Main window (& source list) are somehow... gone! help!

something's gone wrong with iPhoto.
for some reason, when I turn it on, we do not get the basic iP main window (with the source list), we get a blank screen - I can then open the events page, but I can't get the standard first / main window.
so, as I can't get the source, list, I have no way to tell iP to transfer photos from the iPhone or even a camera - or anything in fact...
can anyone suggest anything?
w

renew your iPhoto preference file - A good general step for strange issues is to renew the iPhoto preference file - quit iPhoto and go to "your user name" ==> library ==> preferences ==> com.apple.iPhoto.plist and trash it - launch iPhoto which creates a fresh new default preference file and reset any personal preferences you have changed and if you have moved the iPhoto library repoint to it. This may help
This does not affect your photos or any database information (keywords, faces, places, ratings, etc) in any way - they are stored in the iPhoto library - the iPhoto preference file simply controls how iPhoto works - which is why renewing it is a good first step.
LN

Similar Messages

Hundreds of blocked cookies that used to be in my "exceptions" privacy list are now gone/erased. Where did they go? Where on my computer is the list?

Hundreds of blocked cookies and "allow for session only" cookies that used to be in my "exceptions" privacy list are now gone/erased. Where did they go? Where on my computer is the list? This list tooks years to accumulate and I tried to find the file that contained the list so I could save it or copy it but I never could. Is this list somewhere on my computer so I can restore it?

I found that after Firefox v29, a LOT of my settings and 
add-ons were changed / reset. Try this;
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
 While you are in safe mode; 
'''''Firefox Options > Advanced > General'''''. 
Look for and turn off '''Use Hardware Acceleration'''. 
Then check ALL of your settings. Browser and add-ons. Then restart.

Syncing Windows Contact List - Contacts Lost. HELP!!!!

I just replaced my older computer and of course updated the operating system to Windows 7. In the old XP environment Outlook Express was bundled and I used the Windows contact list and it synced flawlessly with my Iphone (3GS).
Well I just did my first sync using the newer operating sytem now running the Windows Live Mail that replaced Outlook Express and although I migrated my contact list to the new Windows Live, it won't sync with my phone, so all of my contacts are gone from my phone.
Can anyone help? Itunes and the Iphone won't recognize the Windows Live contact list? Thanks in advance.
Jeff

If you have no backup, or they are not stored on another program you are SOL.
Welcome to 2012. Where Electronic Data backups are common occurence. http://support.apple.com/kb/HT1766

WHY NO AUDIOBOOK ICON IN SOURCE LIST ??? HELP!

I recieved a few free audiobooks in magazines & cereal boxes! If I had the 'AUDIOBOOK ICON' in the source list, I could import the books straight to there!!!
Any wizards have the answers ?????

http://www.apple.com/itunes/audiobooks/
Right hand box 'iTunes 6 For Mac and Windows' fifth one down?
Thought it might only appear if you actually bought one from the iTunes store so got me one but no new icon.
Regards,
Colin R.

In my finder window the lists are all jumbled up.

I am using 10.7.5 on a MP. With a finder window open and displayed as lists the lists are not alphabetical. I used View>Arrange By> Name but the first letter of one column goes E,E,B,T,T,T,T,U,C,C,C. . . B. What is wrong? I recently installed a new 1TB drive and did an install of Lion and then did the updates.

now it is working?! Go figure. Yeah! Thanks anyway......

What are the disadvantages of maintaining the source list?

Hi,
I understand that once source list is activated for plant in customizations, it has to be maintained for all the materials which are extended for the said plant, Is it true? Can I maintain only for selected materials?
I also understand if it is maintained for material then, we can not create PO for other source for which it has not be maintained in source list.
Thanks in advance,
Satish

hi
There are no disadvantages if you maintain source list. Infact it helps lot of other functionalities other than purchasing. if you make source liost mandatory then it it required that for that particular material you need to have sourcelist in Txn ME01. You can have list of vendors who are approved and put all of them in the source list for the material. Yes you can always have independent sourcelist for a single material. Unless until you make it mandatory in customising there is no problem in PO creation. If you have made it mandatory and you wish to create a PO for a new vendor who is not there in Source list then it is not possible to create a PO. However you can add the new vendor in the source list and go on creating the PO.
Regards

No Source List, No Events List - no way to view stored photos

Hi, When I open iphoto, I see a gray screen and the only photos visible are the ones I downloaded in the last session. There is no tab for "events," no source list, no libraries tab, no way to access any previous events and photos. They are in there somewhere, because when I download again, photos that were stored on the cameras after they were previously download are listed as "duplicates."
First, why is this happening, and second, if anyone knows how I can gain access to my thousands of previous photos, how can I ensure that the "Events" tabs and Source lists are always visible? Help!
Thank you for your assistance, Mac geniuses!

I have just spent the last 4 days trying to figure out where the menu went. I have rebuilt my libraries several times. Gone back in the time machine, etc.. I was blaming my new installation of Snow Leopard and iPhoto 09. Boy do I feel dumb ... and thankful that I finally found your post.
= Bud Jones =

How to skip secondary window if main window goes to next page

hi gurus,
i m having a table in main window which lists items and its rate n quantity.
the total price,discount and discount is calculated in secondary window.
now if the list of item get more than window size it goes to next page but with calculation in both page in secondary window . i want to skip the calculation on 1st page.the calculation should only apear in scond page.
thnx in advance.

Hi..
******Case 1******************
Suppose if you want display the Totals only in Last page :
In the Secondary window:
/: IF &NEXTPAGE(C)& = '0'
<<DISPLAY YOUR TOTALS HERE>>
/: ENDIF
***********case 2**************
Suppose if you want display the Totals only in Last page :
In the Secondary window:
/: IF &PAGE(C)& = '2'
<<DISPLAY YOUR TOTALS HERE>>
/: ENDIF
reward if Helpful.

Hi Experts, can the secondary windows be processed after the main window?

Hi Experts,
at the end of the main window there is a command node and can the secondary windows be processed after the main window? thanks for your reply.
Kind regards
Dawson

Hello Dawson
No it can't Process the secondary window if you are calling a new Page in that command line.
Even if it gets called I don't think it will give the desired output.
Give it a try, But I am sure its not going to give you the desired output instead attach the command line to the end of your secondary window and in condition tab of secondary window check the check box "Only after Main window".
Hope this discussion was helpful.
Cheers,
Suvendu

Enhancement to bypass "Source not included in list despite source list req"

Dear Experts,
When the indicator source list requirement is maintained in the material master, the system will only allow creation of a purchase order if the source is maintained in the source list (t-code ME01). If its missing we will get an error message when creating or chaging PO with message :"Source not included in list despite source list req".
Is there a enhancement through which we can influence the error message for PO's of type stock transfter order? I tried searching for one but couldn't find a appropriate one.
Had look at ME_PROCESS_PO_CUST & ME_PROCESS_PO also but they were not much useful.
Thank You.
Best Regards,
SP

>
User General wrote:
> Hi thank you very much for your useful reply. My requirement is slightly different though.
>
> I have to avoid the error message not for entire plant but the plant and material number combination.Is there any customizing for achieving this.
>
> In this case if the same plant and material number is used but for different PO type like standard PO(type NB) it should still show an error message as standard.But if the PO type is stock transfer order(Y2UB) then error message to be avoided.
so what you actually want is: source list is obligatory for a combination of plant / purchase order type / material number.
there's no customizing this.
actually, i have difficulties in accepting your search for an exit/enhancement because the configuration of your system does not match your business process = why do you want to avoid an error message in case of a STO scenario where the source list entry is missing?? either you have defined source lists obligatory on plant level - then see to it, that the source lists are maintained in the plant (you can mass generate it using ME05) or it is not ... in which case you will have to train your users accordingly ...
please do not take offense - none is intended - but i wonder why one would make a thing mandatory, only to circumvent the obligation by (intransparent) programming.

Creation Info Record at Material group,Source List & Assign source to PR

Hi All,
Mine is a typical requirement, I would like to create a Info Record at Material Group level and create Source list for the Material & Plant combination. Now for this combination, I would like to create PR & assign source for this PR.
Completed at my end:
1. Creation of Info Record at Material Group level
2. Maintained Source List at Material level.
Issues/ Errors:
1. Info Record does not exist for the combination of Material & Vendor combination (which is true & I do not want it also)
2. Material differs from the Material from the Info Record.
Help / Information required :
1. Setting MRP relevant "1" for the Source List and for checking the field "Fix".
2. Assigning the Source in PR (in ME57)*Can anyone provide solution to the above
Can anyone please provide the soilution to the above points?
Thanks in advance for the solution.
Regards,
Pavan.

Hi Please create Contract and refer same while source list. This will help
Regs,
AD

Problem with sap script main window

Hi,
I am modifying the existed sap script. I added a box and some line items to the sap script main window.
Now i want to increase the size of the mainwindow.
Please guide me how to increase the lines of main window . I am unable to edit the standard attributes of the main window ,because all are in disable mode.
Please guide me how to increase the size of the main window.
Thanks in advance
Regards
Sudhakar

Hi,
You might be trying to edit the script in non original language. You can change the layout only in the original language.
Check the attributes of the script to see the original language.
Thanks,
Vinod.

Column heights in Smartform main window

Helo All.
I want to display complete column heights in main window of a smartform.
Right now, if there is a only one line item then in Smartform, it is printing the column height only upto that line item.
But I want to print complete height in the main window.
Points are assured !!!

Hi Anay,
Can u be more specific.
If my understanding is correct ( U have a main window say 6 X 4 inch size, inside which u are printing a table ,here if u have only one record then , U want the smartform to have 6 X 4 box with only one line.
The purpose of main window is not print the way u had asked for and to roll over to the next page if more records are to be printed,
Let me know , what u are printing in the main window ,, a table ?????
ifso
how to u want the display to be if the table has 35 records ,where we can print only 20(say) in one page
how u want the output in first page and second opage ?
do u want all rthe records to be printed or only n number of rocerds to be printed
rewrd points if u find it useful
-Sapsurfer

Smartforms : Second Page Main Window not being called

Hi All,
The smartform has 2 different pages, with totally different layout.
This also include that the Main window of both pages are different, having 2 different tables to fetch data.
The main window width sizes are the same on both the pages.
I have already used the Command node to call the second page, which it does.
The problem I am facing now is that the Secondary windows on page2 gets displayed, but the main window does not get displayed.
I have put a break-point in the code of main window of Page2. When executing this, it does not get triggered at all.
Now if I change the attribute of this main main window to secondary window and then I execute it then it gets triggered and gets displayed.
I have to keep this window as the main window as there might be chances of data overflow which should then continue printing on the next pages, therefore I cannot make it as the secondary window.
Please tell why the Main Window is not being called? (Note: Size of Main Windowin Page2 is same as main window in Page1)
I have searched the SDN already and did not find a solution to resolve this problem.
Thanks in Advance.
Regards,
Darpana.A

Hi All,
I have got the solution to this probelm.
In Page1 Main Window I have Table1 and a command node to Goto Page2.
Just after this command node I have added Table2 which earlier was the table in Main window of Page2.
So currently the Main window in Page2 has nothing included in it.
Anything after Command gets printed into the next page. Table2 is a part of Main Window in Page1 which gets printed into Main window of Page2.
Thanks for all your replies.
Regards,
Darpana.A
Edited by: Darpana Ahire on Aug 21, 2009 9:59 AM

Sapscript - Main window Frame

Hi all,
I am designing a form.I have three main windows in this form. I have the following code in the text editor for thre windows. /: box frame 10 tw
when I check the layout of the form I can see the box only in the main window 00 but not in main window 01 and main window 02. Can anyone please help me with this.
Reagrds,
Varun

Hi Varun,
Please note that no need to create a window for each column.you can define Your X-coredinate to define Verical line or means to create a box:
Sample Code :
BOX YPOS '1.25' LN WIDTH '120' CH HEIGHT 4 LN FRAME 10 TW
BOX XPOS '18.00' CH YPOS '1.25' LN WIDTH 0 CH HEIGHT '4.00' LN FRAME 10 TW
BOX XPOS '31.00' CH YPOS '1.25' LN WIDTH 0 CH HEIGHT '4.00' LN FRAME 10 TW
BOX XPOS '47.00' CH YPOS '1.25' LN WIDTH 0 CH HEIGHT '4.00' LN FRAME 10 TW
BOX XPOS '68.00' CH YPOS '1.25' LN WIDTH 0 CH HEIGHT '4.00' LN FRAME 10 TW
Lanka
Message was edited by: Lanka Murthy

Main window (& source list) are somehow... gone! help!

Similar Messages

Maybe you are looking for