN_ADDR OWS_ORAWEB_FREEDOMX
PATH=$ORAWEB_HOME/bin:$PATH
mnaddrsrv -D &
echo -n "$! " > $TMP_FILE
sleep $SLEEP
mnrpcnmsrv &
echo -n "$! " >> $TMP_FILE
mnorbsrv &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbcfg &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrblog &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbasrv &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbahsrv &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbroker &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbvpm &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbfac &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbdm &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
stop)
kill -KILL `cat $TMP_FILE`
if [[ $? -ne 0 ]]
then
echo "Could not stop wrb processes. The PIDs are in"
echo "$TMP_FILE. If these are running, please"
echo "stop them manually."
else
rm -rf $TMP_FILE
fi
echo "Usage: wrb {start|stop}"
exit 1
esac
null

Hi Erick,
Your scripts for running the OAS302 on 6.0 linux had been very
helpful.
In fact, I dont know what would I have done without them.
Now I am able to run the listeners and even able to create the
packages and users in the database via the OAS 3.0.2 but the
problem starts when accessing a procedure in the database using
the pl/sql agent. By the way i am using Oracle 8.0.5.1 RDBMS and
its home is different than the webserver home.
The browser just does nothing and even does not log any error
message ,I have to stop it after a while but all my other
catridges are working.
any insight will be appreciated.
thanks,
Vikram ( Ironically enough I work for Oracle).
Erik Nielsen (guest) wrote:
: People have said this doesn't work. It works. It's just the
: owsctl that doesn't work. I'm not saying that oas302 on RedHat
6
: is the best solution anyone could come up with, but it does
work,
: and if you want to do it, here are some scripts that you can
feel
: free to modify and use as you wish. Various variables should
be
: updated with however you system is configured. Remember to
start
: the wrb (i.e. the second script) before you start any
listeners.
: Linux has a tendency to crash if you don't kill -KILL all the
wrb
: processes at the same time (i.e. the kernel gets an uncaught
: exception and dies).
: Erik
: <disclaimer>
: I do not guarantee these will work. I do not guarantee that
: they will not destroy something important. I assume no
liability
: for what these scripts may or may not do. Use them at your own
: risk. There is no expressed or implied waranty.
: </disclaimer>
: #!/bin/ksh
: # Script to start the oraweb http servers to listen for
requests
: # because owsctl is kind of unpredictable under RedHat 6.0
: # set this variable to be the directory that the webserver
: # configuration drivetoryies are under (i.e.
: # /db/app/oracle/admin/ows/web/httpd_my.host.com)
: WEB_HOME=/db/app/oracle/admin/ows/web/httpd_my.host.com
: LISTENER="$2"
: if [[ -z "$LISTENER" ]]
: then
: echo "No listener name to start."
: echo "Usage: listen {start|stop} listener"
: echo "e.g.:"
: echo " listen start admin"
: exit 1
: fi
: case "$1" in
: start)
: OMN_ADDR=UDP:worf.gcg.com:2649
: OWS_ADPCFG="$ORAWEB_HOME/admin/adpspy.cfg"
: OWS_ADPSO="$ORAWEB_HOME/lib/ndwfs.so"
: OWS_ORAWEB_FREEDOMX=1
: export OWS_ADPCFG OWS_ADPSO OMN_ADDR OWS_ORAWEB_FEEDOMX
: CFG_FILE=$WEB_HOME/$LISTENER/config/sv$LISTENER.cfg
: if [[ -f "$CFG_FILE" ]]
: then
: oraweb -C $CFG_FILE
: else
: echo "Could not find config file for $LISTENER:"
: echo " $CFG_FILE"
: exit 1
: fi
: stop)
: PID_FILE=$WEB_HOME/$LISTENER/config/sv$LISTENER.pid
: if [[ -f $PID_FILE ]]
: then
: kill `cat $PID_FILE`
: if [[ $? -ne 0 ]]
: then
: echo "Could not stop oraweb $LISTENER process."
: exit 1
: fi
: else
: echo "Could not find oraweb $LISTENER PID file:"
: echo " $PID_FILE"
: exit 1
: fi
: echo "Usage: listen {start|stop} listener"
: echo "e.g.:"
: echo " listen start admin"
: exit 1
: esac
: #!/bin/ksh
: # Script to start up the Oracle Web Request Broker (wrb)
: # processes manually because owsctl doesn't work on RedHat
: # Linux 6.0
: TMP_FILE=/tmp/wrb.pids
: case "$1" in
: start)
: SLEEP=3
: if [[ -f "$TMP_FILE" ]]
: then
: echo "$TMP_FILE exits. Make sure the wrb is not
: already"
: echo "running, remove $TMP_FILE, and run this script
: again."
: exit 1
: fi
: if [[ -z "$ORAWEB_HOME" ]]
: then
: echo "ORAWEB_HOME is not set. This environment variable"
: echo "should be set to the directory where the oracle
was"
: echo "lives, i.e. /app/oracle/product/8.0.5/ows/3.0"
: exit 1
: fi
: OMN_ADDR=UDP:my.host.com:2649
: OWS_ADPCFG="$ORAWEB_HOME/admin/adpspy.cfg"
: OWS_ADPSO="$ORAWEB_HOME/lib/ndwfs.so"
: OWS_ORAWEB_FEEDOMX=1 # I have no idea what this does; I read
: # about it in a newsgroup. Supposedly
: # it makes the oas run faster
: export OWS_ADPCFG OWS_ADPSO OMN_ADDR OWS_ORAWEB_FREEDOMX
: PATH=$ORAWEB_HOME/bin:$PATH
: mnaddrsrv -D &
: echo -n "$! " > $TMP_FILE
: sleep $SLEEP
: mnrpcnmsrv &
: echo -n "$! " >> $TMP_FILE
: mnorbsrv &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbcfg &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrblog &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbasrv &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbahsrv &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbroker &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbvpm &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbfac &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbdm &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: stop)
: kill -KILL `cat $TMP_FILE`
: if [[ $? -ne 0 ]]
: then
: echo "Could not stop wrb processes. The PIDs are in"
: echo "$TMP_FILE. If these are running, please"
: echo "stop them manually."
: else
: rm -rf $TMP_FILE
: fi
: echo "Usage: wrb {start|stop}"
: exit 1
: esac
null

Logical Standby Does not work

Hi,
I'm not sure if anyone is using the logical standby database because it appears to me to be complete rubbish. The apply of redo data just does not appear to work. for example I have this table:
create table test29(
BP_ID NUMBER(10) NOT NULL,
BP_K_ID NUMBER(10) NOT NULL,
BP_TYP CHAR(2) NOT NULL,
BP_U_ID NUMBER(10),
BP_ACTIVE DATE NOT NULL,
BP_USED NUMBER(6) NOT NULL,
BP_STATUS CHAR(1) NOT NULL,
BP_LASTUPDATE DATE NOT NULL
and insert this data:
insert into test29
select 10643,291904,'O ',1,TO_DATE('01/05/2003 00:44:18', 'MM/DD/YYYY HH24:MI:SS'),0,'A',TO_DATE('01/06/2004 20:13:08', 'MM/DD/YYYY HH24:MI:SS') from dual
When this information is transfered to the logical standby and it attempts to read it i get a ORA-26689: column datatype mismatch in LCR. But wait! If I change the name of column 6 (BP_PUNKTE) to say (BP_AAAAA) and try again it works!!! The logical standby fails on many tables just because of the name (updates, inserts anything)...did anyone at oracle test this? Is anyone using the logical standby have any ideas how and if I could ever get this working.
Using Oracle 9.2.0.4. on Redhat 2.1.
Thanks!
Steve.

unfortunately not. the oracle licence was purchased before i arrived and when I attempted to get a support contact they want the money since we purchased the licence 3 years ago. 3 years of cash for free! why should I pay for their bugs anyway, when we buy this expensive software it should work. when I buy a new car from ford and radio does not work I don't have to pay ford to fix it. rip-off!

SOA Suite 10.1.3.4 BPEL Console not working after install the mlr#4 patch

After install the mlr#4 patch for 10.1.3.4 version the BPEL console dos not work. The BEPL is up and running , I can deploy projects, all domains are fine and working (I see on the logs) but the console show the following error:
Oracle BPEL Process Manager Full Cycle
An unexpected error has occurred while executing your request. This is most likely related to a defect in the Oracle BPEL Process Manager product. We apologize you can post the error to the OTN forum and we will get back to you as soon as possible.
Build Information:
Oracle BPEL Server version 10.1.3.4.0
Build: 0
Build time: Sun Jan 11 19:33:46 PST 2009
Build type: release
Source tag: PCBPEL_10.1.3.4.0MLR#4_GENERIC_RELEASE
Exception Message:
javax.servlet.ServletException - com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
When I check the log I can see this:
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2009-01-26T16:18:33.115+02:00</TSTZ_ORIGINATING>
<COMPONENT_ID>j2ee</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>soasit.BCR.WAN</HOST_ID>
<HOST_NWADDR>172.19.128.128</HOST_NWADDR>
<MODULE_ID>security</MODULE_ID>
<THREAD_ID>15</THREAD_ID>
<USER_ID>oracle</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1232979513:172.19.128.128:4415:0:247</UNIQUE_ID><SEQ>1</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>ServletException cause</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
     at com.oracle.bpel.client.util.ExceptionUtils.handleServerException(ExceptionUtils.java:91)
     at com.oracle.bpel.client.BPELProcessHandle.getMetaData(BPELProcessHandle.java:236)
     at _ngDeployedProcesses._jspService(_ngDeployedProcesses.java:118)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_include(ServletRequestDispatcher.java:160)
     at com.evermind.server.http.ServletRequestDispatcher.access$000(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$1.oc4jRun(ServletRequestDispatcher.java:97)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
     at com.evermind.server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:102)
     at com.evermind.server.http.EvermindPageContext.include(EvermindPageContext.java:456)
     at _index._jspService(_index.java:104)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
     at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:230)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.handleNotFound(HttpRequestHandler.java:1042)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:911)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
     at java.lang.Class.getMethod(Class.java:1581)
     at com.evermind.server.ejb.interceptor.MethodStateFactory.createMethodState(MethodStateFactory.java:112)
     at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.createMethodStates(ExposableBeanDescriptor.java:657)
     at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getRemoteComponentMethodStates(ExposableBeanDescriptor.java:723)
     at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getMethodState(ExposableBeanDescriptor.java:599)
     at com.evermind.server.ejb.AbstractEJBObject.OC4J_getMethodState(AbstractEJBObject.java:385)
     at ProcessManagerBean_RemoteProxy_4bin6i8.getMetaData(Unknown Source)
     at com.oracle.bpel.client.BPELProcessHandle.getMetaData(BPELProcessHandle.java:232)
     ... 52 more
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
If I rollback the mlr#4 , everithink works fine. With mlr#3, mlr#2 the problem is the same.
The platform is one for development installer on RedHat 5 OS.
Any ideea ?
Edited by: [email protected] on Jan 26, 2009 4:34 PM

Man Christian!
1000 Thanks for your tip. I run into same issue on W2K3 with 10.1.3.4 MLR#4 (so far last MR allowed for AIA apps).
I had the orabepl.ear file of the size as was mentioned earlier: 2.530.260 in the bpel\system and other one on the j2ee\ocj4_soa\applications folder.
Copying did not help.
I had to perform following steps from the <MLR#4>/custom/scripts/post.bat file which takes the file from the bpel\system,
ADDS some another .jars in it and ONLY THEN move it to the j2ee\...\applications folder:
copy %ORACLE_HOME%\bpel\system\j2ee\orabpel.ear %ORACLE_HOME%\bpel\system\services\lib\orabpel.ear
copy %ORACLE_HOME%\bpel\system\j2ee\ejb\oc4j_ejb_services.jar %ORACLE_HOME%\bpel\system\services\lib\ejb_services.jar
copy %ORACLE_HOME%\bpel\system\j2ee\ejb\ejb_ob_engine_oc4j.jar %ORACLE_HOME%\bpel\system\services\lib\ejb_ob_engine.jar
cd %ORACLE_HOME%\bpel\system\services\lib
%ORACLE_HOME%\jdk\bin\jar -uvf orabpel.ear ejb_services.jar ejb_ob_engine.jar
After doing manually these steps the orabpel.ear in j2ee\...\applications has got the size: 2.798.840 which was bigger as right after patch application.
Then I deleted the orabpel folder from the j2ee\...\aplication-deployments
started the j2ee containe (it was named: oc4_soa ) and the BPEL Console started live well as before in 10.1.3.3
As I did verify from other files The rest of steps from the post.bat file seems did well, only this part was not executed.
With Best Regards,
Alexey

Wifi with stock kernel driver rtl8192ce not working consistently

Hi,
My wifi card RTL8188CE does not work consistently with kernel driver rlt8192ce. The problem that i observe is that after some time ~1hr wifi devices get disconnected and are not able to reconnect. On restarting wifi using systemctl restart hostapd sometimes the system hangs.
Here are the outputs.
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
Subsystem: ASUSTeK Computer Inc. Device 84b5
Kernel driver in use: rtl8192ce
Kernel modules: rtl8192ce
Logs
Jan 22 19:30:56 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:56 Blitz-4 kernel: [color=red]rtl8192ce 0000:05:00.0: swiotlb buffer is full (sz: 105 bytes)[/color]
Jan 22 19:30:56 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:56 Blitz-4 kernel: rtl8192ce 0000:05:00.0: swiotlb buffer is full (sz: 105 bytes)
Jan 22 19:30:56 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: rtl8192ce 0000:05:00.0: swiotlb buffer is full (sz: 105 bytes)
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: rtl8192ce 0000:05:00.0: swiotlb buffer is full (sz: 105 bytes)
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:58 Blitz-4 kernel: BUG: unable to handle kernel paging request at 000060240000801d
Jan 22 19:30:58 Blitz-4 kernel: IP: [<ffffffff811b29a6>] __kmalloc+0x86/0x1c0
Jan 22 19:30:58 Blitz-4 kernel: PGD 0
Jan 22 19:30:58 Blitz-4 kernel: Oops: 0000 [#1] PREEMPT SMP
Jan 22 19:30:58 Blitz-4 kernel: Modules linked in: nls_iso8859_1 nls_cp437 vfat fat ctr ccm fuse bridge stp llc snd_hda_codec_hdmi arc4 mousedev hid_generic coretemp hwmon ppdev intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel rtl8192ce rtl_pci rtl8192c_common rtlwifi kvm mac80211 crct10dif_pclmul crc32_pclmul evdev crc32c_intel mac_hid uas ghash_clmulni_intel usb_storage usbhid cfg80211 hid snd_hda_codec_realtek snd_hda_codec_generic i915 aesni_intel iTCO_wdt iTCO_vendor_support aes_x86_64 lrw snd_hda_intel gf128mul drm_kms_helper rfkill snd_hda_controller glue_helper ablk_helper psmouse drm snd_hda_codec cryptd pcspkr serio_raw snd_hwdep intel_gtt snd_pcm i2c_i801 r8168(O) i2c_algo_bit i2c_core snd_timer parport_pc tpm_infineon snd fan thermal tpm_tis parport mei_me tpm soundcore battery mei video shpchp
Jan 22 19:30:58 Blitz-4 kernel: button lpc_ich processor sch_fq_codel ext4 crc16 mbcache jbd2 sd_mod atkbd libps2 ahci libahci libata xhci_pci ehci_pci xhci_hcd ehci_hcd scsi_mod usbcore usb_common i8042 serio
Jan 22 19:30:58 Blitz-4 kernel:CPU: 3 PID: 1238 Comm: Cache2 I/O Tainted: G O 3.18.2-2-ARCH #1
Please suggest any workaround/modules.

Same problem to me. lspci output:
07:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
and logs:
Apr 04 16:06:29 nzk kernel: rtl8192ce 0000:07:00.0: swiotlb buffer is full (sz: 9100 bytes)
Apr 04 16:06:29 nzk kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:07:00.0
Apr 04 16:06:29 nzk kernel: rtl8192ce 0000:07:00.0: swiotlb buffer is full (sz: 9100 bytes)
Apr 04 16:06:29 nzk kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:07:00.0
Apr 04 16:06:29 nzk kernel: rtl8192ce 0000:07:00.0: swiotlb buffer is full (sz: 9100 bytes)
Apr 04 16:06:29 nzk kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:07:00.0
Apr 04 16:06:29 nzk kernel: rtl8192ce 0000:07:00.0: swiotlb buffer is full (sz: 9100 bytes)
Apr 04 16:06:29 nzk kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:07:00.0
A bug report submitted to redhat bugzilla https://bugzilla.redhat.com/show_bug.cg … id=1203241 suggests it may be caused by a bug in the rtl8192ce kernel module since linux 3.17.7. I hope this problem could be solved as quickly as possible.
Last edited by mike_nzk (2015-04-04 08:33:59)

Toshiba Front Operation Panel/Illumination Keys not working

I am unable to toggle wireless on/off, mute/unmute, play/pause using Front operation panel LED keys on my Toshiba Qosmio F60. Currently I need to enable WiFi/Bluetooth from within Windows for it to work. Fn+F8 toggle works as soft block/unblock only if I have already enabled WiFi under Windows. Any ideas as how this can be done? The only LED Touch button that works under Debian/Ubuntu/Fedora is the Volume Up/Down button. Touchpad on/off toggle does not work with physical button above the touchpad or Fn+F9 either. Other Fn+ keys work eg., Fn+Esc for mute/unmute, Fn+F1 for lock etc.
Interestingly even when the WiFi is turned off from within Windows on booting Arch with a pen-drive wifi-menu command detects all surrounding wireless networks properly for the first time. Even rfkill shows as hardware unblocked. But once a network is selected it fails and the subsequent rfkill commands show as hardware blocked.
These problems seems related to Direct App Launch Button which probably can be solved in Linux by quickstart http://quickstart.sourceforge.net/
I had raised a thread in Ubuntu, Debian, Red Hat forums as well
http://ubuntuforums.org/showthread.php?t=2150307
http://forums.debian.net/viewtopic.php?f=5&t=108921
https://bugzilla.redhat.com/show_bug.cgi?id=1074504
https://bugzilla.kernel.org/show_bug.cgi?id=72711
The buttons look like this http://www.manualslib.com/manual/180150 … 159#manual
Last edited by solomonsunder (2014-04-21 11:26:16)

I get the below output when I run showkey -k
Fn+1 (Zoom In)
keycode 419 press
keycode 419 release
Fn+2 (Zoom out)
keycode 418 press
keycode 418 release
Fn+Space (Zoom)
keycode 420 press
keycode 420 release
Fn+F8 (Wireless Toggle)
keycode 238 press
keycode 238 release
Fn+F9 (Touchpad Toggle)
keycode 530 press
keycode 530 press
These are soft keys mentioned here http://www.manualslib.com/manual/180150 … 134#manual
The front panel buttons and the small physical touchpad toggle button above the touchpad do not generate any codes. The Fn+F8 is a multi toggle in Windows after wireless is turned on through the front panel button (first press WiFi on, second press Bluetooth on, third press both WiFI, Bluetooth on, fourth press both off). Also there is no ouput for scancodes when I run showkey -s or xev. Am I missing anything?
Last edited by solomonsunder (2014-04-22 13:22:22)

Oracle instant Client and unixODBC for Linux not work

Hi experts,
I have two Redhat EL 5. On the first Rehat(xxx.xxx.xxx.121 --> called Redhat1) I have installed Oracle 10g database server. On the second Redhat(xxx.xxx.xxx.123 --> called Redhat2) I want to connect to Oracle database server on xxx.xxx.xxx.121 via ODBC. But it does not work. Pls help me!
I have done steps as following:
Login to Redhat2 as root and type commands:
1)Install Instant Client + sqlplus
# rpm -ivh oracle-instantclient-basic-10.2.0.4-1.i386.rpm
# rpm -ivh oracle-instantclient-sqlplus-10.2.0.4-1.i386.rpm
2)Setting environment variable
# LD_LIBRARY_PATH=/usr/lib/oracle/10.2.0.4/client/lib:${LD_LIBRARY_PATH}; export LD_LIBRARY_PATH
# SQLPATH=/usr/lib/oracle/10.2.0.4/client/lib:${SQLPATH}; export SQLPATH
3)Testing connection to Redhat1(Oracle DB server) using sqlplus
# sqlplus abc/[email protected]:1521/lab2
Connected.
5)Begin to install unixODBC
# rpm -ivh oracle-instantclient-odbc-10.2.0.4-1.i386.rpm
# rpm -ivh unixODBC-2.2.11-7.1.i386.rpm
# rpm -ivh unixODBC-devel-2.2.11-7.1.i386.rpm
# rpm -ivh unixODBC-kde-2.2.11-7.1.i386.rpm
6)After installation above packages I check for existing of odbc.ini and odbcinst.ini in /etc --> ok
# ls /etc | grep odbc
odbc.ini
odbcinst.ini
7) Tar unixODBC-2.2.14-linux-x86-32.tar.gz and copy file to /usr/local/bin, /usr/local/include, /usr/local/lib
# tar -xzf unixODBC-2.2.14-linux-x86-32.tar.gz
# ls /usr/local/bin/
dltest isql iusql odbc_config odbcinst
# ls /usr/local/include
autotest.h odbcinstext.h odbcinst.h sqlext.h sql.h sqltypes.h sqlucode.h unixodbc_conf.h uodbc_extras.h uodbc_stats.h
# ls /usr/local/lib
libboundparam.la libgtrtst.la libodbccr.la libodbcinst.la libodbc.la
libboundparam.so libgtrtst.so libodbccr.so libodbcinst.so libodbc.so
libboundparam.so.1 libgtrtst.so.1 libodbccr.so.1 libodbcinst.so.1 libodbc.so.1
libboundparam.so.1.0.0 libgtrtst.so.1.0.0 libodbccr.so.1.0.0 libodbcinst.so.1.0.0 libodbc.so.1.0.0
# NLS_LANG=AMERICAN_AMERICA.UTF8; export NLS_LANG
# TNS_ADMIN=/root; export TNS_ADMIN
# ODBCINI=/etc/odbc.ini; export ODBCINI
7)Retest sqlplus to Redhad1(Oracle database server) with local tnsname
# sqlplus vonphoto/vonphoto@lab2
SQL*Plus: Release 10.2.0.4.0 - Production on Sat Mar 27 03:20:55 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
8) Edit odbc.ini and odbcinst.ini
---odbcinst.ini
# Included in the unixODBC package
[Oracle 10g ODBC driver]
Description = Oracle ODBC driver for Oracle 10g
Driver = /usr/lib/oracle/10.2.0.4/client/lib/libsqora.so.10.1
Setup =
FileUsage =
CPTimeout =
CPReuse =
---odbc.ini
[ora_dns]
Driver = Oracle 10g ODBC driver
DSN = ora_dns
ServerName = xxx.xxx.xxx.121
UserID = vonphoto
Application Attributes = T
Attributes = W
BatchAutocommitMode = IfAllSuccessful
BindAsFLOAT = F
CloseCursor = F
DisableDPM = F
DisableMTS = T
EXECSchemaOpt =
EXECSyntax = T
Failover = T
FailoverDelay = 10
FailoverRetryCount = 10
FetchBufferSize = 64000
ForceWCHAR = F
Lobs = T
Longs = T
MetadataIdDefault = F
QueryTimeout = T
ResultSets = T
SQLGetData extensions = F
Translation DLL =
Translation Option = 0
DisableRULEHint = T
TraceFile = /backup/sql.log
Trace = Yes
9)Testing the driver and the data source
# odbcinst -q -d
[Oracle 10g ODBC driver]
# odbcinst -q -s
[ora_dns]
10) Test connection via ODBC from Redhat2(xxx.xxx.xxx.123) to Redhat1(xxx.xxx.xxx.121)
# isql -v ora_dns
isql: error while loading shared libraries: libreadline.so.3: cannot open shared object file: No such file or directory
I have spent 4 days to search on the internet. But it still error.
Pls help me.

I don't understand your step 7 (the first step 7, actually).
What is that unixODBC-2.2.14-linux-x86-32.tar.gz, where did it come from, and why are you doing all that?
unixODBC should be installed after step 5.
I guess that that is the cause of your problem.
isql is not linked against readline at all on my RHEL 5 system.
Do you notice any improvement after removing the files from that tar.bz file?
Yours,
Laurenz Albe

Logging not working in RH Linux (ALUI portal 6.1MP1)

Hi,
we've installed the ALUI portal 6.1MP1 on a RedHat Enterprise Linux 4, and the logging does not seem to be working - PTSpy does not show anything.
We've also installed the same portal version on a couple of Windows machines - there the logging works fine.
Any ideas on where to look for possible causes?

fwiw, I recently installed ALUI 6.1 MP1 on RHEL 4 Update 3 and was able to have both the Spy Logger and the consolelogger working locally on the RHEL console (running GNOME).
I then tried to access the RHEL virtual machine from my host Windows OS where I access things via Cygwin (startx) and Putty (SSH). Spy Logger still does not work (because of the SWT issues I mentioned earlier) but consolelogger works fine.
If you are still having issues I'd encourage you to open a case with tech Support.
john

Triggers not working in Oracle 9iAS

The form triggers are not working in oracle 9i AS.
My Application server has Linux operating system with oracle form/report server installed. I am able to upload the form
in the client machine (using Internet Explorer Win98 OS). Also i can feed in the data but none of my triggers are working (WHEN BUTTON PRESSED and other validation triggers).
Can anyone suggest what to do pls.
Tnks in advance
Rgds
Manoj Philip
[email protected]

Well we've tested on Linux and the trigger do work - I remember two other postings on this forumn from prople with the same problem:
Re: SQL Developer Necessities
Re: About EXPLAIN PLAN table
In one case the problem was not re-compiling using f90genm.sh, in the other it was something to do with the Machine setup but I don't know what the final resolution was.
The only other thing is to make sure that you are on a certified linux release for using with iAS e.g. Redhat Server 2.1 and Suse Enterprise server 7 and Untited Linux
You can check the current certifications on Metalink.oracle.com

Mailx is not working on redhat 5

Similar Messages

Maybe you are looking for