Mainboard doesn't recognize graphiccard

I have a MSI mainboard 870-C45 and tried to replace my my graphic card to a MSI HD6570, but now I have only the onboard graphic card? I can't play COD Ghost or any other game. Does anyone have an answer for my problem?
greets,
Dutchaugust.

>>Posting Guide<<

Similar Messages

Mainboard doesn't recognize my cpu cooler

I have Vantec Aeroflow VA4-C7040 Socket-A
but whenever i boot up my cpu it says cpu fan is not
working even thouhg it is working great
i plugged cpu fan correctly
is ther anyone who could help me? ?(

I just discovered the same situation with my MSI-6585 (648 MAX L) mainboard.
I just replaced my stock Intel Heatsink and Fan with the Vantec AeroFlow VP4-C7040.
When I did, I started hearing an annoying beep. A peek in the bios shows the CPU Fan RPM Speed reading at 0. I disabled the beep.
I use a Vantec Nexus Fan Control Panel, and it correctly displays the fan's speed and also allows me to control it through the on-face pot. For those who think it's because the RPM is too low for the motherboard to read, think again. I can vary the RPM between 2400 and 5200 rpm, and I never get a motherboard reading. The fan controller seems to work without a hitch.
Incidentally, just for grins I hooked up my stock Intel fan again and it works fine, both directly connected to the 648 MAX and when connected to the Nexus Panel. From both connections I can get the RPM reading from the motherboard no problem.
I tried hooking up the Aeroflow directly to the 648 MAX to take the Nexus panel out of the loop, and got the same result: CPU FAN RPM=ZERO.
It could be that MSI is using older code that isn't able to decipher the speeds on some of the newer fans. Or maybe it has something to do with the fact that the AeroFlow uses a TMD (Tip Magnetic Driving) fan as opposed to a traditional brushless rotor.
Annoying, but not terribly. Would be nice if it worked, though.

!!!!!I CAN'T OVERCLOCK MY CPU. BIOS DOESN'T RECOGNIZE MY AMD ATHLON XP-MOBILE

My configuration is this:
Mainboard: MSI K7N2-DELTA2-FSR
CPU: AMD Athlon XP-Mobile 2500+ 1855MHZ
Video Card: CAPTIVA Nvidia 6600GT 128MB 128bit
Hard disk: Internal Maxtor DiamonMax 10 300GB S-ATA 16MB Buffer
Audio Card: Sound Blaster Audigy Live 5.1 24bit
Power Supply: 400WATT
DVD drive: LG 16X
SO I OVERCLOCK MY CPU UNTIL 3200+ (2200mhz), AND IF I WANT TO OVERCLOCK MORE DURING "POST", BIOS DOESN'T RECOGNIZE THE NEW VALUE (ES: FSB 200 / X11.5 = 2300mhz . DOESN'T RECOGNIZE).
PLEASE HELP ME OR CAN YOU TELL ME HOW CAN I RESOLVE THIS PROBLEM???
THANKS A LOT. BYE

Quote from: Grayone on 06-February-06, 00:55:59
Please furnish us some more info concerning the memory you are using and power output of the 3.3v - 5v -12v rails of your power supply along with the name of its manufacturer.
Some mobile cpus start up with a lower multiplier and then go to the bios to use the preset settings in the bios. If the cpu can't start with the bios settings, it remains at its start up values. Your mobile may not be able to run at a multiplier of 11.5 with a 200fsb. Drop its fsb back to 166 (stock fsb 133) and see if you can run it at its rated multiplier of 14. That will equal 2324mhz.
Overclocking is finding a balance between the fsb and the multiplier that allows you to get the most stable speed out of the cpu.
You also have not mentioned what vcore voltage that you are using or the temps.
The memory that I'm using are : V-Data 512x2 MB DDR CL 2,5
The power supply is 400watt chassis, 3,3V, 12V, 5V.
I tell you that with the mainboard ASUS I did't have this problem with the multiplier because I put 11.5 x 200Fsb.
Thanks of all.MSI DriversMSI Drivers

Itunes 10.6 doesn't recognize my iphone 4s 32gb, could you please help me?

I bought an iPhone 4s 32gb from Singapore. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone. I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?. iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
System manufacturer System Product Name
iTunes 10.6.1.7
QuickTime not available
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0013AC2C0E8DEF50
Current user is an administrator.
The current local date and time is 2012-06-12 20:13:12.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel(R) G41 Express Chipset
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
Description:            Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
IP Address:             192.168.1.3
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Tue Jun 12 19:48:36 2012
Lease Expires:       Wed Jun 13 07:48:36 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
G: Optiarc DVD RW AD-7220A, Rev 1.01
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

Well, you do not mention what computer OS you are using, so here are the support documents for both.
Windows:     http://support.apple.com/kb/TS1538
OS X:     http://support.apple.com/kb/TS1591

ITunes doesn't recognize either of my iPods

I downloaded the latest update recently and since then iTunes doesn't recognize either of my two iPod touches (4th gen), even though the computer does. My iPad (1st gen) is still recognized normally. I tried uninstalling iTunes and reinstalling it several times, and that didn't work. The iPods are recognized by iTunes on other computers. The computer in question runs windows 8.1, if that makes a difference. From the look of these forums it looks like I'm not the only one who has this problem. Please help.

Hi Tanskalinen,
If you are having issues with iTunes not recognizing some of your devices on your Windows machine, you may find the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
- Brenden

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

Solved the problem. I had to allow cookies for safari and it run - as here: Re: itunes keeps asking for my apple id password. it's NOT entered incorrectly.

After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?

After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?
THis also happened with my old iphone 4s
I need help!

Hi loist,
Thanks for visiting Apple Support Communities.
If your iPhone is not being recognized by your computer after you click "Trust," the troubleshooting steps found here can help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jeremy

Tecra M4 - DVD drive doesn't recognize any disk under Vista

Hi,
after the installation of Vista my dvd drive doesn't recognize any disks !
No upgrade from XP! It was a clean Vista installation.
I found several links about the registry entries upper and lower filter this entries doesn't exist in my registry under the class CDROM.
I tested the drive under XP it works fine and recognizes everything.
Drivers are correctly installed no problems in the device manager is prompted.
So i have no idea how to get it working, seems to be a Vista problem
Could any one help me ? I'm really frustrated about this
Thanks for your help

Maybe this helps:
- Remove the CD/DVD drive from the device manager.
- Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
- Then reboot the notebook
But what happens exactly? What disks are not recognized?

How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

Ask the headset manufacturer.
Barry

This Question is at least 2.5 years old. But still an issue. I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7. Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7. Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

iTunes does not use the .xml it uses the .itl
If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.

I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I have no access ...

I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I have no access ...
HELP HELP

To confirm, your existing mail client isn't communicating with your existing and remote mail services at Dreamhost? Which mail client are you using (Apple mail?), and how is mail on the client set up?
It would initially seem that your client is still referencing the server, either for its inbound or outbound mail. (And I'm not sure how unplugging the server helps here, unless there's some sort of a configuration issue, or a duplicate network address or such.) This would usually be something within the configuration of the mail client.
The Mac OS X Server is significantly easier than the many other servers and server operating systems I've dealt with over the years, but it requires reading the manuals and/or some knowledge of networking and of server environments.
Small shops and home folks without the time or inclination to "spin up" on these server areas can be well-served with some help initially configuring the server. Servers are different from clients. Stuff that you're implicitly used to using when you're running a client -- the DHCP server, for instance -- are what the servers provide you with.
As for Mac OS X Server and particularly if you head outside of the default settings and sequences and off into the customizations, which is what has happened here, you might want to engage some assistance. Not just for the direct and obvious initial set-up sequence, but also for getting you set-up and started with backups and other such tasks. Before you get too deep in here and get too much underway and too much saved on your disks, do seriously consider getting somebody in to help set this box up for you.
Mac OS X Server is not "no IT", but it is rather closer to "less IT" than most. Particularly once you get it configured and running.

When I plug my iPhone in to my computer, iTunes doesn't recognize it as a device. I have deleted and re-downloaded iTunes twice which seems to fix the problem temporarily but then the next time, the device is not recognized.

when I plug my iPhone in to my computer, iTunes doesn't recognize it as a device. I have deleted and re-downloaded iTunes twice which seems to fix the problem temporarily but then the next time I plug my phone in, the device is not recognized.

What happens if you go to iTunes > File > Devices, do you get the option to Sync iPhone?
You could try a reinstall of iTunes. OS X Yosemite: Reinstall apps that came with your Mac

I just updated iTunes to 11.1.4.62 and it doesn't recognize my iPod.

Hello All!
I've just recently updated iTunes to the latest version but it no longer recognizes any of the iPods in my house. It shows up in Windows but for some reason when I open up iTunes, iTunes just doesn't recognize that it's plugged in. I've never had this happen with any past updates, can anyone assist me please?
Thanks in advance.

SOLVED:
refer to this forum if in need: https://discussions.apple.com/message/24603547#24603547

Have problem setting Email alerts for Calendar events. Warning message says I need to set up a card in Contacts with my email. I do but it doesn't recognize it. How do I indicate the email I want alerts sent to?

The system of setting up email alerts for Calendar events worked fine in Snow Leopard but since I upgraded to Mt. Lion Calendar won't let me set email alerts. When I try, I get an error message saying I need to set up a card in Contacts for my email. I have a card set up in Contacts for both of my email addresses but it doesn't recognize them. Perhaps the name I have on the card doesn't match a name that Calendar is looking for. Calendar doesn't seem to have a way in Preferences or elsewhere to indicate the email I want alerts sent to. Any ideas how I can get this system working again? Thanks for your help.

You might want to consider starting a new discussion. Since this one is marked solved, less people are likely to look at it. You can link to this one.
See if another contact is marked as this is my card.

Mainboard doesn't recognize graphiccard

Similar Messages

Maybe you are looking for