Main VI is not updating the data from subVI

Dear all,
I
have a Vi A using the data front a subVi B. When I run it, I see the
data is updating in the subVI, but not the main Vi and the Front Panel.
The subVi has three output channels and the main Vi tries to display
those three channel data on the Front Panel.
Could somebody tell me how I can solve the problem?
Thanks a lot.
Roy
Solved!
Go to Solution.

You could probably use Control Refnums but as Dennis mentioned, be sure to explain the use case to us.
How Can I Update the Changes Made to a Control/Indicator from a SubVI on the main VI?
Message Edited by Adnan Z on 06-02-2009 02:48 PM
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Similar Messages

  • Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

    Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

    If you just installed iCloud does that mean you updated the iOS that's running on your iPad?  If so, you'll want to restore all the programs you have from the backup you hopefully made.
    Refer to these articles for help.
    iTunes: Backing up, updating, and restoring iOS software.
    If you don't want to use iCloud, simply don't activate it.
    You can also download the programs again.
    If you live in a country that supports re-downloading apps then you can re-download them.  You can refer to this article for more help.
    Downloading past purchases from the App Store and iTunes Store
    What to know if your country supports downloading past purchases?
    iTunes in the Cloud Availability

  • Keynote document saved in icloud not updating with data from Numbers? is icloud the problem

    keynote document saved in icloud not updating with data from Numbers? is icloud the problem.
    If both files are held locally on the computer it looks like there is no problem however if you try and do it though icloud (ie your docs are saved on icloud) you dont get the "source" oprion besides the graph etc. Is this a but or a broken function due to the new implementation of icloud.

    Hi sebnor31,
    This is Visual C# forum, but your question seems not related to Visual C# language itself. It most likely related to the bluetooth message transaction protocal or with the device itself.
    I'll move your question to [where is this forum for...] forum where the morderator may direct you to the correct forum.
    Thanks for your understanding.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    Hello. Most of the engineers in developer exchange are more familiar
    with NI products. Contacting ICS for technical support is a better
    course of action.

  • Report is not fetching the data from Aggregate..

    Hi All,
    I am  facing the problem  in aggregates..
    For example when i  am running the report using Tcode RSRT2, the BW report is not fetching the data from Aggregates.. instead going into the aggregate it is scanning whole cube Data....
    FYI.. Checked the characteristcis is exactely matching with aggregates..
    and also it is giving the  message as:
    <b>Characteristic 0G_CWWPTY is compressed but is not in the aggregate/query</b>
    Can some body explain me about this error message.. pls let me know solution asap..
    Thankyou in advance.
    With regards,
    Hari

    Hi
    Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
    GTR

  • Extraction time while updating the data from update rule

    Hello Friends,
    Can you please tell me that why it is taking more time while updating the data from update rule to data target.
    I believe that it is taking 40% of total extraction time.
    Is there any specific reason for it?
    Prompt reply will be appreciated.
    Regards,

    hi,
    check if you have complex transformation in that update rules, like calculation, read from other tables, etc.
    take a look 'bw loading performance and analysis' doc
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
    and bi performance tuning knowledge center
    Business Intelligence Performance Tuning [original link is broken]
    there e-learning for bw performance
    hope this helps.

  • I have a 2nd generation iPod touch.  I have not updated the software from version 2.2.1.  When I connect to iTunes to update to 4.2, I keep getting an error message.  Has anyone else had this issue and figured out a way to fix it?

    I have a 2nd generation iPod touch.  I have not updated the software from version 2.2.1.  When I connect to iTunes to update to 4.2, I keep getting an error message.  Has anyone else had this issue and figured out a way to fix it?

    Error -1
    Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    Also see:
    -1 error
    -1 error too

  • PC Sync could not update the data to the mobile ph...

    Ok now I am a little annoyed with my Nokia 6680.
    For the last four months it has been working fine but all of a sudden it has stopped synching with either of my PC's.
    The phone connects ok and I can do file transfers etc however when I try to sync it fails with the message
    "The Synchronisation has been Terminated!"
    and
    "PC Sync could not update the data to the mobile phone."
    I updated PC Sync to latest version on both PC's and I have tried cable and bluetooth connections but get the same issue.
    In the end I bit the bullet and re-initialised the phone and it began working again.... for three days and then its doing the same thing again. It still connects ok but no sync.
    My Laptop is using WinXP SP2 and my home PC is on WinXP SP1.
    Anyone able to help with this please, my phone is effectively now a paper weight and I will go back to Pocket PC phones again.

    Thanks for the tip I had the SAME problem on the 6822 same error. The phone had been fine for a month or so. Then nothing would synch, thought it was the PC fixed / reinstalled the software changes options nothing would work same error.
    Read your note, powered down the phone and Bingo all synched fine!
    Thanks very much. I'm using a Nokia 6822

  • Can we update the data from SSRS report to any database ?

    Hi Team,
    Greetings !!!!
    Can we update the data from SSRS report to any database ?
    Thanks,
    Anand Gavle.

    Nope SSRS doesnt have write back options. Its just a reporting tool
    However one thing you can do is to link a webpage from SSRS report and do the changes through it
    SSRS has the ability to navigate to web page through which you can capture any data inputs from users and save it to your db.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • HT4623 my 2nd. generation ipod will not update the software from 2.2 to 4

    my 2nd. geration ipod will not update the software from 2.2 to 4 or 6.

    Are you sure you have a 2G? A 1G can only go to 2.1 via iTunes but a 1G can go as high as 3.1.3 that you get here:
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
    Identifying iPod models
    To If you do have a 2G that can go to 4.2.1 by:
    iTunes: Backing up, updating, and restoring iOS software
    For 4.2.1 you need iTunes version 10.X and that requires OSX 105.8 or later.
    If you have 10.4.11 you can only go to iOS 4.1 since that OSX can on go to iTunes 9.X

  • SourceFire is not updating the data

    I am currently running Virtual Defense Center 64bit, v5.2.0 ( Build 838), Sourcefire Linux OS 5.2 (build 135).  We have the Defense Center and one device ( 3D7010).  The system was working fine until we changed the password on the Shell account on the Defense Center and the device, both were also rebooted.  Now the data in the Defense Center is not updating.  It appears via the syslogs that everything is working correctly, except for the transfer of data from the device to the Defense center.  I am pretty sure I need to update the password some where in the Defense Center for data updates to resume, but I can't seem to find it.  The device is showing green under device management.  After reviewing the syslogs, the device is not seeing the heartbeat from the SFDC.
    We are getting the following results:
    Nov 28 2014 09:45:05 Sourcefire3D sudo: pam_unix(sudo:session): session closed for user root
    Nov 28 2014 09:45:05 Sourcefire3D sudo: pam_unix(sudo:session): session opened for user root by (uid=0)
    Nov 28 2014 09:45:05 Sourcefire3D sudo: pam_unix(sudo:session): session closed for user root
    Nov 28 2014 09:45:05 Sourcefire3D sudo: pam_unix(sudo:session): session opened for user root by (uid=0)
    Nov 28 2014 09:45:05 Sourcefire3D sudo: pam_unix(sudo:session): session closed for user root
    Nov 28 2014 09:45:05 Sourcefire3D sudo: pam_unix(sudo:session): session opened for user root by (uid=0)
    Nov 28 2014 09:45:05 Sourcefire3D SF-IMS[2208]: [2243] sftunneld:sf_heartbeat [INFO] Received message for not published Malware Lookup Service for peer 128.132.7.42.
    Nov 28 2014 09:45:01 Sourcefire3D SF-IMS[2229]: [24225] Event Streamer:ConnectionHandler [ERROR] SFTunnelConnect returned 24: Not connected
    Nov 28 2014 09:45:00 Sourcefire3D SF-IMS[2162]: [2162] pm:process [INFO] Started store_whitelist_history (24224)
    Thank you in advance for your help.  Mark.

    Opening a ticket with Sourcefire's support department should help you resolve the issue very quickly.  

  • Report is not pulling the data from multiprovider in BI 7.0

    Hi BW gurus,
    We have upgraded our BW systems from 3.5 to BI 7.0.
    According to our requirement we did some modifications(added some new cubes) to existing multiprovider. All the objects and assignments looks good in the multiprovider.
    We are facing a problem while executing the reports, report is not pulling any data from the particular multiprovider but I can see the data from the multiprovider.
    For any selection creteria we are getting the msg like "No applicable data found".
    Created a sample query with only two chars and two KF's no conditions, no exceptions still the report is not populating any data for any selection creteria.
    Appreaciate for your help in this regard.
      -BK

    Hi
    Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
    GTR

  • Export is not exporting the data from Page. It always gets the data from VO

    Hi,
    I have got a critical issue, where I am Not able to export the current data from the page.
    I have an export button and the VO is attached to it.
    1) My page will execute the VO and I do some calculations to remove some rows, add the grand total etc.
    2) The export button just re-executes the query and exports, which is not that, I want. I would like to export the current contents of the VO, which I manipulate and it is shown on the page.
    To give an example -
    My VO query is executed, when I click the Report button. I then adds Grand Total row to the VO and it gets displayed on the Page also.
    Now, when I click the export button, it just exports the data which is coming from the VO SQL query, whereas I want the data from current state of VO i.e. with the grand total, which I added and is coming on the page also.
    I will be really grateful, if someone can help me with this as it is really urgent.
    Thanks for your help.
    Shiju

    Hi Shiju,
    Is the export to csv opening fine with the data showing in individual columns when opening from internet explorer. What version of IE are you using? For us the export works fine from Firefox but does not work well in IE. From IE, the data shows with the commas in a single string. Appreciate your response as it will help us understand if our issue is local to our environment.
    Thanks.

  • KE30 is not picking the data from summarization level

    Hi Techies,
    We are facing one issue in KE30 tcode.
    We are able to run the same report in our QLTY, its showing "Data is getting fetched the data from summarization level 33" and we can see the output within 5 mins, But if we use same parameters in PRO, its showing "Data is getting fetched from segment level".
    So we are not getting data in PRO, its throwing TIME_OUT error....
    Request you to suggest how we can map these summarization level to the particular report.
    *We have already rebuilt and refreshed the summarization levels, then also it is being picked from segment level.
    Thanks in advance,
    NIck Loy

    Hi,
       In KE30 right click on the report. Click on change. Go to the options tab. In the performnace block check if radio button "use a summarization level" is selected.
      If the customizing is correct then the select stamenet generated by the report may not be in sync with the summ level i.e. the chars in the selection of the report must be there in the summ level.
    regards
    Waman

  • XI Adapter Engine Not picking the data from FTP Server ?t

    Hi All
    We have upgraded oracle in our landscape
    from 10.0.2.0.2  to 10.2.0.4.0
    we have Redwood System , which runs the interfaces
    Redwood initiates Our Satellite  XI  system to pick  the data from the ftp server
    but after the upgrade , it is not able to pick the data from the ftp server .
    when checked in the Satellite XI Adapter engine getting following error
    "XI Engine Error occurred while connecting to the ftp server  java.net.socketException:Connection Reset"
    but we are able to ftp from Satellite XI Adapter engine to  ftp  system manually  but why Satellite XI Adapter engine is not the
    picking the file (ie data) from the ftp server.
    Immediate Response  is highly appreciated
    Regards
    Edited by: sidharthmellam on Nov 23, 2009 11:54 AM

    Hi Sidharth,
    Please give me the FTP connection parameters mentioned in the channel.
    Did you try stopping and starting the channel ?
    If not please stop and start the channel.
    Also catch the default trace and paste it.
    Cheers...,
    Raghu.

Maybe you are looking for

  • Connecting a Vista notebook to an iMac using airportcard

    I have an iMac running Tiger with an airport card installed. This is connected to the internet with an ethernat cable. Until recently, my wife had an iBook with airport card and was able to connect wirelessly to my iMac to print, share files and conn

  • Install windows 8 on an existing arch installation

    Hi Friends, I don't know if this is the correct place to ask but after many hours of googling, I am asking this question. I had two operating systems installed on my computer which I dual booted with grub: Windows 7 and Arch linux (Archlinux is still

  • Substring in Bex

    Hi Is creating substring of a characteristic value possible in BEx. I did check other posts but the answers weren't satisfactory. Please let me know the process to do the same. Apart from this, is it possible to identify the number of records in a cu

  • STO - Most Urgent

    Hi Gurus In Import process, we have received the material at Port plant ( which is a non excisable), from port plant we are doing STO to respective plant, when I am doing the goods issue, all the duties including that of CVD, Ecess on cvd, Secess on

  • SPH200D System Start up Screen

    I just got a SPH200D, it worked fine foe a few days, then the screen just says System is Starting up.  I have tried reseting the handset, removed the batteries yet the same message.  Can anyone help!!