Main window Unstarted

Hi Experts,
   When I run the driver program for SAP Script, while the write_form function module for Main window it gives the exception "Unstarted'. Sy-subrc = 5. Kindly help me out.
Thanks and regards,
Venkatraman.N

Hi,
Use 'OPEN_FORM' with your script name.
Also, check if you are transporting your script in testing client using SCC1. Otherwise it will throw that error as it will not be able to find your script in testing client.
Thanks,
Archana

Similar Messages

  • How to Print text in two main windows

    For printing label have created two main windows on a page. calling function write_form In ABAP Program under do loop for two times. 
    but program prints only one window. why is it so? how can i print text on two windows.
    do 2 times.
      COUNT = COUNT + 1.
    loop at itab WHERE DEPTT LT 200.
        CALL FUNCTION 'WRITE_FORM'
          EXPORTING
            ELEMENT  = 'TEST'
            FUNCTION = 'SET'
            TYPE     = 'BODY'
          WINDOW   = 'MAIN'
          EXCEPTIONS
           ELEMENT   = 1
           FUNCTION  = 2
           TYPE      = 3
           UNOPENED  = 4
           UNSTARTED = 5
           WINDOW    = 6
           OTHERS    = 7.
      endloop.
    enddo.
    Please guide.

    Since the information is variable and coming out of the print program, I can assume you want to print many labels but two to a page. Also, any page numbering, etc will need to be updated. This is easily accomplished with SAPScript but a feature people rarely use I believe. Here are the simple steps:
    1) On the Windows Screen: Creat a main window for the size of the label, etc knowing that you will be putting multiple windows on a page. For example, if page size is 8.5 x 11, maybe your window size is 6 X 4 or something similar. You only need one main window defined.
    2) Now go to Page Windows Screen. Add a window MAIN and down at the bottom where it says Window Type put in MAIN. Next to this field is a little field about two characters long. In here put in '01'.
    3) Now Add another window MAIN and down at the bottom put in '02'.
    Hopefully this gives you the idea. I've done this with up to 30 small windows in order to print variable window for labels on label stock such as Avery 8167, etc. 
    Good Luck!
    Tim Stadler
    Menasha Corporation

  • SAP Script need to display main window two times on single page.

    Hello Guru's,
    So here is my requirement, we need to print check. We are using F110_PRENUM_CHCK and linked with driver prog RFFOUS_C. We have Letter size paper with three sections,
    1. Check
    2. Voucher Section (containing table of element 515, 525 and 530) 515: Heading, 525 : Regup-Belnr, Regup-XBLNR, Regud-Wrbtr.
                                                                                    530: Regup-SGTXT
    3. Voucher Section (As a receipt for bank itself) : contains same data as 2nd section.
    I tried several things reading all the previous post over here in SDN.
    1. Created Z form created two instances of main window it results just single display of table (voucher section) in section two and not in third.
    2. I also tried pasting two times same code in single main window which gives only last item line for the table.
    3. Created z driver program made changes in Write_form added control form for element 515 that does results in showing element 515 on both the location.
                CALL FUNCTION 'CONTROL_FORM'
                  EXPORTING
                    command   = 'NEW-WINDOW'
                  EXCEPTIONS
                    unopened  = 1
                    unstarted = 2
                    OTHERS    = 3.
                CALL FUNCTION 'WRITE_FORM'
                  EXPORTING
                    element = '515'
                  EXCEPTIONS
                    window  = 1
                    element = 2.
    3. For Element 525 and element 530 is not acting same. In the prog 525 = hlp_ep_element. And there are many write_form for this. I tried pasting each and every place same kind of code. It doesnt work. what it do it gives me three pages of output repeating every thing twice and weirdly.
    I am need this to be done as I already took so much time solving nothing is working.
    Please give me the exact location where to paste this code so I can have two times data of main window.
    Or is there any other way to do this....Any way will be good for me as long as it shows two times data in the form.
    The data is table.

    Hi Manju,
    I create a new window (no main) but does not run, please can you tell me what should I do to make it work.
    Best regards.
    Robert.

  • [Urgent] How to Print Main Window Twice ??

    Hi Everyone,
    I am making a Prenum Check which has
    1 Main Win 00 : Invoiced Item Lines for the Check Payment
    2 Check Window: A Check to be printed
    3 Main Win 01 : Copy of Main Win 00
    The Main Window has Line Items of the Payment Invoices for Vendor, which can flow across multiple pages.So I cannot use NEW-WINDOW. I cannot make the changes in SAP Program. Please help me sorting out this issue with some small PERFORM Code which will copy contents of current main window and print it back in new window on the same page.
    Please Help me....
    Thanks in Advance.
    Regards,
    Abhsihek B.

    HII
    HAVE ALOOK AT THE CODE
    TABLES : KNA1 , T005T.
    SELECT-OPTIONS : S_KUNNR FOR KNA1-KUNNR.
    DATA : BEGIN OF ITAB OCCURS 0,
           KUNNR LIKE KNA1-KUNNR,
           NAME1 LIKE KNA1-NAME1,
           LAND1 LIKE KNA1-LAND1,
           LANDX LIKE T005T-LANDX,
           END OF ITAB.
    DATA : V_LANDX TYPE T005T-LANDX.
    DATA : IT_STEXT TYPE TLINE OCCURS 0 WITH HEADER LINE.
    START-OF-SELECTION.
      SELECT KUNNR NAME1 LAND1 FROM KNA1 INTO CORRESPONDING FIELDS OF TABLE
    ITAB WHERE KUNNR IN
    S_KUNNR.
      LOOP AT ITAB.
    SELECT SINGLE LANDX FROM T005T INTO (V_LANDX) WHERE LAND1 = ITAB-LAND1.
        ITAB-LANDX = V_LANDX.
        MODIFY ITAB INDEX SY-TABIX.
      ENDLOOP.
        CALL FUNCTION 'OPEN_FORM'
         EXPORTING
         APPLICATION                       = 'TX'
         ARCHIVE_INDEX                     =
         ARCHIVE_PARAMS                    =
         DEVICE                            = 'PRINTER'
         DIALOG                            = 'X'
           FORM                              = 'Z50653_PAGE1'
           LANGUAGE                          = 'E'
         OPTIONS                           =
         MAIL_SENDER                       =
         MAIL_RECIPIENT                    =
         MAIL_APPL_OBJECT                  =
         RAW_DATA_INTERFACE                = '*'
         SPONUMIV                          =
       IMPORTING
         LANGUAGE                          =
         NEW_ARCHIVE_PARAMS                =
         RESULT                            =
         EXCEPTIONS
           CANCELED                          = 1
           DEVICE                            = 2
           FORM                              = 3
           OPTIONS                           = 4
           UNCLOSED                          = 5
           MAIL_OPTIONS                      = 6
           ARCHIVE_ERROR                     = 7
           INVALID_FAX_NUMBER                = 8
           MORE_PARAMS_NEEDED_IN_BATCH       = 9
           SPOOL_ERROR                       = 10
           CODEPAGE                          = 11
           OTHERS                            = 12
        IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        CALL FUNCTION 'START_FORM'
         EXPORTING
           ARCHIVE_INDEX          =
           FORM                   = 'Z50653_PAGE1'
           LANGUAGE               = 'E'
           STARTPAGE              = 'PAGE1'
           PROGRAM                = ' '
           MAIL_APPL_OBJECT       =
         IMPORTING
           LANGUAGE               =
         EXCEPTIONS
           FORM                   = 1
           FORMAT                 = 2
           UNENDED                = 3
           UNOPENED               = 4
           UNUSED                 = 5
           SPOOL_ERROR            = 6
           CODEPAGE               = 7
           OTHERS                 = 8
        IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      LOOP AT ITAB.
          CALL FUNCTION 'WRITE_FORM'
           EXPORTING
             ELEMENT                       = ' '
            FUNCTION                       = 'SET'
            TYPE                           = 'BODY'
             WINDOW                         = 'MAIN'
           IMPORTING
             PENDING_LINES                  =
           EXCEPTIONS
             ELEMENT                        = 1
             FUNCTION                       = 2
             TYPE                           = 3
             UNOPENED                       = 4
             UNSTARTED                      = 5
             WINDOW                         = 6
             BAD_PAGEFORMAT_FOR_PRINT       = 7
             SPOOL_ERROR                    = 8
             CODEPAGE                       = 9
             OTHERS                         = 10
          IF SY-SUBRC <> 0.
            MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
         endloop.
        CALL FUNCTION 'CLOSE_FORM'
       IMPORTING
         RESULT                         =
         RDI_RESULT                     =
       TABLES
         OTFDATA                        =
         EXCEPTIONS
           UNOPENED                       = 1
           BAD_PAGEFORMAT_FOR_PRINT       = 2
           SEND_ERROR                     = 3
           SPOOL_ERROR                    = 4
           CODEPAGE                       = 5
           OTHERS                         = 6
        IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.

  • Only the last line item is shown in main window...

    Hello Experts,
    I created a custom form for the standard checque program RFFOUS_C. Now, in my MAIN window, I
    called a subroutine in a custom program which loops through the line items but the problem is
    only the last line item is being shown. I tried using CONTROL_FORM to create a new line
    but it does not work. Note that I did not customize RFFOUS_C since it is being used by
    multiple companies. Below is my code:
    SAPSCRIPT:
    510-C
    Begin of insertion DEVK940799 11/10/2008 DEL_HIDALGO
    DEFINE &LTYC_XBLNR& = ''
    DEFINE &LTYC_BLDAT& = ''
    DEFINE &LTYC_SGTXT& = ''
    DEFINE &LTYC_DMBTR& = ''
    PERFORM WRITE_LINE_ITEMS IN PROGRAM Z9999RFI_Z2574FFI_RA
    USING &REGUH-LAUFD&
    USING &REGUH-LAUFI&
    USING &REGUH-XVORL&
    USING &REGUH-ZBUKR&
    USING &REGUH-LIFNR&
    USING &REGUH-VBLNR&
    CHANGING &LTYC_XBLNR&
    CHANGING &LTYC_BLDAT&
    CHANGING &LTYC_SGTXT&
    CHANGING &LTYC_DMBTR&
    ENDPERFORM
    PROTECT
         &LTYC_XBLNR&     &LTYC_BLDAT&     &LTYC_SGTXT&     &LTYC_DMBTR&
    ENDPROTECT
    End of insertion DEVK940799 11/10/2008 DEL_HIDALGO
    PROGRAM:
    IF gt_regup[] IS NOT INITIAL.
        CALL FUNCTION 'OPEN_FORM'
           EXPORTING
    *         APPLICATION                       = 'TX'
    *         ARCHIVE_INDEX                     =
    *         ARCHIVE_PARAMS                    =
    *         DEVICE                            = 'PRINTER'
    *         DIALOG                            = 'X'
             form                              = lcc_z2574ffi_ra
    *         LANGUAGE                          = SY-LANGU
    *         OPTIONS                           =
    *         MAIL_SENDER                       =
    *         MAIL_RECIPIENT                    =
    *         MAIL_APPL_OBJECT                  =
    *         RAW_DATA_INTERFACE                = '*'
    *         SPONUMIV                          =
    *       IMPORTING
    *         LANGUAGE                          =
    *         NEW_ARCHIVE_PARAMS                =
    *         RESULT                            =
           EXCEPTIONS
             canceled                          = 1
             device                            = 2
             form                              = 3
             OPTIONS                           = 4
             unclosed                          = 5
             mail_options                      = 6
             archive_error                     = 7
             invalid_fax_number                = 8
             more_params_needed_in_batch       = 9
             spool_error                       = 10
             codepage                          = 11
             OTHERS                            = 12.
        IF sy-subrc <> 0.
    *        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    *                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        LOOP AT gt_regup INTO lw_regup.
          m_line_items 'LTYC_XBLNR' lw_regup-xblnr.
          m_line_items 'LTYC_BLDAT' lw_regup-bldat.
          m_line_items 'LTYC_SGTXT' lw_regup-sgtxt.
          m_line_items 'LTYC_DMBTR' lw_regup-dmbtr.
          DELETE ex_output WHERE value IS INITIAL.
          CALL FUNCTION 'WRITE_FORM'
           EXPORTING
             element                        = '510-C'
             function                       = 'APPEND'
    *         TYPE                           = 'BODY'
             window                         = 'MAIN'
    *       IMPORTING
    *         PENDING_LINES                  =
           EXCEPTIONS
             element                        = 1
             function                       = 2
             type                           = 3
             unopened                       = 4
             unstarted                      = 5
             window                         = 6
             bad_pageformat_for_print       = 7
             spool_error                    = 8
             codepage                       = 9
             OTHERS                         = 10.
          IF sy-subrc <> 0.
    *        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    *                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ENDIF.
          CALL FUNCTION 'CONTROL_FORM'
            EXPORTING
              command   = 'NEW-LINE'
            EXCEPTIONS
              unopened  = 1
              unstarted = 2
              OTHERS    = 3.
          IF sy-subrc <> 0.
    *        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    *                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ENDIF.
        ENDLOOP.
        CALL FUNCTION 'CLOSE_FORM'
    *       IMPORTING
    *         RESULT                         =
    *         RDI_RESULT                     =
    *       TABLES
    *         OTFDATA                        =
           EXCEPTIONS
             unopened                       = 1
             bad_pageformat_for_print       = 2
             send_error                     = 3
             spool_error                    = 4
             codepage                       = 5
             OTHERS                         = 6.
        IF sy-subrc <> 0.
    *        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    *                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDIF.

    Hi,
    Write the at last event in the program and check if it works
      At last.
           CALL FUNCTION 'CONTROL_FORM'
            EXPORTING
              command   = 'NEW-LINE'
            EXCEPTIONS
              unopened  = 1
              unstarted = 2
              OTHERS    = 3.
          IF sy-subrc  0.
           MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ENDIF.
    Regards,
    Sravanthi

  • Printing in only last line item printing in main window

    Hi All,
    My requiremnet is to print same data in two blocks for F110 payment cheque
    Iam using 2 main windows to print same data if block exceeds it will go to next page
    iam calling the windows as shown below
    CALL FUNCTION 'WRITE_FORM'
          EXPORTING
            window   = 'MAIN00'
            element  = hlp_ep_element
            function = 'APPEND'
          EXCEPTIONS
            window   = 1
            element  = 2.
        IF sy-subrc EQ 2.
          err_element-fname = t042e-zforn.
          err_element-fenst = 'MAIN00'.
          err_element-elemt = hlp_ep_element.
          err_element-text  = text_525.
          COLLECT err_element.
        ENDIF.
        CALL FUNCTION 'WRITE_FORM'
          EXPORTING
            window   = 'MAIN01'
            element  = hlp_ep_element
            function = 'APPEND'
          EXCEPTIONS
            window   = 1
            element  = 2.
        IF sy-subrc EQ 2.
          err_element-fname = t042e-zforn.
          err_element-fenst = 'MAIN01'.
          err_element-elemt = hlp_ep_element.
          err_element-text  = text_525.
          COLLECT err_element.
        ENDIF.
    Iam getting only last line item printing in main window
    Please provide the inputs.
    Thanks,
    Kamalakar.
    Please use code tags.
    Edited by: Rob Burbank on Nov 25, 2011 11:51 AM

    Hi,
    My requirement was to print same block twice in cheque printing of F110.
    I have used the function module  'WRITE_FORM_LINES' to print more than one line item in secondary window in the script .
    fill the Lines internal table as shown below.
    Example :
        lines-tdformat = 'TM'.
        CONCATENATE regup-xblnr ',,' w_date ',,'  w_bsak-sgtxt ',,' w_gross ',,' w_dis ',,'
        w_net INTO lines-tdline.
    APPEND lines.
    CALL FUNCTION 'WRITE_FORM_LINES'
          EXPORTING
           function                       = 'APPEND'
           header                         =  header_t
           type                           = 'BODY'
           window                         = 'MAIN01'
        IMPORTING
          FROMPAGE                       =
          PENDING_LINES                  =
          TABLES
            lines                          = lines
         EXCEPTIONS
           function                       = 1
           type                           = 2
           unopened                       = 3
           unstarted                      = 4
           window                         = 5
           bad_pageformat_for_print       = 6
           spool_error                    = 7
           codepage                       = 8
           OTHERS                         = 9
        IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ENDIF.

  • I have used Lr many years without problems. Now it is inpossible to edit . Can not see the editing in main window only in the small thumbnail. Suddenly it is not possible to import  raw-files from my Linux camera ( it worked earlier)

    Editing mode does not work. I can not follow de editing in the main window. I cah see it in the thumbnail.

    From your description of the problem, I suspect that you have a standalone license but have downloaded and installed the CC update. Or, it's the other way around. In either case, you need to install the right version.

  • Page break for Smartform with multiple main window on pages

    Hi Experts,
    I have a requirement for printing 3 pages. The difference among the 3 pages is the main window part.
    The main window contains not only internal table, also complicated texts like payment instructions etc.
    The requirement is in each page, the data in internal table should be changed, also payment instruction should be changed accordingly.
    e.g:
    Main Window of Page 1
    Part 1 for Internal table
    VAT on ITEM ------- 4O-------60,00------0.00%-------EUR
    Part 2 for Payment Instructions
    Texts for Page 1
    Main Window of Page 2
    Part 1 for Internal table
    VAT on ITEM ------- 5O-------60,00------0.00%-------EUR
    Part 2 for Payment Instructions
    Texts for Page 2
    Main Window of Page 3
    Part 1 for Internal table
    VAT on ITEM ------- 6O-------60,00------0.00%-------EUR
    Part 2 for Payment Instructions
    Texts for Page 3
    At first, I was using only one page 'Page1' with a variable page_no = 1 as default value, and use program line page_no = page_no + 1 as counter. when page_no = 2, use command for force page break to 'Page1', then under the command, change the internal table and payment instruction texts. when page_no = 3, ...
    But I encountered an error saying:
    Runtime Errors         GEN_BRANCHOFFSET_LIMIT_REACHED
    Short text
         Jump distance is too large and cannot be generated.
    So I created 3 pages, with different main window M_window1, M_window2, M_window3 for each page. In page1, after printing the M_window1, page_no = 2, use command to go to page2, but page2 is never printed. I think this is because only one main window can exist in a smartform? but why smartform allows creating individual main window for different pages? what's the use of such main window?
    By the way, what's the use of command for force page break? only work for one main window in a smartform?
    Getting back to my requirement, I think I should still use one page and command for page break. I am trying to solve this.
    Thanks.
    Li Jun Da.

    Now I am using 3 pages: Page 1, Page 2, Page 3.
    Page 2, Page 3 are copies of Page 1 with main window renamed as second window: mw 2, mw 3.
    I also created 2 command nodes in main window of page 1: cmd 2, cmd 3.
    cmd 2 is for page break to Page 2, cmd 3 is for page break to Page 3.
    The second window mw 2, mw 3 in Page 2, Page 3 can be displayed.
    Even though, I still can't understand how main window of pages (not 1st page) can work.

  • Two main windows in smartform or two loops in one main window?

    Hello All,
    I have requirement in smartform where i want to print two diffrent data header and item data in the same page.
    and in between these two data i want one template to be printed for item data .
    Smartform is giving me error if i use two main windows
    if i use two loop nodes in the main window thn how to restrict the data getting over flowed to template(item data)
    scenario is
    header data****
    **item header**
    item data****
    Pls comment....
    Regards,
    Sunny

    As main window can only be one, so try it this way:
    Under main window create a TEXT1 for header text( first header) than a LOOP1 for looping the header table, under that first create a TEXT2 for header data, than below it create another TEXT3 for header text ( Second header), than below it add a LOOP2 for looping item table and in that add a where condition than under it a TEXT4 for item data .
    MAIN_WINDOW
        TEXT1                                     " first header
        LOOP1                                    " header table
            TEXT2                                 " header data
            TEXT3                                  " Second header
            LOOP2                                " item table with where condition
                TEXT4                             " item data
    With luck,
    Pritam.

  • How to use Two main windows with in a page in script ?

    Hi any body explain me...
    How to use Two main windows with in a page in script ?
    with  header data in one main window,
    & Item data in other main window.

    HI..,
    u need to go for <b>SPLITTING THE MAIN WINDOW</b> !!!
    Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
    Here is the procedure !!
    -->Create a page window and assign it to a page.
    Choose <b>Edit --> Main windows</b>.
    A dialog box appears.
    -->Enter values in the fields <b>Area width</b> and A<b>rea height</b> in accordance with the input guidelines for main windows.
    -->Enter values in the fields <b>Spacing</b> and Number in the <b>Horizontal group</b> if you want to use multiple columns. You can ignore the fields in the Vertical group.
    Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the <b>Horizontal and Vertical groups</b>.
    -->The value in the field Left margin varies from main window to main window if multiple columns are used. The following applies:
    <b>
    Left margin of current column + Window width + Horizontal spacing = Left margin of next column</b>
    In label printing, the field Upper margin also varies from main window to main window:
    <b>
      Upper margin of current main window +  Window height + Vertical spacing = Upper margin of next main window</b>
    -->Enter a value in the field Start position.
    This is a counter. Enter a starting value which is equal to or greater than 1.
    -->The main windows are added to the list.
    -->Save your form.
    reward if it helps u...
    sai ramesh

  • How to close main window on click of a button on popup window

    Hi All,
    I have created a web page which on certain condition display a popup window to to provide information. Wht i want is that when i click on close button on my popup window, my main window should also close.
    Can anyone please help with this requierment!!!
    Regards,
    tushar

    Hi All,
    Could anyone of you please help me by answering the thread
    WDDOEXIT method not called when the application is closed from the portal
    Thanks,
    Subash M

  • How to pop new window in running main window

    i have to popup a sub windopw in main window....and i need to plot common data to be printed on front panal...
    i am usind daq ...can i share same daq in main and sub window...hao??or can i share some calculated value in main and sub window of labview.,,pleasehelp me fast

    As KoenR has said - you can use SubVIs and set them to 'Show front panel when called' which will make them show as new windows in your application.
    As for sharing the data, you could use something like a notifier (under synchronisation) for broadcasting the data to the SubVI. If you create the notifier in your main application, with a send notification VI and then pass the reference to the notifier into the SubVI when you call it which has a 'wait on notification' VI it will then receive the data form the main loop. 
    If you look in the LabVIEW examples under 'notifiers' you will find 'Pass Data with Notifiers' which demonstrates how to use notifiers to pass data to SubVIs.
    Certified LabVIEW Architect, Certified TestStand Developer
    NI Days (and A&DF): 2010, 2011, 2013, 2014
    NI Week: 2012, 2014
    Knowledgeable in all things Giant Tetris and WebSockets

  • How to change the default window size display font size on Lync 2013 main window?

    Hi champs,
    Just a simple non-technical question: How to change the default window size display font size on Lync 2013 main window on Windows 7 desktop?
    Thanks,

    Hi,
    Did you mean change the Lync: Change the Default Font and Color of Instant Messages just as Edwin said above?
    If not, as I know, there is no natural way to change it.
    If yes, on the latest version of Lync 2013 client, there is a new option “IM” on Lync client “Options” list. And you need to change the default Font and Color of IM in the interface of “IM”.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • I open iWeb but the main window doesn't open/appear on screen. The little windows like the inspector and font windows appear. Can anyone help?

    I open iWeb but the main window doesn't open/appear on screen. The little windows like the inspector and font windows appear. Can anyone help?

    Try the following:
    1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iWeb's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
    3 - launch iWeb and try again.
    NOTE:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    OT

  • How can I get the favorites from my favorites tool bar to open in the main window and not the sidebar?

    I created a favorites toolbar. When I click on some of the icons, they open in the main window like I expect. Others open in a sidebar which I do not want and cannot even get to full size. How do I get all of them to open in the main window?

    Generally, Bookmarks that open in the Sidebar are from links that you clicked on on web sites to add their Bookmark. To change that, right-click on the Bookmarks, opening in the Sidebar, choose "Properties" and un-check "Load this bookmark in the sidebar".
    *For links and info on Bookmarks, see [https://support.mozilla.com/en-US/kb/how-do-i-use-bookmarks How do I use Bookmarks?]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Maybe you are looking for