Main viewer mode affects browser mode but cannot be switched in browser mod

The main viewer modes - specifically Multi and Stack change the selection and navigation operations of browser mode, but cannot be adjusted in browser mode.
For example, if the main viewer mode is Stack mode, then the stack pick is green, the motion left and right cursors do nothing (beep), and multi-selection is not possible. While this is useful if you want to do stack operations, it's annoying if you don't, and it's not possible to switch to multi-select off without either going to the main viewer and changing it, OR (oddly) double clicking on a non stacked image and that goes to the main viewer AND changes it.
Ideally you should be able to switch main viewer mode even when you are in browser mode.

The main viewer modes - specifically Multi and Stack change the selection and navigation operations of browser mode, but cannot be adjusted in browser mode.
For example, if the main viewer mode is Stack mode, then the stack pick is green, the motion left and right cursors do nothing (beep), and multi-selection is not possible. While this is useful if you want to do stack operations, it's annoying if you don't, and it's not possible to switch to multi-select off without either going to the main viewer and changing it, OR (oddly) double clicking on a non stacked image and that goes to the main viewer AND changes it.
Ideally you should be able to switch main viewer mode even when you are in browser mode.

Similar Messages

  • B 590 broadcom wifi active but cannot be switched on. Fn F5 switches airplane mode :(

    My B590 from June 2014 was delivered with W8 but my dealer exchanged it for 7 home premium on purchase date and with that my wifi always worked fine.
    I got 8.1 on a stick in case I wanted to upgrade which I now did (and already regret, what a piece of MS junk!).
    Problem: the usual Fn F5 switches airplane mode on/off and the switch for wifi which is located beneath is always GREYED and OFF. Bios checks OK, Wifi is on, driver is installed OK and update say latest driver already installed.
    I tried to go back to the W7 driver but I cannot change the driver - even if I de-install the original driver the installation of the new one breaks at the last stage. I have also d/l the latest from lenovo but that only comes as exe file, I can not manually extract the inf file from it.
    what to do?
    regards
    Gunnar Kossatz

    Hallooooo!!!!  nobody??  what kind of support is this? this is a LETHAL "feature" !!

  • I am able to play rental movie on iPad but when I switch to tv it is frozen and I can't get play to engage

    I am able to view rental movie on iPad but when I switch to Apple tv the picture is frozen along with the play button

    you are probably seeing the extended display.. to see ur main display go to pefrences then display steeings and turn mirroring on.
    this will display ur mbp main screen. good luck.

  • I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this.

    I have a lot of various book mark folders with websites contained within each folder. I am able to sort the websites within each folder alphabetically by name but I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this other than manually dragging them as this is extremely hard for me due to the fact that I am a quadriplegic with limited hand movement dexterity

    Bookmark folders that you created are in the Bookmarks Menu folder. "Sort" that folder.
    http://kb.mozillazine.org/Sorting_bookmarks_alphabetically

  • Can't view data in browse mode.

    I have a database of about 50 records I can view the data in list mode but when I switch to Browse the page turns grey. I trashed the preferences but no improvement.
    Any help?

    Hello
    - 1 - AppleWorks will NOT be updated. It will be replaced by iWork.
    - 2 - If you wish, you may attach your file to a mail and send it to:
    koenig then a dot then yvan then an @ then tele2 then a dot then fr
    If you do, I will be able to look if the file is working well on another machine.
    So you will know if the oddity is to be searched in your machine itself.
    Yvan KOENIG (from FRANCE mercredi 21 décembre 2005 9:12:42)

  • Upload functin works in Edit mode but not in View mode

    I am using the Oracle AS 10g PDK to integrate struts application into Portal. I found the upload function works fine in portlet edit mode, but it doesn't work in view mode (Go to the "The page cannot be found" and URL is "http://servername/portal/page"). Does anybody know the reason.

    Hi there
    Can you post a screen capture of what your Timeline looks like?
    Odds are your Click Box is pausing in a weird place.
    Cheers... Rick
    Helpful and Handy Links
    Begin learning Captivate 5 moments from now! $29.95
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • Imports not displayed in browser view mode

    Why are my photo imports displayed as black images in browser view mode?

    Not sure on your version but right click the member and select "View member properties", it should display a property window and attributes will be in there.
    There is also the atrribute viewer
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Remote front panel with viewing mode in monitor jams if two browser connects

    I made a exe with the vi attached, with the web publishing viewing mode set to monitor every 1s.
    I copy all the executables and generated files to a target computer. The target computer is 4 CPU 2Ghz, 1Gb RAM, Windows 2000.
    If I open a client web browser connection to the remote panel, everything is fine, I can see updates every 1s or so.
    But if I open two client web browser connections, the display in the two web browser grinds to a halt, and the exe in the server computer slows down from 1s update to 6s update.
    If shut off one client web browser, the other client browser and the exe in server go back to normal speed.    
    So what is the problem? How do I solve this problem? Is this problem solvable?  
    Attachments:
    monitor4.vi ‏85 KB

    Bump. 

  • Yellow Boxes around type in normal view mode but not in preview?

    There are these yellow boxes that appear around type when in normal view mode, but when in preview mode it disappears.....any idea of what I can do to alleviate this issue? Here is an image of the problem....  

    This link should explain it:
    Field Guide to Composition Highlighting | InDesignSecrets

  • I can't take a video in camera mode.  I have the words video, camera and square down the right hand side of screen but cannot activate video? Any ideas?

    I can't take a video in camera mode.  I have the words video, camera and square down the right hand side of screen but cannot activate video? Any ideas?

    Swipe up or down to select options.

  • Works in Main Application mode but not the orange NXT mode for some NXT's

    A simple Labview program designed using only NXT VI's worked  in the Main Application but not in NXT mode.  For some NXT's it  worked in both modes but for others, just in Main Application mode. I've tried  updating the firmware and plugging and unplugging the USB.  Any thoughts?

    I see. The problem is probably that when you are switching to the NXT Target mode, it is expecting to target the other brick to which you already deployed. If you right-click on the orange banner menu in the lower left corner, you should be able to select the other NXT, or use "Find NXT..." to scan/search for bricks.
    Also, I reccommend giving all your NXTs unique names so this is more obvious. (you can use the NXT Terminal tool to do that).
    If you still can't get the VI to run in target mode, restart labview.

  • TS1702 I purchased the app Word Lens but cannot get it out of demo mode.

    I purchased the app Word Lens but cannot get it out of demo mode.

    Hi bellref, I'm one of the creators of Word Lens.
    Once you download Word Lens for free, you can purchase language packs by tapping the language bar at the top of the screen.  We currently offer Spanish, French, and soon Italian.  If those are not on your list, let us know which you'd like to see.
    You can also chat with us at [email protected], or contact us on twitter!

  • Trying to print 4x6 photos.  How can I print with no borders on LR5 with my HP OfficeJet 7410?  Even when in Print mode in LR5, my photos show a border.  Page Setup shows "borderless".  Image Settings show "zoom to fill". But cannot print, nor even previe

    Trying to print 4x6 photos.  How can I print with no borders on LR5 with my HP OfficeJet 7410?  Even when in Print mode in LR5, my photos show a border.  Page Setup shows "borderless".  Image Settings show "zoom to fill". But cannot print, nor even preview, without borders.

    JimHess~  Many thanks.  In my short history with LR, it's amazing how many people I've seen ask this question.  I'm nearly embarrassed at how simple the fix was, but grateful that you didn't dismiss such a basic question.  You made my week.  And my friend's photo album...

  • Browsing Websites while in Presenter View Mode?

    Hi,
    I am doing many presentations where I have to comment on the content of websites and I have been using a lot the Web View feature, which I love. However, I don't seem to be able to do it while on presenter view mode, since I can't click on the slide to open the browser; it will just go to the next slide.
    Is there any way of doing this (apart from using single screen mode)? I am very comfortable on Two Screens mode and I don't want to go on One Screen mode just because I have to show a website online...
    Thanks
    JL
    Powerbook G4   Mac OS X (10.4.6)  

    Thanks. This actually work as you said, by clicking on screen 2.
    However, in most cases this may not be very useful...since you have to browse the website also in screen 2, which most times will be behind you, and if it's big it will be hard to read and many links will be hard to reach...
    Anyway, I imagine there is no other way and what we need is another feature for Keynote 4...maybe automatic switching from 2 screen to mirror when you browse a website?
    JL

  • Report server running in integrated mode , but cannot deploy reports again and again prompts for login

    Report server running in integrated mode , but cannot deploy reports again and again prompts for login
    Nur Mondal

    Hello,
    How are you deploying the reports? Via Visual Studio, Report builder or manually uploading RDL files?
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS

Maybe you are looking for

  • Hi getting error message when starting my computer

    Hi i have a Toshiba DX1215 with windows home premium. When i start up the computer and get to my desktop this error message is popping up. windows application error, the exception unknown software exception (0x40000015) occurred in the application at

  • HELP! Newbie: Unable to update fields

    Hello. I am teacher of a Java course and I am teaching Kodo JDO to my students. But I am unable to update my persistent fields to the DB. I have a persistent class Employee with two fields: name and wage. I have the following code: PersistenceManager

  • User Registration Process: Task Assingment for a Self-Request User

    Hi guys, Doubt: In the User Registration Process Can I configure the Target User's Manager as the Assignee of the Awaiting Approval Data? I understood that I can do that because the user has not been created yet. Does it make sense? I need to send th

  • SAP Fiori BW on HANA scenario / Simple Finance

    Hi All, I'm contacting you because we are in front of a completely new scenario. We have an important doubt regarding our landscape configuration, and the applications which can be deployed on it. At high level, our landscape has an SAP Business Suit

  • Contact Apple?

    Does anyone know how to go about contacting apple directly by e-mail? I am trying to figure out how to charge the battery for my ipod mini and it was only able to charge once. I have only had it a couple of weeks and cannot seem to find any help. I p