Mainnumber configuration setup in Germany/Austria
Hi All,
at this moment I 'm in the middle of a rollout of Voip in Vienna (Austria).
Everything works fine except one thing.
In Austria you can dial to the main to the main number without dialling the 00
As example if you call a user you will dial locally in Viena 8120313-65, the main number in this case 8120313-00.
Both will work
If you dial the main number without the extra 00 it doesn't work , displaying cause = 28 incorrect number.
On the old system it's working.
I miss something, can some one guide in right direction.
Regards,
Erick
Problem has been solved, the telco didn't the send the right digits.
It seems the PBX from +431XXXXXXX disconnects calls with no extension or only one extension ! (cause: Inv.num format -> 28 location:user )
The A1 network sends only extension digits when the are dialed from the calling subscriber ! No further information are send to the PBX !
Only the configuration of DDI ( Direct dial in) in the switch can be modified !
Now the DDI configuration of the Subscriber Number +431XXXXXXX is DDI STND, this means only extension digits are send to PBX.
Other configurations are :
DDI SUBNO = subscriber number and extension number XXXXXXX + extension digits
DDI NATO = national subscriber number and extension number 1XXXXXXX+ extension digits
DDI INATO = international subscriber number and extension number 431XXXXXXX + extension digits
i.e DDI SUBNO sends in the SETUP message: Type of Number: Subscriber ; Number Called: XXXXXXX. And extensions digits in INFORMATION messages !
we have choosen for DDI SUBNO and after changing the dialpeer and transformation rule it works fine.
Similar Messages
-
How do I know if my Samsung Galaxy S3 can be used in Germany, Austria, Italy?
I want to know if I can use my phone in these 3 countries just like I do here in the US. Any help would be appreciated.
Thanks.Hello libba56,
How exciting that you'll be traveling internationally! Sounds awesome! I know the importance of ensuring your Samsung Galaxy S3 will work in specific locations! As glacattack mentioned, the latest software update for the S3 has ensured your phone is now Global ready for approximately 150 countries, including Germany, Austria, and Italy! I have included a link that provides great information for each country! I recommend using it while planning your trips: http://bit.ly/n9PFe9! Here you will be able to find rates for calls, text, data usage, even dialing instructions!
Please let us know if you have further questions!
TanishaS_VZW
Follow us on Twitter @VZWSuppport -
Hello,everyone.
I am using virtex6 FPGA and trying to download mcs file to PROM and have failed.
I download .bit file to FPGA and succeed.
When i try to download .mcs file to PROM XCF128X-FTG64C(BPI Flash) and choose Slave SelectMAP Mode
and the process is about 68% it fails.
The message below the IMapct is as belows:
done.
PROGRESS_END - End Operation.
Elapsed time = 0 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file "C:/Users/Administrator/Desktop/TEST/LED/led.bit"
'1': Loading file 'C:/Users/Administrator/Desktop/TEST/LED/led.bit' ...
done.
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
UserID read from the bitstream file = 0xFFFFFFFF.
INFO:iMPACT:501 - '1': Added Device xc6vlx240t successfully.
INFO:iMPACT - Current time: 2014/3/13 8:48:14
// *** BATCH CMD : Program -p 1
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
1: VCCAUX Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
'1': Programming device...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:188 - '1': Programming completed successfully.
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
INFO:iMPACT - '1': Checking done pin....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time = 23 sec.
Selected part: XCF128X
// *** BATCH CMD : attachflash -position 1 -bpi "XCF128X"
// *** BATCH CMD : assignfiletoattachedflash -position 1 -file "C:/Users/Administrator/Desktop/TEST/LED/leda.mcs"
INFO:iMPACT - Current time: 2014/3/13 8:49:32
// *** BATCH CMD : Program -p 1 -dataWidth 16 -rs1 NONE -rs0 NONE -bpionly -e -v -loadfpga
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
1: VCCAUX Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
'1': BPI access core not detected. BPI access core will be downloaded to the device to enable operations.
INFO:iMPACT - Downloading core file D:/Xilinx/14.3/ISE_DS/ISE/virtex6/data/xc6vlx240t_jbpi.cor.
'1': Downloading core...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:2492 - '1': Completed downloading core to device.
Current cable speed is set to 6.000 Mhz.
Cable speed is default to 3Mhz or lower for BPI operations.
Current cable speed is set to 3.000 Mhz.
Setting Flash Control Pins ...
Setting Configuration Register ...
Populating BPI common flash interface ...
Common Flash Interface Information Query completed successfully.
INFO:iMPACT - Common Flash Interface Information from Device:
INFO:iMPACT - Verification string: 51 52 59
INFO:iMPACT - Manufacturer ID: 49
INFO:iMPACT - Vendor ID: 01
INFO:iMPACT - Device Code: 18
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Erasing device...
'1': Start address = 0x00000000, End address = 0x008CE03B.
done.
'1': Erasure completed successfully.
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
INFO:iMPACT - Using Word Programming.
'1': Programming Flash.
done.
Setting Flash Control Pins ...
'1': Flash Programming completed successfully.
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Reading device contents...
done.
'1': Verification completed.
Setting Flash Control Pins ...
Current cable speed is resumed to 6.000 Mhz.
'1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
`Elapsed time = 814 sec.
and i find many people have met the same thing. But they are spartan series FPGA and i try to low the Resistances of Mode pins,M0 M1 and M2, but the problem does not been solved.
I have read the status Registers and find there is an over-temperature state
and in Impact i could not readback the registers. It is strange.
I am anxious about this problem and have not solved it yet
What reasons may it be?
Hope for your answer, thank youHi~I want to know if you solve the configuration problem for virtex-6?
As I encounter the same configuration problem, I want to consult you with some question.
Can I have your email?
gszakacs wrote:
I have measured the VCCINT and find it is 1.0V, not 2.997V;
That is not at all surprising. I always assumed the problem is with reading the XADC (system monitor) block and not with the voltage or temperature.
my Reference board is ML605
That would have been nice to know at the beginning...
It seems that you have selected the correct mode, assuming your jumpers are set as required in the ML605 Hardware User's Guide. See table 1-27, table 1-33 and the note below it about switch S1.
I'm not that familiar with the details of this reference design, but it may be that the slave SelectMap circuitry requires a reset or power cycle to actually configure the FPGA. Have you tried power-cycling to see if the FPGA boots from the flash?
I'd also suggest that you select the V6 in the JTAG chain view, then go to the debug menu of Impact and select Read Device Status (this is from memory, but it's something like that). That will not only show the bits of the configuration status register, but also describe what each bit means. Among other things you can check the state of the FPGA's configuration logic and the Mode pins.
-
Best practice Forms 10g configuration setup and tuning
Hi,
We are currently depolying forms 10g from 6i client/server version. Users are experiencing Form hangups and hour glasses. This does not happen that often but can happen any time, anywhere in the app (users do inserts, updates and deletes and queries).
Is there a baseline best practice configuration setup anywhere either in the Forms side or the AppServer side of things?
Here is our setup:
Forms 10g (9.0.4)
Reports 10g (9.0.4)
Oracle AppServer 10g (9.0.4)
OS = RedHat Linux
Client Workstations run on Windows 2000 and XP w/ Internet Explorer 6 or higher
Average No. of users = 250
Thanks for all your helpShutdown applications within the guest.
Either power off from Oracle VM Manager or 'xm shutdown xxx' from the command line
It is possible one or more files could be open when the shutdown is initiated.
Have found at least one case of misconfigured IP which would have resulted in the disk access being via the 'Front End' interface rather than the Back End.
Thanks -
Configuration setup forLow Value asset 'Investment support measures'
Hi all
User requested us to enable the u2018investment support measuresu2019 option for low value asset for that if any configuration setup is required to enable the option for low value asset.
Please help us to resolve the above issue and attached screen shot for your reference.
Note: In high value asset user is able to view the u2018investment support measuresu2019 option.
Regards
K.GunasekarThanks
1. Our current requirement is adding new grant book leg to LVC Classs.
2. what will be the impact to our existing assets database?
if not can we follow the below step
we will need to create new LVA class so that grant book leg for LVA can be created. In this case, we will need to transfer assets from the existing LVA class to new LVA class.
Please clarify -
Workflow Configuration Setup.
Hello,
I need to carry out the initial Workflow Configuration setup for Workflow on the development box.
Need some help.
1. List of steps that I need to execute to setup workflow configuration.
2. User Roles that my sap userid should have to execute Workflow COnfiguraiton setup. for example for automatic configuration.
ThanksAs far as I am aware I am fully complying to forum guidelines.
I did not attack
I did not use abusive language
I did search before I posted
And I did not insult.
I did give an opinion and I did ask a question.
It's up to you to answer that question in the affirmative, negative or even refrain from answering at all.
Your choice.
I, as a professional have been frequenting this forum for quite some time AND have been giving some of my vast knowledge and experience back tot this otherwise wonderful community. (see questions:answers ratio )
It might be my problem but whenever someone decides to post a question in a forum I project my own professionalism and ethics and read the post as if I could have posted it.
Call me arrogant but the very least I expect is that the questioner has put some effort into trying to find the answer for him-, or herself before posting a question.
And I hazard to guess that that is the gist that the other Rob is hinting at.
Cheers, have a wonderful life and always endeavor to be the best,
Rob Dielemans -
Withholding configuration setup at receipt from customer level
Hi
This is regarding the WHT configuration setup
when customer deduct TCS and pay the amount, i have configured all the necessary steps
while invoice level, WHT function is working, but not at receipt entry level
suggest me on this what suppose to do
Regards
Govind
Edited by: Govinda Avula on Apr 29, 2008 3:16 PMHi,
Generally you can use the same tax types and codes for customers as the vendor. But i would advice you to have the tax codes seperate so that when you assign accounts for posting, you can assign different GL accounts as per the tax codes.
Note: one issue i faced in using withholding taxes for customers were the differences in the tax deducted by SAP and the tax deducted by the customer. In SAP we might round it off but the customer might not do so. Then you have a problem trying to reconcile the right amount especially when the customer makes a payment against more than one invoice.
Hope this helps.
Thanks and Regards,
Anit -
Standard Configuration setup stalled...
So my standard configuration setup seems to be stuck.
I've tried rebooting and it makes me go through the quick setup again. Though it won't ever finish. Is there a way to skip this part or should I just do ANOTHER clean install?Just ended up doing another fresh install. Don't mess with the machine while it's finishing the setup.
-
Reg:Configuration&Setup guide
Hi,
In our troupe we have implemented one Application (Java/ Oracle) for clients.
And we need to prepare configuration/setup guide for this application
So What information i need to mention in that guide.
could you please help me in this..Rajakumar,
There are almost an infinite number of ways to configure IM, depending on the business processes your client intends to implement.
Start with SAP Best practices config guide for [Materials Management|http://help.sap.com/bp_bl603/BBLibrary/Documentation/104_BB_ConfigGuide_EN_IN.doc].
Other BP guides at [Best Practices (India)|http://help.sap.com/bp_bl603/BBLibrary/Content_Library_BL_EN_IN.htm]
Rgds,
DB49 -
How long does the configure setup take when u first turn on the IPAD? Mine seems to be stuck in the language choice. Help!
It should not be stuck at the language choice. Is there a "Next" button in the upper right corner? Or a blue arrow pointing to the right?
-
Diff between BPELConsole and BPELAdmin (Configuration setup)?
What is the difference between the Configuration setup in BPELConsole und BPELAdmin?
Which one has priority?
PeterConfiguration section in the BPEL Console is used to configure that particular domain for example logging level of that domain whereas BPELAdmin is for managing the domains, like creating a domain, deleting a domain, etc. Hth.
-
IDSM-2 Inline Configuration Setup
Hi ,
Anyone has experience on INLINE configuation for IDSM-2. I have a setup where user vlan (L3) resides in FWSM @ Data Center switch and IDSM resides in another 6509 switch which connects to INTERNET.
Both of these 6509 switch communicates via OSPF.
Any help appreciated.
Thank you
RamaHi,
The IDSM is a Layer two bridge. It will install in vlan 1644 like....
vlan 1644 hosts ----->(dataport0/7) IDSM -----> (dataport0/8)vlan 1645 ------>FWSM---->other vlans
the host will be in access port of vlan 1644, while its gateway interface will be configured with the same subnet ip address on other new vlan 1645....
example:
vlan 1645
exit
int vlan 1645
ip add 10.17.168.1 255.255.255.0
exit
intrusion-detection module 1 data-port 1 access-vlan 1644
intrusion-detection module 1 data-port 2 access-vlan 1645
thanks,
Aman -
Dirsync Configuration Setup Fails
During Dirsync setup after local AD and AAD credentials are entered the configuration fails .
I get the following error
Service MSOnlineSyncSchedule was not found on computer
Using
Windows Server 2008 R2
PaulGreetings, Paul!
This issue might be caused if the service account
MIIS_Service doesn't have "Logon as a service"
permission, to fix this issue, please refer to the suggestions given by Mark Masiak via the following post:
http://community.office365.com/en-us/forums/613/t/54297.aspx
Also, please check if you've opened TCP ports 80 and 443.
Also, please refer to:
http://blogs.technet.com/b/vineethm/archive/2008/08/10/dirsync-faq-before-you-get-started.aspx
Thank you,
Arvind -
Hi,
I would be giving a WAAS PoC to one of our client next week,I have few queries before I implement this PoC
Traffic which need to be optimized Citrix Traffic, File server , Antivirus Update and other customized application
Network Setup :
2 Datacenters and 2 Branch Office conencted via MPLS
Datacentre 1
Core Switch1(WAE 674/NAM connected to Core)--------Router 1--------MPLS Link-
Server Vlan------- |------Router 1 --------WAE(Inline)---------Switch-----User
Core Switch 2(in HSRP Mode)----------------------------------Router 2 --------MPLS Link
Datacenter 2
Core Switch1(WAE 674)-----------------------------------------
Server Vlan------- ----|Router 1--------MPLS Link- ------Router 1 --------WAE(Inline)---------Switch-----User
Core Switch 2(in HSRP Mode)--------------------------------
I need to base line the current traffic using NAM which is installed on 674 VB
1. What are the configuration changes I need do on Datacenter Network and Branch Network device so that can capture the Traffic
2. If i have multple server VLAN and what rules or access list I need to mention on Server VLAN should I apply redirect in and out on all the server VLAN which I need to optimize so that it direct to WAE device for optimization
Planned to configure the Datacentre WAE in WCCP2 Mode and Branch office in Inline mode...
Also please help me if there are any documents for WAAS PoC Implementation.
Regards
Rebbie..Hi Kiran
Thank you .
It will help me a lot in my PoC
Also as I mentioned earlier I am planning for baseling the current client infrastutrure using NAM on WAE 674 at datacenter
My Plan :
1. Connect the Central Manager - VLAN 10
2. Connect the WAE/ NAM Device - VLAN 20
3. Connect the Branch office WAE in Inline mode
4. Enable Netflow on 6509 Core switch
Interface
ip route-cache flow
exit
ip flow-export version 5
ip flow-export destination 3000
snmp-server community RO
5.Enable Netflow Data Source on the NAM VB
My question :
1. what kind of Preventative measure I need to take and what are the configuartions changes I need to do on the core switch and Branch office WAE so that I can capture the complete traffic to an fro from the datacentre to Branch Office.
2. Since I am connecting the WAE device at The Branch office and Datacentre simuntaneously but In Datacentre I am not enabling the WCCP2 Redirect initially as I am planning for Network Baseline using NAM and now since I have not redirected the traffic to WAE at datacenter what will happen to the traffic at the Branch office WAE(already connected) will it work and will it allow traffic without optimization or should I connect this device after the Baselining is completed?
Or
3. Should I configure the WCCP2 and redirect all the Traffic to WAE(Without Optimization enabled) before the baselining activity so that WAE device can provide me the Before and After report to demonsrate the impact of WAAS?
As per your suggestion this is what I have preapred my WCCP2 Redirect List on core switch - Please ratify if there is something which needs to be changed
ip wccp version 2
Access List for redirection
access-list 100 permit ip X.X.X.0 0.0.0.255 any
access-list 100 permit ip any X.0.0.0 0.0.0.255
access-list 100 deny ip any any
ip wccp 61 redirect-list 100
ip wccp 62 redirect-list 100
int vlan 111
description *** WAN Optimiser ***
ip wccp redirect exclude in
int vlan 10
description *** Citrix Server VLAN ***
ip wccp 61 redirect in
int vlan 20
description *** Symantec Server VLAN ***
ip wccp 61 redirect in
int vlan 30
description *** File Server VLAN ***
ip wccp 61 redirect in
int Gig 16/0
description *** Connected to Router***
ip wccp 62 redirect in
Regards
Praveen -
RE: SNC configuration setups
Dear Experts,
I would like to know that , once SNC is configured and setup in the application server does all the SAP GUI connections to the Application server must be of SNC (SNC name)
or do we have option like normal and SNC name connection both can be applicable to connect to the server from the SAP GUi.
Appreciate your help.Hi Rajendran,
Both type of logons are allowed however following profile parameter need to be taken care of:
snc/accept_insecure_gui.
If its value is set to 1 insecure login is generally allowed.
If the value is U then insecure login is permitted according to user,
depending on the flag in the user master record
If the value is 0 insecure login is not permitted at all.
Hope this helps. Please award points for useful inputs.
Regards.
Ruchit.
Maybe you are looking for
-
Extract a/c assignmnet group KVGRM from MVKE table
Hi Gururs! I would like to add a field KTGRM in my query which uses MAST and STPO tables . This si an additional field that I am trying to add. When i just relate the material to material with the fileds form MAST or any other material table I am abl
-
Sharing airport network connection to an airport base station over ethernet
Hi there, I've got a network connection to the internet via Airport, on my iBook G4 with OS X 10.4.9. This iBook is connected to the LAN port on an Airport Express base station (for physical wiring reasons, it cannot be connected to the WAN port). Th
-
Syncing iTunes across Different Platforms (Windws & PC) - Mac Version
I'm not sure where to put this questions so I'm adding it to the iTunes for Windows section as well. I have an iTouch that I have been using on my Windows platform iTunes. In addition to music, I also use iTunes to sync up my contacts and calendar li
-
How do you reload an episode of a series?
How do you redownload an episode of a tv series?
-
Talent Management - Performance Management
Hi all, I want to know if there is possible to setup different appraisal forms (VA) for different personnel groups (like executives, managers, analists, etc.). I have make the customizing but only one form is used to evaluate all employees. Thanks in