Mainstage 2 and Kontakt 5 running at the same time?

I use MainStage 2 and Lion running on my MacBook Pro 2.3 i5 8GB Ram. When I use only Kontakt 5 latency is low, but when I in addition start up MainStage 2 I get pops and crackles. Can not Kontakt 5 and Mainstage 2 run side by side? Is this normal?

I just think its kinda funny, since I use MainStage ONLY for changing patches on my three synths - no softsynth at all, and use Kontakt 5 mostly for playing one Rhodes sound, sometimes I layer two sounds at once. The CPU is not very high, just seem like Kontakt and MainStage will not work well together. Mayby using a SSD for the samples would help ...
(Sorry. By mistake I pressed the "Correct answer" on my reply )
Message was edited by: HowardPain

Similar Messages

Windows 7 and OSx running at the same time

I have both Windows 7 and OSx Lion installed on my macbook pro.
If I run Windows 7 with VMware Fusion would i need more RAM so my laptop could run faster. or would the RAM not effect at all?

Yes more RAM would always be better up to a Point. About 8GBs is the sweat spot.

Running windows and OS 10 at the same time.

I am going to order a new iMac. I want to be able to have windows and Mac running at the same time. I will be using two monitors. My question is would I be better to order more ram, or the fastest processor to optimize the performance? My brother has a mac book pro running parallels, he says that it works or but is quite slow. Any help before I order my new iMac would be appreciated.

More RAM would speed things up more when handeling multiple applications at the same time.
(Borrowed from Kappy)
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

Can a vodcast and a photocast run at the same time ?.

Hi,
I would like have a video podcast play and a photocast run at the same time is this feasible?
Geoff

Since they're different apps and there's no way to sync something like that: no. Sounds like you could just do a video slideshow to me. That's supported by all major video creation apps.
-S

Can I run a podcast and an app at the same time?

Can I run a podcast and an app at the same time?

Yes for most. You can run a regular app with an audio podcast. I do not know what could run with a video podcast.

Dreamweaver and Fireworks won't run at the same time

Recently, I've run into a problem where I cannot run Dreamweaver and Fireworks at the same time.
I have Dreamweaver CS4 & Fireworks CS4, which I can still run at the same time.
However when I run Dreamweaver CS5.5 and try to launch Fireworks CS5.1 I get a C++ Runtime error in FW CS5.1.
And when I run Dreamweaver CS6 and try to launch Fireworks CS6, Fireworks CS6 freezes before fully loading.
If I run DW CS6 and launch FW CS4, I can get them both to run together, but when I close FW4, DW CS6 crashes.
Any suggestions would most appreciated.
David

Historically, I've always kept prior versions installed because sometimes, albeit infrequently, I need to access extensions that aren't compatible with the newer versions of CS. Since I can run DW & Fireworks CS4 together, I'm inclined to leave them installed.
I've thought about uninstalling CS 5, but I don't think that would resolved my issue. I've already tried most of what's in the Adobe troubleshooting suggestions save for creating a new administrator account.
I think I'll hobble along with my current workarounds since I'll be migrating to a new computer very soon, which should acomplish what creating a new administrator account would. I'll probably limit the reinstall to CS 6 to eliminate any issues that might be related to having multiple versions installed, which in reality shouldn't be an issue because again, I've always done that successfully in the past.
Thanks for the suggestion just the same.

Getting 'Paint' and 'Sales History' to run at the same time

Hi,
Is this a matter of setting up a port for Paint and another for SH? Is there a limit to the number of OBI repositories that can be running at the same time?
Thanks!

Thanks.
Can two or more repositories exist in the same rpd file? Can Paint and SH be in the same rpd file and be used by seperate groups that access completely different data sources?
In our case, the dimensions and facts for glass used in a car are very different from the dimensions and facts for a car's transmission. There are similarities, true, but they are still very different.
So, in one rdp file can there be seperate presentation folders for Glass, Tires, Transmissions, Seats, Axil, Engine, Steering Wheels, Head Lights, and etc...
Each presentation folder would be used by different people. Each presentation folder would access different tables. The Glass Parts business will use the Glass presentation folder, the Axil Parts Guys will only use the Axil Presentation Folder, etc..
As always, thanks!

I have a mac book pro i7 2.00Ghz and 4Gb RAM. I want to run at the same time Omnisphere,Trilian and BFD 2. Will it work fine? Anybody that has some experience? Thanks

I have a mac book pro i7 2.00Ghz and 4Gb RAM. I want to run at the same time Omnisphere,Trilian and BFD 2. Will it work fine? Anybody that has some experience? Thanks

Well this is not a problem I have already bought one, my great worry is the processor and the memory..

I am using several Macs running Yosemite. I was recently "upgraded" to Xfinity's new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for

I am using several Macs running Yosemite. I was recently “upgraded” to Xfinity’s new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for the Ghz. However when I connect to the 5Ghz the Time capsule disappears from the Airport Utility and claims to be Not Found. Is there something I have done wrong or just a Yosemite Teething Problem

First restart your mac and try again.
It could be
that the router and the TC are interfering wirelessly with each other.
You can check this by pressing the option key while clicking on the wireless icon on your screen
Open Wireless Diagnostics
enter your user password
Press CMD 4 then Scan
You will see all the wireless channels being used in your location and you can check if they are on the same channel
Make the SSID for the TC simple like MyTC
Set 5Ghz to auto
Update the TC
Try again
Ted

Can i run remote memory profiling and remote debugging at the same time .

can i run remote memory profiling and remote debugging at the same time .
i am using jdev9.0.5 and oc4j9.0.4 standalone server.
how to write the batch file to run both at the same time

Thanks for your help!
Another question. How do you turn off the ATT wireless transmitter? Also, there are more computers connected to the 2Wire network. I will have to set up a wireless pc to work with the Base Station after disconnecting the ATT transmitter. Easy answers for both, I hope?

Can i run remote profiling and remote debugging at the same time

can i run remote profiling and remote debugging at the same time .
i am using jdev9.0.5 and oc4j9.0.4 standalone server.

i think i am wrong

Two processes running at the same time in Lookout

I have installed Lookout 5.0 with 200 I/O Points onto our server computer. The application of motion control is next to the 200 I/O points through OPC PMAC server/client. Now I would like to have a second process in the same server for trouble shooting and testing without stopping the motion control process. However, this second testing process could have also many I/O points through Serial and USB ports. I assume that the total amount of I/O points of both processes will be greater than 200.I prefer to have independent processes for control and testing because access levels. Can I have these two processes running at the same time when needed?

Hi,
From your description you are using a third party OPC server for the motion application. You could have a second Lookout process communicating with the same OPC server with no problems, as long as you do not exceed the number of I/O points your license supports.
Also, the process you are using for testing obviously could not overwrite datamembers (or registers if you will) that would interfere in the overall application, in other words you can test your application as long as you keep the coherency of the test.
So the answer would be, yes it is possible, however you are still limited to the number of I/O's your license supports... You may even consider upgrade the number of I/O's you have in your license.
Best Regards
Andre Oliveira

Multiple scripts running at the same time?

Is there a way to have multiple scripts successfully running at the same time?
At the moment if I start a second script while the first one is still running, the second one completes successfully but the first one stops. This seems to be because the first one is no longer the active document once the second one opens so can't continue.
Is there another way to script things like this so that multiple can run independently at the same time? You might ask why I'd want to run two at the same time and not just wait, but i've setup an asp.net web form front end and having problems if two people click the button around the same time.
I'm guessing this isn't going to be possible and i'm going to have to look for ways of doing this in asp.net instead and somehow queue the requests so you have to wait longer if the script is already running?
Thanks,
Andy

I'm
guessing this isn't going to be possible and i'm going to have to look
for ways of doing this in asp.net instead and somehow queue the requests
so you have to wait longer if the script is already running?
This is correct. The scripting interface to PS is single-threaded so you will need to queue up requests.

How many threads can be running at the same time

Hi!!
Dows anyone knows how many Threads can be running at the same time in the JVM.
I'm making a multi thread client-server app and I would like to know how much simultneous connections the JVM support. I'm using one Thread per connection.

Hi, thanks to all for your answers.
I think that I made the wrong question, as you said: "that means the number of threads currently created".
I'm worry about this because my application is already online (It's a mail server -SMTP and POP3 server using ORACLE for the users database- ) and some other user post in the "multi-tread forum" that almost any JVM can only have 700 threads created at the same time, and I've never heard or read anything about this.
what you mean with the stack space (memory??)
I'm using the JavaWebServer 2.0 and a servlet to start the main Thread.
Again Thanks to all for the answers but I think that the schapel answer is the one that solve my doubt...

Bash script: Rotate your wallpaper and SLiM theme at the same time

EDIT;
I've decided I should really thank Cerebral for his help with writing this script; this thank you should have been here from the get go.
After writing:
#!/usr/bin
echo "Hello World!"
I wrote a script to rotate my fluxbox background and SLiM theme at the same time, so I could have a contiuously changing background and still have a smooth transition from SLiM to fluxbox. (It just looks so much cooler when both have matching backgrounds). By the time you finish reading it, and configuring your box so it will work, you will probably have decided you could have writtin your own, better script to do the same thing. But, on the off chance anybody finds use for it, here it is:
(this should be obvious, but: don't run this script without at least reading the comments)
#!/bin/bash
#this is a script to rotate a number of backgrounds
#to be shared by the fluxbox desktop and SLiM login manager.
#it is the first meaningful script I've written. It may be
#freely distributed and used with the understanding that you are
#using it at your own risk.
#Before running this script you need to check that your SLiM
#themes are installed to the path /usr/share/slim/themes, which
#is the defulat path for installation in Arch. Here are some
#other things you need to set up:
#1. create (if you don't have it) the directory /usr/share/wallpapers
#2. create a wallpaper in /usr/share/wallpapers called 'dummy' by copying
#you current wallpaper to that filename
#3. set your window manager to display the wallpaper 'dummy', this works fine
#using a style overlay in fluxbox, I haven't tested it with any other window
#manager, but I don't see why this would cause a problem.
#4. create a directory /usr/share/slim/themes/current, you can copy one of
#your slim themes into that directory if you want. (this will prevent you
#from seeing some error messages the first time you run the script)
#5. define the names of the themes you want to rotate, in order for this
#script to work, you must name them "themeNUMBER", where NUMBER is replaced
#by an integer. Your themes must be numbered consecutively, start with 1
# that is:
#theme1 , theme2, theme3, etc. , theme305
#If you don't number consecutively, this script will not run properly. You
#must also define the total number of themes as "rotate_number"
#6. Check if the script runs, if it does, you should change /etc/slim.conf to
#use the theme "current"
#7. This theme will now rotate your SLiM theme and wallpaper in such a way as
#to make them match each other. Note that SLiM will not let you change themes
#"on the fly", (as of July 6, 2008), so changes will not be apparent unless you
#restart SLiM. I run the script before I run slim in my etc/rc.local local
#script, so each time I reboot I get different wallpaper / login background.
#Fred Drueck 2008
#Define here all themes to be rotated and the total number of
#themes to rotate:
rotate_number=9
theme1=/usr/share/slim/themes/default
theme2=/usr/share/slim/themes/lake
theme3=/usr/share/slim/themes/lunar
theme4=/usr/share/slim/themes/flower2
theme5=/usr/share/slim/themes/the-light
theme6=/usr/share/slim/themes/mindlock
theme7=/usr/share/slim/themes/parallel-dimensions
theme8=/usr/share/slim/themes/wave
theme9=/usr/share/slim/themes/fingerprint
#check you are running this script as super-user:
if [ $(id -u) != "0" ]; then
echo "You must be the superuser to run this script" >&2
exit 1
fi
echo "rotating themes"
#figure out which theme is currently set, then name it as the variable
#"last theme number", otherwise set last theme number as 0
if [ -f /usr/share/slim/themes/current/current_theme_number ]
then
echo "checking current theme"
cd /usr/share/slim/themes/current/
eval last_theme_number=$(cat /usr/share/slim/themes/current/current_theme_number)
echo $last_theme_number
else
echo "no theme is currently set, using theme 1"
last_theme_number=0
echo $1 > /usr/share/slim/themes/current/current_theme_number
fi
#set the new theme number
eval new_theme_number=$(($(($last_theme_number % $rotate_number))+1))
#select the new theme
placeholder=theme
eval new_theme=\$$placeholder$new_theme_number
echo $new_theme
#now clean out the "current" theme where I keep the current
#theme for slim
rm /usr/share/slim/themes/current/background*
rm /usr/share/slim/themes/current/panel*
rm /usr/share/slim/themes/current/slim.theme
#the wildcards are there since the themes use jpg and png files
cp $new_theme/background* /usr/share/slim/themes/current
cp $new_theme/panel* /usr/share/slim/themes/current
cp $new_theme/slim.theme /usr/share/slim/themes/current
#increase the theme number, but first clear the old file
rm /usr/share/slim/themes/current/current_theme_number
echo $new_theme_number > /usr/share/slim/themes/current/current_theme_number
#copy over the dummy wallpaper in "/usr/share/wallpapers" (with the theme
#background file
cp $new_theme/background* /usr/share/wallpapers/dummy
exit 0
Last edited by pseudonomous (2008-07-07 21:59:42)

oh i forgot to mention... its rotating while moving. i.e. is doesn't have to stop rotate and then continue back to origin.

Mainstage 2 and Kontakt 5 running at the same time?

Similar Messages

Maybe you are looking for