Main Changes from CRM 6.0 ?.

Hi All,
Can somebody breif me about the main Functional/Technical/Architectural Changes/Upgrades from CRM 6.0 to CRM 7.0.
Thanks, Sudeep..

hi,
u can read this lik.. the article has many informative links about CRM 7.0
http://forum.saug.com.au/forums/t/32.aspx
Regards
shikha
Edited by: Shikha Rawal on Jun 10, 2009 1:44 PM

Similar Messages

BP Changes From CRM to R/3

Hi everyone,
We performed an initial download from R/3 to CRM.
Delta changes are working fine. Changes in R/3 are coming to CRM.
Our problem: we don't want any changes to be transferred from CRM to R/3, which sometimes cause inconsistencies.
How can I stop that?
We have the same situation in materials so please advise also for materials.
Thanks in advance.

Hi Nigne,
The solution in case of BP only:
Changes from R/3 to CRM will take place if you tick "Transfer to ERP".
Do not tick the same, and data will not flow from CRM to R/3.
Also check your middleware settings.
Regards,
Anirban

Delta Changes from CRM to ERP

Middleware gurus,
Our delta changes with the BPs from CRM to ECC are generating a "Message type is unknown". Has anyone ever seen this? It works fine from ECC to CRM. We're on CRM 5.0 and ECC 5.0.
Does anyone have any clue???

Hi,
Please check the Master Data Syncronization settings under ERP->SPRO->Cross Application Components->BP-> Master Data Syncronization.
You need to define the required BP Role, Groups and map accordingly to Account groups. Since you are facing problem with CRM-> ERP, you need to check the settings for CRM->ERP only.
I hope this helps.

User exit transfer SO changes from CRM to R3

Dear All,
I want to add enhancement by using user exit to do item changes check and to change order delivery block when Sales Order changes are transferred from CRM to R/3.
According to SAP docs, the user exit is CRM_GENERIC_R3_IN , but there is no further documentation on how to insert the modification .
Could anyone provide me a sample of this enhancement ? Or is there another way to do this ?
Thank you before,
TS Winedya

Dear Friend,
What type of exit is this?Is it a FM or BADI or any subroutine?

Delta changes from CRM 4.0 to CRM 5.0

Hai guys,
I got the documentation regarding the CRM 5.0 from the service.sap.
Is there a way that I can get the Delta changes wrt to midldeware,ISA etc from 4.0 to 5.0,
It would be glad if any of you guys can share the info
Thanks in Advance
Krishna

You want to read the "Release Notes" documents. These are the documents that contain all delta changes between various versions of SAP modules. Here is the link for CRM 4.0 ot 5.0 release notes (also on Service marketplace):
https://websmp108.sap-ag.de/~sapdownload/011000358700003919532006E/RN_CRM_50_07_en.pdf
In the future, when looking for deltas, just remember the term "release notes"
Hope that helps,
Rahul
PS. Please award points if it helped. And if it answered your question, please mark it as such, to keep the forum clean and help others too! Thank you!

Middleware debug problem for BP's from CRM to ECC

I tried few steps to debug BP changes from CRM to ECC but nothing is working ...
I deregistered the Queue thru SMQS, made changes to BP.. went SMQ1 select the Queue name Double Click 2 times.. then select the Tool bar (Debug LUW).. I'm getting "Nothing was selected"
When is see SMW01, BDOC is processed green and data is transferred to ECC.
I want to do debug the BP queue and go to ECC system as some of my custom EEWB fields are not passing to ECC correctly.
Any help is highly appreciated.
Thank you.

Hi,
Put a break point in FM SMW3_MFLOW_UPDATETASKBDOC.
Create a BP and before save type /h to activate debug, mark update debugging option.
When stops in FM SMW3_MFLOW_UPDATETASKBDOC you must be sure to set header-dbgmode = 'X' this will make the bdoc stay stopped in SMW01.
Go to SMW01 and type /h and process the bdoc.
Put a break in FM CRM_UPLOAD_AFTER_MAP_HANDLER and be sure to change LV_SYNCHRON = 'X' this will allow you to connect in ECC.
Put a break-point in the "CALL TRANSACTION" command. Change the mode of call transaction and you be able to debug XD* update.
Best Regards,
Caíque Escaler

How to generate a report from crm table to find out user status changes

Dear all,
Could you please help me on generating a report from SAP CRM table level
to find out user status changes in crm orders for a specific period of time?
Thanks in advance,
Regards,
Shaik

Hi Shaik.
You would not need to write report for this. You need to create a Table view mainenance for the CRMD_ORDERADM_H or CRMD_ORDERADM_I for whichever you need.
Follow the below or search on google for more on table view maintenance.
Go to SE11, give the table name and click on change. Then Go to utilities--> Table maintenance generator.
In the table maintenance generator screen, you should give Authorization Group,
Function Group name (Function Group name can be same as table name),
Maintenance type can be one step or two step, usually you will create with one
step. You should give maintenance screen number. After clicking on create button,
a table maintenance generator will be created.
To check it go to SM30 . In SM30, you find display, Maintain options.
You can view the table contents by choosing Display and supplying the selection criteria of dates.
Regards
Apoorva

Want to change ACCOUNT GROUP to BP from CRM to ECC

Hi All,
We would like to change the Account group of our (Inside/Outside sales persons) when they are replicating from CRM to ECC. We did change the PIDE setting according to our requirement but surprisingly 10-12 BPs are not getting changed. We opened an OSS and they suggested to write a Z function module and
registering it in the table CRMC_BUT_CALL_FU for the CRM OUTBOUND which HARDCODES the CLASSIFICATION DATA to the BP in accordance with the PIDE settings so as to get the ACCOUNT GROUP for these BPs.
I checkede the tcode CRMC_BUT_CALL_FU for the CRM OUTBOUND where we need to place our own FM. I know to write a FM, but not quite sure how to start. Can anyone out there please help me with this.
Any suggestions are highly appreciated.
Thanks,
Karuna.

I was able to change the account status from EXPIRE(GRACE) to OPEN. The trick as you hint at is to create a temporary profile, assign that profile to the account in question, saving the password from dba_users first, changing the password, logging in with the new password, then alter the user assigning back the original password with the identified by values clause in the later user statement and lastly assigning the original profile, either DEFAULT or custom.
Here is the temp profile I used which used values less than 1 for the critical limits involved here. Cannot have limit values less than 1 in 9i according to Oracle but you can in 10g.
CREATE PROFILE "TEMP_PROFILE" LIMIT CPU_PER_SESSION DEFAULT
CPU_PER_CALL DEFAULT
CONNECT_TIME DEFAULT
IDLE_TIME 15
SESSIONS_PER_USER DEFAULT
LOGICAL_READS_PER_SESSION DEFAULT
LOGICAL_READS_PER_CALL DEFAULT
PRIVATE_SGA DEFAULT
COMPOSITE_LIMIT DEFAULT
PASSWORD_LIFE_TIME .0001
PASSWORD_GRACE_TIME 5
PASSWORD_REUSE_MAX 1
PASSWORD_REUSE_TIME .0001
PASSWORD_LOCK_TIME .0103
FAILED_LOGIN_ATTEMPTS 3
PASSWORD_VERIFY_FUNCTION DEFAULT;
Thanks for your help.

Change a state in main.mxml from a script in another mxml

Hi,
i'm having some trouble with my application, let's say i have the main application file called MAIN.MXML
in wich i have set different States, and have different forms.
now i have a form called loginForm which contains the textInput item for Login and Password, i also have a link Need to Register
which onClick will change the state to show in the same panel a different form registerForm (with the relevant textInput items)
now the MAIN.MXML includes a custom component called <comp: NetworkManager /> which includes all the logic scripts and MXML
tags to create and manage an HTTPService request to a PHP Server.
when the user click on the Login button, this will call a function included in the main.as script (imported in MAIN.MXML) which
will call a function in the script within NetworkManager.MXML passing all the form data.
in NetworkManager.MXML the script will create an XML message, will send to the PHP Server and wait the response... if this comes
true the user is authenticated, otherwise is not.
so far so good, i get the message sent, the correct response back. Now i want to hide the form in MAIN.MXML and put something like
Welcome firstName lastName!! instead. But i don't know how to do it. If i try to access the states in MAIN.MXML from the NetworkManager.MXML
i'll get all sort of errors which i don't have it here with me.
I know this sounds like a newbie question, and it really is ... any taker?
your help is much appreciated.
thanks
T.

Hi,
i've tried RemoveChild but i get an error like:
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
at flash.display::DisplayObjectContainer/removeChild()
at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::$removeChild()[C:\autobuild\3.2.0\frameworks\p rojects\framework\src\mx\core\UIComponent.as:5096]
at mx.core::Container/removeChild()[C:\autobuild\3.2.0\frameworks\projects\framework\src\mx\ core\Container.as:2274]
at components::NetworkManager/sendUserAuthHandler()[C:\Documents and Settings\Tom\My Documents\flex_prj\Shoppy\src\components\NetworkManager.mxml:182]
at components::NetworkManager/serverHandler()[C:\Documents and Settings\Tom\My Documents\flex_prj\Shoppy\src\components\NetworkManager.mxml:98]
at components::NetworkManager/__serverRPC_result()[C:\Documents and Settings\Tom\My Documents\flex_prj\Shoppy\src\components\NetworkManager.mxml:290]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.rpc.http.mxml::HTTPService/http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()[C:\autobuild\3.2.0\framewor ks\projects\rpc\src\mx\rpc\http\mxml\HTTPService.as:290]
at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::resultHandler()[C:\autobuild\3.2.0\frameworks\ projects\rpc\src\mx\rpc\AbstractInvoker.as:193]
at mx.rpc::Responder/result()[C:\autobuild\3.2.0\frameworks\projects\rpc\src\mx\rpc\Responde r.as:43]
at mx.rpc::AsyncRequest/acknowledge()[C:\autobuild\3.2.0\frameworks\projects\rpc\src\mx\rpc\ AsyncRequest.as:74]
at DirectHTTPMessageResponder/completeHandler()[C:\autobuild\3.2.0\frameworks\projects\rpc\s rc\mx\messaging\channels\DirectHTTPChannel.as:403]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
who is the caller of loginForm then? i've tried with Application.application.loginForm but i do get the same error though.
loginForm is contained in a Canvas item, is it the caller? or who else?
thanks
T.

Problem in delta changes from ECC to CRM for Customers created in CRM systm

Dear all,
I am replicating customers between CRM and ECC and vice versa. The Delta changes are replicating from CRM to ECC system, but not happening from ECC to CRM system.
I have created some customers in CRM system and changed some address data, those changes are perfectly updating in back end ECC system.
But when I make some changes for the same customer from ECC system, those changes are not updating back in the CRM system.
I could not get the problem where exactly is coming. I request your expertise to help me in resolving this issue. I believe all middleware and pide settings are correct.
Your suggestions are highly appreciated.
Best regards
Raghu ram

Hi Shanthala,
Thank you very much for your prompt response, I have checked Customer_main adapter object in R3AC1, no filter has been found there.
and in R3 table TBE31, I could not find entry for CRS_CUSTOMER_COLLECT_DATA for APPLK = BC-MID.
As well in CRMRFCPAR table I could see X assigned to field named with 'In Queue Flag', but I could not find DISCARDDAT for CRM (User) settings.
Kinldy help me to resolve the issue.
Your suggestions will be highly appreciated.
Best regards
Raghu ram

Pricing procedure changes from R/3 to CRM

Hi gurus,
We want to change the pricing procedures in r/3 which involves changes to "From" and "to" calculation and as the same pricing procedures are being used in CRM, how do we synchronise the same,
Does system automatically replicate the changes ?
We have to manually make the changes in CRM for the same ?
Looking for valuable advise and suggestions gurus,
Thanks in advance,
Kind regards,
Gopio.

Hello Gopio
It is quite a while since I worked on a CRM project. These are basically middleware transactions which you use to transfer Customizing, Master and Transactional data from R/3 to CRM. Banking on my memory, here is the answer:
Menu Path: While in SAP Easy Access screen, choose Architecture and Technology/ Middleware ® Data Exchange ® Initial Load ® Start.
T code: R3AS.
Then you have to monitor the status of the transfer and check if the transfer is complete by using
Menu Path: Architecture and Technology/ Middleware/Monitoring , Data Exchange/ Monitor Objects or T code R3AM1.
Finally use tcode SLG1 ( options: object: COND_EXCHANGE, subobject: CUSTOMIZING), to display a log for the data transfer.
Hope this helps.

Changing documents downloaded from CRM into ECC, in ECC

Hi
Our requirement is to change documents downloaded from CRM into ECC, in ECC. I was refering to note 541113, but it is not of much use as we are using CRM 5.0. Also parameter that it says should be set I have set but ...obviously it didin't work. Please tell me what setting needs to be done for CRM 5.0 & ECC 6.0 so that our requirement is satisfied. I have searched SAP notes, without much success.
Thanx in advance.
Cheers
Hits

Hi,
This is very simple.
SAP has provided us with a new Scenario. this is called Scenario A.
This scenario can be made Transaction Type specific.
You need to maintain table SMOFPARSFA in CRM and CRMPAROLTP in R3.
SMOFPARSFA:
Key = R3A_SALES
ParamName = INT_CHANGE_ORDER
ParamName2 = <Transaction Type>
ParamValue = A
CRMPAROLTP:
ParameterName: CRM_SCENARIO
ParameterName 2: INT_CHANGE_ORDER
ParameterName 3: <sales document type>, for example TR
ParameterValue 1: A
Just do these settings and check. This must work
Sharif

BI process has gotten stuck and the data from CRM hasn't gotten updated

hai friends am working for BI in CRM....
BI process has gotten stuck and the data from CRM hasn't gotten updated in the BI cubes.
can any one help me to solve this issue???
WHAT MAY BE THE PROBLEM AND WHAT WILL BE THE SOLUTION???
IS THERE I NEED TO RESTART THE PROCESS CHAINS OR WHAT?

Is it already scheduled for a daily run or manually you are running the process chain?
If its manually running then you can select your process chain, and then right click on the start process --> Maintain variant --> Scheduling --> in the scheduler screen , you can click on the Immediate, save the changes and save in the next screen, once it comes back in the main screen, you have a scheduling Icon (Clock idoc). Click on it. Once done then it will be oK.
Or firs the process only failed, then you can right click on the failed process and then choose "Repeat" option to repeat the process.
Also you can check the source system connection is fine or not? RSa1 --> Source system --> CHECK
Edited by: Murali M on Sep 2, 2010 6:37 AM

BDOC from CRM to ISU

Hey Experts,
I want to know how the replication take places from BDOC from CRM to object creation / change in IS-U ( I know only little bit of MDT)
eg. BDOC gets created for contract in CRM then using MDT the contract and intallation fact is created in ISU, how is the data from BDOC converted using MDT (Master Data Template) to Contract / installation fact. where in ISU it is defined.
I can check the log in the BDOC as to what was sent but where do i check the log for what was recieved by the MDT what was processed converted and how it was updated to contract / installation fact. if there are errors then i know i can check in ECRMREPL
but if something is missing how do i check that.
I want to understand the total flow, the main issue currently i faced is that the contact details i can see in BDOC in CRM and it is showing succesful there is no error in ECRMREPL but date is not updated in ISU
regds
Santosh

Hi, Rohit,
We just encountered a problem in mIddleware .
When we use R3AR4 to start a request in CRM, the corresponding queue in the system ISU will be stopped automatically ,
after the process in CRM finished , the the queue will be released automatically , this is the typical scene.
But when we request a kind of object using R3AR4, the corresponding queue stopped in ISU hadn't released automatically
although all the data request had processed and no errors occured in SMW01 . so i want to trace the process and try to find somthing that may help .
Edited by: xia chen on Nov 19, 2010 12:58 AM
Edited by: xia chen on Nov 19, 2010 1:01 AM

Issue on payroll area which is changing from biweekly to monthly in Mid of

Dear Experts,
I have an issue on payroll area which is changing from biweekly to monthly in Mid of the Month.
One employee was retired on 29th of March, so his payroll area was changed from biweekly to monthly on 29th. For retire we are running the payroll on 8th of every month. When we are running payroll for April he has received only 29th and 30th retire salary, by the time he is not yet retired also.
In this case the main problem is monthly payroll time is early then biweekly. so the employee is getting retire salary then his regular pay.
Can you guide me where we can control that monthly payroll area should not be triggered at this movement.
Thanks
Chandra

You can do that but it is not that easy as it sounds if you have to do that over a period of say 10-20 years...lot of operational work!!
Also say if you load the retiree action one month ahead say on 03/01/2011. And the employee is retiring on 03/29.
Retire payroll is on 04/08
Biweekly is on 04/15
Now you decide to lock the employees after the 1st biweekly check of March...say which was process 14 days before 04/15 would be 04/01. The employee number is locked between 04/01 to 04/15. For 14 days you have locked these employees!!
What happens if there is adjustment pay...you have to manually go and unlock the employee and lock him after the adjustment check.
I will let you decide based on the comfort, SAP effort, Operational effort and system maintenance.

Main Changes from CRM 6.0 ?.

Similar Messages

Maybe you are looking for