Mailx unable to send mails to outside world?

hi
on a solaris sparc 9 environment mailx command is unable to send mails to the outside world. What could be the reason & needs to be checked?
thanks

sounds basic, but what's your entry of malhost in /etc/hosts pointing to? If it's not there, add the entry with the IP address of your SMTP host.
when sending test mail from mailx, have another window open thats tail-ing the contents of /var/log/syslog - that usually contains good info about sendmail.
another thing worth checking is the rules on your SMTP gateway. If this is a new host, it may need adding to the list of authorised relay list. Also check to see if the SMTP host is alowed to relay mail outside of its own domain too.

Similar Messages

  • Unable send mails to outside world thru centeral mail host

    I have installed IMS 5.1 on solaris 8 . I could able to send mails internal users (in the same server) I could able to receive external mails. But I am unable to send mails to outside world. I have to send mails to corporate mails server. Pls can u help me out . My server Ip is 191.254.4.10 and 191.254.1.28 is corporate mail server.

    What error message or messages are you getting when you try to send?
    I suspect you need to do things. First change your INTERNAL_IP mapping to allow those IP or networks that you wish to be able to relay through your host. Second you need to use a smart host, i.e. the mail hub you talk about. To do that look at putting the daemon channel keyword on the tcp_local channel.

  • Unable to send mail to outside domain users

    Hey Folks,
    Does anyone has a clue why OCS won't relay email message outside the domain?
    I successfully completed a single box OCS R2 install on Redhat AS 2.1 kernel 2.4.9-e5. Everything works fine except sending email outside of the domain.
    Thanks in advance for the help.
    Rene

    I'm getting the following message once I click on "SEND" to e-mail to an existing yahoo e-mail.
    Error : Your message has not been sent because of unknown recipient(s). Please correct the email addresses of your recipient(s) and re-send.
    <username>@yahoo.com
    I increased the trace level on the SMTP_OUT to 30 but still not getting explicit info on that behavior, except some Trace 21 and 22 with no clear meaning.
    Thanks,
    Rene

  • Unable to send Mail from POP account

    I have an Iphone 4 and have upgraded the IOS from 5-1 to 6.1.3. Since then I have been receiving all my mails but i have been unable to send mails from my POP account. the notification "Cannot Send Mail. A copy has been placed in your Outbox. The receipient, "xxyyzz @ gmail . com " was rejected by the server" displayed. Please Help. the same thing happens when I configure my POP account on my Son's Iphone4, and there is no problem in receiving and sending mails from my Outlook. Please Help!!!!!
    Can i revert back to IOS5.1.1?????

    Contact your email provider and get the correct settings to use for the outgoing mail server (SMTP) on a mobile device. If it's email provided by your ISP, they have likely blocked email from outside their network from relaying to prevent spam.

  • Unable to SEND mail using Activesync in Exchange 2010 server on iPhone or Windows Mobile 6.1

    Hi All,
    We've been setting up a new SBS 2011 server for a client this week. Everything is working, except the staff have 4 x iPhones to connect with Exchange ActiveSync.
    There are 2 x iPhone 4's and 2 x iPhone 3Gs's. We can setup the Exchange accounts on each of the phones and they are all able to sync mail and calender etc with the server.
    The problem we have is when any of them try to send mail from the phone, it gives an error : "Cannot Send Mail - An error occurred while delivering this message" and it sits in the outbox on the phone.
    The newsgroups and forums are littered with people having issues with IOS4 and Exchange 2010 but most of these are from June-August 2010 when IOS4 version was around 4.00 or 4.01
    A lot of these people had iPhone 3 handsets running with IOS 3.1.3 which worked with Exchange 2010 but when they upgraded to IOS 4, they had this problem sending mail.
    It seems that for most of them, the fix came in the form of IOS version 4.1 which fixed the send issue for them.
    We have a variety of Hansets and IOS versions (including an iPhone 3Gs running IOS 3.1.3) but are unable to send mail from any of them:
    iPhone 3Gs    IOS 3.1.3
    iPhone 3Gs    IOS 4.3.3
    iPhone 4       IOS 4.3.3
    iPhone 4       IOS 4.3.5
    I was surprised that the iPhone 3Gs running 3.1.3 was unable to send either as nearly all the forums etc I read with this issue said the iPhone 3's worked with that IOS version.
    Today we used a test iPhone 4 handset from our office to connect to an almost identical Small Business Server 2011 we setup two weeks ago for another client.
    The test iPhone 4 was able to connect, Sync and Send email on that server but when set it to connect to this SBS 2011 server, it gets the "Cannot Send Mail" message the same as the others. So clearly the handset is working (on the other server at least),
    it must be something misconfigured in this Exchange server right?
    We ran the Exchange Remote Connectivity Analyser on the Exchange server and got green ticks across the board.
    Outlook Web App and Outlook Anywhere both work normally. Everything we can test on the Exchange server works except sending from any iPhone.
    Having said all that, I just setup a Windows Mobile 6.1 handset to sync with the Exchange 2010 server as a test, and it appears to have the same issue.
    It will connect & Sync Mail, Contacts and Calendar but if trying to send an email from the phone, it will just sit in the outbox.
    Does anyone have some insight into what the problem may be?

    Further to this .. I found the solution on a MS Exchange 2010 support forum.
    It was not a certificate or firewall issue, looks as thought the “Accepted Domains” in Exchange Mgmt Console –
    Org Config – Hub Transport cannot have any spaces in the name field.
    I had some spaces and the emails were not downloading fully and able to send. Once I removed the spaces from the Name field and
    restarting the Exchange and IIS services emails were now being sent and received ok.
     Check
    out :
    http://social.technet.microsoft.com/Forums/en-US/exchangesvrmobility/thread/321eae51-9cbd-4a5e-85c1-68d8f7b523c3
     This
    is good one to add to your knowledge bank in case you come across it in the future.
    Rgds Gerry

  • Unable to send mail- mail remains in outbox and I receive error message

    Ok, I have used Mail for years. All of a sudden I am unable to send mail. The mail goes to the outbox and then I receive the following error message.
    This message could not be delivered and will remain in your Outbox until it can be delivered.
    The server "smtp.mac.com" refused to allow a connection on port 25.
    I can connect to webmail of course and send mail that way.
    I receive mail perfectly.
    Not sure what to do...??
    Thank you for any help with this.

    Read the following article, which applies to all versions of Mac OS X (not just Mac OS X 10.4.2 and earlier as the article states) and can be useful for other mail accounts as well (not just .Mac):
    .Mac: Server timeout alert message when sending email

  • Adobe acrobat error - unable to send mail

    I`m using Win 7 pro 64bit with acrobat 9.0 pro 32 bit.
    I am now unable to send .PDF`s from either the toolbar or from the File, attach mail.
    The system says Ädobe acrobat error - unable to send mail"
    Any hep would be appreciated.
    Many thanks

    I don't remember much of Acrobat 9...
    What email client are you using?  Are the Acrobat preferences configured to use that email client?  Is it running when you try to send that document?
    [topic moved to Acrobat forum]

  • Unable to send mails to outlook from sap system through workflow

    Hi ,
    Iam unable to send mails to outlook from sap system through work flow .Actually we r able to send mails from sap inbox to outlook successfully.But when trying with workflow we r not able to send.Please guide me that is  there any configurations required from BASIS side for work flow.Actually we configured everything like default domain .
    Please find the errors belows that  traced from sost t code
    02/13/2012     17:50:12     0380 MIME_MESSAGE_GENERATE     G     Error when generating MIME flow
    02/13/2012     17:50:12     0382 MIME_MESSAGE_GENERATE     G     Required 'From' header is initial
    02/13/2012     17:50:12     0167 SO_OBJECT_MIME_GET     G     Error during MIME Generation
    02/13/2012     17:50:12     0777 UPDATE_SOSC     G     Cannot process message in SAP System
    Regards
    RAGHAVENADAR

    Hello,
    Actually i checked the mail ID for WF-BATCH  using su01 .But i didnt find any mail ID for WF-BATCH then i added the email address of the user.Then we tried sending mail it was successfull.
    But later i removed the email address what i entered in WF-BATCH user .Even after removing the email address also iam able to send the mails through workflow.
    So iam confused whether it needs an mail address or not.But now we are able to send a mail to outlook through work flow but not able to send mails to GMAILor yahoo.For that we need to do any settings.
    ABAPer is sending mails through work flow.
    Regards
    RAGHAVENDAR M

  • "Unable to send mail" using Verizon email account

    No matter what I try, my Incredible will not send an email using my Verizon email account. I receive emails but cannot send. I've verified the account settings numerous times and the verifications always work. But I still get the "Unable to send mail" message. Initially I thought it was the port but I've tried both 25 and 587. Neither work. I know I've sent messages before but it's been a while. Anyone have any ideas?

    I tried SSL with 25 and 587 (Verizon recommendation). Still no go.
    BTW, there isn't any way to save the Mail size limit and Download options is there. Every time I go thru this I have to go back and set these up again.
    Thanks again for your help.

  • Unable to send mails from Azure SharePoint 2010 VM

    Hello All,
    I have created Site-to-Site VPN in azure to my on premise, and i have configured SharePoint 2010 environment in that. Then i have configured outgoing mail settings for a web application in that VM, but i am unable to send mails to external domain from it.
    But i am able to send mails from my on premise VMs to external domains. 
    Thanks

    Hey There,
    Azure does not support smtp relay, you may want to use SendGrid (which working with Microsoft Azure).
    After registration you get 400 E-mail per day free of charge.
    From technical aspects youll get SMTP server, Username & Password which you can fill in your application.
    Hope it helps.
    Ido

  • [nQSError:75006] Unable to send MAIL Command.5.7.1 Client was not authentic

    Hi,
    We have configured SMTP server details in OBIEE 11g OEM to send mail from Agent. When we run Agents, we are getting the error
    [nQSError:75006] Unable to send MAIL Command.5.7.1 Client was not authenticated
    Did anyone face the issue? In that Case, Please give some inputs on that.

    Hi Satya,
    I would like to few more which I have done today.
    I wanted to test telnet SMTP on the OBIEE Installed Machine and I was able to succeed also. Please find below what I did
    C:\>telnet mail.smtp.com 25
    220 internal.mail.smtp.com Microsoft ESMTP MAIL Service Readt at Fri,
    25 May 2012 00:51:00 -0400
    ehlo
    250-internal.mail.smtp.com Hello [162.44.76.47]
    250-SIZE
    250-PIPELINING
    250-DSN
    250-ENHANCEDSTATUSCODES
    250-X-ANONYMOUSTLS
    250-AUTH NTLM LOGIN
    250-X-EXPS GSSAPI NILM
    250-8BITMIME
    250-BINARYMIME
    250-CHUNKING
    250-XEXCH50
    250 XRDST
    AUTH LOGIN
    334 VXN1cm5hbWU6
    Uy5SY-------------- Mail User Name
    334 UGFzc3dvcmWU6
    U2hfpd------------- Mail Password
    235 2.7.0 Authentication Successful
    mail from:[email protected]
    250 2.1.0 Sender OK
    rcpt to:[email protected]
    250 2.1.5 Recipient OK
    data
    354 start mail input; end with <CRLF>.<CRLF>
    This is a Test Mail
    250 2.6.0 <internal.mail.smtp.com>
    Queue Mail for Delivery
    Mail Received in Inbox
    So, My Question is that, I am able to receive the Mail if I directly access SMTP via Telnet then , Why it is not working in OBIEE and it throws error
    [nQSError:75006] Failed to send MAIL Command.5.7.1 Client was not authenticated
    Please help on resolving the issue?

  • Cant send mail to outside domain

    HI,
    I've developed a program to send a mail. The program works fine in development & quality systems. However in production system the program fails to send mail to any recipient which is in outside domain. The program sends mail to user which is in my company's domain. Can any one please help.
    The program was working fine till last month , however it has stopped sending mails to outside domain now.
    Bye

    Hi mac,
    There is one setting in transaction SCOT (Basis people will be able to help you).
    There we can specifiy the domains. Generally it is *. But it can be restricted. This may be causing the issue.
    Regards,
    Amit Mittal.

  • HT1277 i can receive mail but unable to send mail

    i can receive mail but unable to send mail

    I'm yet another person who upgraded to Maverick OSX. I'm now thinking, "BIG mistake". Mail was working perfectly. Then, last night, Mail stopped sending.
    I've checked everything. Comcast servers are set up correctly. Mail works fine on my ipad, but will not send. It gives me a SMPT error of "Cannot send message using the server comcast.net--authentication rejected" Comcast.net (Offline). I can not get it back online. I've also tried the fixes here, but there is no info.plist by those names in my library!
    Anyone have any other ideas how to get this working again? Apple's OS's have been pretty decently stable in the past. I had no thought that the upgrade would be so problematic. Live and Learn.
    Thanks for any suggestions.
    -Rachel

  • Mailx command unable to send mail to internal email server

    Hi,
    I am trying to send mail from my shell program registered as concurrent request in R12 its working fine for external server like (gmail,yahoo,hotmail etc) but when Im trying to send mail to internal mail within organization it fails. It does'nt error out though. Our dba has been working on the same but no luck. Any inputs will be of great help.
    echo "Mail"|mailx -s "Test Mail from DEV" "[email protected]" ( fails within internal domain)
    echo "Mail"|mailx -s "Test Mail from DEV" "[email protected]" ( successfully sends mail within external domain)
    I tried disabling the dns resolution for public sites in the configuration file (/etc/resolve.conf) but no luck. Thanks in advance.
    Thanks,
    Ahmed

    Thanks Koushik for your prompt reply. You mean the configuration file /etc/resolve.conf right? Here you go. If I comment all the below lines the mail does not work even for external sites as well.
    -----------------------------------------------------------------------resolve.conf-------------------------------------------------------------------------------------------------
    search companymaildomain.com
    nameserver aa.aa.aaa.a
    nameserver bbb.bb.bb.b
    Here first line has the company domain
    second and third line is the ip address of primary and secondary dns server
    Thanks,
    Ahmed

  • Notification mailer is not able to send mails to Outside domain i.e gmail

    Hi All,
    We are in 12.1.3 EBS application with 11.1.0.7 DB on Aix 64 bit platform:
    resently we configured notification mailer with out any issues
    But the issue is notifications are delivered to with in the domain itself but not to outside the domain i.e gmail and yahoo
    SMTP server host name is owa.craftsmanautomation.com the same we used to configure the Notification mailer
    Even we verified from os level using telnet utility as follows:
    $ telnet owa.craftsmanautomation.com 25
    Trying...
    Connected to 192.168.5.8.
    Escape character is '^]'.
    220 Capl-cas01.CRAFTSMAN.LOCAL Microsoft ESMTP MAIL Service ready at Thu, 12 Jul 2012 14:03:47 +0530
    EHLO CAPL-PROD
    250-Capl-cas01.CRAFTSMAN.LOCAL Hello [192.168.5.12]
    250-SIZE
    250-PIPELINING
    250-DSN
    250-ENHANCEDSTATUSCODES
    250-STARTTLS
    250-X-ANONYMOUSTLS
    250-AUTH NTLM
    250-X-EXPS GSSAPI NTLM
    250-8BITMIME
    250-BINARYMIME
    250-CHUNKING
    250-XEXCH50
    250-XRDST
    250 XSHADOW
    MAIL FROM: [email protected]
    250 2.1.0 Sender OK
    RCPT TO: [email protected]
    250 2.1.5 Recipient OK
    DATA
    354 Start mail input; end with <CRLF>.<CRLF>
    Subject: Test message
    Test message body
    250 2.6.0 <[email protected]> [InternalId=85753] Queued mail for delivery
    quit
    221 2.0.0 Service closing transmission channel
    Connection closed.
    In the above command in place of FROM and TO mail-id's if we use any personal mail-id's getting error message as "Unable to Relay".Please suggest is there any changes we need to done at SMTP server Level or OS level or Application Level.
    Thanks in Advance

    925263 wrote:
    Hi Hussein,
    Thanks Alot for your reply.
    Currently we changed the SMTP Server(mail.craftsmanautomation.com).we used anoth SMTP server to configure Notification Mailer.Because previous one(owa.craftsmanautomation.com) is not able to send mail's to outside domains.
    But in this case we got the below error message while testing.Below error message we captured from the output file of the script Oracle Workflow ATG Support: R12 Java Mailer Setup Diagnostic Test.
    ERROR
    [Nov 10, 2012 1:32:45 PM GMT+05:30]:1352534565017:-1:-1:capl-prod.craftsmanautomation.com:192.168.5.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[outboundThreadGroup1,5,outboundThreadGroup]:192.168.5.13:84096:1352529863628:11:ERROR:[SVC-GSM-WFMLRSVC-110812-10006 : oracle.apps.fnd.wf.mailer.SMTPOutboundProcessor.send(Message)]:Problem encountered when sending to {[[WFTEST <[email protected]>]]} -> javax.mail.SendFailedException: Invalid Addresses;
    nested exception is:
    class javax.mail.SendFailedException: 554 5.7.1 <[email protected]>: Sender address rejected: Access denied
    Please see these docs.
    Email Not Received javax.mail.SendFailedException: Invalid Addresses [ID 876835.1]
    Workflow Notification Mailer Unable to Send E-Mail Notifications [ID 374804.1]
    Unable to Email Proposal Documents to an 'External Address' [ID 1126223.1]
    How to address Email Center: Outbox Processor Error: Invalid Addresses [ID 1399427.1]
    Thanks,
    Hussein

Maybe you are looking for