Mainboard msi 9105 with video card vtdr 256 fx 5600

I don't succeed in understanding the motive for which replacing my old video card with the msi vtdr 256 fx 5600 creates me many problems among which:
in it explores resources it emulates a controller scsi??
a peripheral cd rom??
what kind of conflict is it? didn't I have any kind of problem, that I can do before???
when ago the boot the mouse doesn't stir if I press again ago the reset switch the boot and the mouse it stirs

Quote from: badboy2k on 03-May-15, 21:22:59
>>Posting Guide<< <-- can you read and list your parts used here?
Without above done, hard to say what I think.

Similar Messages

H67A-G43 (B3) - Windows 7 64-bit Install issues with Video Card(s)

Specs
Case - CoolerMaster CMP 350 w/500 Watt PSU
Motherboard - MSI H67A-G43 (B3)
Processor - Intel i7-2600
Memory - 16GB (4x4GB) DDR3 1333
Hard Drive - Western Digital Caviar Green 1TB SATA 2
Video - *multiple cards tested
Issue
OS Installation
Video Card - ASUS HD 7850 DirectCUII - Computer POSTs, begins to load Windows 7 setup, freezes on the Windows 7 installer background.
Video Card - GeForce 9300 GE - Computer POSTs, begins to load Windows 7 setup, freezes on the Windows 7 installer background.
Video Card - MSI N430 GT - Computer does not POST.
Video Card - Integrated - Computer boots and completes install of Windows 7 64-bit. Install all drivers, update BIOS to current version. Attempt to boot with video cards listed above with new BIOS, same issues. (First two hang on Windows logo, 3rd no POST.)
Attempted Resolutions
As stated, I have tried 3 different video cards, as well as 2 motherboards, both of them MSI H67A-G43(B3).
We have ordered 2 other new motherboards (one ASUS, one Gigabyte) because we need to get this built for the customer ASAP. However, we have previously used the H67A-G43 boards with no issues. We would like to be able to use these motherboards on future builds. What possible solutions are there for these issues?

Quote from: HU16E on 20-April-12, 03:32:27
Tried a battery removed CMOS clear and reset after the UEFI/BIOS update? Tested with another PSU? Tried with just one RAM stick in the primary dimm slot, or with just two sticks?
Results
1 Stick DDR3 - Freezes in "Starting Windows" screen when video card (HD 7850) installed. Still works correctly with Integrated.
1 Stick DDR3 + swapping out CoolerMaster 500 Watt PSU for "Power" 500 Watt PSU - Freezes in "Starting Windows" screen with video card. Using Integrated video, works correctly.
This is on an unflashed H67A-G43 (B3) new out of the box.

GOP/UEFI BIOS for MSI R7 Series Video Card

Hi I need GOP/UEFI vbios for MSI R7 Serise video card
Model: R7 250X 1GD5
Seial No: 602-V271-24SB1403072315
Thanks

Use the attached. TV271MH.301
To flash create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Unpack the provided archive (TV271MH.301.rar) and put the included file (TV271MH.301) on that stick.
Rename the vbios files to .rom (e.g. one to 301.rom).
Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 301.rom [ENTER] and let it flash the vbios.

I had a problem with imac screen going black. apple store diagnosed prob with video card which they replaced. Brought it home, turned it on (have done this 4 times) it starts up, wheel turns, there is a long bar at bottom which fills up, then it turns off

I had a problem with imac screen going black. apple store diagnosed prob with video card which they replaced. Brought it home, turned it on (have done this 4 times) it starts up, wheel turns, there is a long bar at bottom which fills up, then it turns off

Apple guarantees their work, take it back.

Motherboard issue? With video card.

Mainboard: 760GMA-P34(FX) (MS-7641)
PCB Version: 5.0
BIOS Version: VP.0 (aka Version: V25.0)
BIOS Date: 5/28/2013
Everything works fine using onboard video. Windows 7 64 bit.
Plug in my Nvidia GT 620 and immediately CPU fan maxes out with no increase in temperature, system still stable using standard VGA driver provided by windows. After ANY NVIDIA driver is installed, windows blue screens upon boot. We can't see the error because the blue screen is too quick, and it immediately tries to reboot and restore. Event logs show nothing.
I'm at a loss here. MSI motherboard tech support isn't open on the weekends, hopefully you guys can shed some light. Is this common? Do I need a new board? I've never come across anything like this before. The rest of the machine is 100% stable, the only issue(s) that arise is when the video card and the drivers are installed. The video card works fine in another machine, I've replaced the power supply with a much heftier one with more juice, and the same thing happens.
Thanks!

Quote from: badboy2k on 03-May-15, 21:22:59
>>Posting Guide<< <-- can you read and list your parts used here?
Without above done, hard to say what I think.

PCI port problems with video card

I have been running 2 video cards (ati 9800pro and 7500) fine for about 2 months now. Over the weekend I came home to find the monitor with my second card garbled with black lines running up and down the screen, shifting left and right. Also, there was a problem with my promise controller (had a question mark next to it in device manager) I reinstalled that and it works fine now. My second card continues to give me problems though. Device manager picks it up and says that my card is working fine but in display settings my card does not show up. I believe it a problem with the motherboard as I have tried 2 nvidia cards with the same result. It is also not related to windows as if I change the boot config to load my second card first (pci) the black lines/wavy picture loads up with the msi screen and in the bios setup as well (totally unreadable). I've also made sure that my monitor is working fine. Any suggestions???? Thanks.
Ian

Well to tell you the truth, I don't like the sound of this ...especially since you said that you tried another card, and had the same result....Well I would first go into the BIOS and on the PNP/PCI page, check the Clear NVRAM to enabled..As this will reset all the PNP devices...See if that works ...Have you tried to switch the AGP/PCI initiation sequence in the BIOS? back and forth?...You can also see if there are any IRQ conflicts.(but you probaly did this allready)...You can also try to increase the PCI latency, If it is set to 32 go up to 64 and try...Do you have any other PCI cards with problems?...Have you tried a different PCI slot?.....Well maybee another member or moderator has some advice ...Let us know.....Sean REILLY875

Will the Corsair CX430 Handle the MSI N560GTX-Ti Video Card

The Corsair +12V rail is rated at 28A and 336 Watts.
If this won't handle it, what do I need for the N560GTX-Ti twin frozr II?
What will be the system signs if it cannot handle it?

I upgraded the power supply to a Corsair TX750 with 62 Amps and 744 Watts on the +12V rail, but am still having problems with the video card. Here are the symptoms:
With the computer turned off through windows there is still a voltage trickle that causes the blue LEDs on the DRAM fans to stay on. The blue LEDs on the CPU fan also stay on and there is a slight jerk in the fan blades twice every second. Again the computer is off and this is happening.
If I unplug the power cord then everything goes off. But if I plug the power cord back in and the computer is still turned off, I get the trickle and same symptoms.
This happens even if I turn the power supply off at its switch on the back of the power suppply.
If I take the MSI video card out the symptoms go away.
This symptom appeared before I ever switched the computer on with the MSI video card.
Also, If I take the MSI video card out and install a PCI-E 16 Radeon video card, there are no symptoms, so the problem does not seem to be in the PCI-E bus or the motherboard.
The video card seems to be functioning otherwise.
Any Suggestions?

Sound conflicts with video card

I have the 845GLMS/GVMS series MS-6754 Motherboard and I have having some major conflicts between my GeForce FX 5200 PCI 256 MB video card and any sound that I run off the card -whether it be the AC97 sound off the board or my installed Create Audigy LS PCI card or my Create Soundblaster USB device. What happens is that if I run a game like Doom 3 - with any audio enabled, the FPS slows down to 5-8 BUT if I turn all sound off, it goes up to 30-40 FPS and this is also true with other games. I have all the latest drivers and the BIOS is as up to date as Live Update will let it. What should I do??? HELP!!!!

change the sound card to another pci slot..
BTW which slot is the vid card in, it should be in the first available from the top..

G505 problems with video cards.

Lenovo G505, 59-419907, AMD A6-5200, AMD Radeon R5 M230
I suffer second day. I downloaded a lot of different drivers.
several times reinstalled windows 8.1.
after installing windows in my Device Manager, there is a Standard VGA Graphics Adapter and unknown video device
when I try to install vga drivers from the Lenovo site, or from the AMD site, both graphics card become with the error icon
- Windows has stopped this device because it has reported problems. (Code 43)
Catalyst does not see the video card with an error
if I'm disable in the BIOS a discrete video card everything is OK.
as soon as I'm in the BIOS to turn on an external video card in the device manager both cards an error.
I tried to put the first driver on the onboard video card and then on the outside. nothing helps.
please help me before I killed myself.

Hi,
I have a same problem, I bought g505 (bios 3.00) but the wifi not work after few days. I think upgrade the bios, but on the official website was 2.04 version (i not understand, because i have 3.00, i think "downgrade" it), now my bios is 2.04 but the switchable graphics not work, only other option (i not remember it, maybe UMA) work, and I can't finde the 3.00 bios.
Thank for the answer, and sorry my English
Laslie

A705w-Trying to Play Call of Duty 2, error with video card

i get the error message that i dont have the right video card and that the computer hasn't initialized right.
Can i go out and buy another graphics card that will support the game? or should i just buy i new computer. I'd rather just get a graphics card instead of spending a lot of money on a new computer. I went to the website www.canirunit.com which did let me know if my computer was capable of running COD 2, it said that the CPU speed wasn't fast enough and that my graphics card wasn't good enough.
let me know what i should do!

Thanks Jack Black, but I'm afraid the problem is that my Display Driver is not compatible with DirectX 9.0c. The Call of Duty 2 game installs in my computer the Directx 9.0c application, so I do not need to download the program from Microsoft website. However, in spite of having the Directx 9.0c installed in my laptop, it still does not run because I guess the Display driver should be compatible with the new version of DirectX.

Help with Video Card Install on Solaris 8

I have a video card with nvidia4 chipset. After installing solaris 8 on my system I get a screen that is too big to fit on the monitor, so I have to scroll down to see everything. Plus it displays 16 colors. I tried to install the FreeBSD drivers that are availble on the nvidia site but could not run "make" command. Anyone know how to solve this?

There are two options:
1. Install the latest Solaris 8 x86 video driver patch109401-14
available at:
http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/xprod-Solaris_x86IntelDrivers&nav=pub-patches
This may add native support for your nvidia chipset. If it doesn't,
then you have the option to try the new VESA driver which is
included with this patch as well - the VESA driver is supposed to work
on all cards that have the necessary VESA support bios routines.
2. Install the "Solaris XFree86 Video Drivers and Porting Kit"
http://soldc.sun.com/developer/support/driver/tools/video/video-index.html
It adds support for many video cards by using XFree 4.2.0 video
driver modules. It also includes another variant of the VESA driver.

Satellite 5100/201: trouble with video card or overheat?

Hy,
I'm experiencing trouble with video on a Satellite 5100/201. It seems that when I press on the left side above the graphics card or press a key on the keyboard on that side, the screen starts to be scrambled and vertical lines appear. At the end windows XP resets giving a critical error on the device and the video passes to 640x480. Same thing occurs when running Linux Suse 9.0.
My doubt is what is the cause: the graphics card corrupted or overheating due to the fan not as efficient as originally (my laptop is almost two years old. Did someone succed in finding the cause and resolved the problem, also with the Toshiba assistance?
Any help welcome.

Hi,
I don't think so that Toshiba has problems with the design. You are talking about two different models with two different hardware and for different user profiles!
The 1900 is a Desktop replacement notebook with "desktop" components like processors and the Satellite 5000 is a Multimedia notebook!
Hint: If you had not done it yet, perhaps you could install the graphic card driver once again. If this don't helps, it is the best way to recover the notebook with the Toshiba CD. (this set the notebook to software default settings and the notebook should be work)
Bye Bob

Connecting JAVA with Video Card

Hai,...
Can someone tell me how to connect Java with a video card (like Matrox, dec-link, etc)?
Because i want to display a video using that video card to a TV monitor.
Is there any tutorial about this? and about connecting JAVA with other device?
Thank you,
Billy

Hai,...
Can someone tell me how to connect Java with a video card (like Matrox, dec-link, etc)?
Because i want to display a video using that video card to a TV monitor.
Is there any tutorial about this? and about connecting JAVA with other device?
Thank you,
Billy

Problems with video card in CS4

I'm having what I think is video problems since I switched to CS4. No problems with CS3 before, or any other programs except CS4, now. Frequent apparent redraws leave remnants on screen, panels move back and forth, etc.
I have a Dell Precision 490 with 4gb ram and a nVidia Quadra fx 550 with 128 megs of ram. Open GL is enabled. I have loaded all the latest nVidia drivers.
If this sounds like a video card problem, can anyone recommend a good, not too expensive card? I don't play any games, just use the machine for PS. ID and Flash mostly.
Thanks in advance.
Jon

I am having the same problem with CS3 and CS4. Any luck on fixing your problem?
Thanks
andy
[email protected]

Toshiba NB200 with video card went crazy

Hi, I have a big problem with my Toshiba netbook NB200-10J (PLL25E-00300VIT) because after making a backup of HD with Acronis True Image Home 11 (run with recovery discs and not with the software installed on Windows 7), reboot your computer has gone mad.
Specifically, my netbook has an integrated video card (Mobile Intel 945), which can reach a maximum resolution of 1024x600 while the computer after the backup has changed resolution to 1024x768 going even when it is in dos or when I enter the bios (in fact the screens of the bios are cut at the bottom).
I also tried to update the bios by downloading it directly from the site of toshiba but on reboot the resolution is always 1024x768.
Trying to launch a live distro of ubuntu 10 that I had on a CD, I noticed that in this case the OS "Sees" the correct video card he proposed as the possible settings 800x600 and 1024x600 (windows7 what he did before the backup with acronis).
What can I do to restore the situation before the backup ???? ATIH 2011 may have "busted" the bios the onboard video making "believe" on my laptop there is a 1024x768 monitor ????? is there any solution (even under Linux) to put everything in place ?????
Thank you all for the suggestions that I want to provide.

In my XP machine, the display is a setting. I don't know where this is in the registry.
What happens after you reinstall the chipset software and display driver in this order?
Intel Chip Set Utility for Windows XP, 9.0.0.1007, 27/05/09
Intel Display Driver for Windows XP, 6.14.10.4926, 27/05/09
-Jerry

Mainboard msi 9105 with video card vtdr 256 fx 5600

Similar Messages

Maybe you are looking for