Main Window display when line items are less in next page.

Hi all,
In the smartform,if the line items extend to second page, then to print complete main window in second page and if there are only few line items in second page, how to remove the empty spaces in the nmain window and to print other windows after the end of main window.?
Nagesh

design ur next page .....
goto next page reduce the size of the main window and place the other window that u need....
goto new window that is specified in nextpage , in condition tab check the checkbox(only at the end of main window).....
here u will get the other windows only in the lage page....

Similar Messages

How to display line items twice in a single page in sap script

HI,
I am working on check printing. I copied the standard driver program and form to Zprogram and ZForm. Which are RFFOUS_C(print program) and F110_PRENUM_CHECK(Form Name).
I want to display the line items twice in the same page and sub sequent pages.
Currently I am able to display line items only once.
Example:
PAGE1.
line item1
line item2
line item3
line item4
line item5
line item1
line item2
line item3
line item4
line item5
line items 1 to 5 which are in main window.
How to achive this problem.
Regards,
vinod

Hi
I had the same request for a check form in Canada. I solved it by writing the line item output into variables and print these variables in a second window. It was ~10 hours of effort, not a real nice technical solution but it worked.
If you require I can send you a PDF of the sap script form definition. You can contact me at [email protected] Answers can take 1 week or more.
Best regards
JD

TDS line items are not Display in FB60

Hi Experts,
when in simulate a document in T code- FB60. the TDS amount is calculated properly . DR , Cr is ok but the Line item of the TDS is not displayed. when i post the document and open in FB03 all line items are dispalyed with TDS Line items also.. Proper Tax code of payment and invoice is attached.
why not shown in FB60 when simulating a document??

Hi
If in FB60 you want to simulate tax items also, click on simulate from menu, you will be able to see the required details. If you click on simulate icon, it will not be visible.
Regards
Sanil Bhandari
<a href="http://www.vcq.biz/">nature wallpapers</a>, <a href="http://www.utorrent.name/">utorrent</a>f in FB60

Profit center line items are not displaying in KE5Z

HI Eperts,
we are executing tcode KE5Z. System is not displaying any line items. because we have missed out in configuration updation of line items and on line transfer check boxes activation in 1KEF.
please advise how we have to retreive whole data posted up to now under this controlling area..
Regards
vekat....

Hi Venkat,
Please check the following link.
[http://help.sap.com/saphelp_45b/helpdata/en/eb/1370e343c411d1896f0000e8322d00/frameset.htm]
Also check the tcodes 1KE8 (Transfer FI Actual Data), 1KEC (Transfer MM Actual Data) and 1KE9 (Transfer SD Billing Documents)
The path for these tcode is as under:
Controlling --> Profit Center Accounting --> Tools --> Prepare Production Startup --> Data Transfer.
Please check in your test system first.
Regards,
Sameer

How to not to display any line items for val flds values are zero in KE30?

Dear All,
In KE30,in one of my reports, i do not want to display such line items for which all values are zero for all val flds, it should only display the line items for which there is any value, i have tried Zeros hide in KE35 in formatting menu>other format>hide zeros, but unofrtunately it didnt came out.
Regards
Rashid
Edited by: rashinuet on Feb 20, 2012 4:38 PM

Dear Abhishek,
I have tried that as well in ke35 and made this option activated on my val flds like sales revenue for hide zero values, but it didnt came out as well, then in i tried ke32 change report >Extras menu>form settings, this adopts all the settings in the report from the form you have assigned, but this is not working, i am failed to understand what has gone wrong.
Regards

SAPscript MAIN Window ITEM TEXT Printing in NEXT PAGE

Hi,
I need to print the Item Text (Item Description or Column Description) if the Item Values (Lines) goes to the NEXT page in the Form. I have TEXT ELEMENTS defined for ITEM TEXT and ITEM VALUES in the MAIN Window. There is no issue with Printing the Item Text and Item Values in the FIRST Page. But in the NEXT page only when the Item values are printed (Item lines in excess of FIRST page), ITEM TEXT needs to be printed before printing the ITEM VALUES. If the FROM goes to NEXT page but not the Item values, then ITEM TEXT need not be printed in the NEXT page. The number of lines in the MAIN Window is different for both pages (FIRST & NEXT). I am not sure how to get this done. So, please provide me with a suitable solution to get this done. Appreciate your help in advance.
Thanks,
Kannan

Hi Kartik Tarla,
Thanks for your reply. Printing item lines between PROTECT / ENDPROTECT, will lead to Print all the line item together in one page. That is not I wanted. It the line items flows to NEXT page, I need to print the Item Header/Item Text. Otherwise, NEXT page should not have the Item Header.
Thanks.
Kannan

Line items are not appearing in F-32

Dear All,
There is one unique issue that is being arised in our system where in the open line items are appearing at the time of customer line item display, but when we go for clearing these line items only some documents are appearing and some documents are not appearing at all.
Is there any reason that documents does not appear while clearing where in still the same is appearing as a open line item in customer line item display.
Regards,
Rupa.

hi,
as seen from above mails,
entries are existing in BSID table
entries are passed as part of period end closing entries
entry passed in month end and reversed in next month
proposed sol
1. check the mode of passing the entry in tcode
if tcode is coming from FBS1 the entries will not appear in F-32
if 1 entry in FBS1 and other entry in F-32 then automatic reversal entries were not passed.
there was manual entry.
that is the reason 1 entry in FBS1 and other in F-32.
Thxs,
GB

PO will not print if line items are trash-canned

Hello,
We have an instance where we had to cancel both line items on a PO. However, the system will not allow a printout, since there are no line items. How can we get a printout to send to the vendor to confirm that both line items are cancelled? Config looks right. Deletion is a change relevant field, but the system displays a message when trying to print 'no print relevant information changed'.
Please advise.
Thank you.

Yes. We get change messages when qty or delivery date is changed, but for some reason, when you delete all line items, it doesn't generate any change. The checkbox is not checked therefore we can't print. If only 1 item is deleted, then it's OK, but if you delete all items, no printout.

Smartform main window with grid lines...

Hi Gurus,
I am printing the line items in the main window using grid lines of pattern. This main window can print 10 lines only. Here my requirement is i need to get the empty grid lines till the window ends after finishing the printing of all line items.
for example if it has only 2 lines then i need 2 lines of data and remaining 8 lines should print empty grid lines.
this table control have 14 columns. some times 2 lines of data occupies 3 lines. because any column value may be morethan of column width. for this type of example i have to print empty lines 7 only. because any item line occupied 2 lines.
hope it is clear.
Regards,
Vijay

Hello Vijay,
In order to do this you could make a template(the outlines of your layout). This template must be in the main window, so if there are more than 11 lines the complete template will be printed in the second page.
If you require a total box at the end of the template then make a new window fill only the value and the total will always be printed in the box..
Let me know if the solution is not clear. I shall explain in more detail.

Vendor Display/Change Line Items

Vendor with Debit balance
Dear Friends:
In FBL1N - Display/Change Line Items, How to indentify vendors with debit balance and How to identify vendors who has to be paid and why are amounts showing with - sign?
Please explain.
Thanks&Regards
MSReddy

Hi,
You can identify the debit balance by checking the amount with positive value. Or you can also select "debit/credit" indicator in the screen layout. when the layout come out, you'll see "H" representing credit and "S" representing debit.
Regarding second question, normally the line item that still need to be paid is identified as "open item" (red color", and the amount that has been paid as "cleared item" (green color).
Even the amount already paid, it will still sign negative, but you can see the "clearing document" number as the payment or clearing document.
Note that, the assumption on the above is that the payment of outstanding vendor is using clearing procedure.
regards,

FBCJ LINE ITEM AND FI LINE ITEMS ARE DIFFERENT

Dear Expert
FBCJ LINE ITEM AND FI LINE ITEMS ARE DIFFERENT

Hi,
It seems from the screen shot you are seeing different documents as in the first screen shot it clearly shows you have booked the multiple expenses under one see the below screen shot we have circled it
whereas FB03 screen shows different.
You can do one thing click on circle item and check the expenses involved in it and accordingly go to FBL3N and display documents for that G/L for the date 05.04.2014.
Hope your issue has been resolved else revert.
Regards,
Tejas.

Line items are missing during transferring ITS to EBP--tricky problem

Hi,
We are using EBP 2.0 version.
Some shopping carts line items are missing while transferring shopping cart data from ITS to EBP.
This is happening randomly.we had checked all the shoppping cart related tables in EBP.
For example in my shooping cart 4 items are there,during transferring shopping cart data from ITS to EBP all 4 items are updating for all the shopping cart related tables except account assignment table.
In account assignment table for this particular shopping cart only 3 items are updated except first one.
This is happening randomly for few of the shopping carts that too most of the cases first item of the shopping cart was not updating reqacct table(this is account assignment table for shooping cart items).
I have debugged entire scenario,but i couldn't find the problem.
any one could you please advise me....why this is happening?whether it is a version problem?
Thanks,
Ravi

Hello Ravi,
I guess you already checked OSS notes for this.
Have you checked in the area of ITS ?
When ITS sends data to EBP, only the actual screen data is sent:
- item procurement data from basic data
- item accounting data from accountig tab
then this data is used to update the SC.
If you have debugged those 2 screens, you should see what is happening.
You say that only 3 reqacct lines are updated: does it means that you have the 4 lines previously created, or only 3 ?
If you change one line item quantity, you should see this updating the reqacct. Same if you go directly in accounting tab.
Finally, there are two options:
- this is an ABAP error, so you should catch it in debug
- this is an infrastrucute error (ITS is not sending the data), so you should get the data sent by ITS in debug mode
Sometimes in productive environment with an heavy loaded ITS, you can loose some data. Available memory is not enough to fill in correctly ITS session containers.
Rgds
Christophe

2LIS_02_ITM deleted line items are not reflected in BW

Hi,
Our current Data flow 2LIS_02_ITM-->DSO-->CUBE.
I am analyzing a Invoice, When it is created 01.04.2014 it has got 10 Line Items and all the data is load to BW,Invoice with 10 Line items.
In ECC I can now see the same Invoice only got 5 line items and from change log I can see 5 line items are deleted on 15.04.2014.These changes are not reflected in BW.In BW invoice data still shows 10 line items.
If I perform setup table job and ECC RSA3 for that invoice I am getting only 5.
I believe it’s something to do with 0RECORDMODE,Can you please let me know how to fix this in BW.
Thanks

Yes this is a known behavior in case of deltas.
For Deleted line items Rocancel field will have an entry with R.
To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
Regards,
AL

Few line items are not coming at the time of creation of delivery

Dear Experts,
When the user creating the delivery few line items are not picking in the delivery document
the following checks i verified,
Stock is available
shpping condition is differ from sold to party and sales document
Plants are same for all the line items
why the few line items are not coming in the delivery document creation,
please help me to sort out this issue
Thanks and Best Regards,
Muralidharan S

Hi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa

Line items are not summarized due to taxes

Hi Friends,
According to note no:36353,I maintained settings in OBCY and sales revenues,deductions are summarized if my billing document(VF01) having above 999lineitems.But if my customer is liable for taxes, then revenues,deductions are not summarizing in accouting document if line items are more than 999 and I am unable to release it to accounting(VF02).
Can some one please advice me.
regards,
Seetaram

HI,
In my billing document (customer is liable for taxes)I have two tax condition types, one is JR1 & UTXJ, but both conditon type values are ZERO.So zero value is not posted to any G/L account.But my issue is when these two conditon types are appearing in billing document, I am unable to release billing document (VF02)to Accounting if more than 999 line items are there.
If above two conditon types are not there ( it customer is not liable for taxes)in billing document, I am able to release billing document to accounting if line items are more than 999.
someone please advice me.
regards,
Seetaram

Main Window display when line items are less in next page.

Similar Messages

Maybe you are looking for