Main Menu works in FF + IE7, but not IE6... why?

These main navigation buttons work fine in FF and IE7, but
according to a
friend of mine still running IE6, they don't seem to work in
IE6.
Could someone tell me why?
(This is strictly a CSS problem.)
http://www.vilverset.com/main.php
Suggested fix : Apparently, a quick fix would be to assign a
"_width:10px"
to the class that would make the boxes wrap tightly around
the content. When
I tried this, he said it fixed it. And since _width only
applies to IE, FF
is unaffected by it.
Would this be an appropriate fix?
Thanks!

Anyone? :-S
"Mike" <[email protected]> wrote in message
news:gqhl5n$62u$[email protected]..
> These main navigation buttons work fine in FF and IE7,
but according to a
> friend of mine still running IE6, they don't seem to
work in IE6.
>
> Could someone tell me why?
>
> (This is strictly a CSS problem.)
>
>
http://www.vilverset.com/main.php
>
> Suggested fix : Apparently, a quick fix would be to
assign a "_width:10px"
> to the class that would make the boxes wrap tightly
around the content.
> When I tried this, he said it fixed it. And since _width
only applies to
> IE, FF is unaffected by it.
>
> Would this be an appropriate fix?
>
> Thanks!

Similar Messages

Simple JS works in Acrobat 7, but not 8 - why?

I have a simple form with 2 fields: "myname" and "phone". "myname" is a drop down list populated with 3 names. I want to be able to populate the "phone" field with a phone number corresponding to the "myname" field automatically.
I have the following JS attached to the calculate event of the myname field. This works perfect in Acrobat 7.0.9, but does not work at all in Acrobat 8.0 professional or Adobe Reader 8. Does anyone know why?
switch (myname.rawValue){
case "Beth Voigt" :
phone.rawValue = "431-3833";
break;
case "Bobbie Hartfiel" :
phone.rawValue = "431-2019";
break;
case "Dave Brown" :
phone.rawValue = "431-2448";
break;
default : phone.rawValue = "";
event.newText = myname.rawValue;

I was just asking where those scripts are located.
You can configure Chrome to use Reader instead of its built-in viewer: http://blogs.adobe.com/vikrant/2010/12/use-adobe-plugins-to-view-pdfs-inside-google-chrome /

Embedding video, works on my computers but not theirs, why?

I have made a flyer that has an embedded video clip using Acrobat Pro 9 Extended. It opens and plays ok on Professional Extended and Reader on one computer, also opens ok on Professional (non extended) and Reader on another computer. I emailed the file to my client and he only has Reader. He tried it on his computer and some other computers with Reader and said he gets an error (see below) which comes up when he opens it and doesnt even show the PDF at all. He said he upgraded his Readers to the current version and still gets the error. What else could be causing this?

it only charge if itunes is installed on the computer
for some reason

HELP - CS5 - Site works in IE7 but not IE8 or Firefox?

Hope some one can help or pint me in the right direction as i am a complete beginner.
My webpage desplays perfectly in IE7 but not quite correctly in other browsers. Is there a bit of code i can add that will rectify this problem?
My html code is:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>BDC Intranet</title>
<link href="styles/check_cs5.css" rel="stylesheet" type="text/css" />
<style type="text/css">
body {
background-image: url();
</style>
</head>
<body>
<div id="outerWrapper">
<div id="container">
        <div id="header">
         <img src="images/logo.jpg" title="" alt="" class="logo" />
            <address>
            <p>Braintree District Council, Causeway House, Bocking End, CM7 9HB</p></address>
            <img src="images/email.jpg" title="" alt="" class="email" />
            <img src="images/bdclogo.jpg" title="" alt="" class="bdclogo" />
            <ul class="mainNavigation">
             <li><a href="index.html">- Home</a></li>
          <li><a href="http://bdcintiis/intranet/">/ Library</a></li>
                <li><a href="http://bdcintiis/Intranet/Library/">/ Directory</a></li>
                <li><a href="http://bdcintiis/Intranet/PeopleDirectory/">/ Forum</a></li>
                <li><a href="traffic.html">/ Traffic Report</a></li>
                <li><a href="http://bdcintiis/intranet/">/ Local Weather</a></li>
     <li><a href="http://braintree-cp01/directory/directory.php?sID=10e1ae435af25009f959623e823f4a62&search= 1&SearchStr=&Items=1">/ Contacts</a></li>
                <li><a href="http://bdcintiis/Intranet/Help/">/ Help</a></li>
                </ul>
            <h1>You are currently at the intranet homepage</h1>
        </div>
        <div id="column1">
<h2>Links</h2>
            <ul class="sideNavigation">
             <li><a href="index.html">- Home</a></li>
                <li><a href="http://bdcintiis/Intranet/Braintree-Colchester/">- BDC Working</a></li>
                <li><a href="http://bdcintiis/Intranet/Organisational+Development+and+Learning/">- BDC Learning</a></li>
                <li><a href="http://bdcintiis/Intranet/Social/">- BDC Social</a></li>
                <li><a href="http://bdcintiis/intranet/">- Departments</a></li>
                <li><a href="http://bdcintiis/intranet/">- Your Ideas</a></li>
                <li><a href="http://bdcintiis/intranet/">- BDC Calendar</a></li>
                <li><a href="http://bdcintiis/intranet/News/">- News & Events</a></li>
                <li><a href="http://bdcintiis/intranet/">- Current Issue</a></li>
            </ul>
              <div id="braintreeUpdate">
              <h5>Local News</h5>
              <br />
<script src="http://www.gmodules.com/ig/ifr?url=http://www.ajaxgaier.com/iGoogle/rss-reader%2B.xml& up_title=&up_feed=http%3A%2F%2Fwww.braintreeandwithamtimes.co.uk%2Fnews%2Fbraintree_ne ws%2Frss%2F&up_contentnr=19&up_fontsize=10&up_titlelink=&up_bullet=1&u p_reload_feed=0&synd=open&w=190&h=195&title=&border=%23ffffff%7C3px%2C 1px+solid+%23999999&output=js"></script>
        </div>
        <h5>Get in Touch</h5>
        <img src="images/getintouch.jpg" title="" alt+""/>
        </div>
      <div id="column2">
            <h1>Local News about Braintree District Council</h1>
            <h2>Police crack down on motoring offences - click here for more information</h2>
            <div id="pageBanner">
             <p>Police crack down on<br />motoring offences</p>
        </div>
            <div class="thumbContainer">
            <div class="thumb">
             <img src="images/shaping.jpg" title="" alt="" />
                <p>We have been trying to keep the momentum of the Shaping up for the Future conferences alive. click here</p>
            </div>
            <div class="thumb">
             <img src="images/cycle.jpg" title="" alt="" />
                <p>Serco are taking part in a charity bike ride, from London to Brighton. Click here for more information</p>
            </div>
            <div class="thumb">
             <img src="images/field.jpg" title="" alt="" />
                <p>A programme inspired by residents and will officially launch in June and run for two years. Click here</p>
            </div>
            </div>
<div id="notices">
        <h3>Latest BDC Notices and Events</h3>
          <p>- Solid pine bedroom furniture - Solid pine chunky rustic bedroom furniture with oiled finish - £150 ono - <a href="http://bdcintiis/Intranet/Notices/?ID=2271">Click here</a><br />
            - Toy Story Mania Wii Game + Ray Gun - Disneys Toy Story Mania Wii Game including the Ray Gun for it. £12 - <a href="http://bdcintiis/Intranet/Notices/?ID=2270">Click here</a><br />
            - For Sale: Ford Mondeo - 1995 Ford Mondeo (auto) 1.8 LX Taxed & MOT until Oct 2010 £250 - <a href="http://bdcintiis/Intranet/Notices/?ID=2269">Click here</a><br />
          - Bon Jovi tickets - 2 tickets for Bon Jovi at the O2 Sunday 20th June 2010 Block 107 on lower tier row E seats 226 and 227 £150 for the pair. - <a href="http://bdcintiis/Intranet/Notices/?ID=2311">Click here</a><br />
</div>
        </div>
<div id="column3">
            <h2>Links</h2>
            <ul class="rightNavigation">
            <li><a href="http://bdcintiis/Intranet/Login.htm">- Log into the Content Management System</a></li>
            <li><a href="http://bdcintiis/Intranet/Login.htm">- Open the live version of the BDC website</a></li>
            </ul>
      <h4>A to Z</h4>
            <p><img src="images/AtoZ.jpg" title="" alt+""/><br />
              <br />
            </p>
<h4>Local Weather Update</h4>
      <script src="http://www.gmodules.com/ig/ifr?url=http://hosting.gmodules.com/ig/gadgets/file/10916253967 9639397174/weather.xml&up_location=Braintree&up_scale=C&up_title=Braintree&amp ;up_icons=Google&synd=open&w=188&h=356&title=&border=%23ffffff%7C3px%2 C1px+solid+%23999999&output=js"></script>
      </div>
        <div id="footer">
        <h1>All of the pages on this website are the copyright © of Braintree District Council</h1>
        </div>
        <div class="advertContainer">
        <div class="advert">
         <img src="images/bottompics.jpg" title="" alt="" /> </div>
        </div>
    </div>
</div>
</body>
</html>
My CSS code is:
body   { font-size: 100%; font-family: Arial, Helvetica, sans-serif; background: #c0c0c0; margin: 0px; padding: 0px; }
#outerWrapper { width: 1000px; margin: 0 auto; }
#container { width: 980px; padding: 10px; margin: 0 auto; float: left; background: #fff; }
#header   { width: 980px; height: 150px; margin-bottom: 10px; position: relative; background: #595959; }
#column1 { float: left; width: 198px; margin-right: 10px; border: 1px solid #adc411; }
#column2 { float: left; width: 560px; }
#column3 { float: left; width: 198px; margin-left: 10px; border: 1px solid #adc411; }
#footer   { width: 980px; height: 35px; margin-bottom: 10px; margin-top: 10px; position: relative; background: #595959; }
#header img.logo      { position: absolute; top: 5px; left: 10px; }
#header img.bdclogo      { position: absolute; top: 5px; right: 5px; }
#header img.email      { position:absolute; top: 77px; right: 131px; }
#header ul.mainNavigation    { width: 980px; height: 20px; padding:0px; margin: 0px; background: #fff; position: absolute; bottom: 35px;    left: 0px; list-style: none; }
#header ul.mainNavigation li   { float: left; list-style: none; width: 120px; display: block; background: #fff; }
#header ul.mainNavigation li a   { display: block; color: #595959; text-decoration: none; font-weight: bold; line-height: 20px; text-align: center; font-size: 80% }
#header ul.mainNavigation li a:hover { }
#header h1        { color: #fefefe; margin: 0px; padding: 0px; position: absolute; bottom: 10px; left: 10px; font-size: 80%; }
#header address       { position: absolute; top: 63px; right: 10px; color: #fefefe; font-size: 75%; font-weight: bold; font-style: normal; }
#column1 h2,
#column3 h2        { background: #adc411; color: #fefefe; line-height: 20px; width: 188px; margin: 0px 0px 10px 0px; padding: 4px 5px; font-size: 95%; }
#notices        { float: left; height: 200px; width: 560px; margin-top: 10px; margin-right: 10px; border: 1px solid #adc411; font-size: 80%; }
#notices h3        { background: #595959; color: #fefefe; line-height: 20px; width: 550px; margin: 0px 0px 10px 0px; padding: 4px 5px; font-size: 110%; }
#column2 h1        { color: #adc411; margin: 0px; padding: 0px; font-size: 110%; font-weight: bold; }
#column2 h2        { color: #595959; margin: 0px; padding: 0px; font-size: 80%; }
#column2 #pageBanner     { width: 560px; height: 200px; position: relative; background: url(../images/police.jpg) no-repeat center; margin-bottom: 10px; margin-top: 10px; }
#column2 #pageBanner p     { color: #fefefe; font-weight: bold; position: absolute; bottom: 10px; left: 10px; }
#column1 ul        { float: left; list-style: none; padding: 0px; margin: 0px; }
#column1 ul li       { float: left; clear: both; padding: 4px 5px; list-style: none; }
#column1 ul li a      { display: block; text-decoration: none; color: #595959; font-weight: bold; font-size: 90%; }
#column1 ul li a:hover     { }
#column1 h5        { background: #595959; color: #fefefe; line-height: 20px; width: 188px; margin: 0px 0px 5px 0px; padding: 4px 5px; font-weight: bold; font-size: 80%; }
#column3 ul        { float: left; list-style: none; padding: 0px; margin: 0px; }
#column3 ul li       { float: left; clear: inherit; padding: 4px 5px; list-style: none; }
#column3 ul li a      { display: block; text-decoration: none; color: #595959; font-weight: bold; font-size: 90%; }
#column3 ul li a:hover     { }
#column3 h4        { background: #595959; color: #fefefe; line-height: 20px; width: 188px; margin: 0px 0px 5px 0px; padding: 4px 5px; font-weight: bold; font-size: 80%; }
.thumbContainer       { float: left; width: 570px; overflow: hidden; }
.thumb         { float: left; width: 170px; height: 190px; padding: 5px; margin-right: 10px; background: url(../images/backroundgreen.jpg) no-repeat; font-size: 75%; font-weight: bold; color: #fefefe; }
#footer h1        { color: #fefefe; margin: 0px; padding: 0px; position: absolute; bottom: 10px; left: 230px; font-size: 80%; }
.advertContainer      { float: left; width: 980px; height: 35px; overflow: hidden; }
.advert         { position: absolute; top: 890px; left: 330px; }

I know i am really sorry the page is only a mock up so i dont have a link i could send you.
If you have an email address i could email you the files as they are only small.
If it helps to understand i have 2 screen shots below of how it looks in IE7 & IE8.
Thank you very much for your help.
IE7
IE8 - The left and right green headings are not there and the bottam banner has moved up to the top?

[SOLVED] ADF skin CSS works properly in FF, IE7 but not in IE6

Hi
I have an ADF BC application written in jdev 10.1.3 that has a custom skin. The main pages in the app each have an af:menuBar with af:commandMenuItem items within it. The menubar is skinned to be transparent other than a top and bottom border while the af:commandMenuItems are skinned to be a particular colour with a hover colour.
This works great in Firefox and IE7 but in IE6 the af:commandMenuItems are the same colour as the menubar background. They are only visible on mouse hover (see screenshot linked)
http://i249.photobucket.com/albums/gg219/pschweig/ie6cssscreen2.jpg
I noticed that the css file used by the different browsers are different e.g. for firefox
B2B-desktop-10_1_3_3_0-en-gecko.css
and for IE6 B2B-desktop-10_1_3_3_0-en-ie-6-windows-s.css
Could there be some error in the IE6 css generated by ADF? Or is it an IE6 bug? Either way any info on how I can progress with this would be much appreciated.
thanks
paul schweiger

After working with support found that the following css selectors do the job in IE6
af|menuBar::selected-link{ background: none; color: #661047; }
af|menuBar::enabled-link{ background: none; color: #661047; }

HT4061 My phone can't turned on. I tried to press the home button and main button at the same time, but not working. what should I do?

Iphone 4s can't turned on, goes total black. Tried to press button and main button at the same time, but not working. what should I do?

recovery mode
open itunes on computer
plug cable into computer not iOS device
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808

When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.

When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.

Did you select View->Bcc Address Field from the menu bar?

Magic Mouse One-Finger Swipe Works for one user but not the other

For the main account on my iMac, I can use a single finger swipe to move back and forward within Chrome. However the second user (also an administrator) cannot use this setting and must instead use the two finger swipe in settings. Both settings are identical but the Chrome browser wont recognize the single finger swipe for the second user. The gesture works fine in Safari, but not Chrome. Any suggestions?

my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004:

My "places" in photos is working on my phone but not transferred to my iPad in Photo Stream even though the photos transfer. It used to work, so did I do something?

My "places" in photos is working on my phone but not transferred to my iPad in Photo Stream even though the photos transfer. It used to work, so did I do something?

OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

Isight works with photo booth but not in ichat or google talk or skype?

isight works with photo booth but not in ichat or google talk or skype?

Hi
Is this an Internal or External iSight ?
In iChat, in the Video Menu (This is to the right of Buddies and may read Audio) is Camera Enabled Ticked ?
If it reads Audio open the Connection Doctor from that same menu.
In the connection Doctor open the Capabilities tab
Does it say your Internet Connection is too slow ?
At this point I would need to know which iChat Version.
However also look in the View Menu.
Is Show VIdeo Status ticked ? (this shows green Icons next to your Buddy Pic and those of your Buddies
Next go to the iChat Menu > Preferences > Video Section
Do you see a preview here ?
Re: GoogleTalk
Have you enabled TALK on your Google Account Settings ?
You need to have a Google Mail ID (Not any other sort of Google ID)
Have you downloaded the Intel only Web Browser Plug-in to do Video in a Web Browser.
10:48 PM Tuesday; August 30, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Flex mobile 4.6 app works inside flash builder but not in android emulator

Originally posted on stackoverflow: http://stackoverflow.com/questions/8663892/flex-mobile-4-6-app-works-inside-flash-builder- but-not-in-android-emulator
I have a basic flex mobile 4.6 app and it works fully fine in the flash builder built-in emulator using an android device profile like aria...
It also launches fine in the android emulator but one particular view shows blank (and this view works fine in flash builder).
Before I get in to many details of the view are there any categorical gotchas that can be causing this?
I can't seem to get the trace statements from the app to show in 'adb logcat'. It seems I need to compile a debug version of the apk but I don't know how to do this. I use the 'Export Release Build' from the Project menu in flash builder and it doesn't seem to have an option for debug=true.
The problematic/blank view basically uses the stagewebview and iotashan's oauth library to call linkedin rest apis... A different (and working) view can make restful web service calls in the emulator fine, so it doesn't seem to be an internet permission.
The source code contained in the problematic/blank view is almost identical to the tutorial found at:http://www.riagora.com/2011/01/air-and-linkedin/
The differences are: a) The root tag is a View b) I use StageWebView instead of HtmlContainer c) I use my own linkedin key and tokens.
I would appreciate it if someone can provide me with some pointers on how to troubleshoot this situation. Perhaps someone can tell me how to debug the app while running in the emulator (I think I need the correct adt command arguments for this which matches the 'Export Release Build' menu but adds the debug param?)
Thanks for your help in advance.
Comment Added:
I suspect that this has to do with connections to https:// api.linkedin.com and https:// www.linkedin.com. The only reason I can think of that the same code is not having issues inside of Flex Builder but indeed having issues in the Android emulator is something to do with certificates. Any ideas?

Thanks er453r,
I have created a project that clearly reproduces the bug. Here are the steps:
1) Create a UrlLoader and point it to https://www.google.com (HTTPS is important because http works but HTTPS does not)
2) Load it
3) Run in Flash Builder 4.6/Air 3.1 and then run in Android emulator. The former works with an http status 200. The latter gives you an ioerror 2032. I am assuming what works in Flash Builder is supposed to work in the Android Emulator and what what works in the emulator is supposed to work in a physical device (plus or minus boundary conditions).
I see a certificate exception in adb logcat but not sure if it's related...
Here is the self contained View code which works with a TabbedViewNavigatorApplication:
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
                    xmlns:s="library://ns.adobe.com/flex/spark"
                    xmlns:mx="library://ns.adobe.com/flex/mx"
                    xmlns:ns1="*"
                    xmlns:local="*"
                    creationComplete="windowedapplication1_creationCompleteHandler(event) "
                    actionBarVisible="true" tabBarVisible="true">
          <fx:Script>
                    <![CDATA[
                              import mx.events.FlexEvent;
                              protected var requestTokenUrl:String = "https://www.google.com";
                              protected function windowedapplication1_creationCompleteHandler(event:FlexEvent):void
                                        var loader:URLLoader = new URLLoader();
                                        loader.addEventListener(ErrorEvent.ERROR, onError);
                                        loader.addEventListener(AsyncErrorEvent.ASYNC_ERROR, onAsyncError);
                                        loader.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
                                        loader.addEventListener(HTTPStatusEvent.HTTP_RESPONSE_STATUS, httpResponseStatusHandler);
                                        loader.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
                                        var urlRequest:URLRequest = new URLRequest(requestTokenUrl);
                                        loader.load(urlRequest);
                              protected function requestTokenHandler(event:Event):void
                              protected function httpResponse(event:HTTPStatusEvent):void
                                        label.text += event.status;
                                        // TODO Auto-generated method stub
                              private function completeHandler(event:Event):void {
                                        label.text += event.toString();
                                        trace("completeHandler data: " + event.currentTarget.data);
                              private function openHandler(event:Event):void {
                                        label.text += event.toString();
                                        trace("openHandler: " + event);
                              private function onError(event:ErrorEvent):void {
                                        label.text += event.toString();
                                        trace("onError: " + event.type);
                              private function onAsyncError(event:AsyncErrorEvent):void {
                                        label.text += event.toString();
                                        trace("onAsyncError: " + event);
                              private function onNetStatus(event:NetStatusEvent):void {
                                        label.text += event.toString();
                                        trace("onNetStatus: " + event);
                              private function progressHandler(event:ProgressEvent):void {
                                        label.text += event.toString();
                                        trace("progressHandler loaded:" + event.bytesLoaded + " total: " + event.bytesTotal);
                              private function securityErrorHandler(event:SecurityErrorEvent):void {
                                        label.text += event.toString();
                                        trace("securityErrorHandler: " + event);
                              private function httpStatusHandler(event:HTTPStatusEvent):void {
                                        label.text += event.toString();
                                        //label.text += event.responseHeaders.toString();
                                        trace("httpStatusHandler: " + event);
                              private function httpResponseStatusHandler(event:HTTPStatusEvent):void {
                                        label.text += event.toString();
                                        trace("httpStatusHandler: " + event);
                              private function ioErrorHandler(event:IOErrorEvent):void {
                                        label.text += event.toString();
                                        label.text += event.text;
                                        trace("ioErrorHandler: " + event);
                    ]]>
          </fx:Script>
          <fx:Declarations>
                    
          </fx:Declarations>
          <s:Label id="label" y="185" width="100%" color="#0A0909" horizontalCenter="0" text=""/>
</s:View>

Actionscript works in IDE,projector but not SWF

Hello, I'm atempting to create a swf that loads in a
controller swf and accesses some of the information contained
within the load swf. My main timeline is pretty simple.
var preloader_mc:MovieClip =
this.createEmptyMovieClip("preloader_mc",
this.getNextHighestDepth());
var labelcontainer:MovieClip =
this.createEmptyMovieClip("container", this.getNextHighestDepth());
var label:TextField = labelcontainer.createTextField("label",
1, 0, 365, 150, 20);
var TOCcontainer:MovieClip =
this.createEmptyMovieClip("TOCcontainer",
this.getNextHighestDepth());
var TOClabel:TextField =
TOCcontainer.createTextField("TOClabel", 1, 0, 300, 150, 20);
then I have an onenter frame function that access the
variable contained within the loaded swf.
loadMovie("xml_controller.swf", preloader_mc);
onEnterFrame = function () {
vTime =
this.preloader_mc.container.controlBar.timeView.label.value;
this.label.text = vTime
When I test the movie I see the time displayed and everything
is ok. When I create a projector file I see the time display. When
I try to run the swf, in a browser or straight from explorer All I
see is undefined for the values.
Anybody have any ideas why this would work in two
environments but not the third?

I saw this issue with a website I did. Sometimes the code
would work no problem in the projector but fail when I published to
the site.
Does the xml_controller.swf refer to _root anywhere? If you
have not locked the root and there is something it needs to access
locally it won't be able to find the item because the _root it is
referring to is now the load.swf movie

After downloading the new lion os x 10.7.2 with cloud and lion recovery update my internet doesnt work. I have tried 2 different networks that work for other people but not me. help?

After downloading the new lion os x 10.7.2 with cloud and lion recovery update my internet doesnt work. I have tried 2 different networks that work for other people but not me. help?

Logic's preference files may have become corrupted:
1. Quit Logic Pro
2. In the Finder, press and hold down the "option" key then select "Library" from the "Go" menu
3. Open the "Preferences" folder
4. Drag the following files to the Trash:
    - com.apple.logic.pro.cs
    - com.apple.logic.pro.LSSharedFileList.plist
    - com.apple.logic.pro.LSSharedFileList.plist.lockfile
    - com.apple.logic.pro.plist
    - com.apple.logic.pro.plist.lockfile
These files will be re-created when Logic is next opened.

HELP!! WRT54G2 works for one computer, but not for the other

I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!

As your one computer is working fine then there is no problem with the router so far...
The computer which is not working...check the IP Address on that...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark

Main Menu works in FF + IE7, but not IE6... why?

Similar Messages

Maybe you are looking for