Main window of triggered page ( thr' COMMAND ) is not getting triggered.
Hi,
My requirement is as below -
I have 3 pages in smartform
FIRST page - next page of it is SECOND page
SECOND page - next page of it is SECOND page
and I have last page ( LAST_PAGE ), which is getting triggered for 1 of the condition.
Here, my main window in LAST_PAGE is not getting triggered; Can anyonw please advice on it.
Hi,
If u have used Main Windows only then u can place the Command Node in First Page Itself after the command node 1to First ---> Second Page Trigger your Text nodes etc and again The Command Node 2 Second to Third based on condition else the same second page. Mainwindows will be accessed as specified in first page only .
IF secondary or other windows have been specified
Place the Command Node in the Second page and also add the Condition to the Command node the condition to get to last page.
Regards,
Vijaya Lakshmi.T
Similar Messages
-
How to display standard text element of main window in next page
hi all
In scripts we have standard script medruck for purchase order.
i want to pull text elements ( terms and payment terms ) in to main window of next page.
i have included main window in page windows of next page ,but im unable to print text elements of terms and payment terms in next page...
any one give your valuable inputs.
Thanks
deepika.Hi deepika,
First copy standard MEDRUCK to ZMEDRUCK and do the necessary changes.
Then check in driver program when exactly Terma and condition text element is called. Generaly its after printing all items but just check once to confirm.
If TERMS and condition element is called ate end just put a NEW-PAGE command at end of the text element which is called before terms.
Hope this will help You.
Thanks
Dhiraj. -
The main window of third page will not display the text element
Hey, smartform guru,
I am working on the smartform to print PO data.
The smartform has first page and next page as usual.
I created a third page P_TERMS to print the terms and conditions for PO printout.
I used commend node to assign the page P_TERMS as the "Go to new page" and it did go to the P_TERMS page but the text element will not print in the main window in P_TERMS page.
The text element will print in the secondary window.Since the terams and conditions are 4 pages long, I expected it to print in the main window, so I do not have to define several extra pages to print them.
Any idea?
Thanks in advance!
Fisher LiHi Fisher,
Unfortunately, In a smartform, only single main window is continued to all pages even though you can declare windows under each page as main window, but it actually acts as the same window for all pages. It just means that if text from 1st page is overflowed, it will continue to the next page with main window.
Command line to go to next page will create an extra page but since text is not flowed in main window, it won't print the text element you have included in main window on third page.
The solution to your problem as I see is that either you include your terms and conditions in the main window of your first page and just before your text element for T&Cs, use Command to go to third page.
Hope it helps.
Ravi -
How can I create more than one main window in a page of SAP SCRIPT?
How can I create more than one main window in a page of SAP SCRIPT? If anybody helps me I will be obliged.
Regards,
SubhasishHi Ganguly,
It is possible to have more than one main window in a same page.
You create a main window and simply you copy and past it in the same page.. it will create first main window name as MAIN and other main windows as MAIN01,MAIN02.... up to MAIN99.
Contets flow from MAIN , MAIN01, MAIN02.......................MAIN99. contents after filling the current window it flows to next window(by default, you skip as well with some keyword not sure could be NEW-WINDOW)
you want print the main window data twice? or you want to create two main window in the same page ?
1. give two copies in the no of copies in the output type screen ( Which pop up is coming after excute the program ).
2. create two page with the same script form.
3. you can write the coding inside the program to print twice the same page.
Hope this information use full to you.. -
The main part of the safari page is grey and won't respond/can't type in any commands. I can move back through the previous pages, and even open new ones via the URL, but can't get onto the main part of the page and I can't get onto the 9 page option. !?
Help, please.Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Hi gurus in scripts i want to display more then one main window on the page
hi gurus in scripts i want to display more then one main window on the page how it is to follow any body explain to me plz.
Hi all,
I am printing check printing from F110 with Z-form and it has been assigne to FBZP also..
My client need to print the check information twise that means main window data two times.
like this:
First main window. : invice# amt amt
9002 4000 4000
9005 5000 4000
Al so they want like to print same in down part of the main window.
First main window. : invice# amt amt
9002 4000 4000
9005 5000 4000
For this i have created instance main window of main window like MAIN 01, but it is not displaying the data in instnce window data
in the instance main window.
Question: Could you please let me know abt the same or good solution. How to cal main window instance , i tried with
/: NEW-WINDOW in instance main window part but it also appering in main windoe also.
could you please let me know how to call instance main window or any other solution to get teh data like my example above.
thx -
AT USER COMMAND is not getting triggerd
Hi Techie's
I have two fields on the selection screen
1) Name: ___________
2) Id: ___________
I have some buttons say on the Application toolbar say::
Save Delete Modify Exit
I have created these buttons in the INITIALIZATION event.
I am using AT Selection Screen OUTPUT for some logic purpose.
Later I am writing AT USER COMMAND and pressing SAVE The function code for SAVE is "SAV".
But the drama is that AT USER COMMAND is not getting triggered at all.
It goes first to Initialization--->At selection Screen OUTPUT>Then screen appears> I give the values and press the SAVE button--
again it goes to the At Selection screen OUTPUT.
Not even getting the hang of it. Please help if anybody know the story of it.
ITS SO URGENT.At user command is for list processing, you need something like this:
Pushbuttons in the Application Toolbar
In the application toolbar of the standard GUI status of the selection screen, five pushbuttons are predefined with the function codes FC01 to FC05, but are inactive by default. You can activate them during the definition of the selection screen as follows:
SELECTION-SCREEN FUNCTION KEY i.
The numbering i must be between 1 and 5. The individual function texts must be assigned to the functxt_0i components of structure sscrfields before the selection screen is called. You must declare this structure as an interface work area using the TABLES statement.
If the user chooses one of these buttons, the runtime environment triggers the AT SELECTION-SCREEN event and the function code FC0i is placed into the component ucomm of the structure sscrfields.
After the AT SELECTION-SCREEN event has been processed, the system displays the selection screen again. The only way to exit the selection screen and carry on processing the program is to choose Execute (F8). Consequently, the pushbuttons on the application toolbar are more suitable for controlling dynamic modifications of the selection screen than for controlling the program flow.
REPORT demo_sel_screen_function_key.
TABLES sscrfields.
PARAMETERS: p_carrid TYPE s_carr_id,
p_cityfr TYPE s_from_cit.
SELECTION-SCREEN: FUNCTION KEY 1,
FUNCTION KEY 2.
INITIALIZATION.
sscrfields-functxt_01 = 'LH'.
sscrfields-functxt_02 = 'UA'.
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
WHEN'FC01'.
p_carrid = 'LH'.
p_cityfr = 'Frankfurt'.
WHEN 'FC02'.
p_carrid = 'UA'.
p_cityfr = 'Chicago'.
ENDCASE.
START-OF-SELECTION.
WRITE / 'START-OF-SELECTION'.
This defines a standard selection screen with two parameters. In the application toolbar, two pushbuttons are assigned the texts LH and UA and activated.
When the user clicks one of the buttons, the AT SELECTION-SCREEN event is triggered and there the input fields are preassigned correspondingly. -
Since goimg to 4 firefox i get a message that the command is not getting to the program pogo
since i updated to firefox 4 i get an error message that says the command is not getting to the program. That is for pogo only i have no problem elsewhere. I would like to ask how to reset my firefox homepage after someone has changed. It is firefox for yahoo.ca
You can use your iPad worldwide. However, each AppleID is tied to
a specific country's store. To use the AppStore in any country, you
must be in that country and have a credit/debit card issued by a financial
institution in that country with a verified billing address in that country.
It is the developer's choice which AppStores he makes his app available
from, and some countries prohibit certain apps.
To make a purchase from the US store (including downloading a free app
available in the US store), you must be in the US and have card issued
in the US with verified billing address in the US.
You can use your purchases from the SA store worldwide, but you
cannot make purchases in other than the SA store unless you meet
the aforesaid conditions. -
I'm trying to print halftones to a wide format Savin 2404 WDP printer.
I can select the halftone desired in the output window and select Separations.
I do not get a halftone dot output but instead I get shades of grey. HELP.That worked really well (Resolution and Halftone screen Lpi, Angle and Dot shape).
My only issue now is when art is created in Illustrator CS6. I can't get those results for gradients.
I guess I would need to bring those files one color at a time back into photoshop.
Keep me posted if you have any other thoughts.
Thanks again. -
Main window of different pages in script
how to put different data in main window of two different pages?
please reply quickly,its urgent.
thanks in advance.Hi,
you can try using 'IF' conditions by checking the &PAGE& variable or check if next page is getting triggered using sap counters available in teh table called SAPSCRIPT or call any particular text element from teh print program if there is a page break etc
Regards,
Simmi -
How to skip secondary window below main window to next page.
hi friends,
this is tax retail invoice in which main window contain a table where the items are listed
as the items increses. the remaining items get listed on 2nd page thats ok..but the calculation part as total get
calculated on both page in secondary window
below main window
tried with command with go to next page
plse suggest.soon...urgent.
thnx in advance.Put a condition on this secondary window for totals. Flag the checkbox 'Only after end of main window'.
Cheers,
Edwin. -
How to use Different Main Windows in Multiple pages to print internal table
Hi experts,
I have a problem regarding how to have multiple different main windows in smartforms..the problem is that i want to print an internal table in the third page of the smartform and that table can have dynamic values ..sometime it may have more than 400 values also which can not be printed in one or two pages ...
so to accomplish the same what i did was..
i tried creating a new main window in the third page but it is throwing an error saying two main windows not allowed and i also tried by copying the first page's main window but it is just repeating the same content what was there in second page..
i also tried by creating a secondary window in the third page and in that window i tried giving my internal table and tried by giving the next page to itself but that also is not allowed and it throws an error saying a page without a main window cannot point to itself as a next page....
i also tried using a secondary window and in that window i was trying to display the internal table but it is only showing third page content and fourth page itself was not created....although in my next page field value of the third page , i have given the third page itself as a next page ....but this also is not working ,.....
please suggest how to have different main windows(not copy of first main window) in smartforms in order to display the dynamic contents of an internal tableHI ,
Just check with your smart styles with assigned paragraph allignment .
Try to create character style with your required font ,size and Allignment .
Hope u this will solve your issue .
Let me know if any concerns......
Regards,
Lokesh -
Smartforms: Creating main windows in different pages
Hi all!
I am using smart forms, I tried to create 2 main windows in 2 different pages. I keep getting the following error: "Two main windows are not allowed." However, I have already seen an example where there are 2 main windows created in 2 different pages. Does anyone know of you how to solve this?
Thanks for your help.
Message was edited by: Hajar BelahsenHi Hajar,
You cannot have two main windows. But the main window can be associated to as many different pages that you want.
Check the program where you saw that the code inside the MAIN window is same. They have actually associated the window with the page. This is what termed as page-window.
Give feedback.
Regards,
Deva. -
Need to print horizontal line at the end of main window in each page.
Hi,
I am printing a smartform with main window having 10 lines in footer. The problem I am facing is when the content extends upto two or more pages, I am not getting the horizontal line at the base of main window. For last page it is fine as it contains footer.
Please suggest how to proceed.
Thanks,
RKUHi,
If you don't have any frame set on your main window:
Go to output options and mark frames, and then go to details and uncheck checkboxes for above, laft and right, leving only below marked.
This will give you a line in the bottom of you main window.
If you dont' want to do this on the main window, can you create a new window placed at the bottom of the page and use this framing technic on that window. But in that case don't forget to mark the "always draw box and shading" checkbox. as this window contains no values, the will not get printed unless you mark this checkbox.
Regards
Åsa Thenstedt -
SAPSCript how to print a comment at the end of main window on first page?
In SAP Scripts, How do I print a comment at the end of the first page (I have several pages of data) in the main window?
- Venhi
good
yes we can put condition.....to display the footer window get printed after all data in main window gets over.........................assingn u r footer window to next page [ i.e u r second page] ...and write the condition
In such senario no need to use a window for footer.
In the Script form:
-> In the Main Window itself after all the main data create an Element.
-> Use BOTTOM and END-BOTTOM; write your footer information between them.
In your Driver Program:
-> After printing all the data (means after passing to form and before closing the form) call one WRITE-FORM with the footer element.
I'm sure it will work.
f u r not interested to change the print program. Then simply insert simple code in the footer wondow.
now insert this code in ur footer window
IF &TTXSY-PAGE& = &SAPSCRIPT-FORMPAGES&.
*all code in footer goes here.
ENDIF.
&TTXSY-PAGE& holds the page number of current page.
&SAPSCRIPT-FORMPAGES& holds total form pages.
This will work.
write this code then the footer will be printed in last page itself
/: IF &NEXTPAGE& EQ 0
whatever footer you want.
/: ENDIF
You need to create an element in the MAIN window. You can do it in two ways:
1. In SE71, you can create:
/:E FOOTER
/:BOTTOM
Text
/:ENDBOTTOM
In the print program, just call this element.
2. In you print program, populate parameter type = BOTTOM in FM, WRITE_FORM.
Ex.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'FOOTER'
type = 'MAIN'
window = 'BOTTOM'
EXCEPTIONS....
However, if you issue new page having new header data. Thus, new item data. And if it will exceed more than 1 page, the footer will still appear. To solve this, you need to create a new element in MAIN. Ex. INIT_FOOTER. It just contains the following:
/:E INIT_FOOTER
/:BOTTOM
/:ENDBOTTOM
Call this after passing all item data.
reward point if helpful.
thanks
mrutyun^
Maybe you are looking for
-
Fields not visible from custom WIW Infoset
Hello, a custom infoset version (ZZZHR_XX_PA_ESS) in ESS Who is who works with molga=15 to display user details, its manager details (starting form standard field syhr_a_p0001_af_omngr_nr) and assistant details. When used with both the WIW functon an
-
ORDDOC and context searching!!
We have a scenario in which client uploads file in the format doc,ppt,pdf into database and is stored as orddoc format. The version of database used in 9i. The client has a requirement in which he needs to search for a particular text inside the docu
-
Error during XI PCK 3.0 installation
Hi, I installed the WEB AS 6.40 prior to installing XI PCK 3.0. The WebAS 6.4 seems to work pretty well but when I try to install the XI PCK 3.0 I get the following error message: FSL-00001 System call failed. Error 32 (The process cannot access the
-
Two PGI in single delivery process
hi All., Two material document created (movement type 601) in single delivery process. pls very urgent to my client. lakshmanan
-
Can somebody explain me this?
Hi, In my recent project using the JavaServer Faces i discovered a problem with my project that i don't quite seem to understand. My bean function is called twice and i thought it would only be called once. Let me explain my problem. I created a smal