Mains Charger not working

When I plug my mains charger into my blackberry curve, it recognises the charger is plugged in, as the charge symbol appear, and then after about 10 seconds it dissapears and stops charging. This is only an issue with the mains charger as it charges fine on the car charger. have tried other mains charger so know it is not a fault with charger itself. Can anyone help at all?
cheers
x

If it charges fine with the car charger we can assume that the charging port is ok. If your main charger works intermittently but other wall chargers work fine, I would assume that your wall charger is faulty and nees to be replace.
Message Edited by jrdante on 10-19-2008 12:46 PM
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

Similar Messages

I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

Are you connecting your iPhone directly to your PC or to a USB hub?

The optical drive red light stays on, no sound in OS X, the car charger not working

The optical drive red light stays on, no sound in OS X, the car charger not working, I think that its all tied to 1 error or 1 issue, maybe something to do with the boot camp file?
Any ideas ?

Hi S,
There is a switch inside the audio jack that may be stuck. Try gently inserting, wiggling, removing the audio plug.

Macbook 6,1 charger not working

Macbook 6,1 charger not working A1344
The Macbook is a 6,1 purchased in 2010.
My friend has had a go at the shooting suggestions but nothing seems out of sorts beyond it not working properly.
No damage or signs of misuse.
Ordinarily I wouldn't have thought a warranty would still apply but this paragraph on Apple support page made me wonder.
--- Whether your product is in or out of warranty, you can take your adapter to an Apple Authorized Service Provider or Apple Retail Store for evaluation and replacement if necessary. Pending the results of the evaluation, you may or may not be eligible for a replacement adapter free of charge. Signs of accidental damage would negate any coverage. Be sure to bring in the computer used with the adapter; it is required to process potential adapter replacements.---
When my friend took the Macbook and charger into an Apple Store in central London she was told it's out of warranty and best option is to just buy a new one.
Any thoughts regarding whether Apple has approved free replacement for these chargers?
She is in UK but machine was purchased in Australia
http://support.apple.com/kb/TS1713
thanks
Jason

all sorted now - new charger given
turns out a bit of intelligent discussion yielded results
so .. if you have any problem with an older mac take it into an Apple Store
theres an excellent chance they will fix and replace even when the machine is out of warranty

HT4623 my phone main button not working after installed new version software 7.0.6

my phone main button not working after installed new version software 7.0.6

Arrange some liquid like petrol spirit and w 40
two drops in to home button.
30 times press slowly slowly and then restart your apply iphone.
You will get ready.
I am sure. Thanking you...

Charger not working after upgrade iPad air to ios8

My iPad air charger not working after install ios8, can anyone help please, thanks

Hey andon,
The “voice-to-text” feature you are referencing uses Siri to translate your voice into text, so you will want to use the following article to help you troubleshoot this issue:
iOS: Troubleshooting Siri
http://support.apple.com/kb/TS4079
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Genuine Apple lightning charger not working with my iPhone 5S. a notification comes up that's says 'this cable is not a genuine Apple product and may not work reliably' and although the charging symbol comes up, it does not charge

genuine Apple lightning charger not working with my iPhone 5S. a notification comes up that's says 'this cable is not a genuine Apple product and may not work reliably' and although the charging symbol comes up, it does not charge - went to Apple in Milton keynes to get a replacement charger this weekend that does not work as well!

Well, if this problems is so old I think it is strange that Apple hasen't fixed the bug long time ago, and certainly after the release of iOS 8.1.
Well, thank you very much for your answer, Lawrence Finch. I think the best thing to do is to send the phone to repair, if there is no solution to fix this by my self. I will anyway call the Apple support tomorrow, but I don't think they will illuminate me...

Main Socket Not Working, But Line is via Another L...

Our main socket is not working -- ie, when a phone is plugged in, there is no signal/dial tone. However, the line still works via a line box in another room. Is this a BT fault? If not, how can I get it fixed? Thanks.

Hi Elsiejean
It is possibly not a fault some properties/businesses have multiple service points/sockets in, you can check this by calling BT and request to check this,did you pay a connection charge? if not BT will have carried out a check on the property prior to you moving in and for example may have found multiple lines so the main one you say that does not work may have been ceased meaning an engineer/installation charge would apply and the latter which you say worked may have just been a stopped line or takeover connection hence they choose to use that one,i could be wrong if it's only one line your main point may be broke does the working socket have a BT openreach logo on or is it a extension.also BT have supplied you as agreed so if you do need an extension or other line already present activating you would have to pay 127.99
Inherent omniscience - the ability to know anything that one chooses to know and can be known

Powerbook g4 charger not working, changed fuse and still no luck

I've got a powerbook g4 laptop. A few nights ago the charger just stopped working. The wire is totally intact and we have tried changing the fuse within the plug but it keeps fusing out and still not working. I really don't want to buy a new charger as I've bought at least 6 over the last 5 years (through the wire fraying) AND replaced the battery once already. Is there anything I can do to fix it?
Thanks!

You must be remarkably hard on your adapter cords. I packed my Powerbook and adapter up and unpacked them again at least daily for six years and my original adapter is still working fine.
If the port to which the adapter cord connects in your Powerbook is at all loose or wobbly, your DC-in card is shot, and that may explain why your fuse keeps blowing. If you're in the habit of tripping over your adapter cord, that would explain both the long sequence of ruined adapters and a broken DC-in port/card in the computer.
Unless you plan to treat your adapter more gently in the future, buying an inexpensive third-party adapter instead of an Apple unit would be a good idea.
http://eshop.macsales.com/item/Other%20World%20Computing/ACADPTG4/
Message was edited by: eww

Query in Main Task Not Working But it works For BG Task

Hi All,
I have a requirement to send work item to different level approvers for that i have to find final level approver from a table and save the data accordingly ,
i have a main task and a Background task
<b> my problem is that the same query that works in back ground task is not working in the Main Task.</b>
SWC_GET_ELEMENT CONTAINER 'LEVEL' Level. is a macro written in the method in BOR in main task for getting value which is in the WF container and has binded to the task container. it is not picking up the value from the task container to the method.
Please help me on this
Thanks & Regards
Hari Sankar M

hi Arghadip Kat,
Thank You for Your Response, i've tried ur Suggestion but it is again not working
just let me explain again
i have two tasks,(these two tasks are in a loop.) with one BOR(object) and two Methods
One Method is for first Main task and another is for second task(which is a background task)
i need to get a value called final from a table, i've written a query in the method of Back ground task. and i'm getting the value correctly but i'm not able to pass this value to the main task coz the loop exits after executing the subtask and coz loops exit point is the value final.
So for getting the value of Final in main task i've written the same query in main task but its not working.
Thanks & regards
Hari

HP G60-458DX AC Charger not working

So today, my AC charger stopped working, which wouldnt be too much of a problem except my battery life is abysmal and I have 2 papers and a presentation due this week.
Does anyone know the steps to get a new one ASAP?\
Thanks for the help

In general, you can order the AC adapter directly from HP or you can try eBay. Unfortunately, you forgot to mention the model number of your notebook and the Forum members can NOT guide you to the correct web page so that you can order the AC adapter.
This is an end user Forum and most the members are not HP/Compaq employee. You may need to email the HP/Compaq service center if you need feedback or reply from HP directly.
Provide either your notebook model number or the part number of your AC Adapter and we can proceed the next step.

Macbook pro charger not working sometimes

Sometimes my macbook pro would not work.. but then other times it would work.. I don't know what's going on and what to do to fix it. My charger also started to be like this today.. on my 1 year anniversary with this macbook -_- Any solutions to?

Do a SMC Reset and follow the Magsafe links here
 Cheat sheet to help diagnose and fix your Mac
Backup your data!
 Most commonly used backup methods explained

Main Dial not working in Canon 60D

I purchased my 60D kit last month. yesterday, I found that the main dial is not working as it should. It rotates left and right, but no effect on the shutter speed or any settings that uses the main dial, i am always using the manual settings, any suggestions?
Thanks in advance

UPDATE:
okay.. I have deattached the battery grip and insert one of the batteries in the camera, and found that the main dial is working smoothly. So, now is the battery grip affecting the main dial job in the camera? or because its aftermarket?

Lumia 920 Wireless Charging not working - Known is...

I have a Nokia Lumia 920, which works perfectly fine. I haven't had some of the other issues reported here with freezing, apps, etc.
I have a Nokia charging plate and I've found that no matter what I do the wireless charging plate absolutely does not work. I've turned off Bluetooth, Wifi, turned ON Battery Saver, disabled every background app, even hard reset my phone and tried charging it from stock. The wireless charging plate doesn't even maintain the current battery state - The battery slowly drains hour by hour. I've also tried placing the phone on the charging plate in different positions to ensure it's making good contact. Nothing works.
Is this a known issue? Is there anyway to identify a defective phone? Is there a possible fix for this? I love my Lumia, but this a killer feature I would expect to work consistently.

OK, this thread is odd. My charging plate works fine. It has a side with a little ring and Nokia in it, and the other side has an oval of rubber around the periphery with the usual conformance writing on it that side Qi, CE, don't throw it on the trash icon, Mine works just fine with the Oval down, and the Nokia in the ring up. Is that not what others see?
I can turn it over, but it is touchy as to whether I can get the light to come on. Usually not. I assumed, initially, the oval went down to keep it from sliding around on the table, and Nokia went up because they want you to know it's Nokia. Has always worked that way. I wish there was a larger rubber something on the 'top' as the phone can slide and spin more than I think it should.
For what it is worth, I much prefer the charge stand, but the plate is more convenient if I am going to travel somewhere for a while. Couple of days, just charger, week or so, might bring the plate for the hotel.
BTW, I do get the connect noise when putting it on the charge plate. Sometimes it can take a second otr two. When I take it off, it can take several seconds to get the disconnect noise and the charging icon to go away. If I put it back on the charger before the disconnect noise and the charge icon goes away, it does NOT make a connect noise, though the light comes on. The light will also eventually go off at full charge.

APPLE CHARGER NOT WORKING WITH IOS5

Hello,
      Upgraded ipad 1 to ios5. Apple charger, A1357, no longer works.
     I get this message:    "not charging" in upper right corner.
     When I use my tripp lite power strip with usb port, I get : Charging is not supported with this acessory.
     It will be hard to use this ipad if I cannot hook it up to power.
     18% power remaining.

I should add that the tripp lite charger was working before as well.

Mains Charger not working

Similar Messages

Maybe you are looking for