Main vi gets corrupted after changing subvi
I have a main vi with a subvi in several layers in the hierarchy. After changing the subvi, the main vi does not open anymore, therefor gets corrupted.
I have a backup. It happened also with the backup. What should I do ?
Hi Bart,
replace your enum with a type-def'd version. I wrote this Nugget to help with this exact question. Please review that Nugget and post follow-ups if you still have questions.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Similar Messages
-
Loginwindow.plist gets corrupted after a restart
Hello,
I have an installer package that, aside from installing components, modifies the loginwindow.plist such that it adds entries for my components. The installer works fine on Tiger and Panther OSes btw.
However, on Leopard, the loginwindow.plist file gets corrupted after a restart. As a result, the components which I have added in the plist do not run automatically - rendering them useless to the user unless it is manually launched/run.
Deleting the file and installing my own loginwindow.plist file solves the problem but this isn't an ideal solution.
Is the loginwindow issue a known OS issue? Has there been a change with the loginwindow.plist format for Leopard such that modifications need to follow a certain text encoding? Can anyone provide solutions as to how this issue can be avoided?The .plist is in your user library.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Preferences/com.apple.desktop.plist.
After you remove it, you need to restart. -
The password file is getting corrupted after rebooting the standby database
Hi,
The password file is getting corrupted after rebooting the standby database.
Since the databases are not in sync, I had to copy the pwfile from primary to standby to make 'em sync.
(BUT.... the pwfile is not getting corrupted every time I reboot the standby by)
Could somebody please explain the reason for the pwfile on the standby database getting corrupted while rebooting ?
Env: Oracle 11g on Windows 7
Thanks in advanceModerator Action:
This thread was originally posted to the Oracle/Sun Servers HARDWARE forum.
This is definitely not an issue related to any hardware components.
... it's now moved to Database General Questions, hopefully for closer topic alignment. -
How to check query is getting reused after changing parametr cursor_sharing
Hello,
Oracle Version: 11g
OS Version: Windows 2003 64Bit
How to find if a particular query is getting reused after change in a cursor_sharing parameter from EXACT to SIMILAR.
Which set of Views/DD's should i query go get the relevant details.
Thanks in advance.
-Vijay.SQL> desc v$sqlarea
Name Null? Type
SQL_TEXT VARCHAR2(1000)
SQL_FULLTEXT CLOB
SQL_ID VARCHAR2(13)
SHARABLE_MEM NUMBER
PERSISTENT_MEM NUMBER
RUNTIME_MEM NUMBER
SORTS NUMBER
VERSION_COUNT NUMBER
LOADED_VERSIONS NUMBER
OPEN_VERSIONS NUMBER
USERS_OPENING NUMBER
FETCHES NUMBER
EXECUTIONS NUMBER
PX_SERVERS_EXECUTIONS NUMBER
END_OF_FETCH_COUNT NUMBER
USERS_EXECUTING NUMBER
LOADS NUMBER
FIRST_LOAD_TIME VARCHAR2(19)
INVALIDATIONS NUMBER
PARSE_CALLS NUMBER
DISK_READS NUMBER
DIRECT_WRITES NUMBER
BUFFER_GETS NUMBER
APPLICATION_WAIT_TIME NUMBER
CONCURRENCY_WAIT_TIME NUMBER
CLUSTER_WAIT_TIME NUMBER
USER_IO_WAIT_TIME NUMBER
PLSQL_EXEC_TIME NUMBER
JAVA_EXEC_TIME NUMBER
ROWS_PROCESSED NUMBER
COMMAND_TYPE NUMBER
OPTIMIZER_MODE VARCHAR2(10)
OPTIMIZER_COST NUMBER
OPTIMIZER_ENV RAW(797)
OPTIMIZER_ENV_HASH_VALUE NUMBER
PARSING_USER_ID NUMBER
PARSING_SCHEMA_ID NUMBER
PARSING_SCHEMA_NAME VARCHAR2(30)
KEPT_VERSIONS NUMBER
ADDRESS RAW(4)
HASH_VALUE NUMBER
OLD_HASH_VALUE NUMBER
PLAN_HASH_VALUE NUMBER
MODULE VARCHAR2(64)
MODULE_HASH NUMBER
ACTION VARCHAR2(64)
ACTION_HASH NUMBER
SERIALIZABLE_ABORTS NUMBER
OUTLINE_CATEGORY VARCHAR2(64)
CPU_TIME NUMBER
ELAPSED_TIME NUMBER
OUTLINE_SID VARCHAR2(40)
LAST_ACTIVE_CHILD_ADDRESS RAW(4)
REMOTE VARCHAR2(1)
OBJECT_STATUS VARCHAR2(19)
LITERAL_HASH_VALUE NUMBER
LAST_LOAD_TIME DATE
IS_OBSOLETE VARCHAR2(1)
CHILD_LATCH NUMBER
SQL_PROFILE VARCHAR2(64)
PROGRAM_ID NUMBER
PROGRAM_LINE# NUMBER
EXACT_MATCHING_SIGNATURE NUMBER
FORCE_MATCHING_SIGNATURE NUMBER
LAST_ACTIVE_TIME DATE
BIND_DATA RAW(2000) -
Music and videos gets corrupted after syncing
I have been having this issue for quite sometime now. It first started when I was using an old laptop to sync my iPod touch 4th gen. Not just syncing, just transferring music and videos. But the videos get corrupted after transferring the file from the laptop to ipod. I thought it was the cable but as soon as used a faster laptop, the videos were transferred without any corruption issues. I reformattd the laptop as it might have some malware or other softwares interrupting the usb transfer but it still gets corrupted. So I thought, the communication between pc and the new ipod system might be too much for an old intel core duo @ 1.6ghz to handle.
Now, I am using a laptop with intel core 2 duo @ 2.0ghz. The corruption issue is now returning. The music can be played but when playing, it seems like it's jumping, stuttering or something. Please note that it can be played but it sounded like a bad interrupted download.
For the old laptop, the videos are usually the ones the gets corrupted. For the new laptop, it happened recently during a massive sync I performed. I wonder if there's a usb buffer thing that gets full.
Anyway, is there a way to prevent this or check which mp3s are corrupted? I have plan to copy all the mp3s using TouchCopy, then compare the mp3s to my source mp3 using BeyondCompare.You can't copy music from a i device to a Mac computer. Only from a Mac computer to a i device. So you will have to copy over your iTunes library from your old computer to your new Mac.
-
Roaming profile gets corrupted after password change during session logon.
When users are force to change password during logon (after it has expired) their roaming profile gets corrupted. All workstations are Windows 8 and domain is Server 2008 R2. The delete cached profile copies policy is enabled and therefore the issue matches
exactly with http://support.microsoft.com/kb/971338/en-gb except it's the wrong OS.
I've been trying to find a hotfix for Windows 8 without any luck so just wondering if anybody managed to get around this issue.Hi,
Have you tried the workaround method in the link? did it worked? Actually, form now, there is still no helpful hotfix to fix this problem.
In addition, what about change password from other client? not Windows 8.
Roger Lu
TechNet Community Support -
WebI reports getting corrupted after pointing to different version of the Universe
Post Author: Sujitha
CA Forum: WebIntelligence Reporting
Hi
I am facing a very difficult and weird problem ..plz help !!!
I am curently working in a project which has different phases of testing.While migrating my reports from Dev environment to SYS, I had to change the database connection in the Universe to SYS.After doing so,I point the reports (webI reports) to this new universe.
All my report variables are getting corrupted and automatically appended with a " " in the formulae of the report
for eg if my report variable is =if([dimension object];" ";" ")
the variable becomes "=if([dimension object];\" \";\" \") "--- plz note that a \ gets appended in front of the " within the formula!!!
This problem repeated when i had to migrate the reports from UAT back to SYS!!!
I have a report which is fullly hard coded(business wants so!!) and has some 300 report variables... so I cannot manuaaly edit them in each migration
Can you please help me if you have a work around for this issue??
I read in BOB that its a BO bug,it it true?
Thanks in advancePost Author: Sujitha
CA Forum: WebIntelligence Reporting
Thanks a lot for ur quick reply
The objects in the universe are just teh same,I just import the existing universe,change the connection to SYS and then export it to a new folder.
Its behaving weird,yesterday i createda new folder instead of using the existing SYS folder for universe,i exported the universe.NOw I pointed the report with 300 variables to this new universe and it was working fine... and then when i did the same for the remaining reports..all got corrupted like stated before... i had to manuaaly go and esit every variable cause it was urgent for me to migrate to SYS.
I was saved cause my report with large variables got saved!!! -
We were running jre 1.3.0_02. The image upload functionality was working fine with this version. But after upgrading to jre1.3.1_15, the uploaded image shows correct file size but it gets corrupted.
Please help.I found that the problem with encoding. If wrote a sample application which read gif file and print the value.
Here is sample application:
import java.io.FileInputStream;
public class TestCopy {
public static void main(String[] args) {
String filename = "/home/appliance/data/frontpanel/logo.gif";
StringBuffer sb = new StringBuffer();
try{
// System.setProperty("file.encoding", "ISO-8859-1");
FileInputStream f = new FileInputStream(filename);
System.out.println("<SaveOnAllServlet> autoSaveArgs :"+filename);
int c;
while((c = f.read()) != -1){
System.out.println(c+"->"+(char)c); // This is problematic for me
sb.append((char)c);
System.out.println("Copy complete...");
System.out.println(System.getProperty("file.encoding"));
f.close();
// System.out.println(sb);
catch (Exception e) {
e.printStackTrace();
when I run this program on jre1.3.0_02 get value of file.encoding as 8859_1 and on running same application on jre1.3.1_15 I get encoding value ANSI_X3.4-196
Please let me know how can I set desired encoding... I wants to set default encoding of jre1.3.0_02 to default encoding of jre1.3.1_15
thanks in anticipation. -
Interface getting failed after changing the Business system to that service
Hello All,
Our Env... is XI 3.0 and this is related to produciton env.
Based on our client requirment to change the business system from client 871 to 100 for one of the R3 system which is reciever type(rfc).
After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in the system.
The steps which I have followed to change the Business system.
1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
Then i saved the changes and after that i have activated that interface.
After that when i logged into CC monitoring and viewed that service channels and see the following errors:
Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
Awaiting for your reply.
Best Regards
Rakesh ReddyHello Nisar
Thanks for the update,
Let me say few points about this particular problem:
1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
3>As mentioned by you , I have checked all the points mentioned
i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
It says that:
RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
If any information required , I can provide that.
Best Regards
Rakesh Reddy -
Files get corrupted after import-export
Hi
After exporting images from HTML DB 2.0 and importing them some of the files are corrupted after import.
This has happened with one .js file and with one .pdf file.
All the other (including some PDF-s) are correct.
The "File Character Set" specified on import is correct and there are no other parameters I can change.
If I look the contents of corrupted files it seems that another file has been pasted at the end of the original file.
What could be wrong?Hello,
Any news on this ? I have the same (reproducable) problem with a .js file.
Uploading works fine, but when I try to download it again, the contents of another file seems to have been appended at the end. The file also doesn't work when I try to include it using #WORKSPACE_IMAGES#...js
Matthias -
My RAW images get corrupted after downloaded HELP
Hey anyone, and if you do not know why this is happening, please pass it on.
attached in an image I was looking at in LR, this same problem has occurred in Bridge. while looking at images all of a sudden part or all of the image goes into psychedelic colors as seem in the lower rt side. anything from a line thru the middle of the picture to the total image with all sorts of mosaics of color this has been happening for may years. a forum told me I had a corrupt card reader, another said something to do with the computer. so to put this in perspective. i have used many different card readers, two different computers. two different operating windows systems. original was XP and new one is windows 7. this image was not copied from one computer to another so it is a new image downloaded into the newer computer. Once in a while when I open the image it reverts back to the image without the wiierd colors in it. If I bring it into bridge the same things happen in corruptions . I have lost images from many years ago in bryce canyon to this issue .
Once the image is saved in a different formate , JPG< PSD, Tiff. etc it never corupts. ONLY the RAW files corrupt and DNG. for a while I started shooting in both JPG and RAW just to have a back up. two different cameras, many different card readers. many cards. still happening. any help would be appreciated , have not found anything on the adobe forums. if you have no idea could you pass this one to friends , need a solution, for a while I backed up all the images when downloading directly to a hard drive without going thru LR or photoshop just to have a replacement. that just gets crazy to do after time.
As you can see on the lower left there is crazy stuff going on. sometimes it is the total image corrupted.
PS , if the two forums , fred miranda, and lumosity landscapes , do not have an answer, please help me find one. it is horrible to loose images from years ago much less last wk to this issue.
BTW this does not happen on my old Vista laptop, thanks for helping in advance. stevethanks,
last option not viable, LR or PS really can not be replaced, I could live
without LR , have had it since version 1 release think 2007ish. It was
mainly a way to keep track of ones images via search words . good idea,
since this was difficult pre-digital with tons of negative.
I use it for down and dirty qucik editing to post something on G+ or FB
but not for final editing. RAW thru PS is where I do that and then into
PS .
If my wife would not leave me I would switch to Mac. not happening as a
hobby at this time. my guess is a freaking RAM issue or operatting system
that maybe when I transfered my images from the old computer to the new I
carried some type of bug with the transfer to the new computer. but that
is reallllly reaching.
Adobe has not been helpful in the least, but that is not new.
you are only one of two people to give some advice, very appreciated and I
am about 98% that your suggestions are correct.
steve -
Getting lag after change new mother board
i tried everything, installed my windows 5 times, upgrade all drivers, setting bios
but i still getting lag especially when playing warcraft tft game, all starts when i change my mobo ms-7313 v
please help me ,im getting stress b'coz of it .
please look at this, hope can help me with this prob!
Operating System: Microsoft Windows XP Professional 5.01.2600 Service Pack 2
Report Date: Friday 01 August 2008 at 03:48
<<< System Summary >>>
> Mainboard : MICRO-STAR INTERNATIONAL CO.,LTD MS-7313
> Chipset : Intel i945G/GZ
> Processor : Intel Pentium 4 530J @ 3000 MHz
> Physical Memory : 1536 MB
> Video Card : NVIDIA GeForce 6600
> Hard Disk : SAMSUNG (160 GB)
> DVD-Rom Drive : TSSTcorp CDW/DVD SH-M522C
> Monitor Type : RM170 -
> Network Card : Realtek Semiconductor RTL8168/8111 PCI-E Gigabit Ethernet NIC
> Operating System : Microsoft Windows XP Professional 5.01.2600 Service Pack 2
> DirectX : Version 9.0c
<<< Mainboard >>>
> Manufacturer : MICRO-STAR INTERNATIONAL CO.,LTD
>> General Information
Product : MS-7313
Version : 1.0
Serial Number : To Be Filled By O.E.M.
Unique ID : FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF
SKU : To Be Filled By O.E.M.
Family : To Be Filled By O.E.M.
Start mode : Power Switch
> Mainboard : MICRO-STAR INTERNATIONAL CO.,LTD MS-7313
>> General Information
Manufacturer : MICRO-STAR INTERNATIONAL CO.,LTD
Product : MS-7313
Version : 1.0
Serial Number : To be filled by O.E.M.
Support MP : Yes, 1 CPU(s)
Version MPS : 1.4
>> Chassis Information
Manufacturer : MICRO-STAR INTERNATIONAL CO.,LTD
Type : Desktop
Version : 1.0
Serial Number : To Be Filled By O.E.M.
Asset : To Be Filled By O.E.M.
>> Sensor Information
Hardware Monitoring : Fintek F71882FG
>> On-Board Device Information
Embedded Controller : Yes
>> Slots Information
>> External Connectors
> Bios : American Megatrends Inc.
>> General Information
Manufacturer : American Megatrends Inc.
Version : V1.1
Date : 07/16/2008 (mm/dd/yyyy)
Address : 0x0 on 512 KB
Copyright : (C)2006 American Megatrends, Inc
Motherboard ID : 63-0100-000001-00101111-071608-Lakeport-0AAAA000
DMI Version : 2.5
>> Characteristics
Flashable : Yes
Socketed : Yes
>> Functionality
APM : Yes
ACPI : Yes
ESCD : Yes
PnP : Yes
PCI : Yes
ISA : Yes
AGP : No
USB : Yes
PCMCIA : No
Smart Battery : No
>> Boot Information
Selectable Boot : Yes
CD-ROM Boot : Yes
PC Card (PCMCIA) Boot : No
I20 Boot : No
LS-120 Boot : Yes
1394 Boot : No
ATAPI ZIP Boot : Yes
Network Boot : No
> Chipset : Intel i945G/GZ
>> General Information
NorthBridge : Intel i945G/GZ
SouthBridge : 82801GB/GR (ICH7 Family) LPC Interface Controller
>> NorthBridge Information
Architecture : Direct Media Interface (DMI)
Manufacturer : Intel (Micro-Star International Co Ltd (MSI))
Codename : Lakeport
Revision : A2
Bus Speed : 201.7 MHz
FSB Frequency : 806.6 MHz (QDR)
FSB max. Support : 800 MHz
RAM max. Support : DDR2 (667 MHz)
>> Memory Information
Type : DDR2-SDRAM PC2-4300
Frequency : 268.9 MHz
DRAM/FSB Ratio : 4/3
Supported Channels : Dual (128-bit)
Activated Channels : Dual
ECC Diagnostic : No
CAS Latency (tCL) : 4 clocks
RAS to CAS (tRCD) : 4 clocks
RAS Precharge (tRP) : 4 clocks
Cycle Time (tRAS) : 11 clocks
Bank Cycle Time (tRC) : 15 clocks
>> PCI-Express Information
Number of ports : 3 - (x16, x1, x1)
>> Video Information
Integrated Controller : No
Enabled : No
>> Functionality
SATA AHCI Enabled : No
RAID 0/1/10 Enabled : No
RAID 5 Enabled : No
PCI Express x1 Enabled : No
Intel AMT : Yes
Intel QST : No
SPI Interface : Yes
>> Device Capabilities (PCI)
I/O Access : No
Memory Access : Yes
Bus Master Capable : Yes
Special Cycle Recognition : No
Memory Write & Invalidate : No
VGA Palette Snoop : No
Parity Error Response : No
Cycle Wait : No
System Error Line : No
Fast Back-to-Back : No
Detects Parity Errors : No
User Defined Format : No
PCI 66Mhz Bus Support : No
New Capability List : Yes
PCI Support : Vendor-Dependant
> Physical Memory : 1536 MB DDR2-SDRAM
>> General Information
DIMM0 (RAS 0, RAS 1) : 512 (Single Bank)
DIMM1 (RAS 4, RAS 5) : 1024 (Double Bank)
>> Information SPD EEPROM (DIMM0)
Manufacturer : Samsung
Part Number : M3 78T6553BZ0-KD5
Serial Number : 4601E3C3
Type : DDR2-SDRAM PC2-4300 (266 MHz) - [DDR2-533]
Format : Regular UDIMM (133.35 x 3)
Size : 512 MB (1 ranks, 4 banks)
Module Buffered : No
Module Registered : No
Module SLi Ready (EPP) : No
Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8 탎
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Manufacture : Week 15 of 2005
Supported Frequencies : 200 MHz, 266 MHz, 266 MHz
CAS Latency (tCL) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @266 MHz
RAS to CAS (tRCD) : 3 clocks @200 MHz, 4 clocks @266 MHz, 4 clocks @266 MHz
RAS Precharge (tRP) : 3 clocks @200 MHz, 4 clocks @266 MHz, 4 clocks @266 MHz
Cycle Time (tRAS) : 8 clocks @200 MHz, 11 clocks @266 MHz, 11 clocks @266 MHz
Min TRC : 11 clocks @200 MHz, 15 clocks @266 MHz, 15 clocks @266 MHz
>> Information SPD EEPROM
Manufacturer : Samsung
Part Number : M3 78T2953CZ3-CD5
Serial Number : F10A5A5B
Type : DDR2-SDRAM PC2-4300 (266 MHz) - [DDR2-533]
Format : Regular UDIMM (133.35 x 3)
Size : 1024 MB (2 ranks, 4 banks)
Module Buffered : No
Module Registered : No
Module SLi Ready (EPP) : No
Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8 탎, Self Refresh
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Manufacture : Week 12 of 2007
Supported Frequencies : 200 MHz, 266 MHz, 266 MHz
CAS Latency (tCL) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @266 MHz
RAS to CAS (tRCD) : 3 clocks @200 MHz, 4 clocks @266 MHz, 4 clocks @266 MHz
RAS Precharge (tRP) : 3 clocks @200 MHz, 4 clocks @266 MHz, 4 clocks @266 MHz
Cycle Time (tRAS) : 8 clocks @200 MHz, 11 clocks @266 MHz, 11 clocks @266 MHz
Min TRC : 11 clocks @200 MHz, 15 clocks @266 MHz, 15 clocks @266 MHz
>> Memory Controller Information
Memory Controller : DIMM, SDRAM
Number of connectors : 2
Supported Speed : Unspecified
Supported Voltages : 3.3v
Error Detection Method : 64-bit ECC
Error Correction Capability : None
Current/Supported Interleave : 1-way/1-way
> LPC bus : Yes
>> Bus Information
Type : ISA - LPC
Device : 82801GB/GR (ICH7 Family) LPC Interface Controller
Revision : 01
Number of ISA Connectors : 0
>> Device Capabilities (PCI)
I/O Access : Yes
Memory Access : Yes
Bus Master Capable : Yes
Special Cycle Recognition : No
Memory Write & Invalidate : No
VGA Palette Snoop : No
Parity Error Response : No
Cycle Wait : No
System Error Line : No
Fast Back-to-Back : No
Detects Parity Errors : No
User Defined Format : No
PCI 66Mhz Bus Support : No
New Capability List : Yes
PCI Support : Vendor-Dependant
> PCI Bus : No
> Bus PCI-Express : Yes
>> PCI-Express Information
Number of connectors : 1
>> Bus PCI-Express
Device : 82945G/GZ/P/PL PCIe Root Port
Version : 1.0
Port : 2
Physical Slot : #0
Slot Populated : Yes
Link Width : x16 (max. x16)
Link Speed : 2.5 GB/s
>> Bus PCI-Express
Device : 82801G (ICH7 Family) PCIe Root Port
Version : 1.0
Port : 1
Physical Slot : #4
Slot Populated : No
Link Width : max. x1
Link Speed : 2.5 GB/s
>> Bus PCI-Express
Device : 82801G (ICH7 Family) PCIe Root Port
Version : 1.0
Port : 2
Physical Slot : #4
Slot Populated : Yes
Link Width : x1 (max. x1)
Link Speed : 2.5 GB/s
>> Bus PCI-Express
Device : GeForce 6600
Version : 1.0
Port : 0
Link Width : x16 (max. x16)
Link Speed : 2.5 GB/s
> USB Bus : Yes
>> Device Information
Device : 82801G (ICH7 Family) USB Universal Host Controller
Version : 1.0
Interface : UHCI
Frequency : 48 MHz
>> Device Information
Device : 82801G (ICH7 Family) USB Universal Host Controller
Version : 1.0
Interface : UHCI
Frequency : 48 MHz
>> Device Information
Device : 82801G (ICH7 Family) USB Universal Host Controller
Version : 1.0
Interface : UHCI
Frequency : 48 MHz
>> Device Information
Device : 82801G (ICH7 Family) USB Universal Host Controller
Version : 1.0
Interface : UHCI
Frequency : 48 MHz
>> Device Information
Device : 82801G (ICH7 Family) USB 2.0 Enhanced Host Controller
Version : 2.0
Interface : EHCI
> SMBus/i2c Bus : Yes
>> General Information
Device : 82801G (ICH7 Family) SMBus Controller
Revision : 1
Frequency : 16 KHz
Address : 0x400
>> Device Capabilities (PCI)
I/O Access : Yes
Memory Access : No
Bus Master Capable : No
Special Cycle Recognition : No
Memory Write & Invalidate : No
VGA Palette Snoop : No
Parity Error Response : No
Cycle Wait : No
System Error Line : No
Fast Back-to-Back : No
Detects Parity Errors : No
User Defined Format : No
PCI 66Mhz Bus Support : No
New Capability List : No
> Bus HyperTransport : No
> Bus CardBus : No
> Bus FireWire : No
<<< Processor >>>
> Processor : Intel Pentium 4 530J
>> General Information
Type : Intel Pentium 4
Internal Specification : Intel(R) Pentium(R) 4 CPU 3.00GHz
Model Number : 530J
Codename : Prescott
Revision : E0
Technology : 0.09μ
CPU ID : F.4.1
CPU IDEx : F.4.1
Microcode : MU0F4117
Number of Logical Processors : 2
>> Instructions
IA-64 Technology : No
Intel64 (EM64T) : No
AVX : No
FPU128 : No
SSE5 : No
SSE4a : No
SSE4.2 : No
SSE4.1 : No
S-SSE3 : No
SSE3 : Yes
SSE2 : Yes
SSE : Yes
Extended 3DNow! Technology : No
3DNow! Technology : No
3DNOW Prefetch : No
3DNow! Pro Technology : Yes
AMD MMX Technology : No
MMX Technology : Yes
Cyrix MMX Technology : No
FMA : No
AES : No
OSXSAVE : No
CLF - Cache Line Flush : Yes
CX8 - CMPXCHG8B : Yes
CX16 - CMPXCHG16B : No
CMOV - Conditionnal Move Inst. : Yes
MON - Monitor/Mwait : Yes
POPCNT : No
RDTSCP : No
SEP - Fast System Call : Yes
>> Miscellaneous
XD - No-execute Page : No
VT - Vanderpool Technology : No
TXT - Trusted Execution Technology : No
SVM - Secure Virtual Machine : No
FPU - Co-processor Built-in : Yes
FXSR - Fast Float Save & Restore : Yes
xTPR - Send Task Priority : Yes
DAZ - Denormals Are Zero : Yes
FFXSR : No
LAHFSAHF : No
CMPLEGACY : No
ALTMOVCR8 : No
ExtApicSpace : No
3DNow! Technology : No
PBE - Pend. Brk. EN. : No
LAHF - LAHF/SAHF Inst. : No
ABM : No
MASSE - Misaligned SSE : No
OSVW - OS Visible Workaround : No
IBS : No
P1GB - 1GB Page Size : No
SKINIT, STGI, DEV : No
WDT - Watchdog Timer : No
>> Features
VME - Virtual Mode Ext. : Yes
DE - Debugging Extension : Yes
PSE - Page Size Extension : Yes
TSC - Time Stamp Counter : Yes
MSR - Model Specific Registers : Yes
PAE - Physical Address Extension : Yes
MCE - Machine Check Exception : Yes
APIC - Local APIC Built-in : Yes
MTRR - Memory Type Range Reg. : Yes
PGE - Page Global Enable : Yes
MCA - Machine Check Architecture : Yes
PAT - Page Attribute Table : Yes
PSE36 - 36-bit Page Size Extension : Yes
PSN - Unique Serial Number : No
DS - Debug Trace & EMON Store : Yes
SS - Self Snoop : Yes
ACPI - Software Clock Control : Yes
TM - Thermal Monitor : Yes
TM2 - Thermal Monitor 2 : No
EST - Enhanced SpeedStep Technology : No
HTT - Hyper-Threading : Yes
SBF - Signal Break on FERR : Yes
DSCPL - CPL qualified Debug Store : Yes
CID - Context ID : Yes
LT - LaGrande Technology : No
PDCM : No
DCA - Direct Cache Access : No
EPS - Enhanced PowerSaver : No
>> Features Hyper-Threading
Technology : Yes - Enabled
Physical Processor #1 : Apic ID 0
Logical Processor #1 : Apic ID 1
>> Addressing Information
Physical Addressing max. : 36-bit
Linear Addressing max. : 32-bit
>> Advanced Settings
In Order Queue Depth : 12
Fast-Strings : Yes
x87 FPU Opcode : No
Thermal Monitor : Yes
Split-Lock : Yes
Performance Monitoring : Yes
Prefetch Queue : Yes
Branch Trace Storage : Yes
C1E - Enhanced Halt State : Yes
Temperature Control : 66 °C
PRB - Performance Requirement Bit : No
>> Mainboard Upgradeability
Socket/Slot : CPU 1
Upgrade interface : Unspecified
Supported Speed : 3000 MHz (or more)
Supported Voltage : 1.3V
> Frequency : 3000 MHz
>> General Information
Real Frequency : 3024.85 MHz
Multiplier : 15x
Low/High Multiplier : 14x / 15x
Multiplier Locked : Yes
Marketing Frequency : 3000 MHz
>> Front Side Bus Information
Bus Speed : 201.7 MHz
FSB Frequency : 806.6 MHz (QDR)
>> Initial Frequencies
Frequency : 3000 MHz
Bus Speed : 200.00 MHz (QDR)
Multiplier : 15x
>> Control Clock Frequency
Type : None
>> Thermal Information
Thermal Design Power : 89 W
Core Power : 89.74 W (estimated)
Resistance : 0.14 °C/W (estimated)
Thermal control TM1 : Yes - Enabled
Thermal control TM2 : No
Thermal Control Circuit : No
Digital Thermal Sensor : No
Clock Modulation (ODCM) Enabled : No
>> Processor Performance Information
Throttle Mode AC : None
Throttle Mode DC : Adaptive
Current Configuration : None
Throttle : 3025 MHz
> Support : Socket 775 LGA
> Data Cache L1 : 16 KB
>> General Information
Write Mode : Write-Through
Place : Internal
Correct : Parity
>> Cache Information
Data Cache : 16 KB (8-way, 64 bytes line size)
L1 Context Mode : Adaptive
>> Cache Parameters
Type : Data Cache
Ways of associativity : 8
Fully Associative : No
System Coherency Line Size : 64
Physical Line partitions : 1
Number of threads sharing : 2
Number of processor cores : 1
Number of Sets : 32
> Trace Cache L1 : 12 Kμops
>> Cache Information
Trace Cache L1 : 12 Kμops (8-way)
>> Cache Parameters
Type : Data Cache
Ways of associativity : 8
Fully Associative : No
System Coherency Line Size : 64
Physical Line partitions : 1
Number of threads sharing : 2
Number of processor cores : 1
Number of Sets : 32
> Cache L2 : 1024 KB
>> General Information
Write Mode : Write-Back
Place : Internal
Multiplier : 1/1x (3024.9 MHz)
Correct : Single-bit ECC
>> Cache Information
Associativity : 8-way
Line Size : 64 bytes
Bus : 256-bit
Prefetch Logic : Yes
>> Cache Parameters
Type : Unified Cache
Ways of associativity : 8
Fully Associative : No
System Coherency Line Size : 64
Physical Line partitions : 2
Number of threads sharing : 2
Number of processor cores : 1
Number of Sets : 1024
> FPU Coprocessor : Present
>> General Information
Integrated : Yes
Model : Compatible Intel
> Processor activity : : 0%
<<< Video >>>
> Number of monitor : 1
>> Monitor Information #1
Monitor : 플러그 앤 플레이 모니터
Linked on : NVIDIA GeForce 6600
Resolution : 1280x1024
Working desktop : 1280x994
Main monitor : Yes
> Monitor Type : RM170
>> General Information
Product ID : SEG1A85
Model : RM170
Serial Number : H111701830
Manufacture : Week 21 of 2002
Video Input Type : Analogic
Aspect Ratio : 16:10
Gamma Factor : 3.55
DPMS Active-Off : Yes
DPMS Suspend : Yes
DPMS Standby : Yes
EDID version : 1.3
>> Features
Maximum Resolution : 1280 x 1024 @ 60 Hz
Horizontal frame rate : 30 - 80 kHz
Vertical frame rate : 58 - 75 Hz
Bandwidth : 140 MHz
>> Video Modes Supported
Mode : 720 x 400 @ 70 Hz
Mode : 640 x 480 @ 60 Hz
Mode : 640 x 480 @ 67 Hz
Mode : 640 x 480 @ 75 Hz
Mode : 800 x 600 @ 60 Hz
Mode : 800 x 600 @ 72 Hz
Mode : 800 x 600 @ 75 Hz
Mode : 832 x 624 @ 75 Hz
Mode : 1024 x 768 @ 87 Hz interlaced
Mode : 1024 x 768 @ 75 Hz
Mode : 1280 x 1024 @ 75 Hz
> Video Card : NVIDIACreate a signature with PC components and PSU specs, see our sigs for examples of what to provide.
Example of PSU specs: Corsair VX450W, +3.3V~20A, +5V~20A, +12V~33A
To create signature:
Click on PROFILE above (near top of this page) and then in your "Profile", what I show in red below under "Modify Profile", scroll down to "Signature" and enter your specs in the box and then click on "Change profile" button on the bottom.
Profile Info
Summary
Show Stats
Show Posts
Modify Profile
Account Related Settings
Forum Profile Information
Look and Layout Preferences
Notifications and Email
Personal Message Options -
OEM is not getting started after changing the Server name
Hello DBAs
Recently I installed Oracle database 10g on my a windows machine. It was working fine. Integrated OEM was also working fine.
But now I have changed the machine name. Now Oracle Database has come up after updating the listener.ora & tnsnames.ora files with new server name. But OEM page is not getting open now. I tried after updating the emd.properties and other related file on ORACLE_HOME\sysman folder with the new server name. But no luck.
In windows services one service named *"OracleDBConsoleDbname"* is not getting started, which could be the issue.
Can someone please guide me what can be done to fix this problem.
Thanks
-NaveenHi Naveen,
What you are doing is not supported by Oracle. From EM Database Console FAQ (863631.1):
What action needs to be taken if the hostname or SID of the database server is changed?
If there is a hostname or SID change for the database server then the database console needs to be recreated. There is no other solution if the hostname or SID is changed other that recreating the database console. All database console configuration files are created under the hostname_sid directory and the configuration files along with the repository keeps reference of the hostname, which is why dbconsole needs to be reconfigured if there is change in hostname/sid.
Refer : Note.293678.1 How To Reconfigure DB Control After a Hostname, Domain name or Listener Change Has Occurred On The Server
And take a look at note 278100.1: How To Drop, Create And Recreate DB Control In A 10g Database
Eric -
Why main criteria getting zero after auto.new evaluation in ven.evaluation?
Dear experts,
while maintaining vendor evaluation in me61,after selecting auto.new evaluation the weighting of price and quality got zero.Only the delivery is getting calculated.It differs from each vendor(i.e not constant to all). why all the three main criterias are not getting calculated? Pls tel me why it is?.
Thanks in advance.as far as I know, the Scanner uses the DecimalFormat defined for your Location - so try to insert the decimal in the localized form.
I tested your Applicaion using the german format with a ',': 10,78 on my machine (a German Windows XP) and it worked.
To avoid the endless loop, you need to clear the Scanner in the catch clause:
catch (InputMismatchException e)
System.out.println("Please enter a number!");
// get rid of old stuff
if(console.hasNext()) console.next();
...else the Scanner tries to convert its entry into a Decimal over and over again -> your endless loop.
Lars. -
OS gets corrupted after software updates
Hello everyone,
My Macbook Pro has been having difficulties recently (eg. keyboard input changing to random symbols, Trackpad not fully functioning, Internet links not opening). I sent it to the Apple service centre. They informed that there was nothing wrong with my laptop's hardware but, a software update had corrupted my OS. Hence, they reloaded my OS and my mbp worked again. However, yesterday, when I installed the new Mountain Lion update, the same problems have resurfaced. Any idea why that might be happening?Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.
Maybe you are looking for
-
Raising Exceptions in WDA?
Hi, I want to know about raising exception in wda. Please explain in details. Scenario: I have one input field as mandatory. if i click the button without filling that input field, self defined exception should raise. How to do this? Thanks, Gopi.
-
Best practice for application debug logging?
I am building a webcenter portal using Oracle Webcenter 11.1.1.1.5 and deploying on Oracle Weblogic Server 11g. Please suggest what is the best practice to use for application debug logs. Should I use log4j or Apache commons library? Is it possible t
-
Trying to use newly compiled MoPub ANE with Universal Binary Plugin x86 support for IOS Platform with Adobe Air SDK 16.0 for IOS App, i am encountering this compile time error. Adobe AIR [java] Picked up _JAVA_OPTIONS: -Xmx512m [java] Picked up
-
Managment Agent 10.2.0.5 Win32 JBOSS plugin
When ever I select to add Jboss and enter the proper JBOSS home (D:\JBOSS\BIN) and local administrator account and type next I get the Oracle Agent (Already installed on machine Win2003 SVR SP2) then I click next and it says no oracle managment agent
-
Trouble getting MBP to print to Xerox Docucolor240
I have downloaded the driver. I am able to add the printer from the network @ work. I am even able to print a test page.... however when I send documents from my laptop, they dont print. I dont get an error. They show up as having been "completed", b