Main layout setting problem

Dear all
I tried to reset the main layout width 20-40 after source field to be '*'
what should i do ?
thanks a lot
Edited by: user11156736 on 2011/9/19 下午 7:54

i knew it

Similar Messages

Layout Set Strange Problem

HI all
I have created new Layout Set - advanced copy of ConsumerExplorer- with some changes. This layout set is assigned to KM Navigation iView and as a Search Results Layout Set.
In this layout set in KM_ConsumerCollectionRenderer, in Displayed Properties we have put some custom properties. Some of the properties are of type String and other are of type Date.
When we see the docs in KM Navigation iView only properties having String type are getting displayed. Properties of type Date are displayed as blank.
But when we search for the same document its all properties are displayed including of type Date.
I am wondering, I have used same Layout Set for KM Navigation and Search iviews, but KM Navigation has some problems.
Please reply immediately.

Hi,
Can you check by going to "presentation" in folder>details>settings>select profile> choose other layout. Under the "properties to show" tab you can click on the "add" button and choose the properties. Check the preview. By this we can check if there is any problem specific to the layout set you are using before.
Ramesh Kotagiri

Help!!! The problem about the layout set

I have created my own layoutset for the navigation and set it.Here is the question, I navigate from the iview for which i have created the layout set to a new page.there is a return link on the new iview,i click the link of return the Browser go back to the frist iview but the layoutset i have set is gone. When return from the iview how can i keep the layoutset .
Any one know the answer please tell me , thx

Hi Mike,
Thank you very much for your help. I think itis better to choose another kind of smart sensor with rs232 I/O port. It is easier to connect the eight sensors to the eight bluetooth servers. The eight sensors are fixed on the different bearing surfaces and rotate with the machine, it's difficult to use one turning adapter to connect them. So I have to use eight bluetooth servers to connect to the eight sensors.
The key problem ishould I use 8 bluetooth servers or 1 bluetooth server or the bluetooth vi of labview to receive the data from the other servers and how can I drive them. Just like question 3 and 4 following:
(3 key question) I skimmed through the forum and noticed labview can support bluetooth. But I want to know that: If the bluetooth function of labview 8 can receive the data from the eight bluetooth servers on the machine in the same time, how could I do? If not,
should I use the same kinds of eight bluetooth servers to receive the realtime data in the same time, which are connected to pc I/O ports(if they are enough), or just use only one server connected to pc to receive the data from the servers in the same time ?
(4 question) I noticed that the bluetooth servers should use drive software or programe. If necessary, how could I do for the eight servers on the machine and on the pc?

Layout Set not working

Hi all,
I am trying to fulfill a requirement here which is to hide the "Edit Header" control on the Banner iView. I found out that this is defined in the "Components" property in the HTML Collection Renderer Settings. When i omit the component on this property, the Banner iView hides the control. So far, so good.
Now, as i need 2 instances of the layout set (one with the component and other without) i did this:
1) Copied the layout set to a custom one
2) Copied the HTML Renderer to a custom one
3) Omitted the component on the custom HTML Renderer
4) Changed the renderer on the custom layout set to point to the new renderer
5) Copied the Banner iView and customized it on the property "Layout Setting", putting the name of the custom layout set.
And this won't work! When i use this iView, instead of showing the Banner and Title, it shows a KM navigation structure with the Images directory (base directory of Banners). Do you know what may be wrong? I am sure that the problem occurs when i change the iView property to point to the custom layout set. But what is wrong?

Hi all,
I've posted this yesterday and had no reply... can anyone help on this case? I've tried everything and nothing seems to work.
Thanks in advance!
Thiago

How to get a list of Layout Sets

Hi Experts,
How do I get a list of Layout sets in Portal ?
I am using a KM Navigation IView to show a list of External Links. I have used a copy of Links IView for this. The Layout set used here is "LinkListExplorer".
The problem with this layout set is it provides an option of Organize Entries to all End users. An end user might potentially delete a link or edit it due to this.
I want to get rid of Organize Entries feature in this IView, which I feel can be achieved only by changing Layout of the IVIew.
Please guide me to list of Layout sets or a way to maintain permissions for Links IView.
Thanks,
Yomesh.

System Administration -> System Configuration -> Knowledge Management -> Content Management
then,
User Interface -> Settings -> Layout Set
You will see lots of layouts sets that you can use...

Search result category with a custom layout set?

Greetings,
I've created a nice little search IVIEW with a custom search options set that will display the document category (taxonomy) in the search result (if the resulting document is categorized, of course.) Works great. However there is one little problem. The categories in the search results are hyperlinked and when you select one, you get a new window with the taxonomy rendered in the default layout set (the ConsumerExplorer I think.) Not good. I need this displayed in a custom layout set.
Any ideas how to make this hyperlink use a custom layout set without changing the default?
Regards,
Paul Federighi

Hi Paul,
As per my knowledge of the basic s of layout sets and iviews.
You want to change the layout set of the iview(window) which opens when u click the hyperlink.
You should do this:
1)Make a new layout set by customizing the default one.
2)If the iview opening is a standard iview then go to its properties and change the Layout set value to ur new layout.
Please revert in case of issues.
I hope it helps.
Regards,
Sumit

HP 8600 Officejet Pro stuck on layout setting of long-edge binding (duplex printing)

My HP 8600 Officejet Pro 8600 is stuck on a layout setting for printing of long-edge binding (duplex printing). It's conected to a mac running OSX 10.8.4 Any suggestions?
Thanks

Hi,
From the application used to print click on File and the select Print. The Print window appears.
NOTE: The Print window might be minimized. Click the blue triangle next to the printer name to see all available settings.
In the expanded Print window you will find next to Copies the checkbox for Two-Sided. Check the box.
NOTE: If the checkbox does not appear within the specific application print dialog, skip this step.
Click the lowest selection box listed as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
Select Layout from the drop-down menu.
6. Set the Two-Sided option as the required binding or select Off to disable it.
Click on Presets > Save Current Settings as Preset and perform the print job... the settings will remain default till another preset will be used.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Cannot change number of rows in layout set

I have created a layout set with a custom Collection Grid Renderer to show XML forms news items. I have changed the number of rows property to 3 to set the number of items to display to 3, but only one item is displayed.
I have changed this setting successfully before. Does anyone know why this is happening?
Thanks in advance!

Is there really nobody out there who faced this problem?
Please help!

SAP Script - calling SAP layout set from ABAP/4

Hi,
Help me in calling SAP layout set from ABAP/4
Thanks

Ashish,
create a driver program
create a script
A script is called using the function modules open_form,write_form,close_form.
Check this dummy program.
REPORT ZF3 .
tables makt.
data:begin of imakt occurs 0,
 matnr like makt-matnr,
 spras like makt-spras,
 maktx like makt-maktx,
 end of imakt.
DATA : ITEXT LIKE TLINE OCCURS 0 WITH HEADER LINE.
DATA : TEXTNAME LIKE STXH-TDNAME.
select matnr spras maktx from makt into table imakt up to 100 rows where
spras = sy-langu.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
DEVICE = 'PRINTER'
DIALOG = 'X'
 FORM = 'ZF3'
LANGUAGE = SY-LANGU
OPTIONS =
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
SPONUMIV =
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
CODEPAGE = 11
OTHERS = 12
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT IMAKT.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
 ELEMENT = 'MAIN'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
K.Kiran.

Search UI Layout Set

Hi,
I have configured a Search iView with my own Layout Set (advanced copy of SearchResultLayoutSet as XYZSearchResultLayoutSet). The search results successfully display using XYZSearchResultLayoutSet. I have a See Also link.
The problem is, when I click the See Also link, the new results do not display in the Layout Set that I created - XYZSearchResultLayoutSet. Can someone please help me understand why this happens.
One thing I tried was to change the Parameters under see_also command and put rndLayoutSet=XYZSearchResultLayoutSet.
Thank you,
Lakshmi.

Hi Sascha,
Why did you delete the message? Good thing I got an email. It solved my problem. Full points to you. Thank you!
For anyone else with the same problem, the link was:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/4ff640365d8566e10000000a1550b0/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/4ff640365d8566e10000000a1550b0/frameset.htm</a>

How to change a folder layout set using KM api?

Hello,
I'm developing a program using KM api that creates different folders with properties, permissions, ... I want to use a different layout set depending on the folder that i am browsing, but these folders are created dinamically, so I cant set a different layouts set for each one manually (Details > Display > ...).
Does anybody know how I could do it using KM api? I mean, that every time I create a folder using KM api I should assaing dinamically the default layout set for this folder. I searched in the api and examples and I didn't find anything.
Thanks in advance and best regards,
JC

Hi all,
Problem solved... I decompiled standard code and I did what SAP do when they want to change a folder layout set:
IResourceContext context = ResourceFactory.getInstance().getServiceContext("cmadmin_service");
com.sapportals.portal.security.usermanagement.IUser puser = context.getUser();
ICollection collection = (ICollection)ResourceFactory.getInstance().getResource(RID.getRID("folder_path"),context);
IRepositoryServiceFactory factory = ResourceFactory.getInstance().getServiceFactory();
ILayoutService layoutService = (ILayoutService)factory.getRepositoryService(collection, "LayoutRepositoryService");
ILayoutContext userContext = layoutService.getContextForUser(puser, "");
ContextProperties commonProperties = new ContextProperties(layoutService, collection, userContext.getAnonymousContext(), layoutService.getProfiles(), new HashMap());
commonProperties.initFromPersistence();
commonProperties.setSelectedProfileID("LayoutSetProfile");
commonProperties.setSelectedLayoutsetID("ID_of_my_layout_set");
ArrayList errormsg = new ArrayList();
commonProperties.save(null, errormsg, false);
Thanks and regards,
jc!

Layout Set : Show Folder Content

How can i show the contents of folder in main page if i use AdminExplorer or ConsumerTreeList layout set.
What i am looking is to display the content in the main page rather than clicking on folder link which takes to next page with contents.
For e.g
Folder A                  Size   Modified Modifiedby
    Document1              30KB 1-mar-06 user1
    Document2              30KB 1-mar-06 user1
Folder B
    Document1              30KB 1-mar-06 user1
    Document2              30KB 1-mar-06 user1
I appreciate any suggestions or ideas.
Thanks
Tegala

Hi,
Prakash Singh has provided a ready to use code to have KM repository custom views. you can make modificationd to meet your requirement.
refer:
Build Your Own KM Navigation iView Using HTMLB Tree
Hope that helps.
Regards,
S.Divakar

QM layout set QM_QCERT_01 for certificate profile

Experts,
I'm creating a certificate profile in QC01 and I want to assign form QM_QCERT_01 as a layout set. It's the standard SAP form for the quality certificate.
But I get the error message: "Text QM_QCERT_OFF_SPEC_TEXT not available for layout set QM_QCERT_01" (Message no QC 094).
Diagnosis: In the form QM_QCERT_01, a reference exists to text QM_QCERT_INSPECTION_METHOD (text ID ST, language EN). However, this text is not available in the current client. This may be due to one of the following reasons:
    o The text is only available in the original client.
    o The text is not available in either the original or the current client and should therefore be created.
System Response: The text cannot be evaluated while the certificate is being created. Information and logical queries could be lost for this reason.
Procedure: Check your entries in form QM_QCERT_01. If required, create the text QM_QCERT_INSPECTION_METHOD.
If the text is only available in the original SAP client, copy it in all languages (if necessary) from the original client to the current client. To do this select Tools -> SAPscript -> Standard text -> Utilities -> Copy from client.
How do I check if the text is available in the current client? How do I add or create the missing text?
Thanks. Rgds

If you are not sure then you can copy the std form and text in SPRO>QM->basic settings>
Transfer QM Standard Texts
Transfer QM Forms.
hence from 000 client this will be copied and then you can check it once again..if still problem persistis then it is sure that it is not available in std sytsme and you need to talk to ABAPer to cretae a text element QM_QCERT_OFF_SPEC_TEXT .
This may be created in your client and assigned to layout...just check

Missing layout set?

Hi you all!
I have a problem that migth be caused by a missing layout set. The problem is that I know more or less nothing about these.
I have a role with a set of pages as an entrypoint and under this there are som more sets of pages and among these sets is of course another entrypoint. This one holds four pages which are shown in the detailed navigation. Nothing strange up to here but now to my problem: when I click a certain one of these four "links" in the det.nav. nothing at all is shown. It just happens to this very page and not to the other three.
I have opened the role in question in our dev-portal where the page works and have made comparisons to the prod-portal but can't find any differenses. Can anyone tip me of about where to find the layout set which will affect the level in question in the structure described? The only place where I can find this attribute is at the settings of an iView on the page that errors and this iView isn't even shown. The name of it is "Site Files Master Iview" if it's a standard one and if it's of help to the solution.
Best regards
Benny Lange

Hi Benny,
it depends on the version if you can find the default.trc in the portal
I am not totally sure, when things changed. You can have a look at 'SystemAdministration -> Support -> Support Desk -> PortalRuntime'. Here you can mybe find a Logviewer. Or you could try to use your Portal-URL without the 'irj', then click on 'SAP Netweaver Administrtator'. Then choose 'analysis -> debug -> logs and traces'. In the DropDown-Box 'Select View' choose 'default Trace'
On the file-system you should be able to find the log here: \usr\sap\<SID>\JC00\j2ee\cluster\server0\log.
Reproduce the error and make sure that you are looking in the newest defaultTrace
Hope this helps
Karin

Customizing parent folder link options in DiscussionForum Layout set

Hi All,
I have created a forum page with discussionForum layout set.Now, it shows the discussion groups inside it with parent folder link at the top.this parent folder link has some options like view,coolaboration,details etc which I need to customize...
By parent folder I mean like if A has x,y,z discussion groups:
If you click on x then, parent folder link changes to:
A-->x...there is a option menu just besides this link which I need to customize.
Can anyone give a clear idea to this problem??
With Regards,
Udit

Hi Udit,
Pls follow the below steps,
1. Go to sys admin> sys configuration> Knowledgemanagement --> content management -- >user interface.> settings> layout set
2. Search for Discussion layout set and open it.
3. In Collection renderer field, click on the link discussion group bread crumb
4. In the subsequent window, click on the collection command group : discussiongroupbreadcrumbcommandgroup.
5.in the next window, edit the command list field as per your requirement and save.
Pls reward for helpful answer.
Rgds,
Siva

Main layout setting problem

Similar Messages

Maybe you are looking for