MainStage flat a whole step ???
I just bought MainStage and i'm using is with a Fishman triple play for guitar. When I use instruments in Logic, it's fine. When I'm trying to use MainStage, with the same instruments, my sounds are flat one semitone and a couple of commas. The workaround I found is to insert the transposer down one step on the channel strip AND put the master tuner at 430 Hz to be in tune with my guitar. That's super weird, and not practical as I have to do this on every sound. I checked that the guitar is OK, and on the keyboard on the screen the note is the note of the guitar, also indicated on the fishman interface. So there is really something with Mainstage, but I cannot find out.
Help will be very appreciated. Links to resources to learn to use it quickly would be nice too, as I have a feeling that the sw is very powerful but totally non intuitive to use !
Thanks
Philippe
I just had the same problem .
The real strange thing is ... When I used the the "Tuner" in Logic Pro X
my guitar / tuner plugin worked correctly. ( I tuned the guitar concert/440)
Tuner said said , yep 440
But when I switched over to MainStage 3 Tuner read as flat about a 1/2 step.
Did a restart opened only MS, Still same 1/2 off. Went to Audio preferences
changed couple things and hit "Apply button" Then set them back again to my setting
and again hit apply. Tuner now works correctly.
BTW dhjdhj the sample rate was the same in both apps (MS & Logic) MS just didn't get it together till the "Apply"..... Bug ???
In the "For What It's Worth" category... Logic Pro X (and 9) run much faster and I feel more efficiently
and responsive than MS. MS works my MacBook Pro/CPU harder than a 24 track "Backing Track"
file in Logic (never turns on the fan) Hhhmmmm.....
MacBook Pro, Logic 10.0.7 , MS 3..0.4 & Behringer X32 I/O
Similar Messages
-
Here my reply to question regarding an incorrect Tuner in MS
TinMassOct 7, 2014 1:07 PM Re: MainStage flat a whole step ???
Re: MainStage flat a whole step ???in response to pdelanghe
I just had the same problem .
The real strange thing is ... When I used the the "Tuner" in Logic Pro X
my guitar / tuner plugin worked correctly. ( I tuned the guitar concert/440)
Tuner said said , yep 440
But when I switched over to MainStage 3 Tuner read as flat about a 1/2 step.
Did a restart opened only MS, Still same 1/2 off. Went to Audio preferences
changed couple things and hit "Apply button" Then set them back again to my setting
and again hit apply. Tuner now works correctly.
BTW dhjdhj the sample rate was the same in both apps (MS & Logic) MS just didn't get it together till the "Apply".....
Bug ???
In the "For What It's Worth" category... Logic Pro X (and 9) run much faster and I feel more efficiently
and responsive than MS. MS works my MacBook Pro/CPU harder than a 24 track "Backing Track"
file in Logic (never turns on the fan) Hhhmmmm.....
MacBook Pro, Logic 10.0.7 , MS 3..0.4 & Behringer X32 I/OAha... might be onto something.
It doesn't work in slot 2 if there is a Ren Comp (WAVES) after it. Weird!!! -
So standard electrical output from wall outlets in the US is 110V - 120V, and standard output from wall outlets in South Africa is 220V - 240V. In SA I know I can plug in an iPhone using the iPhone charging cable and it will automatically step down the voltage, thus preventing my phone from overheating. I cannot plug in a hairdryer or flat iron without step down voltage converter in SA. Can I use the charger that came with my US 2011 Macbook Air and plug into a wall outlet in South Africa or do I need to purchase a step down voltage converter in order to charge my laptop while in SA?
You only need a plug adaptor as long as the voltage is between 100 and 240 volts.
(123957) -
hi i am a macbook and at a new job and trying to connect to a printer connected by usb to a windows 7 computer how do i connect to the printer ??? please whole step by step operation no nothing about computers thanks i need the help !!!!!!!
sorry more to add there are 5 pcs all conected using a worksharing on the pc and one pc is connected via usb i can connect to share files but not printing and that took me ages to find out lol please help
-
Process Controlled Workflow - 1-step approval for shopping cart approval
Hi,
I have configured a one-level approval for SC (Process Controlled Workflow):
Object Type: BUS2121
Additional 1 level under schema: 3C_SC_600_000 (the last level is the automatic approval)
Level Type: Approval with completion
Eval ID: 0EV_SC_SL1
RR Name: RR_SPENDING_LIMIT_APPROVER
RR Param: USTONY.Y (I hardcoded it using my user ID, for the moment)
Task ID: 40007953 (I have checked, it's generalized as well)
Decision Type: Item-based decision for entire document
For PPOMA_BBP:
Under my org unit (Position):
Approval Limit: 1000
Output Limit: 1000
I didn't do any BADI implementations yet.
During creation of SC by other user, before "Order" the SC, the approval preview can show correctly that the Processor is as indicated in the config.
Once the SC is ordered, the whole step is gone and the event linkage becoming delinked (because there is error, and according to the config in SWEQADM).
However, I cannot find the workitem (no workitem generated) and SLG1 does not give any clue whatsoever.
I tried debugging method APPROVAL_LIMIT, and it seems fine as well.
Please help, what did I do wrong here?
Thanks,
Tony YHi Sahil,
I even changed to first process level to:
Level Type: Approval
Eval ID: 0EV000
RR Name: RR_MANAGER
RR Param: (Blank)
Task ID: 40007953 (I have checked, it's generalized as well)
Decision Type: Decision for entire document
Under PPOMA_BBP:
I made myself as a head of the org unit with the role manager.
The requester is "Exclude" the role manager.
The agent can be determined now.
But the workitem ID is still cannot be generated. It's always no workitem generated.
Please everyone, any help?
Thanks in advance,
Tony -
Hi All,
we have been using OWB 10.2.0.3 version from past 6 months till now we are loading database to database.
Data base version : 10.2.
OWB version : 10.2.0.3
Server operating system : Sun Solaries (10)
Client operating system : Windows Xp.
I would like to share some information to u and all.
i have installed owb10gr2 on personal PC it has windows Xp operating system. i have one simple mapping for FLAT file.
Steps handled by me to populate data flat file to Database.
i have created one folder in C drive then i have created directory and i gave privilages to access that folder.
i have created external table for flat file manually.
after that i imported external table to mapp target table. it's working fine and data also loading.
i am still getting confuse Flat file handling with SUN SOLARIES OPERATING SYSTEM
How do we handle flat file in UNIX environment.
How create directory and how to give access privilages.
how to create EXTERNAL table with OWB.
Could u please help me
Regards.
venkat.Hi,
i have logged in sys and i created directory then gave privilages to 'c:\test_file'.... test_file is folder name which i created folder in windows PC. server is SUNSOLARIS.
in OWB i have created table based on that file with delimited. below mentioned column names and values.
no name sal coom
100 aa 10000 1000
200 bb 20000 2000
300 cc 30000 3000
400 dd 40000 4000
after that i have created external table under source module and then deployed that table in database table has created sucessfully but while using select statement it's showing error.
ex: select * from table ( error)
ORA-29913 error in executing ODCIEXTTABLEOPEN callout
ORA-29400 data cartridge error
KUP-04040 file abc.csv in test_v_s_loc not found
ORA-06512 at "sys.ORACLE_LOADER",line 19
i have done/given privilages like below
create or replace directory sample_owb as 'C:\test_file'
grant read,write on directory sample_owb to ods_inb_stg
what is the cause and how to handle and resolve. could u please help me.
regards,
venkat. -
SQUEEZE MODE 24p - Panny DVX100A - steps
i've been looking for a tutorial on all the steps for capturing + editing + exporting to DVDSP4 for footage shot in 24p Squeeze Mode on a Panasonic DVX100A.
anyone know of where i can find that. i've found tips..advice etc..but not a whole step by step guide that covers EVERYTHING.
thanks!!!
dual 1.8 G5 Mac OS X (10.3.9)Just capture it as DV 48K Anamorphic. Edit in a DV 48K Anamorphic sequence at 29.97fps.
If you shot 24pa, you can capture as DV 48K Anamorphic 23.98. Edit in a DV 48K Anamorphic 23.98 sequence at 23.98 fps.
With either of these, you can simply export with "current settings," then import that file into DVD Studio Pro. DVDSP will accept either 29.97 or 23.98 files. DVD players will adjust and play it properly on any TV.
DVDSP doesn't always see the anamorphic flags, however, so sometimes you have to tell it that the file is anamorphic.
If you want more control over the compression stage, you can take your FCP exported file into Compressor and compress it, then take those files into DVDSP. Otherwise, DVDSP usually does a pretty good job of compressing your file. -
Hi Friends,
I don't know much about PI sheet, that's why I require whole step to be followed to implement or config PI sheet at my process industries. currently we working without using PI sheet.
please provide doc. step by step so that I can config PI sheet in my organisation because this is our business plan to implement.
Please Help
Thanks/Regards
ParminderDear,
Logistics --> Production Process --> Process Management --> PI Sheet --> CO58 - Maintain
1)Double Click CO58 & Enter PI sheet No.it can be searched by pressing F4.
2)Maintain the value and note the instructions.
3) click the NOTE button & Maintain the data in the PI sheet
4) click the REPORT DATA button at the top and open on report data screen
5) select the both operation line & click on REPORT button at the top.
6) The Message appears at the bottom Data has been reported and then save it.
This is steps you can maintain the PI SHEET.
CONFIGURATION STEPS:
1) SPRO-->PPPI --> PROCESS MANAGEMENT --> CONTROL RECIPE/PI SHEET --> DEFINE & SETUP CONTROL RECIPE DESTINATIONS
2) SPRO-->PPPI --> PROCESS MANAGEMENT --> CONTROL RECIPE/PI SHEET --> SELECTION VARIANTS FOR PI SHEET --> DEFINE SELECTION VARIANTS FOR PI SHEET
3) SPRO-->PPPI --> PROCESS MANAGEMENT --> CONTROL RECIPE/PI SHEET --> SELECTION VARIANTS FOR PI SHEET --> ASSIGN SELECTION VARIANTS FOR PI SHEET
4) SPRO-->PPPI --> PROCESS MANAGEMENT > PROCESS INSTRUCTIONS> DEFINE PI CATEGORIES FOR PI SHEET.
You should foolw these above configuration steps in PI sheet.
You can maintain all datas in PI sheet.
If it is useful, Please rewards the correct points
Please refer the link,
[PI sheet|https://forums.sdn.sap.com/click.jspa?searchID=16784584&messageID=4114093]
[Thread.|https://forums.sdn.sap.com/click.jspa?searchID=16784584&messageID=5870544]
Regards,
R.Brahmankar -
First time through iTunes match found about 13000 matched songs and needed to upload about 4000. It ran for about 30 hours and completed about 1000 uploads before it crashed/hung. After I restarted it (reboot) it quickly (relative term!) got to the point of having to upload the remaining 3000; so the good news is that the 13000+1000 songs are in the cloud. The bad news is that it now hangs repeatedly on the first of the songs it is trying to upload.
So I restarted iTunes and stopped iTunes match before it could hang. Deleted all the songs marked 'waiting' out of iTunes and told iTunes match to start again. The 3000 songs that had not been uploaded were shown as available for 'download from iCloud' but greyed out. So I then deleted them from iCloud too. iTunes match now completes and tells me there are about 14000 songs available. (I'd already deleted all the ineligible, error and duplicates).
Now here's the interesting bit... if I add one more song to iTunes, iTunes match hangs on step 2 saying matched 14000 of 14001 songs. I can delete that new song from iTunes and iCloud and the match process completes saying I've got 14000 songs. This is completely repeatable for any random song from the 3000 yet to be uploaded.
Also... I deleted two songs that had successfully been added to the cloud (one uploaded and one matched). Run iTunes match again and now it completes showing 13998 songs. Now adding the two deleted songs back iTunes match hangs in step 2 with 13988 of 14000 songs checked.
So what's going on here? Obviously not a poisonous song as trying to upload a song that had previously succeeded now fails. The local and iCloud databases seem to be ok as the process goes to completion without the extra song. Doesn't seem to be an iTunes match server overload as when you tell it to update iTunes match (with only the 14000 songs that are already uploaded) it goes through the whole step 1/2/3 process.
Other threads seem to indicate that the iTunes match servers are overloaded. Could be... but just hanging is not good user feedback. Is there any way to tell for sure? If I a wait a day/week/month is it going to be fixed?
(All the numbers rounded... but you get the idea!).
Any ideas where to look next?
iTunes 10.5.2.11 on Win XP SP3I'm pretty certain that it is an overload issue, that has caused a more serious problem for some users.
At first I thought that it was a track that was causing the problem, and did some deleting similar to what you did with the same results. I then remembered that new countries had been added, came here and saw that others were having exactly the same problem.
The fact that so many people are suddenly having an identical problem at the same time means that it is extremely likely to be a problem at Apple's end (we certainly haven't all just got to a tricky track at the same time). That it is related to the new countries coming online is an assumption, but it has to be quite likely.
It needs reporting to Apple, so they can tell that it is a significant issue, but there really is little else we can do at the moment.
If it is a problem at Apples end then it is extremely likely that it will get fixed pretty quickly. The fact that it has frozen, rather than just running slowly, suggests that something has actually gone wrong, rather than just being network traffic. This will probably mean that it needs fixing, rather than just waiting for the traffic to subside, but I'd imagine that it is being dealt with now, especially if it is being reported. -
How can I transfer my whole work to network environment
Hi all,
Till now I was working on my desktop wid an individual db schema with ODITool.
Now i want to shift my work to AIX server and also I have to work wid different schema.
So need your suggestion how to execute this task so that my package diagram and other stuff required minimul changes.
* Is it required to export my master and work repository for that purpose?
*If I want to import only few packages out of my whole work then what should I do?
* If I want to pass my work to testing team what kinda enviroment they need. hould they
waiting for ur suggestion.............
regards,
Palash ChatterjeeHi Romanna,
thanks for ur reply,I have used this appproach for the first time when I was trying to develop everything in a new schema.Suppose each time while a new package is ready to test I have to pass it on to the testing team in their environment so
Is it feasible to do the whole step again..
* May be I am not getting u correctly
but requirement is to provide testing and development as almost a simultaneous process .So what wud be the best solution of export/import which can provide me minimul hazard to work in different environment.
regards
Palash Chatterjee -
OLE DB Destination" failed validation and returned validation status "VS_ISBROKEN.
Hi
I have a package which has 10 sequence containers. Have 10 Flat File Source files and all is working perfect on BI Debug mode. When I deploy this package to server I am getting the following error.
I have changed the property Retain the same connection = True but same problem. I have changed the data flow task to Load Project instead of Load Into Project but in error message it is still showing the old name. I have tried to remove the whole step i.e.
Removed Load into Project Data flow with sequence container but I am getting the same error message.
I am not able to understand the reason. Any Idea why am I getting the same error message even I do not have the Data Flow named Load Into Package. It is in SSIS 2008 and being deployed on SQL 2012 server.
Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 15:28:32 Error: 2014-07-22
15:28:36.86 Code: 0xC020201B Source: Load Into Project OLE DB Destination [62] Description: The number of input columns for OLE DB Destination.Inputs[OLE DB Destination Input] cannot be zero. End Error Error:
2014-07-22 15:28:36.86 Code: 0xC004706B Source: Load Into Project SSIS.Pipeline Description: "OLE DB Destination" failed validation and returned validation status "VS_ISBROKEN". End Error
Error: 2014-07-22 15:28:36.86 Code: 0xC004700C Source:
Load Into Project SSIS.Pipeline Description: One or more component failed validation. End Error Error: 2014-07-22 15:28:36.87 Code: 0xC0024107 Source: Load Into Project Description:
There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 15:28:32 Finished: 15:28:36 Elapsed: 4.39 seconds. The package execution failed. The
step failed.
Many Thanks.
MH
this the error log
starttime
endtime
event
source
message
57:26.0
57:26.0
OnError
Load Into Project
The number of input columns for OLE DB Destination.Inputs[OLE DB Destination Input] cannot be zero.
57:26.0
57:26.0
OnError
Load Into Project
OLE DB Destination failed validation and returned validation status "VS_ISBROKEN".
57:26.0
57:26.0
OnError
Load Into Project
One or more component failed validation.
57:26.0
57:26.0
OnError
Load Into Project
There were errors during task validation.
57:19.0
57:19.0
OnPostExecute
Load Into TrialBalance
57:19.0
57:19.0
OnPostExecute
Trial Balance
57:19.0
57:19.0
OnPostExecute
SSIS_LoadCheck_CoreManGroup
57:19.0
57:19.0
PackageEnd
SSIS_LoadCheck_CoreManGroup
End of package execution.
57:18.0
57:18.0
OnPostExecute
Load Into JournalLine
57:18.0
57:18.0
OnPostExecute
JournalLine
57:18.0
57:18.0
OnPreExecute
Trial Balance
57:18.0
57:18.0
OnPreExecute
Truncate TrialBalance
57:18.0
57:18.0
OnPostExecute
Truncate TrialBalance
57:18.0
57:18.0
OnPreExecute
Load Into TrialBalance
57:07.0
57:07.0
OnPostExecute
Load Into Journal Type
57:07.0
57:07.0
OnPostExecute
JournalType
57:07.0
57:07.0
OnPreExecute
JournalLine
57:07.0
57:07.0
OnPreExecute
Truncate Table JournalLine
57:07.0
57:07.0
OnPostExecute
Truncate Table JournalLine
57:07.0
57:07.0
OnPreExecute
Load Into JournalLine
57:05.0
57:05.0
OnPostExecute
Load Into UserName
57:05.0
57:05.0
OnPostExecute
UserName
57:05.0
57:05.0
OnPreExecute
Business Area
57:05.0
57:05.0
OnPreExecute
Truncate Table Business Area
57:05.0
57:05.0
OnPostExecute
Truncate Table Business Area
57:05.0
57:05.0
OnPreExecute
Load Into Business Area
57:05.0
57:05.0
OnPostExecute
Load Into Business Area
57:05.0
57:05.0
OnPostExecute
Business Area
57:05.0
57:05.0
OnPreExecute
Cost Centre
57:05.0
57:05.0
OnPreExecute
Truncate CostCenter
57:05.0
57:05.0
OnPostExecute
Truncate CostCenter
57:05.0
57:05.0
OnPreExecute
Load Into Cost Centre
57:05.0
57:05.0
OnPostExecute
Load Into Cost Centre
57:05.0
57:05.0
OnPostExecute
Cost Centre
57:05.0
57:05.0
OnPreExecute
Project Status
57:05.0
57:05.0
OnPreExecute
Truncate Table Project Status
57:05.0
57:05.0
OnPostExecute
Truncate Table Project Status
57:05.0
57:05.0
OnPreExecute
Load Into Project Status
57:05.0
57:05.0
OnPostExecute
Load Into Project Status
57:05.0
57:05.0
OnPostExecute
Project Status
57:05.0
57:05.0
OnPreExecute
Project
57:05.0
57:05.0
OnPreExecute
Truncate Table Project
57:05.0
57:05.0
OnPostExecute
Truncate Table Project
57:05.0
57:05.0
OnPreExecute
Load Project
57:05.0
57:05.0
OnPostExecute
Load Project
57:05.0
57:05.0
OnPostExecute
Project
57:05.0
57:05.0
OnPreExecute
JournalType
57:05.0
57:05.0
OnPreExecute
Truncate Table Journal Type
57:05.0
57:05.0
OnPostExecute
Truncate Table Journal Type
57:05.0
57:05.0
OnPreExecute
Load Into Journal Type
57:03.0
57:03.0
OnPostExecute
Load Into Entity
57:03.0
57:03.0
OnPostExecute
Entity
57:03.0
57:03.0
OnPreExecute
Account
57:03.0
57:03.0
OnPreExecute
Truncate Table Accounts
57:03.0
57:03.0
OnPostExecute
Truncate Table Accounts
57:03.0
57:03.0
OnPreExecute
Load Into Account
57:03.0
57:03.0
OnPostExecute
Load Into Account
57:03.0
57:03.0
OnPostExecute
Account
57:03.0
57:03.0
OnPreExecute
UserName
57:03.0
57:03.0
OnPreExecute
Truncate Table User Name
57:03.0
57:03.0
OnPostExecute
Truncate Table User Name
57:03.0
57:03.0
OnPreExecute
Load Into UserName
57:02.0
57:02.0
PackageStart
SSIS_LoadCheck_CoreManGroup
Beginning of package execution.
57:02.0
57:02.0
OnPreExecute
SSIS_LoadCheck_CoreManGroup
57:02.0
57:02.0
OnPreExecute
CoA
57:02.0
57:02.0
OnPreExecute
Truncate Table CoA
57:02.0
57:02.0
OnPostExecute
Truncate Table CoA
57:02.0
57:02.0
OnPreExecute
Load Into CoA
57:02.0
57:02.0
OnPostExecute
Load Into CoA
57:02.0
57:02.0
OnPostExecute
CoA
57:02.0
57:02.0
OnPreExecute
Entity
57:02.0
57:02.0
OnPreExecute
Truncate Table Entity
57:02.0
57:02.0
OnPostExecute
Truncate Table Entity
57:02.0
57:02.0
OnPreExecute
Load Into EntityMessage
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 15:28:32 Error: 2014-07-22
15:28:36.86 Code: 0xC020201B Source: Load Into Project OLE DB Destination [62] Description: The number of input columns for OLE DB Destination.Inputs[OLE DB Destination Input] cannot be zero.
22 15:28:36.86 Code: 0xC004700C Source: Load Into Project 22 15:28:36.87 Code: 0xC0024107 Source: Load Into Project Description: There were errors during task validation. End
Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 15:28:32 Finished: 15:28:36 Elapsed: 4.39 seconds. The package execution failed. The step failed.
Hi MustafaH,
According to the error message(hightlight above), it seems it's a mapping issue that Naarasimha point out in the post above. Please check this carefully.
An OLE DB destination includes mappings between input columns and columns in the destination data source. You do not have to map input columns to all destination columns, but depending on the properties of the destination columns, errors can occur if
no input columns are mapped to the destination columns.
Reference form: http://msdn.microsoft.com/en-us/library/ms141237.aspx
In your post, you said that it is in SSIS 2008 and being deployed on SQL 2012 server. Do you mean that you create the package deployment utility by using SSIS 2008, and then implement SSIS deployment in SSIS 2012 environment? If so, you need to
convert the project to package deployment model to generate Manifest file in SSIS 2012. Please see:
Use the SQL Server 2008 version of Business Intelligence Development Studio to develop and maintain packages that are based on SQL Server 2008 Integration Services (SSIS)
Use SQL Server Data Tools - Business Intelligence for Visual Studio 2012 to develop and maintain packages that are based on SQL Server 2012 Integration Services (SSIS).
For more information, please see:
Interoperability and Coexistence (Integration Services):
http://msdn.microsoft.com/en-us/library/bb522577.aspx?ppud=4
If you have any feedback on our support, please click
here.
Elvis Long
TechNet Community Support -
How do I set the range of pitch bend for the EFM-1?
Hi folks,
I have a simple patch for my EFM-1 and I want to apply a pitch bend in Mainstage. It is presently set up to go a whole step up or down when the pitch bend is pushed all the way up (or down). I probably set it up that way.....but I can't for the life of me remember how I did it, or how to change it. For this particular patch, I need the pitch bend to go an octave. Where do I set this usually easy-to-find parameter? Is there a global setting? (It seems to be set for a whole step for all patches). A setting within the EFM-1?
Thanks!
-Mike KaplanHi
Mike Kaplan wrote:
Hi folks,
I need the pitch bend to go an octave. Where do I set this usually easy-to-find parameter? Is there a global setting? (It seems to be set for a whole step for all patches). A setting within the EFM-1?
It does not look like there is a Bend Range parameter for the EFM1???
CCT -
Install Guide - SQL Server 2014, Failover Cluster, Windows 2012 R2 Server Core
I am looking for anyone who has a guide with notes about an installation of a two node, multi subnet failover cluster for SQL Server 2014 on Server Core edition
Hi KamarasJaranger,
According to your description, you want configure a SQL Server 2014 Multi-Subnet failover Cluster on Windows Server 2012 R2. Below are the whole steps for the configuration. For the detailed steps about the configuration, please download
and refer to the
PDF file.
1.Add Required Windows Features (.NET Framework 3.5 Features, Failover Clustering and Multipath I/O).
2.Discover target portals.
3.Connect targets and configuring Multipathing.
4.Initialize and format the Disks.
5.Verify the Storage Replication Process.
6.Run the Failover Cluster Validation Wizard.
7.Create the Windows Server 2012 R2 Multi-Subnet Cluster.
8.Tune Cluster Heartbeat Settings.
9.Install SQL Server 2014 on a Multi-Subnet Failover Cluster.
10.Add a Node on a SQL Server 2014 Multi-Subnet Cluster.
11.Tune the SQL Server 2014 Failover Clustered Instance DNS Settings.
12.Test application connectivity.
Regards,
Michelle Li -
Upgrade to 7.5.2 broke WDS network
For the past 6 months I have used a Time Capsule and 2 Airport Express to configure a WDS network. The TC is the Main station and then I have one AE as a relay and one as a remote station. It has worked perfectly fine until I was prompted to upgrade.
For what I can tell, both the TC and the Relay are now running on the firmware 7.5.2 but the Relay is no longer working. It no longer shows up in the Airport Utility and if I reset it and reconfigure it, the update ends up with the cryptic message "An error occurred while reading the configuration. Make sure your AirPort wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-6753)"
I'm not sure what to do at this point. I tried to revert to the previous firmware but that didn't work either, I'm getting a similar error... Has anybody run into the same issue or has a suggestion on what to do to get it back working again?
ThanksI came across the same issue.
I have a simple set up: just have two AE, one main and the other relay. (I used to have four AEs previously, but got rid of those when N version came out, though configured them as WDS in case I needed to add an extra)
Anyways, I read on another thread that one should update firmware to 7.5.2 of all relay(s) and remote(s) first, before updating the main station's firmware.
Not sure if that's true, but if it is, it's a real shame AU doesn't just stop you from screwing it up, as it knows which base is doing what in the WDS you've set up.
So.. I had just updated the main, and upon updating the relay, AU failed to "see it" appear again - never came back from reboot. And from that point onwards my WDS was dead.
I tried a full reset, reconfigured everything from scratch, both AEs now being in 7.5.2, but WDS would refuse to work - checked the log file and found the main station complaining with the following line over and over (ie. kept on associating/disassociating):
Dec 28 19:49:30 Severity:5 Deauthenticating with station XX:XX:XX:XX:XX:XX (reserved 2).
So, after checking other threads, and googling some more, I just gave up (for now) and put the main AE as Wifi network creator, and the other AE set to join&extend the network.
I really wish the team @ Apple could make some improvements on WDS... or check if something's wrong with latest firmware. I mean, it could be me goofing up somewhere, but I reset both boxes 3 times (ie. redid the whole steps for WDS creation from scratch thrice..) and I've set up WDS before — until this last "rogue" 7.5.2 update came along, it was working perfectly.. kinda wish I didn't update sometimes
Anyways, for now I'm staying away from WDS, cuz for me it's broken -
How to install CC on a second computer
I have the whole CC platform installed on my Apple pro computer
However I need to install just Premiere on a second computer (windows based) because I need to burn DVDs from this second computer (dont have CD burner on the Apple, long story, basically just wanted to save money and I thought I always had this second computer) I already have instructions about Encore CS6 and the whole steps to follow
Well this might seem like a silly question, but Ive been looking everywhere and I just cant find a link to download the application. When I bought the whole CC platform I was told I could download it on a second computer for my own personal use but everytime I follow pages I always go back to this page:
Cloud-based creative software and services | Adobe Creative Cloud
and if it starts asking question as if I was going to purchase CC for the first time. Im already log into adobe and I can see my payment plan but I dont see any link to download the CC application.
If you guys can help me out with a link it would be greatly appreciated, thank youCS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 will help
The bottom section of the link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and the TWO ADDED downloads for the Encore library content, to author a DVD or BluRay... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173
Maybe you are looking for
-
Default port for J2SE Adapter Engine?
Hello all, what is the default port for J2SE Adapter Engine? How do I restart this adapter engine? Regards, N.S
-
I have an imac with snow leopard and really wish there was a how to database in the computer for this !!! I still love this computer tho. Thanks in advance for any help!!
-
Apple TV (2) refuses to stream, getting 2 hour downloads before it will even start help D
-
Obi publisher 11.1.1.6 error
Hi all, while creating report in 'Oracle BI publisher 11g', I am getting the below error, Can any body knows this? If so pls give me the solution to overcome this error. Failed to load: js/xdo/app/designer/ribbon/tabs/groups/template/PaperGroup.tmpl
-
Why the test report's failure chain only display the first failure?
Hi All, why the test report's failure chain only display the first failure step?how to get all the failure steps in the failure chain? Thanks a lot. BR Johnny