Mainstage 2 external fader assign to mainstage 2 fader

Hi,
I am trying to assign my external hardware mixer fader to mainstage software fader.
If i touch any button on my hardware mixer : fader volume, play stop etc. the midi info window
in mainstage (top center) indicate that midi is communicating with mainstage.
I am trying to assign my hardware external fader 1 to 8 and the master fader to my mainstage software fader.
I can't find the way to assign them to the mainstage mixer.
Anybody using a external mixer with mainstage instead of a keyboard?
Thanks
Luc

Thank you for takiing the time CCTM
Basically, i was able to build faders into layout. assign them to my MS faders into edit. I was also able to assign the Tascam FW1884 fader to the MS faders but they act like crazy moving up right away and down without any slow motion like a volume fader would do. i think it is the way the cc are read or some sort of midi programming?
I am totally new to midi stuff so... I tried to change my midi to mackie control emulation and i was able to get the fader move normally in the layout mode until i remove my finger from it. after letting go the cursor the left inspector option are change auto: the channel option, type option, the number option change automatically to new values that make the fader act like a on off button instead of a fader?
i thinking about using my boss gt-8 then. Using footswitch to press play, next song etc. again that is probably a lot of programming to match MS buttons and options? i will have to figure out the midi mapping if i can't get my FW1884 to work the same midi language...
Do you have any advice
Thanks again grealtly appreciated french guy so excuse my english
Luc

Similar Messages

No external no.assignment possible for material for material type HALB??

no external no.assignment possible for material for material type HALB??... message no:m3317
i got this error msg while i try to create external material via mm01
material: pump
industry type: mechanical engineering
material type: semi finished product
after pressing enter error came...

Hi
If you created number range already, then you need to remove the number range and recreate the same with external number range w/o check
Try it out.
Thanks
Raman

No external transaction assigned to internal transaction 0020 / 0010

Hi gurus..
While iam doing invoice its shows error like
"No external transaction assigned to internal transaction 0020 / 0010"
Where i need to maintain external transactions?
can any one please tel the complete path for that...
thanks...

Hello,
Financial Accounting / Contract Accounts Receivable and Payable / Basic Functions / Postings and Documents / Document / Maintain Document Assignments / Maintain Transactions for IS-U/IS-T / Maintain Transactions for Cash Security Deposits/Interest
There, go to Define Main Transaction, select main transaction 0020, double click Define Sub-Transactions, select subtransaction 0010, double click Allocate Transactions to Internal Transactions and do the allocation there.
If you didn't define the combination of main transaction and subtransaction for cash security deposit payment, do that first, then follow the steps described above. If you define other main/sub transaction (for example AAAA/BBBB), replace "select main transaction 0020" with "select main transaction AAAA", and "select subtransaction 0010" with "select subtransaction BBBB" in the steps above.
Hope this helps.
Bogdan

External numbering assignment for Handling Unit

We are activating HUM in our facilities. We currently assign an alphanumeric number to our SU's and when we turn on HUM and try to pack the SU with the alphanumeric number into a HU, the validation routine in the function check_number fails, the SU number is not in the correct range. How can we get past this validation and continue to use the alphanumeric SU tags within HUM

hi,
if i m not wrong then u will get serial no. by using follwing FM.
TABLES: RSEROB.
DATA : S_LV_IRSEROB TYPE STANDARD TABLE OF RSEROB WITH HEADER LINE,
S_LV_ORSEROB TYPE STANDARD TABLE OF RSEROB WITH HEADER LINE,
WA_RSEROB TYPE RSEROB.
refresh :S_LV_ORSEROB, S_LV_IRSEROB.
clear : S_LV_IRSEROB , S_LV_ORSEROB.
S_LV_IRSEROB-TASER   = 'SER01'.
S_LV_IRSEROB-LIEF_NR = ur delivery no..
S_LV_IRSEROB-POSNR   = ur delivery item.
APPEND S_LV_IRSEROB.
CALL FUNCTION 'GET_SERNOS_OF_DOCUMENT'
    EXPORTING
      KEY_DATA                  = S_LV_IRSEROB
STATUS_PRE_READ           = ' '
EQUNR_CORR                = 'X'
    TABLES
      SERNOS                    = S_LV_ORSEROB
SERXX                     =
   EXCEPTIONS
     KEY_PARAMETER_ERROR       = 1
     NO_SUPPORTED_ACCESS       = 2
     NO_DATA_FOUND             = 3
     OTHERS                    = 4.
if this is helpful write to me.
i wl help u more
Edited by: MONIKA DHUMAL on Mar 25, 2009 5:46 PM

Dep number range issue (External Assignement)

Dear All,
i am getting error wile posting Dep (AFAB) for external number range assignment for Document type AF (Dep Posting in Current Year, but in last year it get posted with internal number range only)
See the error.
Create document number range 03 using external number assignment
Message no. AA759
Diagnosis
Processing had to be terminated, since you set up the document number range 03 for the year 2011 with internal number assignment.
System response
You should create a document number range with external document numbers for periodic depreciation posting, since the document numbers are not assigned from Financial Accounting, but by the posting program of Asset Accounting. The external number assignment, therefore, should not be understood as manually entering the document number. It is only external from the point of view of the Financial Accounting application.
Procedure
Change the number range 03 from internal to external number assignment in Asset Accounting Customizing.
Why system is behaving like this. It should be internal number range as i post the Dep in other clients and it is working properly with internal number range.
Kindly Suggest
Regards,
Shayam

Hi
SAP itself contradicting his own statement.
When i create external number range assignment in one of the other client system show me the message.
Create document number range 04 using internal number assignment
Message no. AA776
Diagnosis
Processing terminated because the document number range 04 for year 2011 was set up with external number assignment.
System Response
For periodic posting of depreciation, you have to create a document number range with internal number assignment, since the document numbers are assigned from Financial Accounting.
Procedure
Change the number assignment for the number range 04 from external to internal in Customizing for Asset Accounting. See SAP Note 890976 for more information.
Now what to do kindly advice.
Regards,
Shayam

Assign External Number to BP

Hi Experts.
We are using Standalone SRM.
In this how to assign external number to business partner.I have checked in BUT000 table for my Business partner, in this i can't get any external number assigned to business partner.
Please tell me how to assign external number to BP.
Regards,
Chandu

Hi Chandu
External number range means some external system provides number range for vendor other than EBP
Plz visit BUCF - tcode for BP no range. for eg you pulled same vendor number from r/3 to ebp and it must flag in srm as external.
also see this.cross apllication components->SAP business partners>Business partners>basic setting> number ranges and grouping>Define grouping and assign numbe ranges.
What is your master vendor database system ebp or some external system. if you create a vendors in srm then it is internal only .if you get a vendor from external system then only external possible.
regards
Muthu

Externally Assigned UPC/EAN Codes

Hi All,
       I'm having issues with assigning UPC codes for a UOM for a material. I need to have a 14 digit UPC code having 00 as a prefix. Ic reated a number range and created a EAN category.
EAN Category Details -
Number range object EUROPARTNR Intl Article Numbers
Int. number range
Ext. number range    18
Check-digit algor.   1 Standard EAN check digit algorithm
Fresh produce prefix 00 USA and Canada (UCC)
EAN length           14
Now whenever i try to assign an external UPC for this category, i'm getting an error -
The EAN 8452599000046 may not be assigned externally
    Message no. WE 216
Neither it is picking the prefix 00 nor it is letting me create a UPC code. When i change the number range to an INTERNAL number range, it works perfectly fine. But we need this to have external number assignment. Please help.
Thanks,
NK

Can someone help me on this please.

T code reqd for External No range which is reqd at the time of posting AFAB

Hi Gurus,
While i am running AFAB,the system shows that i have to give external no range for doc type.I have given no range in FBN1 but system denies.Can pl provide T code for external no range which is reqd for Depn run.
Pl advise.
Regards,
Samar

Hi Guru,
Thanks for your reply.
After running AFAB,follwing error comes:
"Create document number range 24 using external number assignment.
Message no. AA759
Diagnosis
Processing had to be terminated, since you set up the document number range 24 for the year 2008 with internal number assignment.
System response
You should create a document number range with external document numbers for periodic depreciation posting, since the document numbers are not assigned from Financial Accounting, but by the posting program of Asset Accounting. The external number assignment, therefore, should not be understood as manually entering the document number. It is only external from the point of view of the Financial Accounting application.
Procedure
Change the number range 24 from internal to external number assignment in Asset Accounting Customizing."
Now pl advise me how i can change no range from internal to external.
Regards,
Samar

Transfer customer specific Roles assigned to a customer from R/3 to CRM

Hello dear all,
on R/3 side there are customer specific roles defined and assigned to customers. These roles are sales area depending.
On CRM side we plant to uses the Employee Responsible relationship to build up these customer specific roles. To differentiate these roles we want to use the partner function which is assigned to the sales area.
Can anybody show me how to do the initial load of the CRM system and map the role to the Employee Responsible relationship?
I assume that I have to create a own mapping function module to realize this. Where do I register this function module so it will be used during the initial load? How do I debug these functionality?
A similar functionality we have to build up in case of the upload to the R/3 system. There we have map the Employee Responsible relationship to the specific role and assign it to the customer. Where do I register this function module?
Thanks for your help!
Best regards
Michael

hi
In order to replicate the ECC customer to CRM customer the following steps (tips) might be helpful to you:
First a Mapping structure should exist between business partners in SAP CRM and ERP ECC Customers in both the directions. In the ERP ECC system you can see this mapping using transaction /nPIDE
You should create your own account group for the data transfer from SAP CRM to ERP ECC
In SAP CRM, the roles sold-to party, ship-to party, bill-to party and payer are assigned to the classification Customer and the customer is assigned to exactly one account group in ERP ECC
For consistent distribution of Business Partners with identical numbers in both the systems, the internal number range (ex. 1-5999) should correspond to an external number assignment in the ERP ECC system or vice versa. Thus a business partner is given the same number in both systems.
For data exchange to be successful, you must ensure that the field control (mandatory fields) between the CRM system and the ERP system matches.
Besides Both SAP CRM and SAP ECC can talk to each other only when there is some settings done in the middleware. And for the CRM only a small plugin is needed for the ERP/ECC Connectivity.
Now whenever you have both the system mapped then if you create a BP in CRM it will automatically flow in the ERP System. And also the vice versa. As for the roles are concerned, the roles like ship-to-party and some few specific roles are mapped in ECC system. For a complete look at roles matching have a look at the following link.
http://help.sap.com/saphelp_crm50/helpdata/en/52/cff837a9aae651e10000009b38f8cf/frameset.htm
Once you have created a BP in CRM it will be created in some Account group in ECC. And in that AC GRP you will be not be able to create the Customer with identical ID. So if your systems are connected then even manually you also cannot create same BPs.
And for all of these the PIDE settings in ECC needs to be maintained properly.
Hope it serves your purpose
best regards
ashish

BATCH Management - External number

Hi
I am having a scenario where I need to activate the external number assignment for a batch in a specific plant. ( We do have around 50 plants)
Internal batch number and Automatic batch number assignment is activated at the client level. which is creating worries for me.
with activation of external numbers for batches , I do want to make this mandatory to put external batch at the time of MIGO for Raw materials and CO11N at the time of operation confirmation for finshed goods ( obvisously only for the materials having Batch management check activated in material master )
Grateful if somebody could help me in acheving this..
BR
Sumit

Hello Vikesh
Thanks for the reply.But bro..as I mentioned before also , i caant do the changes mentioned by you as its used by other 10 plants for the same client.
I need to do this for a specific plant only , and We dont want to create batch manually , system should create batch number with external number range for the movement typr 101 ( for raw materials at the time of MIGO and for finished goods at the time of prod.order operation confirmation in CO11N).
Pl coorect me if i am too ambitios for this ..but thts wht we r looking for,,
BR
Sumit Sharma

Automatic number range assignment for creation of material issue

Hi Experts,
I need to create material with automatic assignment of internal and external number range .
Already existing logic for one exit which is working fine in one system and I am using that same logic in other system
where it is not working and throuhging the following error:
"Internal number assignment is not possible for the material type Operating supplies"
Can you please suggest where i am dong wrong ?
Thank you in advance.

Hi,
Please slect material type operating supplies click on detaials. check the external number assignment w/o check checkbox
Regards
AKM

How to get Windows 7 on Bootcamp to see an external hard drive

I run windows 7 on my desktop using parallels and an external hard drive shows up just fine, but when I run windows in bootcamp on my laptop the same external hard drive does not show up. Anyway to fix this or do I need to redo things and install parallels on my laptop to get to work?
I also notice that when that same external hard drive is connected to my desktop computer the drive letter changes. Sometimes time machine will grab the drive letter and the external gets assigned another drive letter which messes with my database programs that run in windows. Is there a way to fix the drive letter I've used in a path in those programs?
And if I do end up having to install parallels on my laptop what is the proper way to go about reformatting and getting ride of bootcamp and windows 7?

Satellite L505D-S5983
Downloads here.
Best to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are properly preinstalled. Windows is preactivated.
If you failed to burn recovery discs, you can obtain them from Toshiba. Scroll down to Get Recovery Media here.
For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 70 of the User's Guide.
Satellite L500 Series User’s Guide
If the new hard disk uses advanced-format technology, be prepared to install a new storage driver first thing.
Intel Rapid Storage Technology
-Jerry

Error in depreciation run- number assignment

HI ALL,
After upgrading to ECC 6.0, I am not able to run the depreciation. I get the below mentioned error
Create document number range 03 using internal number assignment
    Message no. AA776
Diagnosis
    Processing terminated because the document number range 03 for year 2007
    was set up with external number assignment.
System Response
    For periodic posting of depreciation, you have to create a document
    number range with internal number assignment, since the document numbers
    are assigned from Financial Accounting.
Procedure
    Change the number assignment for the number range 03 from external to
    internal in Customizing for Asset Accounting. See SAP Note 890976 for
    more information.
I am not able to change the number assignment from external to internal for no range 03 as the ext tick is greyed
Request your help for the same.
Note 890976 is already applied
help required...pls
Regards,
Kiran

Hi,
First option:
try to delete the 03 number range & create it once again.
Second Option:
go to OBA7   & Select documnet type AF & double click,
change the number range 03 to 04,
then maintain the number range in FBN1 for 04.
maintain this number range as internal ( dont tick teh external button.
Regards
Chandra

RMDATIND uploading problem with external material numbers

Hi,
I'm using LSMW direct input program RMDATIND (Object:0020 Method:0000) for creating materials.
I have a problem with uploading materials which have two types of external material numbers.
For example one material number is 1111-333 and then we have 10000000. The problem is that direct input won't create materials with number 1111-333 though it's possible to create them manually. It works fine with material 10000000.
Does anyone know how fix this issue?

Sweth123 wrote:
Hi Guys:
>
> Clicked check box External number assignment without Check., When I am creating a material (mm01) with only numeric characters it is giving me an eror message saying for this material type Numeric characters are not allowed.
>
> i should be able to create a material with external number range and it can be numeric or alpha numeric?
>
>
> Thanks
> Sweth
Hi,
go to the path Define Number Ranges for Each Material Type click on maintain groups & select the materila type & select the mouse on material type & click on maintain after that maintain the number ranges.
for ex: from 300000000 to 399999999 internal no.range
from A to ZZZZZZ external no.range
from this u can able to create a material with external number range and it can be numeric or alpha numeric
Regards
Raj.

External Number Error in MM01

Dear Gurus,
I tried creating a new material A00001212 in MM01 (Material Master Record), Select material type HAWA, press enter.
System keeps displaying or the systems changes A00001212 in to material 99990 and error shows " Number 99990 not defined for material type HAWA".
I already have assigned HAWA in MMNR - Groups - With External Number. Still the same problem.
from where this 99990 coming from?
Anyone care to share their experiences on this. Thank you.
Regards,
Ber

Hi,
The issue you are getting material type HAWA not assigned to proper Number Range Group text.
Now find out " Number range group text" for external numbering for example:A00001212. In t.code:MMNR,double click HAWA material type and select check box of your "Number Range Group text" and click Element/Group in the Application Bar ( view your HAWA material type is assigned to Number Range Group text) and Save.
You can now create new material A00001212 in MM01 (Material Master Record) by selecting material type HAWA.
For more, refer
Number range for material type
No external number assignment possible for mat. type Semifinished Product
Regards,
Biju K

Mainstage 2 external fader assign to mainstage 2 fader

Similar Messages

Maybe you are looking for